- ntg-context - NTG Mailing Lists

Strange behavior in a table.
by Fabrice Couvreur 29 Aug '14

29 Aug '14

Everything is in the title, thank you. \starttext \`A l'aide du graphique, compléter les tableaux de correspondance suivants. \blank[small] {\setupTABLE[row][even][height=0.6cm] \setupTABLE[row][odd][height=0.6cm] \setupTABLE[1][1,2][width=3.2cm] \setupTABLE[column][2,3,4,5,6,7][width=0.14\textwidth] \bTABLE[align={middle,lohi}] \bTR \bTH {Hauteur en dm} \eTH \bTD {0} \eTD \bTD {0,5} \eTD \bTD {1} \eTD \bTD {1,5} \eTD \bTD {2} \eTD \bTD {2,5} \eTD \eTR \bTR \bTH {Volume d'eau en L} \eTH \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \eTR \eTABLE \blank[small] \bTABLE[align={middle,lohi}] \bTR \bTH {Volume d'eau en L} \eTH \bTD {1} \eTD \bTD {2} \eTD \bTD {3} \eTD \bTD {4} \eTD \bTD {5} \eTD \bTD {10} \eTD \eTR \bTR \bTH {Hauteur en dm} \eTH \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \eTR \eTABLE} Les graduations obtenues n'étant pas assez fines, Pascal demande à son gendre de préciser ses calculs. La suite de l'histoire ...plus tard. \stoptext

3 2

hyperlinks with special characters
by Prashanth N Rao 29 Aug '14

29 Aug '14

I have already asked this question on Stackexchange. It appears that no one who has seen the question knows an answer. I figure I'll ask here too, just to cover all bases. I need to link to some online resources in my PDF file. Based on the official documentation, I have written: > \useURL[dbdk] [http://dbpedia.org/page/The_Dark_Knight_(film)] [] [it's link to DBPedia] > > Lorem ipsum \goto{the LinkedMDB.org entry on The Dark Knight}[url(http://data.linkedmdb.org/page/film/6224)], and \from[dbdk] dolor sit amet. Note my code for the link to DBpedia: I had to write it in this convoluted way, instead of using my preferred \goto, because the link has the special characters, `(` and `)`. These characters interfered with `url()`. I can't use HTML's URL encoding scheme because the `%`s interfere with TeX. Is there another escape code format in ConTeXt for use within `\goto{...}[url(...)]`? Using the suggestion by @phg, I tried the following: > \startasciimode > Lorem ipsum \goto{the LinkedMDB.org entry on The Dark Knight}[url(http://data.linkedmdb.org/page/film/6224)], and \goto{it's link to DBPedia}[url(http://dbpedia.org/page/The_Dark_Knight_%28film%29)] dolor sit amet. > \stopasciimode I still had to use escape codes, `%28` and `%29`, to keep it from interfering with url(). It turns out that DBpedia does not like these codes, and requires the actual characters. Is there another way I put them in `\goto{...}[url(...)]`? Thanks! Prash

2 2

Itemize and framed
by Fabrice Couvreur 29 Aug '14

29 Aug '14

Hi, Is this the best way to insert a list in a frame ? thank you, Fabrice \setupcolors[state=start] \definecolor[H1prime][c=0.50, m=0.00, y=1.00, k=0.00] \definecolor[H4][c=0.07, m=0.00, y=0.15, k=0.00] \starttext \framed[corner=06,frame=on,framecolor=H1prime,location=middle,background=color,backgroundcolor=H4]{% \rbox{ \startitemize[1] \item planter le piquet 1 à côté de l'arbre 1 ; \item aligner le piquet 1, le piquet 2 et les deux arbres puis fixer les piquets 3 et 4 ; \item se placer de manière à être aligné avec l'arbre 2 et le piquet 3 d'une part ; et avec l'arbre 1 et le piquet 4 d'autre part. \item mesurer sa distance à l'arbre 1 ; \item rechercher, dans le tableau, la distance correspondante entre les deux arbres. \stopitemize}} \stoptext

4 4

Startparagraph oddities
by Rik Kabel 29 Aug '14

29 Aug '14

There appears to be an inconsistency in the implementation of \startparagraph. When it is used with one argument (or two by my reading of the source) it defines \stopparagraph with a terminal \endgraf, yet with no arguments this is not done. Strangely (to me) it also appears to insert a line-break before \startparagraph[]. The example below demonstrates these issues. I would expect to have \endgraf inserted with each \stopparagraph regardless of the argument count. There is also a wiki issue with overloading of the command name \startparagraph. The existing command entry points to the paragraphs mechanism for setting up parallel paragraphs in columns. There is also a \startParagraph command described for the t-pararef module. There is no mention of \startparagraph in the \startsection page, which might be an appropriate place. Perhaps some Wikipedia-style disambiguation mechanism is needed. \starttext \startparagraph One \stopparagraph \startparagraph Twee \stopparagraph \startparagraph Drie \stopparagraph \startparagraph[] One \stopparagraph \startparagraph Twee \stopparagraph \startparagraph Drie \stopparagraph \stoptext -- Rik Kabel

2 1

XML, XHTML, and HTML export issue with & in URL
by Rik Kabel 28 Aug '14

28 Aug '14

With the following example, the output xml writer fails to properly transform & to the html entity & in some urls; \hyphenatedurl works fine. The generated xhtml and html files have this problem as well as more issues with the transformation, including what appears to be mistaken transformation of < and > to html entities and unbalanced <link> tags. When a URL without & is used, the problems do not appear. I used the default export-example.css file, and I assume that the lack of interaction in the result reflects the lack of coding for links in that file. This was tested with the 2014-08-27 standalone. \setupbackend[export=xmltest.xml,xhtml=xmltest.xhtml,css=export-example.css] \setupinteraction[state=start] \useURL[avecAmpersand] [http://www.mail-archive.com/search?l=ntg-context@ntg.nl&q=Epub] [][klik hier] \starttext \startsubject[title=Fails in xml] \startparagraph \tex{from}: \from[avecAmpersand] \stopparagraph \startparagraph \tex{goto&[url]}: \goto{klik hier}[url(http://www.mail-archive.com/search?l=ntg-context@ntg.nl&q=Epub)] \stopparagraph \stopsubject \startsubject[title=Okay in xml] \startparagraph \tex{url}: \url[avecAmpersand] \stopparagraph \startparagraph \tex{hyphenatedurl}: \hyphenatedurl{http://www.mail-archive.com/search?l=ntg-context@ntg.nl&q=Epub} \stopparagraph \stopsubject \stoptext -- Rik Kabel

2 1

Font (roboto) and math font - error
by Zenlima 27 Aug '14

27 Aug '14

Hi, I am switching all my docs to the roboto font as I just like the look of that font. During this I ran into a problem with \item: ! Math error: parameter \Umathquad\displaystyle is not set. .. l.26 \item h ere we list the points, In my example: as soon I enable any of the two \definetypeface lines I am running into that error.. even if I only enable the math font. Every hint is welcome :) Here is my example to reproduce the error: ---8<------ \enableregime[utf]  \definefontfeature[fakesc][default][size=.8]  \starttypescript [sans] [roboto]  \definefontsynonym[Sans][name:robotolight][fallbacks=Sans] \definefontsynonym[SansBold][name:robotoregular] \definefontsynonym[SansItalic][name:robotolightitalic] \definefontsynonym[SansSlanted][name:robotolightitalic] \definefontsynonym[SansBoldItalic][name:robotoregularitalic] \definefontsynonym[SansBoldSlanted][name:robotoregularitalic] \definefontsynonym[SansCaps] [name:robotolight][features=fakesc] \stoptypescript \starttypescript [math] [latinmodern] \definefontsynonym[Math][name:latinmodernmathregular] \stoptypescript  \definetypeface[fliesstext][ss][sans][roboto] \definetypeface[fliesstext][mm][math][latinmodern][default]  \setupbodyfont[fliesstext,ss,11pt]  \starttext  \startitemize  \item here we list the points,  \item one after the other.  \stopitemize \stoptext

2 2

changing pre-fuzzy stlye
by Pau 27 Aug '14

27 Aug '14

Dear all, I am preparing a presentation using pre-fuzzy and I would like to make a modification without altering the style if possible. It turns out that the meeting I am attending is not using a projector but a kind of huge monitor with very low frequency and, as a result, a bright background is unpleasent on the eyes because of that frequency. I would like to change the background to black and the text to white. I am unsure where to do this without modifying the main file for the style pre-fuzzy. Any hint will be appreciated. thanks

2 1

\in, \at but without font/color change in the PDF
by Gerben Wierda 26 Aug '14

26 Aug '14

Suppose I want to make a fully classical flat text without interaction (no clickable links in the PDF). How do I get this? If I use \in or \at, ConTeXt turns them into clickable links. That is not my problem so much, but it also changes font to bold and colour to green, and I do not want that. What do I need to do to make the text classic, that is without font and colour change? G

2 1

bibliography problems
by Gerben Wierda 26 Aug '14

26 Aug '14

I have set up: \setuppublications[numbering=short] \setupcite[short] but the \cite commands show (Author, Year) and not the short code and the \placepublications does not indent the entries enough, hence the item entry’s first column (the short code) overlaps with the actual entry. How do I fix these? Can’t find it on the wiki or in the bibmod-doc.pdf G

1 1

issues with footnotes
by Pablo Rodriguez 25 Aug '14

25 Aug '14

Dear list, using beta from 2014-08-21 09:59, I’m trying to generate a document that has two bodies of notes: footnotes and linenotes. Since the document isn’t minimal, I include only the notes definitions: \definenote[dict] \setupnote[dict][setups=setups:linenote, n=2, rule=off, split=verystrict, scope=text, inbetween=\hskip1.5em] \setupnotation[dict][number=no, width=broad] \definelinenote[grammatical] \setupnote[grammatical][setups=setups:linenote, rule=off, paragraph=yes, split=verystrict, scope=text, inbetween=\hskip1.5em, compress=yes] \setupnotation[grammatical][numbercommand=, alternative=serried, distance=1em] The output can be found at http://www.ousia.tk/unbalanced-columns.pdf. In all four pages, columns in footnotes are unbalanced. Is there any way to get balanced columns in footnotes? The second issue is that the columnar footnotes don’t respect space before and after defined in \setupnote. How can I avoid this? (BTW, this also happens with the space before when paragraph=yes.) BTW, if I add the following code to avoid widows and orphans: \setuplayout[setups=*lessstrict] \startsetups[*lessstrict] \setup[reset] \widowpenalty=10000 \clubpenalty=10000 \brokenpenalty=0 \stopsetups The footnotes aren’t displayed in columns at all (http://www.ousia.tk/no-columns.pdf) Is there no way that I can avoid widows and orphans for the body text? Many thanks for your help, Pablo -- http://www.ousia.tk

1 0