ntg-context February 2008

ntg-context@ntg.nl

58 participants
91 discussions

Overfull boxes using m-cweb
by Edwin Wisse 27 Jan '16

27 Jan '16

Hello, I am running into overfull boxes when including a weaved cweb file into a context document. The original reference to the cwebmac.tex file (the plain TeX macro) is commented out and replaced by \usemodule[cweb]. The cweb macros appear to expand something into \*11ptmmmt* which seems to have something to do with it. Is there anyone here with experience and deep (Con)TeX(t) knowledge who understands what is happening? Regards, Edwin ----------------------------------part of my log file------------------------------------------------ Overfull \hbox (6.4885pt too wide) in paragraph at lines 3--13 \*11ptmmmr* for the ap-pli-ca-tion de-vel-op-ment mod-ule. This is a small ap-p li-ca-tion which loads file \hbox(7.63889+2.13889)x398.33858 .\*11ptmmmr* f .\*11ptmmmr* o .\*11ptmmmr* r .\glue(\spaceskip) 3.66628 .\*11ptmmmr* t .etc. Overfull \hbox (8.38132pt too wide) in paragraph at lines 3--13 \*11ptmmmr* with point and line da-ta and dis-plays it in a win-dow. It pro-vid es a us-er in-ter-face al- \hbox(7.63889+2.13889)x398.33858 .\*11ptmmmr* w .\*11ptmmmr* i .\*11ptmmmr* t .\*11ptmmmr* h .\glue(\spaceskip) 3.66628 .etc.

4 4

compound titles, lists and headers
by Henning Hraban Ramm 26 Sep '10

26 Sep '10

Dear list, my publisher forces me to set different things as titles, in headers and table of contents. In some cases \nolist and \nomarking aren't enough. here are my actual definitions: ---- \def\Untertitel#1{\blank[3pt]{\ss\bf #1}\blank} % ok \def\Titel#1#2{{\nohyphens\chapter{#1}\Untertitel{#2}}} % ok \def\KomplexTitel#1#2#3{{\writetolist[chapter]{#3}\nohyphens\title{#1}\U ntertitel{#2}}} ---- with ---- \start \setupheadertexts[][manual entry][part][] % normally defined as [][chapter][part][] \KomplexTitel{Main chapter title}{chapter subtitle}{toc entry} Much text \stop % of other headertext ---- Real life example: \start \setupheadertexts [][Vorwort][][] \KomplexTitel{Die neutrale Schweiz und das globale Dorf}% {Vorwort von Prof.|~|Dr.|~|Heinrich Ott}% {Vorwort Prof.|~|Dr.|~|Heinrich Ott:\\Die neutrale Schweiz und das globale Dorf} ... Now there stay two issues: 1. I'd like to get a four-parameter command that can set the header text also. 2. I must get a line feed into the toc, but neither \\ nor \crlf works. Please help! Thanks. Grüßlis vom Hraban! -- www.fiee.net/texnique/ www.ramm.ch/context/

5 10

Bib module and prefix=+
by Robin Kirkham 19 Dec '08

19 Dec '08

Hi, How can the bib module and \setuphead[chapter][prefix=+] be made to coexist? The following example works, but if you uncomment the \setuphead, the citations are broken and the reference list vanishes: \setupoutput[pdftex] % uncomment this line and it breaks %\setuphead[chapter][prefix=+] \usemodule[bib] \usemodule[bibltx] \setupbibtex[database={xampl.bib}] \setuppublications[refcommand=num] % makes no real difference %\setuppublicationlist[title=\chapter] \version[temporary] \starttext \chapter[chapt]{A Chapter} Some citations: \cite[article-full] \cite[inbook-full] \cite[manual- full]. This is chapter~\in[chapt]. \completepublications[criterium=all] \stoptext Any help much appreciated! PS: The following old mailing list article appears to describe the same problem, but the symptoms are different (citations disappear, but reference list does not) http://archive.contextgarden.net/message/ 20010516.173217.113e3787.en.html Robin

3 8

Change line spacing of the publication list
by Roy Zuo 08 Nov '08

08 Nov '08

Hi, I find that when the lines pacing of the text is set by \setupinterlinespace, the line spacing of publication list is not affected at all. I am just wondering if it is possible to change the line spacing of the publication list produced by bibtex to make the article have a uniform look. Thanks in advance. Roy

3 3

Feature Request: \startitemize[text]
by Aditya Mahajan 21 Oct '08

21 Oct '08

Hi Hans, I have always found the space at the beginning of each item in \startitemize[text] to be too large. Currently, this is hard coded to be \emwidth plus \intertwordstretch minus \interwordshrink (line 1132 of core-itm.tex with the comment "new per 2006/10/20"). I always end of copying the definition of complexdoitemgroupitem to my private modules and changing the emwidth in the definition to 0.5\emwidth. Can you please keep this key to be configurable with a key (textinbetween)? BTW, any particular reason not to simply say \removeunwantedspaces\space\ignorespaces instead of \removeunwantedspaces\hskip\emwidth\!!plus\interwordstretch\!!minus\interwordshrink\relax \stopitemgroup uses just the first variant. Thanks, Aditya

3 4

listings.sty
by Peter Münster 11 Jul '08

11 Jul '08

Hello, I suggested to the author of the very feature rich LaTeX-Listings package, Carsten Heinz, to port this package to ConTeXt, and it seems, that he is interested. But before doing it, there are some questions: * What do Hans and other people thing about that? * listings.sty uses keyval.sty, how is the proper ConTeXt-way to do the same things as keyval, or should listings stay with keyval? Greetings, Peter -- http://pmrb.free.fr/contact/ _____________________________________ FilmSearch engine: http://f-s.sf.net/

9 18

standardmakeup, frontmatter, bodymatter & page numbering
by Mojca Miklavec 02 Jun '08

02 Jun '08

Hello, I have a document consisting of title page, some introduction which should have pages numbered with roman numerals, and finally the real content \setuphead[subject][page=odd,style=\ss\bfb] \setuppagenumbering[location=] \starttext \startstandardmakeup title page \stopstandardmakeup \startfrontmatter \setuppagenumbering[conversion=romannumerals] \setupfootertexts[page \pagenumber{}] \subject{some intro pages} \input tufte \stopfrontmatter \startbodymatter \setupfootertexts[page \pagenumber{} of \totalnumberofpages] \dorecurse{10}{\subject{real content} \dorecurse{\recurselevel}{\input knuth} } \stopbodymatter \stoptext Now the problems: 1.) The second page starts counting at 1, while counting should start at page 3. This can be solved by using another \startstandardmakeup\strut\stopstandardmakeup. 2.) The last page says "page 26 of 27" - the total page number is indeed 27, but counting started on the second page, so it never reaches the last number. 3.) I would like the page number on the first page of bodymatter to be "page 1 of 23" instead of "page 4 of 27", and the last one to ge "page 23 of 23" instead of "page 26 of 27" There is some way=bychapter setting for page numering, but in that case there are no suitable chapters/sections available. Any hints appreciated ... Thanks a lot, Mojca

4 13

First document — problems with bib module and layout
by Matija Šuklje 06 Apr '08

06 Apr '08

Hullo, I'm just making my first real document in ConTeXt and although I'm thinking more and more how this was a great idea. I also decided to simultaneously write an external document/module containing all definitions to fit the But as a newbie, of course, I stumbled upon some beginner's problems: 1. Chapter heading is not like I would expect — I would like to have the line above the chapter as long as the one below it 2. The empty page at the end of the document annoys me and doesn't want to go away. 3. The citations won't show any content, neither does the list of publications — I'm clearly doing something very wrong here. What I want is numbered citation with short references at the bottom and full references in the list of publications in the appendices. 4. If I want to include 'pf_ul.tex' and 'moja_bibliografija.bbl' into my user's local modules in Linux, where should I place the link to them? It's a bit annoying to have to place links to them in each directory where I make a new new file that uses them. And clearly, there will be many yet to come! If anything I just wrote doesn't make much sense, I excuse myself ...I'm tired, tried to learn and hack together this definitions the whole day today and didn't sleep much yesterday either. Cheers, Matija -- gsm: +386 41 849 552 e-mail: matija.suklje(a)rutka.net www: http://matija.suklje.name aim: hookofsilver icq: 110183360 jabber/g-talk: matija.suklje(a)gabbler.org msn: matija.suklje(a)rutka.net yahoo: matija_suklje

3 11

Font question
by Marcin Borkowski 11 Mar '08

11 Mar '08

Hi all! I'm going to start using ConTeXt; I've been planning to do so for a few years, but now I finally have Internet access at home, so it's easier for me to look things up in the wiki (or ask here;)). I have two questions. The first one is connected with fonts. I can't understand ConTeXt's font mechanism, which seems way too complicated for me; could anyone just tell me how I can switch to, e.g., Antykwa Poltawskiego (I'm Polish, so I'd like to use it;)) or, say, Pagella? Of course, I'd also like to be able to typeset Polish texts with them; will \enableregime[utf-8] \mainlanguage[pl] be enough (apart, of course, from adapting ConTeXt to Polish typography customs, like dots after chapter numbers etc.)? I think that that's what the wiki lacks: a beginner's guide on _using_ fonts (not _installing_ them or _messing_;) with them). If someone enlightens me on this, I could write something on the wiki about it. And the second, a bit "philosophical" question: the official manual is not so new. How do I learn ConTeXt best? I mean, are changes to the user interface since 2001 so big that I could run into troubles using the manual? Or are there some changes which make something easier/possible which was difficult/impossible at the time or writing the manual - how do I learn about these? And last but not least - Hans, thanks for such a great TeX macro package! Yours -- Marcin Borkowski (http://mbork.faculty.fmcs.amu.edu.pl) It is impossible to split a cube into two cubes, a fourth power into two fourth powers and so on. I've found a remarkable proof of this fact, but unfortunately it's too long to fit into the signature.

7 18

hz and protrusion
by Hans Hagen 03 Mar '08

03 Mar '08

Hi, The latest luatex beta + mkiv support hz and protruding. The user interface will be extended a bit, but for the moment it goes as follows: % engine=luatex % \setupfontexpansion [quality][stretch=2.5,shrink=2.5,step=.5,factor=1] \setupfontexpansion[oeps][a=1,b=2] \setuptolerance[verytolerant,stretch] \showframe \starttext \definefontfeature[demo][default][mode=node,expansion=quality,protrusion=pure] \start \definedfont[Serif*demo at 12pt] \enableadjusting \enableprotruding \input tufte \par %\definedfont[name:optimanova*demo at 12pt] \enableadjusting \enableprotruding \input tufte \par \stop \stoptext (or the usual \setupalign options) As you may deduce from this example, handling is gone in mkiv. This not only safes some 40K format file, but the new mechanism also runs faster (some 10% overhead on 300 pages of pure text, which is rare). At some point we need to extend the hz/protruding vectors in mkiv to cover non latin scripts as well (currently they default to factors of 1). As with mkiv, latin glyphs fall back to their shape parent. Under some circumstances hz may not work as expected. Fixing this is on the agenda for the next luatex beta release. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

2 2

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

ntg-context February 2008