September 2020 - ntg-context - NTG Mailing Lists

serial letters
by Henning Hraban Ramm 11 Nov '24

11 Nov '24

How would you approach serial letters, e.g. to all members of a club? (Actually I need to send out donation receipts.) I’d like to use the letter module, since my usual letter design is using it. I can export the addresses to CSV, JSON, Lua tables or whatever or transfer them to a SQLite db. Would it make more sense to read them in Lua and combine this data with a buffer, or to write a single tex file for every letter? I know how to do the latter, but I’d like to learn a more ConTeXt-ish way. Would it make sense to use the bibliographies module? Greetlings, Hraban --- https://www.fiee.net http://wiki.contextgarden.net https://www.dreiviertelhaus.de GPG Key ID 1C9B22FD

7 9

t-downsample.lua
by Peter Münster 17 Oct '24

17 Oct '24

Hi, Please find attached a new version of the module, with some ideas from Marco. Later, I'll upload it to modules.contextgarden.net. Here a usage example: \usemodule[downsample] \setupexternalfigures[ location=default, % find hacker.jpg and mill.png cache=/tmp, % where to put the low resolution images resolution=50, % resolution in DPI conversion=downsample.pdf] % use this module \starttext \externalfigure[hacker][width=0.4\textwidth] \setupexternalfigures[resolution=20] \externalfigure[mill][width=4in, height=3in] \setupexternalfigures[resolution=200] \externalfigure[mill][width=4in, height=3in] \stoptext Hans, it would be nice, to apply this patch, to trigger new conversion, when figure dimensions change: --- grph-inc.lua~ 2019-02-14 17:04:12.000000000 +0100 +++ grph-inc.lua 2019-02-17 08:45:38.129971581 +0100 @@ -864,6 +864,14 @@ newbase = prefix .. newbase end local hash = "" + local width = figures.current().request.width + local height = figures.current().request.height + if width then + hash = hash .. "[w:" .. width .. "]" + end + if height then + hash = hash .. "[h:" .. height .. "]" + end if resolution then hash = hash .. "[r:" .. resolution .. "]" end TIA, -- Peter

2 5

\type ignores space between command and bracket
by Wolfgang Schuster 02 Feb '24

02 Feb '24

Hi, in the following code example the result from \type lacks the space between \cmd and the following left bracket. \starttext \starttyping \cmd [...] \stoptyping \type{\cmd [...]} \stoptext Wolfgang

3 2

Luatex 1.12.0 announcement.
by luigi scarso 27 May '23

27 May '23

============================================================== LuaTeX 1.12.0 2020-03-15 ============================================================== This is the release for TeX live 2020. --shell-restricted now forbids loading of dso (dll/so object) Scaled virtual font Aadditional primitives \eTeXglue[stretch|shrink]order for querying order the etex way. Extra features runtoks tex.getmodenames() (as these can differ per engine/version) Permit nested runtoks in more complex situations of nesting (HH) More accurate and correct test for tex.[set|get]math Minor clean-up and bugs fixed -- luigi

1 4

Laundry symbols (now: altered picture)
by Procházka Lukáš Ing. - Pontex s. r. o. 02 Jan '22

02 Jan '22

Hello ConTeXters, is there a way how to get laundry symbols into ConTeXt? - The image is copied from "The Comprehensive LATEX Symbol List", Scott Pakin. TIA. Best regards, Lukas -- Ing. Lukáš Procházka [mailto:LPr@pontex.cz] Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz] Bezová 1658 147 14 Praha 4 Tel: +420 244 062 238 Fax: +420 244 461 038

5 10

Unicode normalization and Hebrew in ConTeXt
by Joey McCollum 18 Aug '21

18 Aug '21

I am typesetting a document in Hebrew that includes pointing (e.g., vowels, shin and sin dots, dagesh, etc.) using ConTeXt. The Hebrew text that I want to typeset has been normalized into Unicode's NFC canonical form. It is well-known that the Unicode canonical ordering of Hebrew points conflicts with the recommended mark ordering of specific points based on their functions (see https://www.sbl-site.org/Fonts/SBLHebrewUserManual1.5x.pdf for more on this topic). Thankfully, many typesetting engines automatically reorder the points to ensure that they are combined according to the specifications of many fonts. I'm pretty sure that XeLaTeX is one of these, as it typesets Hebrew letters with multiple points correctly even when the Hebrew text is in NFC form. My question is, can ConTeXt with LuaTeX handle the same situation correctly? In the following minimal example, ConTeXt typesets pointed Hebrew correctly when the characters are in the typographically recommended order, but not when they are in Unicode canonical order: ``` %Setup Hebrew text font: \definefontfeature[f:pointedhebrew][default][ ccmp=yes, mark=yes, script=hebr ] \definefontfamily[hebrew] [rm] [SBL Hebrew] [features=f:pointedhebrew] %Set the body font: \setupbodyfont[hebrew] %Set up right-to-left alignment: \setupalign[r2l] \starttext %Characters after normalization, in Unicode canonical order (bet + segol + dagesh + final nun): בֶּן %A word with characters in typographically recommended order (bet + dagesh + segol + final nun): בֶּן \stoptext ``` I typeset this using ConTeXt version 2020.03.10, as released with TeXLive 2020. I got the SBL Hebrew font from https://www.sbl-site.org/educational/BiblicalFonts_SBLHebrew.aspx. According to the font's user manual (see the link above the MWE), the font should be able to combine the marks to form the correct glyph regardless of their order after the consonant, but that doesn't seem to be the case here. I also tried using the predefined "hebrew" featureset, but that did not change anything. Is there some other OpenType feature or featureset I need to enable to fix this, or is there some module or option I can include to get ConTeXt to typeset Unicode-normalized Hebrew as if it were ordered in the recommended way, like XeLaTeX does? I see that the uninormalize module is mentioned in the thread "XeLaTeX, LuaLaTeX, fontspec, unicode and normalization" on TeX Stack Exchange ( https://tex.stackexchange.com/questions/229044/xelatex-lualatex-fontspec-un…) can that be used with ConTeXt? Thank you, Joey

2 10

img.scan in lmtx?
by Henning Hraban Ramm 05 Aug '21

05 Aug '21

Hi, I use the lua function img.scan{filename}, but in lmtx I get "attempt to index a nil value (global 'img')", so I guess this got renamed or moved? HR

2 6

LMTX: different output if dots are used in the file name
by Marco Patzer 09 Jul '21

09 Jul '21

Hi! LMTX and MkIV behave differently if dots are used in the file name. Example: printf '%s\n' '\starttext\null\stoptext' > foo.10.tex && context foo.10.tex MkIV: → foo.10.pdf LMTX: → foo.pdf Is this intentional? This is LuaMetaTeX, Version 2.06.05 current version: 2020.05.25 23:39 Marco

5 17

Re: [NTG-context] Installing VSCode extension?
by Jeong Dal 17 Dec '20

17 Dec '20

Dear Alasdair McAndrew, I am using vscode in iMac, so my setting may not work for you. 1. First, find files for vscode in your TeX folder. In my case, /ConTeXt-homefolder/tex/texmf-context/context/data/vacode/extensions/context/*.* 2. In a homefolder, there is a hidden folder “.vacode”. Copy context/*.* to ./vscode/extensions/context/*.* 3. Open vscode and enable context-extension. Since it was long time ago, my memory may not be correct. However, I hope that it may give you an idea. Best wishes, Dalyoung

4 6

Re: [NTG-context] Installing VSCode extension?
by Jeong Dal 02 Dec '20

02 Dec '20

Dear Mikael, > 2) Is there a nice way to compile the tex file from > within vs code? As of > now, I opened a terminal and compiled from that, but that feels like the > wrong way of doing it. For the first question, I don’t know either. For the second question, I’d like to explain what I did for compiling TeX file in vscode. Since I use vscode in MacOsX, you may find your way in Linux. There is a tasks.json file in .vscode folder. I added the following script in the “tasks":[ ] and save it. (You have to modify the "texmf-osx-64/bin” path in the following script from your machine. { "label": "ConTeXt LuaMetaTeX", "type": "shell", "command": "export PATH=/Users/graph/ConTeXtLM/tex/texmf-osx-64/bin:$PATH;mtxrun --autogenerate --script context --autopdf --purge '${file}'", "args": [], "options": { "cwd": "${fileDirname}" }, "group": { "kind": "build", "isDefault": true } }, When you want to compile a ConTeXt file, find “terminal > Run Build task” in the menu, then “ConTeXt LuaMetaTex” will pop up. Or just use the key “command-shift-B” instead using menu item. I hope that it may help. Best wishes, Dalyoung

3 2