ntg-context November 2023

ntg-context@ntg.nl

40 participants
53 discussions

\type ignores space between command and bracket
by Wolfgang Schuster 02 Feb '24

02 Feb '24

Hi, in the following code example the result from \type lacks the space between \cmd and the following left bracket. \starttext \starttyping \cmd [...] \stoptyping \type{\cmd [...]} \stoptext Wolfgang

3 2

textbackground spacing offset
by Marco Patzer 31 Jan '24

31 Jan '24

Hi! I'm having problems getting the textbackground spacing offset to work. Example: \setupframedtext [offset=overlay, width=max, depthcorrection=off] \setuptextbackground [location=paragraph, %% offset=overlay, %% does nothing %% backgroundoffset=overlay, %% does nothing %% depthcorrection=off, %% does nothing %% topoffset=3mm, %% works, but only for positive values background=, frame=on] \starttext \startframedtext \framed{Foo} \stopframedtext \starttextbackground \framed{Foo} \stoptextbackground \stoptext How do it get the same spacing as in the framedtext case? The textbackground has a small gap between the inner and outer frame at the top and a larger gab at the bottom. I'm not concerned with horizontal spacing here. Marco LMTX 2023.09.04 19:15

2 3

Fwd: Re: x mark symbol and general symbol guide
by Gerion Entrup 18 Jan '24

18 Jan '24

Hans already answered my question. Thank you! Gerion ---------- Forwarded Message ---------- Subject: Re: [NTG-context] x mark symbol and general symbol guide Date: Freitag, 13. Oktober 2023, 18:13:42 CEST From: Hans Hagen <j.hagen@...> To: Gerion Entrup <gerion.entrup@...> On 10/13/2023 2:33 PM, Gerion Entrup wrote: > Hi, > > I recently tried to typeset a table with checkmarks and x marks. > \checkmark exists but is there a predefined x mark symbol (\xmark does > not work)? > > In general: For LaTeX there exists the very helpful comprehensive LaTeX symbol list [1]. > Is there a similar documentation for ConTeXt somewhere? \usesymbols[fontawesome] \startTEXpage[offset=1ts] \symbol[fontawesome-solid][times]\quad \symbol[fontawesome-solid][check] \stopTEXpage you can run symb-imp-fontawesome and get a list Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- -------------------------------------------------------------

3 6

Status of Asymptote
by Alexandre Christe 10 Jan '24

10 Jan '24

Dear all, I'd like to know what is the status of Asymptote in Context. To my knowledge, metapost/metafun only support 2D (except with the additional libraries from Roegel, which would have to be cleaned up a bit). Otherwise, what shall be used for 3D drawings in Context? TikZ? Something else? Thanks in advance. Alex

10 11

multipage metapost output from ConTeXt
by Emanuel Han 06 Jan '24

06 Jan '24

How can I achieve multipage metapost output from ConTeXt? The result should be a multipage pdf. It contains just a metapost graphic per page. The graphic has always the same bounding box and evolves from page to page: Some elements to be drawn are added, and some others would ideally also be removed, while keeping elements which has already been drawn on previous pages. I can manage when it is not possible to remove elements (in that case I'll just cover them with a covering element). I saw that it is possible to achieve my goal with standalone metapost, as described here: https://tex.stackexchange.com/questions/471662/mptopdf-is-multipage-output-… But I'll need to achieve this with Metapost inside ConTeXt because I use labels in Metapost which print text in Japanese, Korean , Arabic and Roman script: Thanks to ConTeXt, I can define appropriate fonts for each script. All this works already in my working example. The only unsolved problem is to ship out multiple pages. For the minimal working example, I didn't remove the font defining part, because having 4 different fonts is a condition of my use case. The graphic on the other hand is some simple dummy nonsense graphic not from my project. The graphic is in the provided example drawn as a summing up of layered drawing steps (6 steps, to be precise), so no removing is implemented here (because I don't know how that would be done). If each of the figures 1 to 6 of my mwe can be put alone on a page, I'd be already very happy. Now, they're put on top of each other all on the same single page, also on top of figure 0. The desired multipage pdf will be used in presentation mode of a pdf viewer and skipped forward and backward from page to page (that is from drawing step to drawing step). mwe: \enableregime[utf] % enable unicoded input \definefontfamily [RomanFont] [rm] [calluna] \definefontfamily [KoreanFont] [rm] [applemyungjo] \definefontfamily [JapaneseFont] [rm] [hannotatesc] \definefontfeature [fea] [mode=node,language=dflt,script=arab, init=yes, medi=yes, fina=yes, isol=yes, calt=yes, rlig=yes, tlig=yes, trep=yes, curs=yes, kern=yes, mark=yes ] \starttypescript [serif] [notonaskharabic] \definefontsynonym [notonaskharabic-Light] [name:notonaskharabic] [features=fea] \definefontsynonym [notonaskharabic-Bold] [name:notonaskharabic] [features=fea] \definefontsynonym [notonaskharabic-Italic] [name:notonaskharabic] [features=fea] \definefontsynonym [notonaskharabic-Bold-Italic] [name:notonaskharabic] [features=fea] \stoptypescript \starttypescript [serif] [notonaskharabic] \usetypescript[serif][fallback] \definefontsynonym [Serif] [notonaskharabic-Light] [features=fea] \definefontsynonym [SerifItalic] [notonaskharabic-Italic] [features=fea] \definefontsynonym [SerifBold] [notonaskharabic-Bold] [features=fea] \definefontsynonym [SerifBoldItalic] [notonaskharabic-Bold-Italic] [features=fea] \stoptypescript \starttypescript [notonaskharabic] \definetypeface [notonaskharabic] [rm] [serif] [notonaskharabic] [default] \stoptypescript \usetypescript[notonaskharabic] \setupbodyfont [RomanFont] \starttext \startMPcode picture p[]; path bb; %bounding box z0 = (0,0); z1 = (60,40); z2 = (40,90); z3 = (10,70); z4 = (30,50); z5 = (90,70); z6 = (-10,70); path A; A = z0..z1..z2..z3..z4 ; pair AStartPoint; AStartPoint = point 0 of A; pair AEndPoint; AEndPoint = point 4 of A; path B; B = z5..z6; pair BStartPoint; BStartPoint = point 0 of B; pair BEndPoint; BEndPoint = point 1 of B; path C; C = AStartPoint..AEndPoint; % drawing steps: p1:=image( draw A withcolor red; ); p2:=image( label(textext("\JapaneseFont 日本語"), AEndPoint); ); p3:=image( label(textext("\notonaskharabic \textdir TRT دانگ") scaled 1.2, AStartPoint); ); p4:=image( label(textext("\KoreanFont 한국어"), BStartPoint); ); p5:=image( label(textext("\RomanFont bāng"), BEndPoint); draw C withcolor green; ); p6:=image( draw B withcolor blue; ); beginfig(0); %% the whole picture for the common bbox for k=1 upto 6: draw p[k]; endfor bb:=bbox(currentpicture); endfig; for $=1 upto 6: beginfig($); for k=1 upto $: draw p[k]; endfor setbounds currentpicture to bb; endfig; endfor \stopMPcode \stoptext

5 11

usage of conversion in \date
by Peter Münster 18 Dec '23

18 Dec '23

Hi, When printing a date in French, I would like to convert the "1" to "1\ier", but it does not work as I expect: --8<---------------cut here---------------start------------->8--- \startluacode -- from https://wiki.contextgarden.net/Command/defineconversion: interfaces.implement { name = "FRdate", public = true, arguments = "string", actions = function(s) local n = tonumber(s) if n == 1 then context"1\\ier" else context(s) end end } \stopluacode \def\ier{\highordinalstr{er}} \mainlanguage[fr] \defineconversion[frd][\FRdate] \setuplanguage[fr][date={day:frd,\ ,month,\ ,year}] \starttext Conversion: \convertnumber{frd}{1}, \convertnumber{frd}{2} (OK)\\ Dates: \date[d=1], \date[d=2] (not OK) \stoptext --8<---------------cut here---------------end--------------->8--- How could I get "1\ier\ novembre 2023" please? TIA for any help, -- Peter

2 3

ConTeXt support for Nova text editor (MacOS)
by Paul Mazaitis 08 Dec '23

08 Dec '23

Hello, list! I'm working on a ConTeXt language extension for the Nova editor by Panic software (https://nova.app/). The extension is here: https://github.com/pmazaitis/nova-context/releases/tag/0.6.0 ...currently in beta, but fairly functional. This version of the extension supports: * Syntax Highlighting * Folding for (most) environments * Navigating by Symbols (headings: chapter, section, etc.) * Spell-checking of body text and section titles * Managing builds with Nova's tasks system (As an aside, this extension uses an updated version of the ConTeXt tree-sitter parser [https://github.com/pmazaitis/tree-sitter-context] that can now recognize (most) environments and use them to parse out the document hierarchy.) Limitations at the moment: not all environments are supported (only those with \start and \stop commands right now), and the extension only supports English. Happy for any bug reports, etc., -Paul

5 6

(again) wrong destination types?
by Pablo Rodriguez 06 Dec '23

06 Dec '23

Dear list, sorry for insisting, but this is important for my documents. I have the following sample: \setupinteraction[state=start, page=name, focus=standard] \starttext a\footnote{b} \stoptext If page is set to anything different than no in \setupinteractionscreen, focus=standard will not work (it will be used as focus=fit). Could anyone confirm the issue or explain me what I’m doing wrong? Many thanks for your help Pablo

2 4

Re: externalfigure crashed
by Wolfgang Schuster 06 Dec '23

06 Dec '23

Hans van der Meer schrieb am 22.11.2023 um 21:22: > The problem persists. Here the new logfile. 1. What is the version of your Luametatex binary? luametatex --version This is LuaMetaTeX, Version 2.10.11 2. What do you get in your log-file with the following example! \starttext \show\expandeddetokenize \stoptext On my system I can find the following line: > \expandeddetokenize=primitive \expandeddetokenize Wolfgang

7 9

marginwidths
by Hans van der Meer 03 Dec '23

03 Dec '23

I would like to change the width of the margins on the page. In the MWE here, the pagelayout does not seem to obey the \setuplayout command. Why are the margins shown uneffected by \setuplayout? yours sincerely dr. Hans van der Meer

4 5

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

ntg-context November 2023