- ntg-context - Mailing Lists

Strange behaviour of itemize inside tabulate
by Willi Egger 21 Nov '16

21 Nov '16

Hello, I have the following minimal example % \setupitemgroup % [itemize] % [each] % [autointro,packed] % [symbol=2] \starttext \starttabulate[|l|p|] \NC \bf Druk procedé \NC \bf Opmerking \NC\NR \NC Offset \NC \strut weinig problemen als onverpakt\crlf \NC\NR \NC Digitaal \NC beduidend lager i.v.m. warmte fixatie. \startitemize \startitem zo snel mogelijk weer verpakken na het printen. \stopitem \stopitemize\par \NC\NR \stoptabulate \stoptext When not uncommenting the setupitemgroup the tabulate appears as expected. However with the setupitemgroup enabled the row containing the itemize is shifted up and overlays the first row… Do I miss something? Thank you for looking at this. Kind regards Willi

2 2

Problem with setuptagging and ebgaramond font
by Rik Kabel 21 Nov '16

21 Nov '16

This was submitted over a year ago, but probably got lost in the run-up to the 2015 annual meeting. It is still a problem with ConTeXt ver: 2016.11.18 22:20 MKIV beta fmt: 2016.11.19 int: english/english luajittex, 1.0.1. I am happy to provide a pdf and log file, or other traces, if that helps. %% When tagging state=start and the font is ebgaramond, %% no hyphens are printed at word breaks. %% %% When tagging state=start and the font is libertine, %% or any font other than ebgaramond that I have tried, %% hyphens are printed at word breaks. %% %% When tagging is not started and the font is ebgaramond, %% hyphens _are_ printed at word breaks. %% \setuptagging[state=start]% remove this line for comparison \setupbodyfont[ebgaramond]% \setupbodyfont[libertine] \starttext \hsize7cm \input zapf \par \input zapf \par \input zapf \par \input zapf \par \input zapf \par \input zapf \par \stoptext Bug, or error on my part? -- Rik

3 9

issue with lpath containing a hyphen
by Pablo Rodriguez 21 Nov '16

21 Nov '16

Hans, I have the following sample: \startbuffer[demo] <doc> <div id="a-b"> is it working </div> </doc> \stopbuffer \startxmlsetups xml:initialize \xmlsetsetup{#1}{doc}{xml:*} \xmlsetsetup{#1} {div[@id='a\letterpercent-b']} {xml:a:b} \stopxmlsetups \xmlregistersetup{xml:initialize} \startxmlsetups xml:doc \xmlflush{#1} \stopxmlsetups \startxmlsetups xml:a:b \input knuth \stopxmlsetups \starttext \xmlprocessbuffer{main}{demo}{} \stoptext The only way to get the Knuth in the quote is to remove "\letterpercent" in the lpath. I guess I must be doing something wrong in this sample. In my real document, I cannot simply remove it, I get an error. As a general consideration, houw about making not mandatory to escape characters in lpaths? This would ease the traslation from XML code to lpaths. Many thanks for your help, Pablo -- http://www.ousia.tk

2 3

space before and after an xtable
by Pablo Rodriguez 20 Nov '16

20 Nov '16

Dear list, I have the following sample: \setupxtable[option={stretch}] \setupxtable[beforeafter] [before={\blank[big]}, after={\blank[big]}] \starttext \dorecurse{5}{\startembeddedxtable[beforeafter] \startxrow \startxcell first\stopxcell \startxcell second\stopxcell \stopxrow \stopembeddedxtable} \dorecurse{5}{\blank[big]\startembeddedxtable \startxrow \startxcell third\stopxcell \startxcell fourth\stopxcell \stopxrow \stopembeddedxtable\blank[big]} \stoptext Since before and after don’t seem to be available for \setupxtable, is there a way to add a dimension before and after the xtable using \setupxtable? Many thanks for your help, Pablo -- http://www.ousia.tk

1 0

hsize changes unexpectedly
by Rik Kabel 20 Nov '16

20 Nov '16

Why does \hsize revert to \textwidth after a page and a paragraph? \starttext \hsize200pt \dorecurse{60}{\recurselevel: \the\hsize\ \the\textwidth\par} \stoptext -- Rik

4 6

ownnumber in \starttitle etc
by Jan U. Hasecke 20 Nov '16

20 Nov '16

Hi all, \showsetup{\starttitle} shows the option 'ownnumber" with a TEXT-value. I don't know what this option is good for. juh

3 6

Strange spurious character
by Otared Kavian 20 Nov '16

20 Nov '16

Hi Hans, After having updated my installation of ConTeXt, I noticed the presence of a spurious « ß » character at the top of every document, or sometimes in the footer, or in the header. Also in the example below the text is typeset with bold italic, even though there is no request for it. Here is a minimal example: %%%% begin bug-beta.tex \definefallbackfamily[mainface][serif][palatino] \definefontfamily[mainface][sans][palatino] \setupbodyfont[mainface] \starttext Why is there a « ß » LATIN SMALL LETTER SHARP S above? Why is the text in bold italic? \stoptext %%%% end bug-beta.tex Best regards: OK

3 7

Re: [NTG-context] Nested modes and itemizations
by Christoph Reller 18 Nov '16

18 Nov '16

On Thu, Nov 17, 2016 at 13:14:49 +0100 Hans Hagen <pragma(a)wxs.nl> wrote: > > On 11/17/2016 11:21 AM, Christoph Reller wrote: > > Hi, > > > > I have the following minimal not-working example: > > > > \starttext > > \startitemize > > \item One > > \startmode[modeA] > > \item Two > > \startitemize > > \startmode[modeB] % <- this > > \item Two A % <- does > > \stopmode % <- not work > > % \doifmode{modeB}{\item Two A} % <- this works > > \item Two B > > \stopitemize > > \stopmode > > \stopitemize > > \stoptext > > > > Note that both modeA and modeB are not defined and hence not enabled. > > When compiled with the latest version of ConTeXt MkIV, I get: Missing > > number, treated as zero. > > However, If I use the inline version \doifmode instead of the > > environment version \startmode \stopmode, then the example compiles > > without problem. > > > > I am afraid but this may be a bug. > > No, just the way tex parses, \stopmode is a delimiter so the inner > \stopmode ends the outer \startmode. > > Using the \doif variable doesn't have that problem. > > Oh, of course! Thank you and sorry for the noise. Christoph

1 0

bug in \directsetup?
by Pablo Rodriguez 18 Nov '16

18 Nov '16

Dear list, I have the following sample: \setuppapersize[A6] \setupinteraction[state=start, focus=standard] \placebookmarks[chapter, section][chapter, section] \startsetups[placesect] \start \setupinterlinespace [line=2.8ex] \placelist [section] [alternative=d, numbersegments=section, pagenumber=no, style=\itx] \par \stop \stopsetups \setuplist [chapter] [before={\blank[medium]}, after=\directsetup{placesect}] \starttext \placelist[chapter] \dorecurse{5}{\chapter{Knuth}\input knuth \dorecurse{8}{\section{Zapf}\input zapf}} \stoptext I need the \directsetup to be able to set up a different interline space in the section list from TOC. I’m using latest beta from 2016.11.17 14:19. There is a weird behaviour: the links from TOC for the first sections reach the chapter title an not the section title. All other sections have their right destinations from the table of contents. And bookmarks for first sections have also the right destinations. Of course, this would work as expected, if I avoided the \directsetup (having a wrong interline space). If this isn’t a bug, what am I missing? Many thanks for your help, Pablo -- http://www.ousia.tk

2 2

Extract only certain part of document (via modes)?
by Mikael P. Sundqvist 17 Nov '16

17 Nov '16

Dear list, and in particular Hans, I asked the same question on stackexchange before today (http://tex.stackexchange.com/q/337738/52406) and got the answer that what I want to do might not be possible. In my large document I have exercises (typeset with \startexercise \stopexercise, defined as an enumeration). Is it possible to use modes (or any other trick) to be able to compile the same file and get only the exercises. For example, context file.tex should give the full document, while context --mode=exercises file.tex should give only all the exercises (or just everything "in one mode")? /Mikael

4 7