- ntg-context - NTG Mailing Lists

Problems with pagenumbering using frontpart/bodyart/...
by Holger Schöner 08 Jan '04

08 Jan '04

Hi, I think that I either found a bug, or am using some commands in an invalid way. What do you think about the following code: \setuplayout[location=duplex] \setuppagenumbering[alternative=doublesided] \setuppagenumbering[way=bytext,partnumber=no] \startsectionblockenvironment[frontpart] \setuppagenumbering[conversion=romannumerals,left={--~},right={~--}] \stopsectionblockenvironment \startsectionblockenvironment[bodypart] % \setuppagenumber[number=1] % *1 \setuppagenumber[number=0] % *2 \stopsectionblockenvironment \setupsectionblock[frontpart][page=no] % *2 \setupsectionblock[bodypart][page=no] % *2 \setupsectionblock[appendixpart][page=no] % *2 \setuphead[part][placehead=yes,alternative=middle,number=no,ownnumber=no,resetnumber=no] \definepagebreak [chapter] [yes,header,footer,right] \setuphead [part,chapter,title] [page=chapter] \starttext \startfrontmatter \title{abstract} \completecontent \page[yes,header,footer,left] % *2 \stopfrontmatter \startbodymatter \chapter{Introduction} \chapter{Algorithms} \chapter{Discussion} \stopbodymatter \startappendices \chapter{Appendices} \stopappendices \stoptext I want to exclude only unmarked lines and those have a "*1" in their comment, but not the lines marked with "*2" at the end. Unfortunately then the empty page between the contents and the chapter introduction is not (as intended) completely emtpy, but has a page number: "-iv-". To avoid this I am using (following a tip posted here some months ago, I think) the lines \setupsectionblock[frontpart][page=no] \setupsectionblock[bodypart][page=no] \setupsectionblock[appendixpart][page=no] Unfortunately, now (and this, I think, is the bug) the last chapter or title before the end of the frontmatter (in this case the table of contents) does no longer receive roman page numbers, but already the normal ones (and page numbering also starts at this chapter, not with the "Introduction"). To compensate for this I am currently using a workaround (all the lines marked with "*2" instead the one marked with "*1"), basically avoiding the described effect by forcing a page break (found using trial and error such that it works regardless of the length of the table of contents). Can I somehow get rid of these workarounds, without the otherwise empty pages being numbered? Unfortunately, pages 6, 8, 9 still are numbered, although otherwise empty (and the last two are unnecessary anyway), but I guess the problem is the same as for the pages between frontmatter and bodypart. (Probably fiddling with the backmatter and using some forced page breaks could solve those as well.) I am using: ConTeXt ver: 2003.10.5 fmt: 2003.10.19 int: english mes: english -- Holger F. Schoener TU Berlin; Dept. IV: EE and Computer Science hfsch(a)cs.tu-berlin.de http://www.cs.tu-berlin.de/~hfsch/ Rooms FR2525 Tel: +49-30-314-73115, Fax: -73121 Office FR 2-1 Franklinstr. 28/29, D-10587 Berlin, Germany

1 0

educational quiz check-in boxes
by olivier Turlier 08 Jan '04

08 Jan '04

Hi ConTeXers, Does anybody can show me a minimal but complete example of a quiz, using java, since I feel too old (big/wrong excuse!) for trying to understand javascript. My aim is to introduce a short auto-evaluation test after a theorical course + examples, in an interactive form (no server side storage of the results), in the way of acrotex package. I will share it (in french!), once working, on the the ConTeX ploned site. Thanks a lot. olivier Turlier

1 0

how to produce an irregular typesetting area
by Ole Schoening 08 Jan '04

08 Jan '04

Hallo all, I'm trying to produce an irregular (more than 4 corners) typesetting (main text) area of the following shape: ... (header) .... _____________________________________ ( logo / | ... text area ... | overlay background) | | ________________________| | | | ... ... | | | | | ________________________| | |(logo | | /overlay background) | ... text area ... | |___________________________________| The reason of this wish is not to overwrite the displayed logos or overlay pictures, which are used to form a common layout for a brochure. Btw., the orientation of the logos / pictures changes from even to odd pages. The measures of the logos / pictures prohibit a solution just by putting them in the header or footer. Does anyone have an idea how to solve this problem? Thanks in advance, Ole P.S.: Thanks a lot for this great software !

1 0

ConTeXt at San Francisco conference?
by karl＠freefriends.org 05 Jan '04

05 Jan '04

Dear ConTeXt folks, The TeX Users Group is sponsoring a user-oriented regional conference on the practical uses of TeX, July 19-22, 2004 in San Francisco. For the sake of publicity and announcements, we were wondering if there is sufficient interest in ConTeXt to list it as a conference topic. The primary topics of the conference will be LaTeX and AMS-LaTeX. However, we do want to include other TeX documentation systems, so that TeX users will be aware of and know how to use other tools. In previous TUG conferences Hans Hagen has held workshops on ConTeXt, which have been well-received. Some preliminary information is available at http://tug.org/practicaltex2004. We would like to hear from anyone who would like to attend, as either a speaker or delegate. Please reply to conferences(a)tug.org if you are interested. Thanks! Karl Berry (current TUG president, in this, um, context :)

1 0

texexec --arrange and texexec --noarrange
by Willi Egger 05 Jan '04

05 Jan '04

Hi Contexters, Recently I tried to arrange pages of a document with texexec --arrange jobname In my environment file I setup the following: \setuppapersize[A5,portrait][A4,landscape] \setuppagenumbering[alternative=doublesided,location={footer}] % Arranging: \setuparranging[2UP] Of course I can comment the line of the arranging and just uncomment it for a single run hereafter to produce a PDF-file with arranged pages. When using texexec --arrange this should happen automatically. I realize, that the system is halted after systems: end file jobname at line 47 textblocks: writing textblocks to jobname.tub It looks like texexec is waiting for an input.... An identical situation occurs when issueing texexec --noarrange jobname Am I doing something wrong or is there a bug in texexec? Kind regards Willi texexec --noarrange

2 2

Classroom templates?
by Tyler Eaves 05 Jan '04

05 Jan '04

Does anyone have any templates useful for typesetting class notes or homework (For tuning in, not handing out). I'm a Comp Sci student, and last semester I used LaTeX for this with a couple of templates I found. Wondering if anyone had anything similar for ConTeXt. I'd be happy to share the LaTeX files if anyone's interested.

3 3

page arrangement
by Vit Zyka 05 Jan '04

05 Jan '04

Hallo ConTeXt list members, I'd like to arrange A5 landscape pages to A4 in this order ------- ------- ------- ------- ------- ------- | 1 | | 2 | | 5 | | 6 | | 9 | | 10 | ------- ------- ------- ------- ------- ------- | 3 | | 4 | | 7 | | 8 | | 11 | | 12 | ------- ------- ------- ------- ------- ------- for doublesided printing. I'd tried to set \setuparranging[2DOWN] or \setuparranging[2TOP] but it is not desired arrangement. I also experimented with \pusharrangedpage... \poparrangedpages... \handlearrangedpage... macros but I wasn't succsessful. Please, can somebody help me? Send answer also to my private address vit.zyka(a)seznam.cz since my dial up connection due to long time traveling does not enable to be member of the lively conference. Thanks, Vit Zyka

2 4

Text Editor for ConTeXt
by Gary Hoffman 05 Jan '04

05 Jan '04

I am looking for a text editor for use with ConTeXt that is comparable with those available for Latex (e.g. Kile (http://kile.sourceforge.net/) and TeXnicCenter(http://www.texniccenter.org/front_content.php)) The archives refer to ConTEXT, SciTE and Emacs. Only Emacs with the context.el plug-in appears to compare with Latex editors. However, context.el conflicts with my installation of Emacs (which includes the Auctex package) and will not load. Are there any other editors that are recommended? Any other suggestions? Thank you. Gary Hoffman -- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/

2 1

Perl scripts almost unusable under Win32 MiKTeX
by Giuseppe Bilotta 04 Jan '04

04 Jan '04

Recent ConTeXt updates have rendered some Perl scripts (texshow.pl & modules) unusable under MiKTeX because they heavily rely on web2c methods to find binaries and complementary files. -- Giuseppe "Oblomov" Bilotta

3 4

m-BibTeX problems
by Tobias Burnus 04 Jan '04

04 Jan '04

Hi, I have some strange bibTeX problems. a) I try to show DOI references in the publication list, therefore I created the macro \gotoDOI{} and modified \setuppublicationlayout[article]. As long as I don't use \setupinteraction[state=start], the DOI is hyphenated. Using \setupinteraction[state=start], the DOI is no longer hyphenated. Calling \gotoDOI directly, works (both cases), but with interaction enabled the DOI is printed in bold and with wide spacing after the possible line break points ("10. 1103" instead of "10.1103"). See attached files. Run them (with m-bib installed) as: texexec --once --pdf test; bibtex test; texexec --pdf test b) I'd like to see that I can click on the number in [4] and jump to the entry in the publicationlist: It is much more fun to read an article, thesis, etc. when one can click on the reference instead of searching for the reference list (going back is less important; after all, 'Go to previous view' exists). c) Someone should write a texutil plugin which automatically runs bibtex if necessary. I tend to forget this. (I will look into this as soon as I have time, i.e. probably in March.) Tobias

2 1