- ntg-context - Mailing Lists

ConTeXt 2007.01.02
by Taco Hoekwater 07 Jan '07

07 Jan '07

Hi all, Not even 40 hours into the new year, there is already a new ConTeXt release available for download from htp://www.pragma-ade.com . Bugfixes: * re-enable norwegian hyphenation patterns * footnote referencing fix * fix use of prime and underscore in math displays (that was already in 2006.12.27) New feature: * Use the low-level support for ToUnicode mapping in the (likewise brand new) pdftex 1.40, if possible. Wishing everybody all the best and lots of fun in 2007, Taco

3 7

Image logo showing up with white background
by Fidel Viegas 07 Jan '07

07 Jan '07

Hello folks, I am using an image to embed the logo at the top of the document. The background of my document is gray, and when I render the document, the logo shows up with a white background, over the gray background. Something similar to the \frame command. My logo image was converted from PSD (Photoshop PSD) to PDF, and I have preserved the tranparent background so that I could layer it over a background and it picks the background color instead of the white background. How do I embed my image in the document so that the background stays the background color of the document? What am I doing wrong? \def\FuxionLogo% {\externalfigure[FT_LogoV2][height=1.5\headerheight]} \definelogo [fuxion logo] [top] [middle] [command=\FuxionLogo,state=start] \setuppapersize[A4][A4] \setuppagenumbering [location={bottom,middle}] \setupcolors [state=start] \definehead[title][title] \setuphead [title] [textstyle=cap, before=\hairline, after=\hairline] \setupinterlinespace [big] \setuplayout [width=middle, height=middle] \starttext \setupbackgrounds [page] [background=color, backgroundcolor=gray] Another question I have is regarding the positioning of the logo. The logo is really close to the top. I want it to have a space at the top. How do I achieve this? Thanks in advance, Fidel.

2 1

wiki: linux installation updates
by Sanjoy Mahajan 07 Jan '07

07 Jan '07

I updated the Linux installation pages on the wiki, mostly the Debian one, but also the tetex 3.0 page and I added a short entry for Ubuntu 6.10 (edgy). The Debian page now describes how to install using Norbert's context packages. It describes a system-wide install based on those and the texlive packages. Let me know if you find errors or problems (or just correct the errors on the page). Sorry about the nightmare per-user install instructions I put there before. -Sanjoy `A nation of slaves is always prepared to applaud the clemency of their master who, in the abuse of absolute power, does not proceed to the last extremes of injustice and oppression.' (Gibbon)

2 4

\externalcommand?
by cormullion＠mac.com 06 Jan '07

06 Jan '07

I think there's something in ConTeXt called \externalcommand. Can this be used to hand over a section of source text for processing by an external program during the ConTeXt-ing of a document? How does it work, exactly? thanks again for help...

3 5

Using vim's syntax highlighting in (TeX) publicaions (fwd)
by Aditya Mahajan 06 Jan '07

06 Jan '07

Hi, I forgot to announce the t-vim module here. So here is a copy of Mojca's announcement on the vim mailing list. Aditya From: Mojca Miklavec <mojca.miklavec.lists(a)gmail.com> Date: Thu, 4 Jan 2007 07:53:07 +0100 Subject: using vim's syntax highlighting in (TeX) publications Hello, just in case anyone is interested in typesetting publications using vim's syntax highlighter. This is a new module written in ConTeXt (a flavour of TeX) that can be used in documents: http://modules.contextgarden.net/t-vim The idea was "stolen" from 2html.vim (which converts any syntax to html): this one converts any syntax to something "TeX"-friendly; typesetting itself is done by TeX then. Mojca

4 6

HZ with latest ConTeXt
by Peter Münster 06 Jan '07

06 Jan '07

Hello, I've just seen the page about hanging and hz on the wiki, so I've tried the example for lm: \starttext \input tufte \page \usetypescript[serif,sans,mono][hanging][normal] \setupalign[hanging] \usetypescript[modern-base][\defaultencoding] \setupbodyfont[reset] \setupbodyfont[modern] \input tufte \page \usetypescript[serif,sans,mono][hz][highquality] \setupalign[hanging,hz] %\usetypescript[modern-base][\defaultencoding] %\setupbodyfont[reset] %\setupbodyfont[modern] \input tufte \stoptext I can get hanging but no hz (no difference between 2nd and 3rd page). What is needed to get hz? Cheers, Peter -- http://pmrb.free.fr/contact/

4 3

dvipos outputs scaled points, which confuses context
by Sanjoy Mahajan 06 Jan '07

06 Jan '07

To stress-test things and because xdvi renders crisper text than any pdf viewer, I just tried 'texexec --dvi --nobackend notes'. It failed with: (/usr/share/texmf/tex/context/base/sort-lan.tex) (./notes.tuo ! Illegal unit of measure (pt inserted). <to be read again> - \pospxywhd ...fnum \positionanchormode =\plusone - \MPx \pageanchor \fi ... l.193 ...952663}{8880535}{334}{6216377}{134561832} The offending line in notes.tuo is: \pospxywhd{text:33}{33}{10952663}{8880535}{334}{6216377}{134561832} texexec works fine in PDF mode, where that line in the notes.tuo file is \pospxywhd{text:33}{33}{167.12437pt}{135.50621pt}{334.24875pt}{523.95755pt}{0.0pt} And 167.12437pt = 10952663sp. So dvipos (Version 20030628 (KPATHSEA)) is outputting the locations in scaled points (sp), but the results are being interpreted as printers points (pt), whereupon the dimension is absurdly large. [CtxTools | context version: 2007.01.02 13:44] -Sanjoy `A nation of slaves is always prepared to applaud the clemency of their master who, in the abuse of absolute power, does not proceed to the last extremes of injustice and oppression.' (Gibbon)

1 0

another problem with \starttables
by Peter Münster 05 Jan '07

05 Jan '07

Hello, shouldn't there be a line on the top of each page: \starttext \starttablehead \HL \stoptablehead \starttables[|l|] \NC test \NC\FR \dorecurse{100}{\NC test \NC\MR} \NC test \NC\LR \stoptables \stoptext ? Cheers, Peter -- http://pmrb.free.fr/contact/

1 0

error with metafun
by Peter Münster 05 Jan '07

05 Jan '07

Hello, with the latest ConTeXt on TeX-live 2007 and this input file: \starttext \startuseMPgraphic{test} draw fullcircle scaled 4cm withpen pencircle scaled 1cm ; setbounds currentpicture to boundingbox fullcircle scaled 4cm ; \stopuseMPgraphic \useMPgraphic{test} \stoptext I get the following error in dvi-mode: This is MetaPost, Version 0.993 (Web2C 7.5.6) (test-mpgraph.mp [1] metafun 2007-1-4 11:2 ) 1 output file written: test-mpgraph.1 Transcript written on test-mpgraph.log. [MP as EPS ./test-mpgraph.1] [MP color conversion ./test-mpgraph.1 ! Argument of \dodohandleMPcolor has an extra }. <inserted text> \par <to be read again> } \includeMPasEPS ...\the \!!heightb }\doinsertfile }\wd \scratchbox \!!widthb... \loadMPgraphic ...Pgraphics \insertMPfile {#1}{#2} \fi } \handleuseMPgraphic ....\the \currentMPgraphic }{} \placeMPgraphic \fi \deall... \douseMPgraphic ...s [#1][#2]\getvalue {\@@MPG #1} {}\elabelgroup ... l.6 \useMPgraphic{test} Could anybody help please? Cheers, Peter -- http://pmrb.free.fr/contact/

3 4

crash with pdftex-1.40
by Peter Münster 05 Jan '07

05 Jan '07

Hello, this is probably only related to pdfTeX and not to ConTeXt, but I'm too lazy to subscribe yet to another list... ;) While playing around with the new shell escaping in pdftex-1.40, I got the following crash: TeXExec | processing document 'test' TeXExec | no ctx file found TeXExec | tex processing method: context TeXExec | TeX run 1 TeXExec | writing option file test.top TeXExec | using randomseed 121 TeXExec | tex engine: pdftex TeXExec | tex format: cont-en This is pdfTeX, Version 3.141592-1.40.0 (Web2C 7.5.6) \write18 enabled. (/opt/TeX-live/texmf/web2c/natural.tcx) entering extended mode (./test.tex ConTeXt ver: 2007.01.02 13:44 MK II fmt: 2007.1.4 int: english/english language : language en is active system : cont-new loaded (/opt/TeX-live/texmf-context/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex (/opt/TeX-live/texmf-context/tex/context/base/cont-new.mkii)) system : cont-old loaded (/opt/TeX-live/texmf-context/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/opt/TeX-live/texmf-context/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (/home/peter/.TeX/cont-sys.tex (/opt/TeX-live/texmf-context/tex/context/user/cont-sys.rme (/opt/TeX-live/texmf-context/tex/context/base/type-exa.tex) (/opt/TeX-live/texmf-context/tex/context/base/type-syn.tex) (/opt/TeX-live/texmf-context/tex/context/base/type-enc.tex) (/opt/TeX-live/texmf-context/tex/context/base/type-siz.tex) (/opt/TeX-live/texmf-context/tex/context/base/type-map.tex) (/opt/TeX-live/texmf-context/tex/context/base/type-spe.tex) (/opt/TeX-live/texmf-context/tex/context/base/type-akb.tex)) (/home/peter/.TeX/dd-macros.tex loading : Macros for Delta Dore )) bodyfont : 12pt rm is loaded language : patterns nl->texnansi:texnansi->1->2:3 nl->ec:ec->2->2:3 fr-> texnansi:texnansi->3->2:3 fr->ec:ec->4->2:3 de->texnansi:texnansi->5->2:3 de->e c:ec->6->2:3 it->texnansi:texnansi->7->2:3 it->ec:ec->8->2:3 pt->texnansi:texna nsi->9->2:3 pt->ec:ec->10->2:3 hr->ec:ec->11->2:3 pl->pl0:pl0->12->2:3 pl->ec:e c->13->2:3 pl->qx:qx->14->2:3 cz->il2:il2->15->2:3 cz->ec:ec->16->2:3 sk->il2:i l2->17->2:3 sk->ec:ec->18->2:3 sl->ec:ec->19->2:3 ru->t2a:t2a->21->2:3 en->ec:e c->22->2:3 uk->ec:ec->23->2:3 us->ec:ec->24->2:3 agr->agr:agr->25->2:3 da->ec:e c->26->2:3 sv->ec:ec->27->2:3 af->ec:ec->28->2:3 no->ec:ec->29->2:3 deo->ec:ec- >30->2:3 es->ec:ec->31->2:3 ca->ec:ec->32->2:3 la->ec:ec->33->2:3 ro->ec:ec->34 ->2:3 tr->ec:ec->35->2:3 fi->ec:ec->37->2:3 hu->ec:ec->38->2:3 loaded specials : tex,postscript,rokicki loaded system : test.top loaded (./test.top specials : loading definition file tpd (/opt/TeX-live/texmf-context/tex/context/base/spec-tpd.tex specials : loading definition file fdf (/opt/TeX-live/texmf-context/tex/context/base/spec-fdf.tex (/opt/TeX-live/texmf-context/tex/context/base/spec-fdf.mkii)) specials : fdf loaded ) specials : fdf,tpd loaded ) systems : system commands are enabled (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (/opt/TeX-live/texmf-context/tex/context/base/sort-def.tex) (/opt/TeX-live/texmf-context/tex/context/base/sort-lan.tex) (./test.tuo) (./test.tuo) (/opt/TeX-live/texmf-context/tex/context/base/pdfr-def.tex) systems : begin file test at line 1 (./texcmd.tmp) (./texcmd.tmp) (./texcmd.tmp)TeXExec | runtime: 0.318195 *** glibc detected *** pdftex: free(): invalid next size (fast): 0x0850f718 *** ======= Backtrace: ========= /lib/libc.so.6[0xb7dbe911] /lib/libc.so.6(__libc_free+0x84)[0xb7dbff84] pdftex[0x80a54b9] pdftex[0x80774fe] pdftex[0x806b764] pdftex[0x807732e] pdftex[0x80a2d2d] pdftex[0x8059f1c] pdftex[0x80a6e3b] /lib/libc.so.6(__libc_start_main+0xdc)[0xb7d7087c] pdftex[0x804a9e1] ======= Memory map: ======== 08048000-08145000 r-xp 00000000 fe:01 262328 /opt/TeX-live/bin/pdftex 08145000-0815c000 rw-p 000fc000 fe:01 262328 /opt/TeX-live/bin/pdftex 0815c000-08539000 rw-p 0815c000 00:00 0 [heap] b3a00000-b3a21000 rw-p b3a00000 00:00 0 b3a21000-b3b00000 ---p b3a21000 00:00 0 b3b13000-b3b1d000 r-xp 00000000 03:02 114396 /lib/libgcc_s.so.1 b3b1d000-b3b1e000 rw-p 00009000 03:02 114396 /lib/libgcc_s.so.1 b3b3b000-b7d5b000 rw-p b3b3b000 00:00 0 b7d5b000-b7e74000 r-xp 00000000 03:02 114286 /lib/libc-2.4.so b7e74000-b7e76000 r--p 00118000 03:02 114286 /lib/libc-2.4.so b7e76000-b7e78000 rw-p 0011a000 03:02 114286 /lib/libc-2.4.so b7e78000-b7e7b000 rw-p b7e78000 00:00 0 b7e7b000-b7e9e000 r-xp 00000000 03:02 114294 /lib/libm-2.4.so b7e9e000-b7ea0000 rw-p 00022000 03:02 114294 /lib/libm-2.4.so b7ea0000-b7eb1000 r-xp 00000000 03:02 114337 /lib/libz.so.1.2.3 b7eb1000-b7eb2000 rw-p 00010000 03:02 114337 /lib/libz.so.1.2.3 b7eb2000-b7ef0000 r-xp 00000000 fe:04 461393 /usr/lib/libpng.so.3.1.2.8 b7ef0000-b7ef1000 rw-p 0003e000 fe:04 461393 /usr/lib/libpng.so.3.1.2.8 b7f0a000-b7f0f000 rw-p b7f0a000 00:00 0 b7f0f000-b7f10000 r-xp b7f0f000 00:00 0 [vdso] b7f10000-b7f2a000 r-xp 00000000 03:02 114346 /lib/ld-2.4.so b7f2a000-b7f2c000 rw-p 00019000 03:02 114346 /lib/ld-2.4.so bfbda000-bfbef000 rw-p bfbda000 00:00 0 [stack] This is my input: \starttext \def\myCMD#1{% \immediate\write18{echo -n `#1`\letterpercent >texcmd.tmp}% \input texcmd.tmp } X\myCMD{date -d yesterday}X X\myCMD{echo -n Hello World}X \def\myCMD#1{% \input "\string|#1"\unskip } X\myCMD{date -d yesterday}X X\myCMD{echo -n Hello World}X \stoptext But this should be enough to reproduce it: \starttext \input "\string|echo -n bla" \stoptext Cheers, Peter -- http://pmrb.free.fr/contact/

5 5