- ntg-context - NTG Mailing Lists

Vertical text alignment in nested natural tables
by Brian R. Landy 04 Apr '07

04 Apr '07

Hi, I am having a problem using nested natural tables, to which I have a solution but feel that it my not be the proper approach. I'm pretty much a TeX and ConTeXt novice. The problem is that the row height it reduced when a table is nested, breaking vertical text alignment across cells. In my example the cells "SSSSS" and "Swap" to not align vertically due to the presence of the "p". I have an example of the problem and my fix below. I'm curious if someone knows a better way to fix this. Thanks for your help, Brian \starttext Working table:\par \start \bTABLE[frame=on,align={middle,lohi}] \bTR \bTD SSSSS \eTD \bTD Swap \eTD \eTR \eTABLE \stop Nested table changes cell height, breaks text alignment with "lohi":\par \start \bTABLE[frame=on,height=0.50in] \bTR \bTD {\start \bTABLE[frame=on,align={middle,lohi}] \bTR \bTD SSSSS \eTD \bTD Swap \eTD \eTR \eTABLE \stop} \eTD \eTR \eTABLE \stop setting height to baselineskip does not help:\par \start \bTABLE[frame=on,height=0.50in] \bTR \bTD {\start \bTABLE[height=\the\baselineskip,frame=on,align={middle,lohi}] \bTR \bTD SSSSS \eTD \bTD Swap \eTD \eTR \eTABLE \stop} \eTD \eTR \eTABLE \stop One fix is a strut:\par \start \bTABLE[frame=on,height=0.50in] \bTR \bTD {\start \bTABLE[frame=on,align={middle,lohi}] \bTR \bTD \strut{SSSSS} \eTD \bTD \strut{Swap} \eTD \eTR \eTABLE \stop} \eTD \eTR \eTABLE \stop \stoptext

2 3

math: \usemathcollection and \enablemathcollection
by Johannes Kuester 04 Apr '07

04 Apr '07

I'm quite lost with \usemathcollection and \enablemathcollection -- I checked the manual, the wiki, and the source browser, but without success for my problems. I just don't get how math font switching works for e.g. Lucida fonts, and why it does not for my fonts in my setup. So: What is the correct use of \usemathcollection and \enablemathcollection i.e. where should these appear (and where not)? Do I need \enablemathcollection at all? In my current setup (see below), I have two problems: ---- Major problem: I would like to switch my math fonts globally. Currently I have to apply \enablemathcollection e.g. after every \startcolumns (and after other environments as well), otherwise my math fonts are used, but not in the desired encoding, which results in wrong symbols shown. ---- Minor problem: I would like make sure that all math symbols do come from my math fonts and aren't taken from CM or other fonts. Is this possible? E.g. could I get an error message (or some special black box or the like in my pdf file) for each math control sequence which is not (yet) defined in my current mathcollection? My current setup: -- an environment file "env-signa.tex" with (among many other definitions) \usetypescriptfile[type-opticals] \usetypescriptfile[type-minionpro] \usetypescriptfile[type-tymnmath] \usetypescript[MinionPro][ec] \setupbodyfont[MinionPro] \switchtobodyfont[MinionPro,9.6pt] -- a "type-minionpro.tex" file with \starttypescript [serif] [MinionProSizes] [ec] % (followed by many \definefontsynonym) \stoptypescript \starttypescript[MinionPro][ec] \usetypescript[serif][Opticals][size] \usetypescript[serif][MinionProSizes][ec] \usetypescript[newmath][MinionMath] %[size] \definebodyfontenvironment [9.6pt] [\s!text=9.6pt,\s!script=6.8pt,\s!scriptscript=4.9pt, \c!x=8.4pt,\c!xx=5.8pt,\c!big=11pt,\c!small=7.6pt] % further \definebodyfontenvironment entries \enablemathcollection[newmath] \usemathcollection[newmath] \quittypescriptscanning \stoptypescript -- a "math-newmath.tex" file with math font synonyms, definitions and some blocks like \startmathcollection[newmath] % (many \definemathsymbol entries) \stopmathcollection This is a general file for math fonts following "TeX NewMath" encodings (this should develop in a real ConTeXt module for general use) -- a "type-tymnmath.tex" file, setting up my math fonts, with \starttypescript[newmath][MinionMath] % (with % \definefontsynonym % and % \definebodyfont [9.6pt] [mm] % [ ... ] % entries) \stoptypescript -- and of courese a main file with \startproject project_signa \environment env_signa and components (chapter files) with \startcomponent kap_01 \project project_signa Thanks for any help! Johannes -- Johannes Kuester typoma mailto:jk@typoma.com http://www.typoma.com

1 0

--autopdf blues
by Idris Samawi Hamid 04 Apr '07

04 Apr '07

Dear gang, In M$-Windows (and probably unix as well) Acrobat/Reader has the very irritating feature such that, if called from the command line, it forgets its last position and resizes itself to the default position, somewhere in the middle of the screen. This makes --autopdf useless if one wants (like me) to have Acrobat always open up in the same corner of my screen's real estate each time. WinEdt opens Acrobat properly but since I'm moving away from that (no unicode/bidi support) I tried automating things in batch files etc. After hours of struggle I finally learned that clicking on a shortcut to Acrobat/Reader works while running it from the command line will never work right... ...unless one activates the .LNK extension in the system control panel. See http://www.annoyances.org/exec/forum/winxp/1111214434?s Now --autopdf depends on pdfopen.exe, so I can't configure it apparently (tested pdfopen.exe directly). Can pdfopen.exe be recompiled so that it opens Adobe in the last-opened position like a lnk shortcut does? For what it's worth something like > "C:\Documents and Settings\All Users\Desktop\Adobe Acrobat 7.0 > Professional.lnk" foo.pdf will work in a batch/make file in the meantime. But it would be nice if texexec -autopdf did the same thing. Any thoughts? Best Idris -- Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523 -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

1 0

Times as math font
by Vyatcheslav Yatskovsky 04 Apr '07

04 Apr '07

Hello, Could someone be so kind to tell me why I cannot set Times as math font? The line \definetypeface [myFont] [mm] [math,boldmath] [myfont] [default] [encoding=t2a] seems to do nothing; other code works well. \loadmapfile[t2a-monotype-timesttf.map] \usetypescriptfile[type-buy] \usetypescript[serif][fallback] \starttypescript [serif] [myfont] [t2a] \definefontsynonym [Serif] [t2a-TINRPSMT] [encoding=t2a] \definefontsynonym [SerifBold] [t2a-TINRPSBM] [encoding=t2a] \definefontsynonym [SerifItalic] [t2a-TINRPSIM] [encoding=t2a] \definefontsynonym [SerifBoldItalic] [t2a-TINRPSBI] [encoding=t2a] \stoptypescript \definetypeface [myFont] [rm] [serif] [myfont] [default] [encoding=t2a] \definetypeface [myFont] [mm] [math,boldmath] [myfont] [default] [encoding=t2a] \definetypeface [myFont] [tt] [mono] [typewriter][default][encoding=t2a] \setupbodyfont[myFont,12pt] \starttext Uniform distribution (over an interval) means that every number from that interval is equally probable. The probability density function is given as $ f(x) = \left\{ {\matrix{ {{1 \over {b - a}}} & {for\,x \in (a;b)} \cr 0 & {otherwise} \cr } } \right. $ \stoptext -- Best, Vyatcheslav

2 1

Microsoft Word -> Context
by Vyatcheslav Yatskovsky 03 Apr '07

03 Apr '07

Hello, My faculty receives papers in MS Word format. One poor computer literate lady is working very hard to typeset a journal of consistent quality from those papers. All work is performed in MS Word and I consider to suggest her to move to ConText (she don't have a slightest idea of it at the moment, by the way). I already have some fonts and header files to typeset math papers in Russian and I think I could setup all things for her and provide help if needed. Then, we need something like Word2ConText (or a macro written in VBA) to convert incoming papers to ConText code and then easily assemble them. Something, that resembles famous Word2Tex application. What can community say about the sensibility of my idea? And did anyone attempt to implement some conversion tool? Best regards, Vyatcheslav Yatskovsky

7 7

Section title font define
by Roy Zuo 03 Apr '07

03 Apr '07

Hi all, I am going to write my thesis with ConTeXt. The problem is that our University wants chapter titles to be 18 points while body text is 11 points. I do not want to use \switchtobodyfont every time I type a chapter title, but I have no idea how to make it a style in the setup area. Any hints? Thanks a lot. Yous, Roy

4 4

bib question
by Thomas A. Schmitz 03 Apr '07

03 Apr '07

Hi all, not really a question about specific code, but I need an idea: I have a fairly large bibliographical list which is generated from an even larger bibtex database. Now, I want to quote some of the items from this list on my slides, but I want to retain the original numbering in the list, like so: the list: [1] item A [2] item B [3] item C the slide: [2] item B [3] item C Can anyone suggest an approach for this? Or is this impossible with bibtex, and I have to typeset the slides manually? Thanks, and best Thomas

3 6

Publication list ragged right
by Oliver Buerschaper 03 Apr '07

03 Apr '07

Hi all, is there a way of typesetting the publication list ragged right? Unfortunately the following doesn't work: \startalignment[right] \placepublications \stopalignment With each publication item filling barely more than two lines justification looks rather ugly (and causes a number of overfull boxes) ... Best, Oliver

2 3

SciTe setup
by Vyatcheslav Yatskovsky 03 Apr '07

03 Apr '07

Hi, A simple newbie 'abstract' question. How to setup fresh SciTe 1.73 installation to work with context scripts? And a more concrete one: how to load context.properties? Best, Vyatcheslav

2 1

m-bib question: URL, DOI
by Tobias Burnus 02 Apr '07

02 Apr '07

Hello, I have a question regarding URLs and DOIs. I would expect that the attached example file would produce hyperlinks for the DOI and URL, but ConTeXt does not. Using \cite[doi] also produces the wrong output. For doi = 10.1103/PhysRevLett.45.566 I would expect 10.1103/PhysRevLett.45.566 and not: http://dx.doi.org/10.1103/PhysRevLett.45.566 as output. In the reference list, the output is ok, but is no hyperlink. Whether \cite[doi][] should link to the item in the \completepublications list or to the webpage dx.doi.org and whether the link target should depend on \setupcite[interaction=start|stop], is not clear, both options have its merits. In addition, what is the way to insert "#" in URLs? If I don't protect them, I get a TeX error, if I use \# the backslash is printed, too. Tobias

2 2