- ntg-context - Mailing Lists

ConTeXt on FreBSD (was: missing *8t.tfm files)
by Mojca Miklavec 28 Aug '07

28 Aug '07

On 8/27/07, Giorgos Keramidas wrote: > On 2007-08-27 13:22, Mojca Miklavec wrote: > > See: > > http://docs.freebsd.org/cgi/getmsg.cgi?fetch=568536+0+archive/2007/freebsd-… > > http://students.dec.bmth.ac.uk/ebarrett/texlive/ > > Thanks :) > > > Try to install TeXLive 2007. > > I will, but I'm afraid I am not good enough for "porting" it to the > FreeBSD ports. Doesn't something already exist on the link above (I didn't read carefully and I wasn't sure about the FreeBSD/OpenBSD relation)? > > Does > > locate uzcmi8t > > return you anything? > > No, no matches found here. That means that you don't have those fonts (or that they have different names). > > Try to install TeXLive 2007 or minimal ConTeXt distribution. > > I like ConTeXt a lot, so I will try to install a minimal ConTeXt > distribution in my $HOME first, and if that fails I will go the > TeXLive route some time during September. Well, I forgot that there are no minimals for FreeBSD > For now, I will have to stick with the CM fonts for a while, and > finish writing the documents which I want to write. OK, so here is what you need to do to install the non-existing "minimals": Step 1: download from PRAGMA: wget -c http://www.pragma-ade.com/context/install/justtex.zip wget -c http://www.pragma-ade.com/context/install/linuxtex.zip unzip justtex.zip unzip linuxtex.zip Step 2: download binaries from TeXLive 2007 and prepare a freebsd binary folder cd tex mkdir texmf-freebsd cd texmf-freebsd svn co svn://tug.org/texlive/trunk/Master/bin/i386-freebsd mv i386-freebsd bin # perhaps also chmod 755 bin/* mv ../texmf-linux/web2c . cd .. rm -r texmf-linux Step 3: patch setuptex Find the following ines in setuptex: export TEXARCH=`uname -m` export TEXUNIX=`uname -s` if [ "$TEXARCH" = "x86_64" ] ; then export TEXMFOS=$TEXROOT/texmf-linux-64 ; fi if [ "$TEXUNIX" = "Darwin" ] ; then export TEXMFOS=$TEXROOT/texmf-macosx ; fi and add a hardcoded line below them export TEXMFOS=$TEXROOT/texmf-freebsd Step 4: First setup Run . setuptex mktexlsr texexec --make --all texexec --make --all --xtx # don't worry about those below yet if they don't work luatools --generate texexec --make --all --lua Step 5: compile your document cd your-folder texexec your-file Step 6: next time cd folder-with-setuptex . setuptex (I've put that command to .bashrc) If you want TeXLive 2007: svn co svn://tug.org/texlive/trunk/Master ./install-live.sh You can install it in such a way that it doesn't interfere with your old system. Mojca

7 9

Re: [NTG-context] cont-en.fmt
by Istvan Hollerbach 28 Aug '07

28 Aug '07

Mojca Miklavec wrote: > On 8/28/07, Mojca Miklavec <mojca.miklavec.lists(a)gmail.com> wrote: > >> On 8/28/07, Istvan Hollerbach <hollerbi(a)gmail.com> wrote: >> >>> Hello Everybody, >>> >>> kpathsea missis cont-en.fmt, when I want to run command texexec --dvips >>> filename.tex. >>> >> Did you run "texexec --make --all"? >> > > And: what version of ConTeXt are you using? > > ctxtools --contextversion > or > texexec --version > > Dear Mojca, I just now run "texexec --make --all", and I have run texexec --dvips filename.tex again, but kpathsea still misses cont-en.fmt. The version of texexec is 6.2.0, and the version of ConTeXt is 08.08.2007 14:35. Istvan

1 0

new upload
by Hans Hagen 28 Aug '07

28 Aug '07

Hi, I uploaded a new version of mkiv (regular zip). - attribute based color support, thanks to peter rolf for extensive testing of metapost related issues (colo-new.* files, original colo-ini still present do deleting the new ones brings you the old mechanism) - intercharacter spacing based on attributes and node processing - pre/post character spacing (for french) using similar mechanism - case changing using attributes and node processing simple test file for spacing and casing: \starttext test: oeps {\setcharacterspacing[frenchpunctuation] x: xx \bfd x: xx} oeps: test test \WORD{test TEST \TeX} test test \word{test TEST \TeX} test test \Word{test TEST \TeX} test {\setcharacterkerning[extrakerning]\input zapf\endgraf } {\setcharacterkerning[extrakerning]bla bla||bla bla effe fietsen} \hbox{\setcharacterkerning[extrakerning]fietsen} \hbox{\setcharacterkerning[extrakerning]fiet\-sen} \hbox{\setcharacterkerning[extrakerning]} \hbox{\setcharacterkerning[extrakerning]f} \hbox{\setcharacterkerning[extrakerning]fi} \stoptext Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

7 22

cont-en.fmt
by Istvan Hollerbach 28 Aug '07

28 Aug '07

Hello Everybody, kpathsea missis cont-en.fmt, when I want to run command texexec --dvips filename.tex. Istvan

1 0

todays teaser
by Hans Hagen 28 Aug '07

28 Aug '07

% engine=luatex \starttext \installfontfeature[otf][verb] \definefontfeature [test][mode=node,language=dflt,script=latn,verb=yes,featurefile=verbose-digits.fea] \font\test=name:lmroman10regular*test at 20pt \test 1 2 3 4 \stoptext ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

2 4

cweb-scr.pdf and m-cweb
by John Luciani 28 Aug '07

28 Aug '07

Are the source files that were used to create cweb-scr.pdf on the http://www.pragma-ade.com site available for download? I am trying to get ConTeXt working on a cweaved TeX file and am getting an Undefined control sequence error. A working example (especially the source for the cweb-scr files) would be extremely useful. Thanks. (* jcl *) -- http://www.luciani.org

2 2

lost after upgrade
by Jean Magnan de Bornier 27 Aug '07

27 Aug '07

Hi all, Yesterday I issued: ctxtools --updatecontext and everything seemed as usual. But when trying to compile a standard file, I get: ... ConTeXt ver: 2007.08.20 22:17 MKII fmt: 2007.8.21 int: english/english language : language en is active system : cont-new loaded (/usr/local/texlive/2007/../texmf-local/tex/context/base/cont-new.tex FatalError : Your format does not match the base files! FormatVersion : 2007.08.20 22:17 MKII FilesVersion : 2007.08.27 09:11 ... and it fails. I tried to go to all the steps described in the wiki (for texlive install), no joy :-( tia, -- Jean

3 5

Inter row space in tabulate
by Aditya Mahajan 27 Aug '07

27 Aug '07

Hi, Is there some easy way to make tabulate more spaced out? I could not find anything in core-tbl. Aditya

2 1

Streams ignore textwidth
by Aditya Mahajan 27 Aug '07

27 Aug '07

Hi, In streams width=whatever only sets the width of the bounding box, the text still goes until \textwidth. Is this a bug or a feature? A work around is to use setups:stream:settings, but it is a bit clumsy. See the differece between the two streams below. \usemodule[streams] \definestreamlayer[flash][width=3in] \definestreamlayer[model][width=3in] \startsetups streamlayer:flash:settings \hsize=3in \stopsetups \starttext \startstreamlayer[flash] \input tufte \stopstreamlayer \startstreamlayer[model] \input tufte \stopstreamlayer \framed[sturt=no]{\placestreamlayer[flash]} \framed[sturt=no]{\placestreamlayer[model]} \stoptext Aditya

2 1

Lilypond MKIV, pstopdf, sysctl errors?
by David Wooten 27 Aug '07

27 Aug '07

Greetings all, In trying to run Mojca's latest Lilypond extension with MKIV (on an Intel Mac), I've been receiving the errors after pstopdf is run, which I've never seen before: *** sysctlbyname_with_pid: sysctl failed:Operation not permitted is_pid_native: sysctlbyname_with_pid failed:Operation not permitted *** This is from near the bottom of the log file (included below). These errors do not always appear, but once they start, they don't go away. Furthermore, I receive the message: 2007-08-26 16:36:16.584 open[2988] No such file: /Users/wooten/ Desktop/Test/LilyLua-lilypond-1.pdf When it does actually exist, and I have to run texmfstart again to get a changed PDF. I can't find much on the sysctl errors. Anyone see a possible connection? Best, David *** texmfstart texexec --pass=\'-halt-on-error -file-line-error\' LilyLua.tex TeXExec | processing document 'LilyLua.tex' TeXExec | no ctx file found TeXExec | tex processing method: context TeXExec | TeX run 1 TeXExec | writing option file LilyLua.top TeXExec | using randomseed 1137 TeXExec | tex engine: luatex TeXExec | tex format: cont-en This is luaTeX, Version 3.141592-beta-0.10.1-2007072304 (Web2C 7.5.6) (./LilyLua.texMissing script file ConTeXt ver: 2007.08.26 21:41 MKIV fmt: 2007.8.26 int: english/ english language : language en is active system : cont-new loaded (/Users/wooten/conTeXt/tex/texmf-local/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex (/Users/wooten/conTeXt/tex/texmf-local/tex/context/base/cont- new.mkiv) (/Users/wooten/conTeXt/tex/texmf-local/tex/context/base/ cont-mtx.tex)) system : cont-old loaded (/Users/wooten/conTeXt/tex/texmf-local/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/Users/wooten/conTeXt/tex/texmf-local/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (/Users/wooten/conTeXt/tex/texmf-local/tex/context/user/cont-sys.tex) bodyfont : 12pt rm is loaded language : patterns nl->default:default->1->2:3 fr- >default:default->2->2:3 de->default:default->3->2:3 it- >default:default->4->2:3 pt->default:default->5->2:3 hr- >default:default->6->2:3 pl->default:default->7->2:3 cz- >default:default->8->2:3 sk->default:default->9->2:3 sl- >default:default->10->2:3 ru->default:default->12->2:3 en- >default:default->13->2:3 uk->default:default->14->2:3 us- >default:default->[13]->2:3 agr->default:default->15->2:3 da- >default:default->16->2:3 sv->default:default->17->2:3 af- >default:default->[1]->2:3 no->default:default->18->2:3 deo- >default:default->19->2:3 es->default:default->20->2:3 ca- >default:default->21->2:3 la->default:default->22->2:3 ro- >default:default->23->2:3 tr->default:default->24->2:3 fi- >default:default->26->2:3 hu->default:default->27->2:3 loaded specials : tex,postscript,rokicki loaded system : LilyLua.top loaded (./LilyLua.top specials : loading definition file tpd (/Users/wooten/conTeXt/tex/texmf-local/tex/context/base/spec-tpd.tex specials : loading definition file fdf (/Users/wooten/conTeXt/tex/texmf-local/tex/context/base/spec-fdf.tex (/Users/wooten/conTeXt/tex/texmf-local/tex/context/base/spec-fdf.mkiv)) specials : fdf loaded ) specials : fdf,tpd loaded ) system : module lilypond loaded (/Users/wooten/conTeXt/tex/texmf-local/tex/context/third/t- lilypond.tex) (./LilyLua.tuo) (./LilyLua.tuo) systems : begin file LilyLua at line 5 (/Users/wooten/conTeXt/tex/texmf-local/tex/context/sample/knuth.tex){/ Users/wooten/conTeXt/tex/texmf-local/fonts/map/pdftex/context/ original-empty.map}{/Users/wooten/conTeXt/tex/texmf/fonts/map/dvips/ lm/lm-texnansi.map}{/Users/wooten/conTeXt/tex/texmf-local/fonts/map/ pdftex/context/original-base.map}{/Users/wooten/conTeXt/tex/texmf/ fonts/map/dvips/lm/lm-ec.map}{/Users/wooten/conTeXt/tex/texmf/fonts/ map/dvips/lm/lm-math.map}{/Users/wooten/conTeXt/tex/texmf/fonts/map/ dvips/lm/lm-rm.map}{/Users/wooten/conTeXt/tex/texmf-local/fonts/map/ pdftex/context/original-ams-base.map}{/Users/wooten/conTeXt/tex/texmf- local/fonts/map/pdftex/context/original-ams-euler.map}{/Users/wooten/ conTeXt/tex/texmf-local/fonts/map/pdftex/context/original-public- lm.map} <./LilyLua-lilypond-1.pdf> figures : dimensions of LilyLua-lilypond-1.pdf loaded from figurefile itself Overfull \hbox (6.83257pt too wide) in paragraph at lines 16--17 [][][] lua : input load time - 0.040 seconds lua : fonts load time - 1.030 seconds lua : mps conversion time - 0.000 seconds lua : node processing time - 0.000 seconds lua : attribute processing time - 0.010 seconds lua : used config path - /Users/wooten/conTeXt/tex/texmf{- local,}/web2c lua : used cache path - /Users/wooten/.conTeXt-temp/ luatex-cache/context/613f059707fe40567271dc8baeac0123 lua : modules/dumps/instances - 68/15/1 lua : current memory usage - 76116875 bytes lua : loaded fonts - lmex10:tfm lmmi12:tfm lmmi7:tfm lmmi9:tfm lmroman10-bolditalic*default:otf lmroman10- boldoblique*default:otf lmroman10-capsregular*default:otf lmroman10- italic*default:otf lmroman10-oblique*default:otf lmroman12- bold*default:otf lmroman12-italic*default:otf lmroman12- oblique*default:otf lmroman12-regular*default:otf lmroman7- bold*default:otf lmroman7-regular*default:otf lmroman9- bold*default:otf lmroman9-italic*default:otf lmroman9- oblique*default:otf lmroman9-regular*default:otf lmsy10:tfm lmsy7:tfm lmsy9:tfm msam10:tfm msam7:tfm msbm10:tfm msbm7:tfm rm-lmr12:tfm rm- lmr7:tfm rm-lmr9:tfm [1.1] systems : end file LilyLua at line 18 ) (see the transcript file for additional information) in use: 2305 node words from 100603 still untouched: 92004 node words size 1 avail list: 21 size 2 avail list: 358 size 3 avail list: 1149 size 4 avail list: 344 size 5 avail list: 3140 size 6 avail list: 210 size 8 avail list: 1016 size 11 avail list: 55 </Users/wooten/conTeXt/tex/texmf/fonts/opentype/public/lm/lmroman12- regular.otf> Output written on LilyLua.pdf (1 page, 16883 bytes). Transcript written on LilyLua.log. LuaTools | running command: luatex --fmt="/Users/wooten/.conTeXt-temp/ luatex-cache/context/613f059707fe40567271dc8baeac0123/formats/cont- en" --lua="/Users/wooten/.conTeXt-temp/luatex-cache/context/ 613f059707fe40567271dc8baeac0123/formats/cont-en.luc" "LilyLua.tex" LuaTools | LuaTools | runtime: 0.03 seconds TeXUtil | parsing file LilyLua.tui TeXUtil | shortcuts : 0 TeXUtil | expansions: 0 TeXUtil | reductions: 0 TeXUtil | divisions : 0 TeXUtil | loaded files: 1 TeXUtil | temporary files: 0 TeXUtil | commands: 2 TeXUtil | programs: 2 TeXUtil | tuo file saved TeXUtil | running texmfstart --ifchanged=LilyLua-lilypond-1.tmp -- exec bin:lilypond -b eps -dno-gs-load-fonts -dinclude-eps-fonts LilyLua-lilypond-1.tmp Processing `LilyLua-lilypond-1.tmp' Parsing... Interpreting music... [6] Preprocessing graphical objects... Writing LilyLua-lilypond-1-systems.tex... Writing LilyLua-lilypond-1-systems.texi... Layout output to `LilyLua-lilypond-1-1.eps'... Converting to `LilyLua-lilypond-1-1.pdf'... Layout output to `LilyLua-lilypond-1.eps'... Converting to `LilyLua-lilypond-1.pdf'... TeXUtil | running texmfstart --ifchanged=LilyLua-lilypond-1.eps pstopdf LilyLua-lilypond-1.eps sysctlbyname_with_pid: sysctl failed:Operation not permitted is_pid_native: sysctlbyname_with_pid failed:Operation not permitted PsToPdf | converting eps (ps) into pdf PsToPdf | conversion method 2 PsToPdf | converting LilyLua-lilypond-1.eps bounded 2007-08-26 16:36:16.584 open[2988] No such file: /Users/wooten/ Desktop/Test/LilyLua-lilypond-1.pdf TeXExec | renaming LilyLua.tua into LilyLua.tuc TeXExec | runtime: 5.430473

2 4