- ntg-context - Mailing Lists

Howard Wilner - 1994 Ford Bronco
by Allison Wallock 08 Dec '07

08 Dec '07

Howard Wilner,The Ford Bronco is in the same category as Chevrolet's big Blazer and the GMC Yukon-somewhat aged but still selling to fans of the big, brawny V8powered four-wheelers. It's our impression that Ford has done a little more upgrading on the Bronco than either Chevrolet or GMC has done with its offerings. We tested an Eddie Bauer Edition and felt as though we just put on an old favorite pair of hunting boots. A word of caution: If you're looking for a 4WD sport utility to complement your suburban gentility, this probably isn't your vehicle. Bronco is a big, powerful off-roader that you have to clamber into. Although its road manners are tame enough, this vehicle is built for more than an occasional trip off the pavement. It also looks good. Like the Chevy K Blazer, the Bronco is a bit of a dinosaur. It's big, bulky, hard to climb into and somewhat outdated in looks and off-road chic. But the vehicle also has a staunch following who love its brawn, bulk and impressive power. Even on the most rugged trails of our test drive, the Bronco exhibited little body roll or choppiness. Add to this an interior that is comfortable, functional and pretty darn good-looking, and the package becomes even more attractive. http://automax-howardwilner.com/

3 2

bug in new context/luatex?
by zs 08 Dec '07

08 Dec '07

Hi all. This simple code causes context/luatex to freeze on my linux box. Could anyone reproduce it to make sure the problem is not on my side. \starttext \starttable[|c|c|] \NC \NC \NC\AR \DC\DL\DR \NC \NC \NC\AR \stoptable \stoptext This is LuaTeX, Version snapshot-0.20.0-2007120712 (Web2C 7.5.6) ConTeXt ver: 2007.12.06 22:52 MKIV fmt: 2007.12.7 int: english/english

4 7

problem with \setupcombinedlist[content][alternative=c]
by Peter Münster 07 Dec '07

07 Dec '07

Hello, With luatex-0.20.0 and ConTeXt-2007.12.6 the \completecontent is messed up and the first paragraphs are supressed: % engine=luatex \setupcombinedlist[content][alternative=c] \starttext \completecontent \dorecurse{10}{ \section{sec} \input tufte \subsection{subsec} \input tufte \subsection{subsec} \input tufte \subsection{subsec} \input tufte } \stoptext Cheers, Peter -- http://pmrb.free.fr/contact/

3 4

Re: [NTG-context] how to change 'figure 1.1' to '?? 1.1'
by Dalyoung Jeong 07 Dec '07

07 Dec '07

Dear Mojca and Wolfgang, Thank you for the comments on lang-kor.tex. > I didn't test, but I would say: forget the dirty hacks and simply > write > \setuplabeltext [\s!ko] [\v!figure=??] > It might not work in pdfTeX, but for XeTeX and LuaTeX it should do > the job. Once you do those changes, feel free to ask again if you > have problems (and don't forget to ask Hans to include the > translations). I modify the files following your advice. It removes the middle variable "\koencoding" and make the file simpler. And I don't need to use "\koencoding{\enableencoding[cjk- uni]}". It worked fine, also. But I'd like to use \setuphead for chapter, section, etc because our writing style of head is different from that of english. I uploaded it in KTUG board to be checked by them, since it may be need more corrections. Thank you again. By the way, do you completely resolve the "lmtypewriter10-regular" problem? which was discussed before in the list? Yesterday, after I reinstalled TeXlive and updated ConTeXt, I got "kpathsea: Running mktextfm lmtypewriter10-regular " message. As a temporary method, I renamed mktextfm. I confirmed that such font file is in texlive opentype font folder and lm*.map files in map/dvipdfm folder. Is there anything that I have to do more? I couldn't see the solution in the list. Thank you for reading. Best regards, Dalyoung

2 1

booklet set up
by Vyatcheslav Yatskovsky 07 Dec '07

07 Dec '07

Hello, I'm creating a textbook as a booklet (two A5 per A4), and have difficulties. 1) If I use imposition command \setuparranging, then Luatex doesn't process references. I know, there are workarounds, but I prefer to create A5 pages and then impose them using nice Acrobat plugin. However, I don't know how to make Luatex to process left and right pages differently (for future imposing). If I set "left margin", then it is really left through the document, but I need it to be on the right every second page, and vice versa. How to achieve it? (I tried 'mirrored' option in \setuppapersize, and got funny result) ;) 2) I was always scared by explanation of \showlayout on texshow: "Horizontal: (if singleside then outside is at right and inside is at left) =========== width => width of text area middle: automatic calculation consider A) params fit: automatic calculation consider A)+B) params dimension: cutspace should be 0 and is calculated according to backspace A) params: (\paperwidth=\backspace+\makeupwidth+\cutspace) backspace => width of inner margin cutspace => width of outer margin (if 0 then = backspace!) "... and so on. It looks like a program, not manual, and I never understood it, despite it explains very important concept, missed on Wiki -- 'fit' and 'middle' options. Can someone throw a light on these? Best regards, Vyatcheslav

4 4

forbidden filenames in context?
by Roger Mason 07 Dec '07

07 Dec '07

Hello, I have two identical files, one named main.ctx.tex and the other tmp.ctx.tmp. The latter was made by copying the former. Both files contain just this: \starttext \stoptext %%% Local Variables: %%% mode: context %%% TeX-master: t %%% End: tmp.ctx.tex compiles fine, but main.ctx.tex fails with this error: system : main.ctx.top loaded (./main.ctx.top) (./main.ctx.tuo) (./main.ctx.tuo) (./main.ctx.tuo) (./main.ctx.tuo) (./main.ctx.tuo) (./main.ctx.tuo) (./main.ctx.tuo) (./main.ctx.tuo) (./main.ctx.tuo) (./main.ctx.tuo) (./main.ctx.tuo) (./main.ctx.tuo ! Missing \endcsname inserted. <to be read again> \let \noshowargumenterror ->\let \expectedarguments \noexpectedarguments \dotripleempty #1->\noshowargumenterror \doifnextcharelse [{\dotripletestemp... <argument> ...oss \fileprefix fig:\externalfigure [dummy \ifundefined #1->\unless \ifcsname #1 \endcsname \mainreference ...ined {\r!cross \fileprefix #1#2} \ifcase \autocrossfilerefe... l.11 ...re [dummy}{2::0:0:0:0:0:0:0::2}{2}{{1}{]}} ? x No pages of output. Are some filenames forbidden in Context? Puzzled, Roger

3 3

Re: [NTG-context] backward compatibility [URGENT]
by Hans Hagen 07 Dec '07

07 Dec '07

Steffen Wolfrum wrote: > > Am 07.12.2007 um 10:06 schrieb Hans Hagen: > >> can you check the fonts being used? maybe older docs use ec and newer >> texnansi and kerning as well as ligs may differ > > > checking with acrobat the fonts actually used in the two pdfs gives both > the same result, no change: > > NimbusRomNo9L-Medi (embedded Subset) > Type: Type 1 > Encoding: Custom > NimbusRomNo9L-Regu (embedded Subset) > Type: Type 1 > Encoding: Custom > NimbusRomNo9L-ReguItal (embedded Subset) > Type: Type 1 > Encoding: Custom > rtxmi (embedded Subset) > Type: Type 1 > Encoding: Built-in > > > > nevertheless the two logs also have differences regarding fonts: > > with version 2007.08.09: > > fonts : using map file: lm-texnansi > {/usr/local/texlive/2007/texmf-dist/fonts/map/dvips/lm/lm-texnansi.map} > fonts : using map file: original-base > {/usr/local/texlive/2007/../texmf-local/fonts/map/pdftex/context/original-base. > > map} > > > now: > > fonts : using map file: original-base > {/usr/local/texlive/2007/../texmf-local/fonts/map/pdftex/context/original-base. > > map} > > > > Any idea? switch to ec encoding and see what happens ... in the past there were no texnansi cmr files (only pseudo ec == aer) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

4 5

hyphen with \useURL
by Peter Münster 07 Dec '07

07 Dec '07

Hello, With luatex-0.20.0 and ConTeXt-2007.12.6 a hyphen is introduced in the following URL: % engine=luatex \setupinteraction[state=start] \starttext \useURL[ref][http://gaston/]\from[ref] \stoptext Cheers, Peter -- http://pmrb.free.fr/contact/

2 1

backward compatibility [URGENT]
by Steffen Wolfrum 07 Dec '07

07 Dec '07

Hi, re-typesetting a book (that was last set with ConTeXt ver: 2007.08.09) I had to see that several pages now have a different line- break (and so the page-break and the TOC and the index register are changed) ... quite a mess. I guess is not so easy to find out what changes in the ConTeXt source result in these changes now. So to continue work it will be probably better to downgrade again my ConTeXt. Is there an easy way to do this, like using sudo ctxtools -- updatecontext and use the respective files from the museum? Thanks, Steffen

5 7

Unicode characters by number
by Maurício 07 Dec '07

07 Dec '07

Hi, Is it possible to enter an Unicode character in a Context file using the character Unicode number? How can I do that? Thanks, Maurício

2 1