- ntg-context - Mailing Lists

resetting local footnote number (conversion = character)
by Bowen Alan C. 06 Jan '10

06 Jan '10

Yet another try. I have some local footnotes (conversion = character) and would like to reset set the counter (a) to “a” and (b) to a specific value other than “a”. How can I do this? re (a) \resetnumber[localfootnote] does not work. ! Missing \endcsname inserted. <to be read again> \numberlocalfootnotenumber \setcounter #1#2->\@EA \xdef \csname #1 \endcsname {\the \numexpr #2\relax } l.217 \resetnumber[localfootnote] Am I even right to assume that there is a pre-defined localfootnote counter? Alan

1 0

cutmarks length setting?
by Hans van der Meer 06 Jan '10

06 Jan '10

I would like to make the cutmarks (those placed around the four corners of a page) a little longer. I have looked into the sources (contextbeta) but could not spot where to set the length of these lines. What do I have to do to vary their length? Hans van der Meer

2 1

startbuffer fails with %
by H. van der Meer 06 Jan '10

06 Jan '10

\startbuffer[ABC]% {} Braces at beginning fails with buffer \stopbuffer \starttext \getbuffer[ABC] \stoptext Error message: ! File ended while scanning use of \dododowithbuffer. <inserted text> \par Remove the {}'s at the beginning and all is well. The culprit however is the % in the first line; remove and the braces do no harm. I suspect that a missed newline is the cause. If that cannot be remedied, I advise adding a warning in the manual. Hans van der Meer

2 1

Referencing...
by Willi Egger 05 Jan '10

05 Jan '10

Hi, I have small tabulations which contain references to footnotes in the header line. - The footnotes are placed correctly, how ever if I refer to the references I get in 2 out of the three cases ?? i.e. ConTeXt does not know the reference. I am puzzled because it works for the third reference... When extending the list of footnotes again the referencing works only for the last reference. Is there something changed in the approach in MKIV? \starttext \starttabulate[|l|c|r|r|r|] \NC Issue \NC Time \NC Avg.\footnote[av]{Average log\low{10} values} \NC s\footnote[stdv]{Standard deviation} \NC se\footnote[se]{Standard error of the mean} \NC\NR \NC A \EQ 1 \NC 3.85 \NC 1.06 \NC 0.31 \NC\NR \stoptabulate \starttabulate[|l|c|r|r|r|] \NC Issue \NC Time \NC Avg.\note[av] \NC s\note[stdv] \NC se\note[se] \NC\NR \NC B \EQ 1 \NC 1.18 \NC 0.8 \NC 0.23 \NC\NR \stoptabulate Look at s\note[av] \stoptext I am using: This is LuaTeX, Version beta-0.50.0-2009122422 ConTeXt ver: 2010.01.03 12:54 MKIV fmt: 2010.1.4 int: english/english Kind regards Willi

2 1

defineenumeration does not work with MKIV. Works with MKII
by Curiouslearn 05 Jan '10

05 Jan '10

Minimal example \setuppapersize[letter][letter] \starttext \defineenumeration[problem][text= ,location=inleft] \setupenumerations[problem][stopper=)] \problem problem 1 \problem problem 2 \stoptext In MKIV there are numbers do not appear. Thanks.

3 10

Cannot make \digits work with palatino
by Alexandre Patry 05 Jan '10

05 Jan '10

Hi, when I use the \digits command with default fonts, everything work fine. However, when I set the fonts to palatino, the following documents print "1:234;56" instead of "1.234,56" 8<--------------------------------- \usetypescript[palatino][ec] \definetypeface [palatino] [mm] [math] [euler] [euler][rscale=1.03] \setupbodyfont[palatino,12pt] \starttext \digits{1.234,56} \stoptext 8<--------------------------------- Am I doing something wrong? Thanks, Alexandre

3 3

resetting local footnote number (conversion = character)
by Bowen Alan C. 04 Jan '10

04 Jan '10

I have some local footnotes (conversion = character) and would like to set the counter to a specific value other than “a”. How can I do this? Alan

1 0

Thoughts on ConTeXt: ditched
by Manuel P. 04 Jan '10

04 Jan '10

ConTeXt is a good software. I was impressed with a manual typesetted with it and decided to give it a try. After some small documents, despite my ridicously small knowledge of it I decided to use ConTeXt for my thesis. Bad move. ConTeXt is beautiful because it's very configurable, for the most uses doesn't need any external module (unlike LaTeX), and gives me more power on the presentation of the document. But in a few days of work I've come to realize that it's not suited for me and this project. I've had some unpleasant surprises: - Bibliography doesn't work the way it should on MKIV. Unlike MKII. - MKIV, unlike MKII, doesn't setup any background color: ---- \setupcolors[state=start] \setupbackground[background=screen] \setupbackground[state=start] \def\quotebox#1#2 {\blank \midaligned{\startbackground \quotation{\em #1} \crlf --#2 \stopbackground} \blank} ---- - the above \quotebox command, in some cases, sends pdftex and luatex (MKII and MKIV) to the moon with an infinite loop (100% CPU). One reason for this is probably my very limited knowledge and experience with ConTeXt. It's extremely configurable, and this is a plus. But on the other hand if you don't know how to move, what to do, the system internals and how any configuration affect the typesetting, a lot of thing won't work. And worse, you won't know where to bump your head. I don't have time to read the reference manual (I've already read the excursion) because the deadline is too near, so I have to call defeat and go to the LaTeX camp. I've wasted days of work, now I can't afford more of that. It's a learning experience: don't use an "experimental" (new for me) tool for an important job. Stick to the tried&tested ones, and use new stuff only in a safe context (without a near hard deadline). Maybe, in some future, I'll take again ConTeXt and try to learn it the proper way. But for now, it's "fired". For your patience, time and help: thanks to all of you! A little wish: I hope that when I'll return here there'll be good documentation (user-oriented) and a single (througly tested, see TDD/BDD approaches) reference implementation. -- Manuel P.

9 15

\framedparameter
by Wolfgang Schuster 04 Jan '10

04 Jan '10

Hi Hans, in MkII the following is possible without problems: \setupcolors[state=start] \startuseMPgraphic{frameborder} drawoptions(withcolor \MPcolor{\framedparameter{framecolor}}) ; draw topboundary OverlayBox withpen pencircle scaled \the\dimexpr\framedparameter{toprulethickness}\relax ; draw bottomboundary OverlayBox withpen pencircle scaled \the\dimexpr\framedparameter{bottomrulethickness}\relax ; draw leftboundary OverlayBox withpen pencircle scaled \the\dimexpr\framedparameter{leftrulethickness}\relax ; draw rightboundary OverlayBox withpen pencircle scaled \the\dimexpr\framedparameter{rightrulethickness}\relax ; setbounds currentpicture to OverlayBox ; \stopuseMPgraphic \defineoverlay[frameborder][\useMPgraphic{frameborder}] \defineframed [mpframed] [ toprulethickness=\framedparameter{rulethickness}, bottomrulethickness=\framedparameter{rulethickness}, leftrulethickness=\framedparameter{rulethickness}, rightrulethickness=\framedparameter{rulethickness}, background=frameborder] \starttext \mpframed[width=4cm,height=4cm,toprulethickness=1pt,framecolor=red]{text} \stoptext In MkIV this is no longer possible because \framedparameter accepts only protected keys (e.g. \c!rulethickness) and on the fly key-value-pairs like 'toprulethickness=\framedparameter{rulethickness}' are also useless because you need now \c!toprulethickness to use the value in another command like metapost graphics. Can you provide a mechanism to access these values again on the user side, e.g. \userparameter{framed:toprulethickness}. Best regards, Wolfgang

2 2

A thesis not just using, but on, ConTeXt.
by John Haltiwanger 04 Jan '10

04 Jan '10

I have narrowed down my subject options for a masters thesis (New Media at Universiteit van Amsterdam) and landed on a software study<http://en.wikipedia.org/wiki/Software_studies>of TeX through the lens of ConTeXt/LuaTeX (the idea being to document the cutting edge). For instance, the many materialities of a TeX document, the fact that it exists as a source file, an evolving memory heap during compilation, a ready-to-print document, and (often) as a print document. Part of my thesis, and a good reason to investigate ConTeXt, is exploring the material aspects of texts generated specifically for on-screen use/how an interlinked PDF differs from a website/etc. Naturally, a materialist analysis leads to discussing liberational potential, and the entire assemblage of TeX will be examined in light of Benkler's 'virtuous software'. (See Benkler<http://www.nyu.edu/projects/nissenbaum/papers/jopp_235.pdf>or me<http://mastersofmedia.hum.uva.nl/2009/11/01/git-virtue-github-and-commons-b…>for more.) More, I'm sure, will arise. The second half of the thesis is an operational component: setting up an online collaborative web application (with Ruby Waves <http://rubywaves.com>) that is able to interweave git, reST/markdown/HTML (or a new one of my own that I convert to ConTeXt), pandoc (unless option 2), and ConTeXt to craft a system capable of outputting anything, not the least of which a PDF with layout and typesetting specific to that system (in this case, a new open, post/pure peer review journal of new media studies). I feel this must be possible because I've read that some of you folks are running highly automated typesetting jobs with ConTeXt. However, it occurs to me I should discuss the feasibility of at least the operational component with you folks before I end up trying to develop something impossible come March. The theoretical component relates to the operational component in as much as it seeks to justify it--this part is basically saying 'typesetting matters' but in the sense that a good typeset will a) make the journal feel much more established and allow an easy means to produce an on-demand print version, and b) liberate the information in as much as it is available in both PDF and machine-parsable ASCII, along with everything in between. Hmmm, maybe that _is_ taking a bit on.. Especially sense I don't know much ConTeXt at the moment (for instance, not using them on my final papers this semester). However, I will have significant time to dedicate to this thesis (all day every day starting March), and I've become something of an obsessive about TeX and typesetting, despite not having a lot of free time to dedicate right this second. For instance I find myself reading the Mark IV documentation (perfect for a software studies, btw!) rather than other, perhaps more pressing things. I guess I'm just sending a ping out to see what kind of response you folks have to such a project. I don't feel as if anything is set in stone, per se. The final proposal presentation is yet to happen, so I have time to make changes. Sincerely, John Haltiwanger

1 0