July 2012 - ntg-context - NTG Mailing Lists

alignment in TABLE
by Peter Münster 25 Jul '12

25 Jul '12

Hi, How could I please align vertically the 2 table cells in the following example: --8<---------------cut here---------------start------------->8--- \starttext \bTABLE \bTR \bTD 1 \eTD \bTD \framed{1 Über} \eTD \eTR \eTABLE \stoptext --8<---------------cut here---------------end--------------->8--- I've tried various combination with offset=0pt/overlay, strut=yes/no, rulethickness=0pt, but without success... TIA for any help! -- Peter

6 6

\input filename causes error.
by john Culleton 25 Jul '12

25 Jul '12

If I set up my main file thus: \starttext \input title.tex \input copyright.tex \startfrontmatter \completecontent \chapter{Introduction} \stopfrontmatter \startbodymatter \input body.tex \stopbodymatter \startappendices \stopappendices \startbackmatter \chapter{Index} %\chapter{Acknowledgement} \title{Colofon} \stoptext and set up my title.tex file thus: \startstandardmakekup Foo \stopstandardmakekup then "\startstandardmakeup" generates an error. I can work around it of course. I just wonder why it happens. The use of the \input file should be transparent to the rest of TeX. MKIV on slackware Linux. -- John Culleton Free list of books for self-publishers: http://wexfordpress.net/shortlist.html

3 2

Bug with rule between columns in columnset
by Marco 24 Jul '12

24 Jul '12

Hi, this seems like a bug in the MetaFun or column set code. Printing a vertical rule between columns fails with ! terminal: >> NOfTextColumns-1 ! Improper final value has been replaced by 0. <to be read again> The code also fails, when the column set code is commented out, but then the NOfTextColumns doesn't make sense any longer. Older betas work perfectly. \startuseMPgraphic{verticalline} for i=1 upto NOfTextColumns-1 : draw (rightboundary TextColumns[i]) shifted (2.5mm,0) shifted -\MPxy\textanchor; endfor ; setbounds currentpicture to OverlayBox ; \stopuseMPgraphic \defineoverlay [verticalline] [\useMPgraphic{verticalline}] \setupbackgrounds [text] [background=verticalline] \definecolumnset [example] [n=2] \starttext \startcolumnset [example] \input knuth \stopcolumnset \stoptext Marco

2 2

Too large value of \definecolumnsethsize
by Marco 24 Jul '12

24 Jul '12

Hi, the following test file has a weird page break, caused by a too wide image set with \definecolumnsethsize. I am talking about the blank space at the right of the image. \definecolumnsethsize defines a with of 202.01262pt, that's too wide, 202pt would be correct, I guess. Is that a rounding error? If the figure width is slightly decreased (see the commented part), the first page looks as intended. But that's exactly what the command \definecolumnsethsize is for -- to get the correct size. Another workaround is to define the column width, so it is a know value. The behaviour is reproducible in all betas. Bug or not? \useMPlibrary [dum] \definecolumnset [MyColumns] [distance=8mm] \starttext \startcolumnset [MyColumns] \definecolumnsethsize{MyColumns}{1}{1}\ColumnWidth \input knuth \startplacefigure \externalfigure [dummy] [width=\ColumnWidth, height=9.5cm] %\externalfigure [dummy] %[width=\dimexpr\ColumnWidth-1pt\relax, height=9.5cm] \stopplacefigure \dorecurse{4}{\input knuth} \stopcolumnset \stoptext Marco

1 0

simpleslides help needed
by Pavneet Arora 24 Jul '12

24 Jul '12

Hello all, I am here at TUG 2012 updating the presentation that I am to give in the morning. I have had a couple of lingering questions regarding simpleslides that I thought I would put out there. They are not show stoppers, and I have lived with them in my other presentations. It is just that with my brain on TeX (and ConTeXt) for the past few days, I thought that I would try to resolve them once and for all. 1. Fonts I would like to specify separate mainfont and bodyfont using the simplefonts module (or some other consistent mechanism). I have read the thread from: http://www.ntg.nl/pipermail/ntg-context/2011/056495.html and have tried to split up Wolfgang's suggestion into the two parts. I have tried: \usemodule[simplefonts][size=18pt] \setmainfont[grandesignneueserif] \setupbodyfont[dejavuserif] which gets me the title font, but not the body font. The other approach: \definetypeface[mainface][rm][serif][DejaVu Serif][default] \definetypeface[mainface][ss][sans][DejaVu Sans][default] \definetypeface[mainface][tt][mono][Inconsolata][default] \setupbodyfont[mainface] also doesn't seem to work at all. I get what I believe to be Latin Modern Sans across the board. I have resorted to using one of the default fonts via the module switch for now, but would like to customize the font selection to my taste. 2. Margins I have the following slide, where only the right margin is affected. I have tried variations on backspace, width and margin but haven't gotten the left margin to move. >>>> \definelayout[quotation][leftmargin=1.5in,rightmargin=1.5in] \SlideTitle{An exception: Lotus Improv, an exceptional spreadsheet} \blank \setuplayout[quotation] \quotation{Pito Salas, a developer at ATG, decided to attack this problem. After a few months of studying existing real-world examples, it became clear that the data, views of that data, and the formulas that acted on that data were very separate concepts. Yet in every case, the existing spreadsheet programs required the user to type all of these items into the same (typically single) sheet's cells.} \par \setuplayout[reset] \startalignment[flushright] \blank[2*big] {\em Source: Wikipedia:Lotus Improv} <<<< I am sure that it is something simple that I am missing here, but any guidance would be most appreciated. Many thanks. -- ----- - Pavneet Arora

5 11

Frame around columnsets
by Marco 24 Jul '12

24 Jul '12

Hi, the following example produces a frame around the columns since a few betas. Looks like a bug. \definecolumnset [MyColumns] [n=2] \starttext \startcolumnset [MyColumns] \input knuth \stopcolumnset \stoptext Marco

3 2

Re: [NTG-context] about \startformula\startalign error
by dalyoung 24 Jul '12

24 Jul '12

Dear Aditya, Using "\framed[]{}", I got a good output. As you said, it might be better to define a macro for it. Thank you. Best regards, Dalyoung

1 0

Broken Nightly (2012.07.21 16:50)
by Kip Warner 24 Jul '12

24 Jul '12

Hey list, Reporting what I suspect is a broken nightly for the 2012.07.21 16:50 build on my book. ! TeX capacity exceeded, sorry [input stack size=10000]. \doregisterparameter #1#2->\ifcsname #1 :#2\endcsname #1:#2\else \expandafter... \doregisterparentparameter ...erparameter {#1}{#2} \fi \doregisterparameter ...:\s!parent \endcsname {#2} \fi \doregisterparentparameter ...erparameter {#1}{#2} \fi \doregisterparameter ...:\s!parent \endcsname {#2} \fi \doregisterparentparameter ...erparameter {#1}{#2} \fi ... l.135 \StopChapter No idea where this is originating so I can't provide a minimal at this point. -- Kip Warner -- Software Engineer OpenPGP encrypted/signed mail preferred http://www.thevertigo.com

1 0

Invitation to connect on LinkedIn
by Wader Chan 23 Jul '12

23 Jul '12

LinkedIn ------------ mailing, I'd like to add you to my professional network on LinkedIn. - Wader Wader Chan Student at Northwestern Polytechnic University (CN) China Confirm that you know Wader Chan: https://www.linkedin.com/e/2lo360-h4zt7srd-60/isd/7962710185/dhL9ODpt/?hs=f… -- You are receiving Invitation to Connect emails. Click to unsubscribe: http://www.linkedin.com/e/2lo360-h4zt7srd-60/Xdp5hvH81YfdIR-7WkTYzvH81XaHos… (c) 2012 LinkedIn Corporation. 2029 Stierlin Ct, Mountain View, CA 94043, USA.

1 0

issue with module name "resume"
by Martin 23 Jul '12

23 Jul '12

(apologies if this is sent twice, problem with mail) I am trying out the resume module mentioned on http://wiki.contextgarden.net/Curriculum_Vitae I saved the given code into a file "p-resume.tex" within the minimals folder (updated 20.7.2012), ran: context --generate When using it I consistently get told "module not found". If I rename it to eg. p-lebenslauf.tex, using \usemodule[lebenslauf] works as expected. I have created other modules in the same folder without problems. There is not other file with the (partial) name "resume" in the minimals folder. Is the word "resume" reserved? What is happening? Thanks! Martin example with p-resume.tex in "third" folder: \usemodule[resume] \starttext blah... \stoptext

2 1