July 2012 - ntg-context - NTG Mailing Lists

italic corrrection?
by Meer, H. van der 21 Jul '12

21 Jul '12

I cannot see the italic correction. Neither in the default not, nor in lucidaot. An explicit \/ (plain TeX material!) makes no difference. Addition of \setupitaliccorrection[always] also did not make a difference. What am I doing wrong? Hans van der Meer % italic correction \setuppapersize[A6][A6] %\setupbodyfont[lucidaot] \starttext {\it n}:{\it n}\crlf {\it n\/}:{\it n}\crlf \stoptext

2 4

report of strange(?) output depending on the location of \StartSteps ... \StopSteps
by dalyoung 21 Jul '12

21 Jul '12

Dear all, This is a small thing which is OK to be ignored. Please pardon me if it is a noise for you. I used to use \usemodule[pre60] for step by step output for presentation. Some time ago, I faced a strange pdf output. For example, I want two steps inside the second item. So, I use the following: \usemodule[pre60] ... ... Test of \tex{StartSteps}. \blank \startitemize \item first item \item second item \StartSteps \startitemize \item flush 1 \FlushStep \item flush 2 \FlushStep \stopitemize \StopSteps \item third item \stopitemize \page \starttable[|c|c|c|c|c|c|] \HL \VL \VL A \VL B \VL C \VL D \VL E \VL\FR \HL \VL \VL 2\VL 1\VL 3\VL 2\VL 2\VL\SR \HL \stoptable ... %%%%%%%%%%%% I got correct steps flush1 and flush 2, but the table after the steps was disappeared.(just white page) If I change the order of table and items, both are displayed and worked well. I have tested in many ways to know why the table disappeared after \StartStep. I found that it is neither the order of the code nor the some other settings. It is the level of the location of \StartSteps. If I put \StartSteps in the first level of itemization, there is no problem. Of course, I have to put more \FlushStep like Test of \tex{StartSteps}. \blank \StartSteps \startitemize \item first item \item second item \FlushStep \StartSteps \startitemize \item flush 1 \FlushStep \item flush 2 \FlushStep \stopitemize \StopSteps \item third item \FlushStep \stopitemize \page \starttable[|c|c|c|c|c|c|] \HL \VL \VL A \VL B \VL C \VL D \VL E \VL\FR \HL \VL \VL 2\VL 1\VL 3\VL 2\VL 2\VL\SR \HL \stoptable I report this just for information which may be already known to Hans, Wolfgang, et al. One appreciation is that \StartSteps ... \StopSteps works well with Simpleslides module nicely! Thanks and have a nice weekend. Best regards, Dalyoung

2 2

error for float in margin
by Meer, H. van der 21 Jul '12

21 Jul '12

ConTeXt ver: 2012.07.20 00:58 MKIV fmt: 2012.7.21 int: english/english This (yesterday's) version still gives an error when placing figures in the margin. Any idea when this will work again? It is called with: \startfiguretext[right][fig:hagdetail]{}{\externalfigure[hagelindetail][frame=on]} \strc_floats_caption_set_align ...s_caption_align ]} <argument> ...box {\strc_floats_caption_set_align \hsize \floatcaptionparame... \secondoftwoarguments #1#2->#2 \strc_floats_prepare_side_caption ...e_caption }}} \dostoptagged \strc_floats_set_paragraph_variant ...ide_caption \setbox \b_strc_floats_cap... \strc_floats_set_box ...ats_set_paragraph_variant \else \strc_floats_set_pag... ... l.62 ...{\externalfigure[hagelindetail][frame=on]} Hans van der Meer

2 1

external figures
by Hans Hagen 20 Jul '12

20 Jul '12

Hi, In the next beta \definexternalfigure is chained. \starttext \defineexternalfigure[test][width=2cm] \defineexternalfigure[less][test][width=3cm,background=color,backgroundcolor=green] \setupexternalfigure [less][height=.5cm] \externalfigure[cow.pdf][test] \par \externalfigure[cow.pdf][test][frame=on] \par \useexternalfigure[test][cow.pdf][width=2cm] \useexternalfigure[more][][test][background=color,backgroundcolor=blue] \externalfigure[test] \par \externalfigure[test][frame=on] \par \externalfigure[test][width=4cm,frame=on] \par \externalfigure[more] \par \externalfigure[more][width=4cm,frame=on] \par \useexternalfigure[more][][test][background=color,backgroundcolor=red] \externalfigure[more][width=4cm,frame=on] \par \externalfigure[cow.pdf][less][frame=on] \par \startpagefigure[cow]\stoppagefigure \stoptext ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

space around formula
by Meer, H. van der 20 Jul '12

20 Jul '12

The space around formula with \placeformula is a bit too large to my taste, even in the case of \setupformulae[spaceafter=small]. Because setting this to 0pt didn't make much difference, I had to resort to spaceafter=-1ex. Why is there seemingly always such a large space around the formula? Why not a much tighter boundary? Furthermore, it seems that there is no difference like above/below-displayskip and ditto displayshortskip as in Plain TeX. At least, I could not find it. Or did I miss that? I consulted the wiki, but the information is not found. Hans van der Meer

2 1

figures: side by side and/or one above the other
by d_jan 20 Jul '12

20 Jul '12

Hello, I'm using context for an document with many figures. In some cases I have figures that should appear side by side and/or one above the other – but without combining them (\startcombination... \stopcombination). This I want to avoid because I'd like to give them a plain caption (like non-combined images) and because I would not like putting not directly related figures in a combination. In addition, when placed [left], combinations somehow center all sub-captions, though for single images they are left-aligned. (see http://pastebin.com/tZiNuekZ) Here is what I tried (and what went wron on the way) A) one above the other – so that I have the images on the left side of the page, while the text is on the right. I tried to archive this using the attribute [left]. The text floats aside of the one bottom image (someimage2), but not aside the one above it (someimage1). This code produces a working example: \starttext \placefigure [left] {caption} {\externalfigure[someimage1][width=0.5\textwidth]} \placefigure [left][fig:newton] {caption} {\externalfigure[someimage2][width=0.5\textwidth]} \input tufte \stoptext B) side by side I tried to work with columns here, but i was not successful. The figures often went not together and when a setup worked, the text did not continue to flow after the images but was starting on the next page. I hope there is a more robust solution out there. I would be grateful if somebody could point me in the right direction for solving these issues. Regards, Jan

1 0

Re: [NTG-context] change caption position temporarily
by d_jan 20 Jul '12

20 Jul '12

>> Is it possible to set the caption position for some images to another position >> than the one defined in \setupcations ? >> The standard in my document is location=bottom but for some images I'd prefer >> =right. > > \setupcaptions[location=bottom] > \def\PlaceRightFigure#1#2{{\setupcaptions[location=right]% > \placefigure{#1}{#2}}} > \starttext > \placefigure{caption 1}{figure 1} > \PlaceRightFigure{caption 2}{figure 2} > \placefigure{caption 3}{figure 3} > \stoptext Sorry that I get back on this so late: thanks a lot, it works very well.

2 1

Adding command pages to the wiki
by Sietse Brouwer 20 Jul '12

20 Jul '12

Hi all, When some command is mentioned on this mailing list, and people say "somebody might want to add this information to the wiki", and the command page doesn't even *exist* yet — don't despair. Creating it is easy, now. * There's a proper copy-paste skeleton for new command pages, now; you can copy it and fill in what you need with a minimum of fuss. It lives at http://wiki.contextgarden.net/Help:Command_reference. * Help:Command_reference is now linked from the [[Category:Commands]] page, so it should be easy to find when you need it. * No more interleaving your prose with <code> and <tt> tags: {{cmd|defineparagraphs|[LeftRight]}} produces a linkified and typewriter-fonted \defineparagraphs[LeftRight]. * Link to up-to-date versions of source files with {{src|m-ipsum.mkiv}}. This links to the repository at http://repo.or.cz/w/context.git. * Mark code with {{code|...}} instead of <code>...</code>. It codes the same thing, but it's easier to type. (And easier to recode what it encodes. Code code code.) Speaking of the command reference: if you click on http://wiki.contextgarden.net/Category:Commands, you'll see that there are only 100 commands left to categorize. Some help would really be appreciated at this stage. Just open two or three commands in tabs, and change [[Category:Commands|mycommand]] to [[Category:Command/SubCategory|mycommand]]; you can see the list of subcategories at the top of the Category:Commands page. Kind regards, Sietse (Esteis on the wiki)

3 2

advice 4 math font
by Andreas Mang 20 Jul '12

20 Jul '12

Hi there, I have a rather general question regarding the options for math fonts in ConTeXt. As I understand from reading older posts to this list, there are currently efforts for making either pagella math or an updated modern font available. I am looking into this for quite some time now, but did not find a solution of my liking. I am currently using \setupbodyfont[modern-designsize] However, I like the rendering of latex's mathpazo a lot better, since in modern design the math font does not match the modern text font. Plain pagella currently is no option, since (i) fraktur is not supported (see P.S.) (ii) I am not happy with px math (integrals…) Another option would to use tex gyre pagella math (which is different from the currently available \setupbodyfong[pagella], right?!): ftp://ftp.mpi-sb.mpg.de/pub/tex/mirror/ftp.dante.de/pub/tex/fonts/tex-gyre-math/doc/presentation-tg_pagella_math.pdf As I understand I'd have to put the tff / otf files into a folder that is recognized by ConTeXt (right?!). However, downloading the zip from here: http://www.ctan.org/tex-archive/fonts/tex-gyre-math gives me only the "regular" fonts (i.e. there is no math - or am I missing something?!) Are there any other options, is there someone listening, who was able to mimic mathpazo (I know about math times, but there's money envolved, which I'd rather like to not spend) and could provide me with a solution or are there other options, which I have overseen? I have had a look at the descriptions about handling fonts in the manual(s), but I did not really get into it. I'd have to come up with a solution of my liking in a couple of months (deadline). Your help is very much appreciated. Sorry for bringing this up, especially since it is a stupid discussion about taste, but I spend too much time on this and am quite sure that someone out there must have a solution to these problems or at least point me into the right direction... Cheers, Andreas %%%%%%%% START EXAMPLE %%%%%%%% \setupbodyfont[pagella,12pt] \starttext $\mathfrak{F}$ {\frak F} \stoptext %%%%%%%% STOP EXAMPLE %%%%%%%%

1 0

Re: [NTG-context] A "Lorem ipsum" module?
by Rogers, Michael K 19 Jul '12

19 Jul '12

On 2012-07-18 Marcin Borkowski <mbork@???> wrote: > in LaTeX, there is quite a useful package called "lipsum", for > typesetting varioud amounts of "Lorem ipsum" stuff. Is there anything > like that in ConTeXt? (I know about \input knuth, \input tufte etc., > but that is not exactly what I have in mind, especially when giving a > sample of some design to a customer;).) The LaTeX lipsum seems to have been pre-download from lipsum.com<http://lipsum.com>. ConTeXt makes this relatively easy. The one problem that might be solved better is that the paragraphs come in a single xml node separated by single newlines. I defined a lines environment to make these into paragraphs, which is not as pretty as I would like. \startxmlsetups xml:Lorem:base \xmlsetsetup{Lorem}{*}{-} \xmlsetsetup{Lorem}{feed|lipsum}{xml:Lorem:*} \stopxmlsetups \xmlregisterdocumentsetup{Lorem}{xml:Lorem:base} \startxmlsetups xml:Lorem:feed \xmlflush{#1} \stopxmlsetups \startxmlsetups xml:Lorem:lipsum \xmlflush{#1} \stopxmlsetups \definelines[LoremLines] \def\Lorem#1{% #1 = number of paragraphs to request \startLoremLines \xmlprocessfile{Lorem}{http://www.lipsum.com/feed/xml?amount=#1&what=paras&start=yes}{} \stopLoremLines } \starttext \setupindenting[yes,20pt] \setuplines[LoremLines][command=\blank,indenting=yes] \Lorem{12} \stoptext ________________________________ This e-mail message (including any attachments) is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this message (including any attachments) is strictly prohibited. If you have received this message in error, please contact the sender by reply e-mail message and destroy all copies of the original message (including attachments).

7 7