June 2005 - ntg-context - NTG Mailing Lists

Headers, footers, page numbering
by Keith McKay 13 Jun '05

13 Jun '05

Dear All I have produced a nice little A5 pamphlet which I will be printing on A4 paper. I have had a lot of fun doing this and I am quite pleased that I was able to install fonts and fleurons which I needed in the process. However, I have a problem which I am having difficulty in solving. How can I stop the Header, footer and page number being printed on the first page? I have looked through the big Context manual but I can't figure it out. Any hints? Thanks Keith McKay Hamilton, Scotland -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.323 / Virus Database: 267.6.9 - Release Date: 11/06/2005

4 5

Re: [NTG-context] importing figures in metapost
by andrea valle 13 Jun '05

13 Jun '05

Thanks Mojca, (I put again the discussion on the list) > andrea valle wrote: >> Thanks a lot, >> It seems that it is exactly what I need,as I want to use pdfs. >> Actually I'm able to scale, but not to shift. > > I don't understand why not. Can you send an (non-working) example? > >> It seems to me that this: % 1 \setupcolors[state=start] \starttext \startuseMPgraphic{dummy} externalfigure "mptext.pdf" xyscaled (10cm, 8cm) shifted (3cm, 6cm); \stopuseMPgraphic \useMPgraphic{dummy} \stoptext and % 2 \setupcolors[state=start] \starttext \startuseMPgraphic{dummy} externalfigure "mptext.pdf" xyscaled (10cm, 8cm) shifted (3cm, 6cm); \stopuseMPgraphic \useMPgraphic{dummy} \stoptext ...have the same results. (these are my pdfs in output: http://www.semiotiche.it/andrea/conTest.pdf http://www.semiotiche.it/andrea/conTest1.pdf ) Where am I making a mistake? > > It is not extensively documented, it is only mentioned in metafun > manual (CTRL-F to search in Acrobat). Or, alternatively, you can take > a look at: > So, how do I know all the options I can use? Simply I can't? Best -a-

1 0

problem generating formatfiles after miktexupdate
by Wolfgang Zillig 13 Jun '05

13 Jun '05

Up to 10 minits ago I was using a (old) version of miktex. Then I started to update it. After the update I tried to generate the new format files but miktex hangs on cont-en. Any suggestions? Thanks Wolfgang Here some parts of the log: Creating "cont-en.efmt"... "pdfetex.exe" --ini --interaction=nonstopmode --halt-on-error --alias cont-en *\pdfcompresslevel=9 \pdfdecimaldigits=3 \pdfhorigin=1 true in \pdfoutput=1 \pdfpageheight=297 true mm \pdfpagewidth=210 true mm \pdfoptionpdfminorversion=4 \pdfpkresolution=600 \pdfvorigin=1 true in \input cont-en.tex \dump This is pdfeTeX, Version 3.141592-1.21a-2.2 (MiKTeX 2.4) (INITEX) entering extended mode (C:\texmf\tex\context\base\cont-en.tex (C:\texmf\tex\context\base\context.tex (C:\texmf\tex\context\base\syst-pln.tex) (C:\texmf\tex\context\base\syst-prm.tex) (C:\texmf\tex\context\base\syst-etx.tex) (C:\texmf\tex\context\base\syst-omg.tex) ........ ....... ....... (C:\texmf\tex\context\patterns\lang-cz.hyp) language : patterns cz for cz loaded (n=15,e=ec,m=ec) (C:\texmf\tex\context\patterns\lang-cz.pat) language : hyphenations cz for cz loaded (n=15,e=ec,m=ec) (C:\texmf\tex\context\patterns\lang-cz.hyp) language : patterns sk for sk loaded (n=16,e=il2,m=il2) (C:\texmf\tex\context\patterns\lang-sk.pat ! TeX capacity exceeded, sorry [pattern memory ops=2048]. l.2407 5zv4es[tcaron] No pages of output. Transcript written on cont-en.log. initexmf: pdfetex.exe failed on "cont-en.tex".

2 2

Skrinking distance between bullet and text in itemize
by Nikolai Weibull 13 Jun '05

13 Jun '05

I’d like to have the bullet appear closer to the text being itemized inside a \startitemize. I changed the symbol being used to a \cdot and now the text appears to far away from the bullet itself. Is there a way to fix this? I figured that altering distance, width, and/or factor would have some effect, but albeit it remains unchanged. The bullet also appears inmargin, if that’s important. Thanks, nikolai -- Nikolai Weibull: now available free of charge at http://bitwi.se/! Born in Chicago, IL USA; currently residing in Gothenburg, Sweden. main(){printf(&linux["\021%six\012\0"],(linux)["have"]+"fun"-97);}

3 4

practex
by Hans Hagen 11 Jun '05

11 Jun '05

Hi, I'm off to practex now for a week but will keep reading mail (with delay) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

space between rows?
by Paul Tremblay 11 Jun '05

11 Jun '05

Is there a way to put extra space bewteen rows with the standard Table module? Thanks Paul -- ************************ *Paul Tremblay * *phthenry(a)iglou.com * ************************

2 3

how to use caption with TABLE?
by Paul Tremblay 11 Jun '05

11 Jun '05

How does one use a caption with TABLE when making the table split across pages? I know how to create a multi-paged table: \bTABLE[split=repeat] % create the head \bTABLEhead \bTR \bTD State \eTD \bTD 3-year average(2001-2003) \eTD \bTD 2-year average(2001-2002) \eTD \eTR \eTABLEhead % create the body \bTABLEbody \bTR \bTD Alabama \eTD \bTD 13.3 \eTD \bTD 13.5 \eTD \eTR But not how to put a caption on each page. Preferably, the caption should be different for the first and for the rest of the pages. For the first page, it should be "Title" and for subsequent pages it should be "Title (continued)". If it is not possible to have different captions for each pages, I can still hack the code so it will work by making two different tables. Thanks Paul -- ************************ *Paul Tremblay * *phthenry(a)iglou.com * ************************

1 0

upshaped \textmu
by Peter Münster 11 Jun '05

11 Jun '05

Hello, I've just read Taco's comment on the new feature-requests-page on the wiki, and I wonder how it's done in LaTeX. Isn't there a possibility to use ec-encoding for the main-font, and for some exceptions such as \textmu another encoding? What happens with the following LaTeX-example? \documentclass{article} \usepackage[T1]{fontenc}% Does "T1" mean the same as "ec" ? \usepackage{lmodern} \usepackage{textcomp} \begin{document} Textmu: \textmu \end{document} Cheers, Peter -- http://pmrb.free.fr/contact/

3 5

\startitemize[inmargin] as "standard"
by Nikolai Weibull 10 Jun '05

10 Jun '05

Is there a way to setup itemize so that inmargin is the standard, i.e., I don't have to write [inmargin] after all my \startitemize's?, nikolai -- Nikolai Weibull: now available free of charge at http://bitwi.se/! Born in Chicago, IL USA; currently residing in Gothenburg, Sweden. main(){printf(&linux["\021%six\012\0"],(linux)["have"]+"fun"-97);}

3 3

unic-033.tex and unic-034.tex
by Nikolai Weibull 10 Jun '05

10 Jun '05

I wrote the arrow parts of vector 033 as well. Works OK. Comments welcome. I'd personally enjoy both being included in ConTeXt at some point. For some reason one needs to do the "\numexpr(x+1) \unknownchar \or ..." trick for things to work. Why?, nikolai -- Nikolai Weibull: now available free of charge at http://bitwi.se/! Born in Chicago, IL USA; currently residing in Gothenburg, Sweden. main(){printf(&linux["\021%six\012\0"],(linux)["have"]+"fun"-97);}

3 4