- ntg-context - NTG Mailing Lists

\definelabel -- location
by Herbert Voss 03 Apr '14

03 Apr '14

The documentation has an example for placing a label in the margin, but it doesn't work, it is still in the text: \definelabel[video][text=Video,location=inmargin] \starttext The label\video\ (Video 1) is not in the margin \stoptext or did I misunderstand the meaning of location? current minimal Herbert

1 0

Bug in ligature lookup
by "H. Özoguz" 03 Apr '14

03 Apr '14

Hi, used font: http://fonts.qurancomplex.gov.sa/wp-content/uploads/2012/06/UthmanTN1-Ver10… Minexample: \definefont[uthm][file:UthmanTN1Ver10*arabic at 20pt] \starttext \uthm \setupalign[r2l] ??????? \stoptext You see, that the letters are not connected, it should be look like the attached image with this ligature. In the image you see the same font and the same above unicode-text, but rendered with CorelDraw instead. So it may or may not be a font-issue, but solvable in ConText? Thanks. Huseyin

1 1

URL oddity
by Rik Kabel 03 Apr '14

03 Apr '14

Below are two MWEs. The only difference is with \setupinteraction. When the resulting link is copied from the pdf and pasted into a browser, one can see that there is a trailing / added to the interactive version, but not to the non-interactive version. For this url (and many others), that causes a 404 failure. Additional experimentation shows that a second / is not added when a trailing slash has been provided. This is not the case with TL2013. It is the case with 2014.03.28 15:04 MKIV beta. Why has the trailing slash added? Is this an intentional change? If so, is there a method to invoke the older behavior. \starttext \useURL[aurl][http://www.mieleusa.com/manuals_pdf/Residential/Ovens/H387-2_us.pdf] \from[aurl] \stoptext \setupinteraction[state=start] \starttext \useURL[aurl][http://www.mieleusa.com/manuals_pdf/Residential/Ovens/H387-2_us.pdf] \from[aurl] \stoptext -- Rik

2 1

typewriter style with Constantia
by Peter Münster 03 Apr '14

03 Apr '14

Hi, With the following setup and ConTeXt version 2014.02.14 I got typewriter style: --8<---------------cut here---------------start------------->8--- \definefontfamily[constantia][sans][Constantia] \setupbodyfont[constantia] \starttext normal and \type{mono} \stoptext --8<---------------cut here---------------end--------------->8--- But not with version 2014.03.25. What should I do to get typewriter style please? TIA for any help, -- Peter

5 4

Undefined control sequence: setupresume
by Bart Wise 02 Apr '14

02 Apr '14

I am unable to compile anything using the resume module from Wolfgang's t-letter package. I had to put a symlink from t-cor-03.tex -> t-resume.tex Here's the source: \usemodule[resume][interface=moderncv,style=classic] \starttext Hello World! \stoptext Excerpts from the log file: ConTeXt ver: 2014.01.03 00:40 MKIV current system > 'cont-new.mkiv' loaded (/home/bart/context/20140314-stable/tex/texmf-context/tex/context/base/cont-new.mkiv) system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active (/home/bart/tmp/test.tex resolvers > modules > 'resume' is loaded (/home/bart/texmf/tex/context/t-cor-03.tex loading > Context User Module / Framework for Resumes resolvers > modules > 'correspondence' is loaded (/home/bart/texmf/tex/context/third/letter/base/t-correspondence.mkiv loading > Context User Module / Correspondence ) correspondence > loading 'resume' 'interface' 'moderncv.nri' (/home/bart/texmf/tex/context/third/letter/interface/moderncv.nri colors > 'rgb' color space is supported colors > 'cmyk' color space is supported correspondence > loading 'resume' 'style' 'classic.nrs' (/home/bart/texmf/tex/context/third/letter/style/classic.nrs ! Undefined control sequence. system > tex > error on line 191 in file /home/bart/texmf/tex/context/third/letter/style/classic.nrs: Undefined control sequence ... 181 \setupresumestyle 182 [\v!nextfoot] 183 [\v!layer] 184 [\c!preset=\v!left\v!bottom, 185 \c!hoffset=\backspace, 186 \c!voffset=2cm] 187 188 %D Default style for the user information 189 190 \setupresume[\v!quote] [\c!style=\v!italic,\c!color=resume:4] 191 >> \setupresume[\v!firstname] [\c!style=\c!tf\c!d,\c!color=resume:1] I'm stumped. I'm not sure which module "setupresume" is defined, unless it's the t-resume.xml file. What am I doing wrong? Thanks, Bart

1 0

lmmath and \cong
by Elspeth McGullicuddy 02 Apr '14

02 Apr '14

Dear list, There might be something obviously wrong with the following minimal example, but it doesn't show the "\cong" symbol. \enablemode[lmmath] \starttext \math{{\cal B} \cong {\cal C}} \stoptext I use lmmath to have the same output on calligraphic characters as with latex. My context version is beta, less than a fortnight old. Regards, Chris

1 0

Re: [NTG-context] Tabulate: how to center "tabulate" horizontally?
by "H. Özoguz" 02 Apr '14

02 Apr '14

> I'm trying to center horizontally a "tabulate", but the "tabulate" is still placed on the left side of the page. > > How to center it? You could use the tabularframe and align in the middle: \defineframedcontent [tabularframe] [frame=off, align=middle] \starttext \placetable[here]{Framesolution}{ \starttabulate[|rw(1in)|rw(1in)|rw(1in)|] \HL \NC BBCCDD \NC $y_{JTSK}$ \NC $x_{JTSK}$ \NC\NR \HL[3] \NC 000000 \NC 123456.479 \NC 123456.479 \NC\NR \HL \stoptabulate } \stoptext Huseyin

2 1

Tabulate: how to center "tabulate" horizontally?
by Procházka Lukáš Ing. - Pontex s. r. o. 02 Apr '14

02 Apr '14

Hello, I'm trying to center horizontally a "tabulate", but the "tabulate" is still placed on the left side of the page. How to center it? Here is my code: ---- \starttext \startalignment[center] \dontleavehmode \externalfigure[cow] \stopalignment \startalignment[center] \dontleavehmode \starttabulate[|rw(1in)|rw(1in)|rw(1in)|] \HL \NC BBCCDD \NC $y_{JTSK}$ \NC $x_{JTSK}$ \NC\NR \HL[3] \NC 000000 \NC 123456.479 \NC 123456.479 \NC\NR \HL \stoptabulate% \stopalignment \stoptext ---- Best regards, Lukas -- Ing. Lukáš Procházka [mailto:LPr@pontex.cz] Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz] Bezová 1658 147 14 Praha 4 Tel: +420 241 096 751 Fax: +420 244 461 038

1 0

Set two symbols in relative coordinates
by "H. Özoguz" 02 Apr '14

02 Apr '14

Hi, because of some lacks of my font, I have to use some ugly font-hacks (bad, I know, but have no choice, because there is still really no good arabic font for setting quran, seems to be to hard for the world). One of these hacks is to define a new letter by setting to symbols in relative coordinates/position to each other. E.g. I have here an alif (just like a vertical line) together with a dot above it: \define\dotalif{{ا \hskip-0.2em{\arial ۟}\hskip0.2em}} with \hskip I can control the relative position horizontally. How to control the vertical position, without effecting or switching the line - like \vskip would do. Is there a method to bring it in position (relatively, using em as unit), without affecting the normal text? Maybe as overlay or something like that? Thanks. Huseyin

1 0

Bug? Missing items in nested columnar layout
by Thangalin 01 Apr '14

01 Apr '14

Hi, \setuphead[subsection][after={\blank[small]},] \starttext \startcolumns \startmixedcolumns[balance=yes,] \startsubsection[title=title,] \startitemgroup[][packed][before=\empty] \dorecurse{10}{\startitem item \#\recurselevel{}.\stopitem} \stopitemgroup \stopsubsection \stopmixedcolumns \stopcolumns \stoptext Items 1 - 3 are missing -- they should be on the left column. $ context --version mtx-context | current version: 2014.01.03 00:40 Any suggestions for how to fix this?

1 0