- ntg-context - NTG Mailing Lists

Title and defineenumeration
by Fabrice Couvreur 02 Jan '15

02 Jan '15

Dear list, Is it possible to remove the parentheses of the title ? Best regards, Fabrice \defineframed [ACFRAME] [frame=off, width=fit, align=flushleft, location=low, background=color, backgroundcolor=lightgray] \defineenumeration [ac] [text={Activité}, headstyle={\bf\feature[+][f:smallcaps]}, headcommand=\ACFRAME, numberconversionset=ACCONVERSION, width=fit, alternative=top, title=yes, ] \defineprocessor[ACPROCESSOR][color=red,command=\groupedcommand{}{.}] \defineconversionset[ACCONVERSION][][ACPROCESSOR->n] \starttext \startac{En Bretagne, il fait beau\unknown plusieurs fois par jour !} \stopac \stoptext

3 2

how to (re)set section numbers
by j. van den hoff 01 Jan '15

01 Jan '15

I have followed the recommendations how to include unnumbered sections in the table-of-content along the lines \setuphead[subject] [incrementnumber=yes,number=no] etc. this works OK if the unnumbered sections are at the end of the document. otherwise the enumeration of the actually (visibly) numbered sections is messed up (i.e. if a `subject' section goes, e.g. _before_ all actually enumerated sections, there counters are off by one). question: what is the best way of (re)setting the section counters? i.e. if the doucment structure is, e.g., \subject \section \subsection \section \subject I'd like to end up with the ToC containing entries for all subjects and sections but the numbered sections should occur (in ToC and document) as 1, 1.1, 2 rather than 2 2.1, 3 (in this example). I was not able to find a solution in the documenation/wiki. thx, joerg -- Using Opera's revolutionary email client: http://www.opera.com/mail/

2 5

Re: [NTG-context] Using Euler with simplefonts
by John Kitzmiller 01 Jan '15

01 Jan '15

On Jan 1, 2015, at 6:00 AM, Kumar Appaiah wrote: > I am trying to use the simplefonts approach to get Euler for math, > along with TeX Gyre fonts for text. Here is setup magic from Hans and Aditya from August 2013: \usetypescriptfile[euler] \starttypescript[myfamily] \definetypeface[myfamily][rm][serif][pagella][default] \definetypeface[myfamily][ss][sans] [dejavu][default] \definetypeface[myfamily][tt][mono] [inconsolata][default] \definetypeface[myfamily][mm][math] [pagellaovereuler][default] \stoptypescript \usetypescript[myfamily] \setupbodyfont[myfamily] \appendtoks \rm \to \everymathematics \setupmathematics [lcgreek=normal, ucgreek=normal] One can change the families, e.g. schola for pagella, etc., but I think the last [pagellaovereuler] and the rest has to stay.

4 4

Using Euler with simplefonts
by Kumar Appaiah 01 Jan '15

01 Jan '15

Hi. I am trying to use the simplefonts approach to get Euler for math, along with TeX Gyre fonts for text. I've looked at some of the past list archives and I haven't yet been able to figure this out. I use TeXLive, and my context is 2014.05.21.20140528-1 (Debian version). Here is the font blurb: \definefontfamily [myfamily] [serif] [Linux Libertine O] \definefontfamily [myfamily] [math] [Tex Gyre Schola Math] Now, I have tried changing the "TeX Gyre Schola Math" to Neo Euler, Euler and some other variants, but it doesn't work. I do have the Euler VM fonts installed on my system. I have also tried the example program given in http://www.ntg.nl/maps/32/06.pdf \definetypeface[eulermath][mm][math][euler][euler][rscale=1] \setupbodyfont [eulermath] \starttext \showmathcharacters \stoptext This works with texexec, but with context, it chokes. Could you please provide me some pointers? Thanks. Kumar

1 0

\mathcases and equation numbering
by j. van den hoff 31 Dec '14

31 Dec '14

I posted a similar question a few days ago without success/response but since I have not found a solution anywhere I would like to ask this again: how can I get properly enumerated equations using `\mathcases'? this example does not work: \starttext bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla \placeformula \startformula E(f) = \frac {K_1(f)} {f} \stopformula \placeformula \startformula K_1 \rightarrow \startmathcases \NC f \NC for $f \ll PS$ (flow limited transport) \NR \NC PS \NC for $f \gg PS$ (diffusion limited transport) \NR[+] \stopmathcases \stopformula bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla \stoptext since (as I now have "discovered" myself) the `\NR[+]' is here intended for subcases enumeration (which are, thus not aligned with the right margin0, rather than (like with \mathalign) for whole equation numbering. but omitting the `[+]' does not help either since \placeformula simply does not put an equation number at all. so, simple question: how to get a properly numbered equation using \mathcases? thx,joerg

1 0

luatex files
by Akira Kakuto 31 Dec '14

31 Dec '14

Dear Idris Samawi Hamid, > What is the minimum set of files are needed to update luatex? They are luajittex.dll, and luatex.dll. Best, Akira

2 1

\Context seems to be broken
by Idris Samawi Hamid ادريس سماوي ح امد 31 Dec '14

31 Dec '14

Dear gang, ConTeXt ver: 2014.12.30 09:48 MKIV beta This is LuaTeX, Version beta-0.79.2 (TeX Live 2014/W32TeX) The following gives a very strange result: \starttext \Context \stoptext See attached, there is a spurious '.8', and the rest of the definition seems to have changed as well. Please advise! Best wishes Idris -- Idris Samawi Hamid Professor of Philosophy Colorado State University Fort Collins, CO 80523

2 2

PSTricks in Context
by context context 31 Dec '14

31 Dec '14

Could someone tell me how to install and use PSTricks in Context Many Thanks Jeroen

6 14

g parameter in tabulate stopped working
by Henning Hraban Ramm 31 Dec '14

31 Dec '14

Hi & a happy new year! When preparing my last invoices for 2014, I stumpled upon an error in tabulation: \starttext \setuptabulate[distance=0pt] \starttabulate[|lw(7.75cm)|rg(,)w(2cm)|rg(,)w(2cm)|cg(,)w(3cm)|] \NC Text \NC 1,00\NC 222,22\NC 3,33\NC\NR \NC Text \NC 2\NC 5,5\NC 66,666\NC\NR \NC Text \NC 100,00\NC 44,44\NC 33,33\NC\NR \stoptabulate \stoptext In the log I get 3 times (i.e. once per g parameter): tabulate > unknown preamble key: ) and of course the numbers are not aligned around the comma. The minimal example runs through, though; my invoice does not, and I didn’t find the real cause yet... Greetlings, Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer)

2 1

Footnote breaks tagging
by Christoph Reller 31 Dec '14

31 Dec '14

Hi, ConTeXt mkiv is the only TeX-based typesetting system that can produce tagged PDFs and this is a really useful feature. Unfortunately, footnotes seem to upset tagging. MWE: \setuptagging[state=start] \starttext Text\footnote{Note} \stoptext In the resulting PDF, the structure tree seems okay to me, but the content stream is defect: 0 g 0 G BT /F1 11.955168 Tf 1 0 0 1 280.5345 760.6422 Tm [<00520067>]TJ ET /document <</MCID 0>>BDC BT /F1 11.955168 Tf 1 0 0 1 70.867 702.3845 Tm [<0068>82<003200740069>]TJ ET EMC BT /F6 7.970112 Tf 1 0 0 1 94.2752 706.0772 Tm [<0052>]TJ ET EMC q 1 0 0 1 70.867 131.9542 cm []0 d 0 J 0.3985 w 0 0 m 85.0373 0 l S Q /descriptiontag <</MCID 2>>BDC 0 g 0 G EMC BT /F6 7.970112 Tf 1 0 0 1 61.6535 122.7515 Tm [<0052>]TJ ET EMC /descriptioncontent <</MCID 4>>BDC BT /F5 9.96264 Tf 1 0 0 1 70.867 119.0587 Tm [<004C005100690032>]TJ ET EMC Clearly, in the content (around line 10) we miss something like /sup <</MCID 1>>BDC I hope that this is a minor issue in the processing of footnotes. I would very much appreciate if you could fix this bug. Cheers, Christoph

2 1