- ntg-context - Mailing Lists

Re: [NTG-context] \definemathcommand lowers the text
by Mikael P. Sundqvist 18 Aug '16

18 Aug '16

Den 18 aug. 2016 9:09 em skrev "Aditya Mahajan" <adityam(a)umich.edu>: > > On Wed, 17 Aug 2016, Mikael P. Sundqvist wrote: > >> Hi! >> >> look at the output of this (attached) >> >> \definemathcommand [D] [nolop] {\mfunction{D}} >> \starttext >> Compare $\D f$ with $\mfunction{D}f$. >> \stoptext >> >> In the \D, the D is lowered a bit. I think it should not be, or else I >> misuse something. If so, how should I define my own operator (I found >> this example on the wiki). > > > This is a "feature" of \mathop. > > > \definemathcommand [D] [nolop] {\mfunction{D}} > \starttext > Compare $\D f$ with $\mfunction{D}f$ and $\mathop{\mfunction{D}}f$. > \stoptext > > If the argument of \mathop is a single character, \mathop centers the glyph on the math axis (This is useful for \sum, \int, \prod, etc.). To circumvent this, use: > > \definemathcommand [D] [nolop] {\mfunction{D}\kern\zeropoint} > > Aditya > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context(a)ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ Thank you very much for the clear explanation and neat work-around, Aditya. /Mikael

1 0

\definemathcommand lowers the text
by Mikael P. Sundqvist 18 Aug '16

18 Aug '16

Hi! look at the output of this (attached) \definemathcommand [D] [nolop] {\mfunction{D}} \starttext Compare $\D f$ with $\mfunction{D}f$. \stoptext In the \D, the D is lowered a bit. I think it should not be, or else I misuse something. If so, how should I define my own operator (I found this example on the wiki). /Mikael

2 1

Re: [NTG-context] Strange problem with Blockquote
by Robert Blackstone 17 Aug '16

17 Aug '16

On 17 Aug 2016, at 02:19 , Pablo Rodriguez <oinos(a)gmx.es> wrote > > > Hi Robert, > > from what I get from your message, there is only one blockquote in the > introduction. > > How about adding the following code before \starttext? > > \startsectionblockenvironment[frontpart] > \setupinterlinespace[small] % or whichever value you want > \stopsectionblockenvironment > > I think it might work. I hope it helps, > > Pablo Hi Pablo, Thanks for your suggestion. I did try to insert this code where I thought I might help, though must admit that I'm not sure what to do with the argument [frontpart]. In my projectfiles, admittedly rather a mess, there is nothing with the name frontpart. Anyway, with or without this or some other possibly more appropriate argument, nothing changed the behaviour of this, or rather a blockquote in this first chapter, not even surrounding the blockquote itself with \setupinterlinespace[small] ... \setupinterlinespace[reset], as I wrote in my original post. But, while I was writing this reply it occurred to me that maybe there might be some local variant for \setupinterlinespace[small] and, yes, I found \setuplocalinterlinespace[line=4ex] on the ConTeXt wiki and this does the trick. (with [line-3ex]). So you did help me, though maybe not in the way you intended ;-) Thanks again, Best regards, Robert

2 1

Fonts in same directory.-
by Freddy Omar López Quintero 17 Aug '16

17 Aug '16

Hello! Today I was working perfectly but after an OS update, I started to have some problems with fonts. In particular, I use to put the font files (.ttf) in the same directory where .tex are placed, but now I'm getting this message: simplefonts > font ''avenirnext'' not found but I have not moved the font files. Could you please give some advices to solve this issue? In this link you guys can check a simple example of my compiling: https://www.dropbox.com/sh/2k327a5a2uzgvg2/AAD84XyQZqbdzg_8atVjdRg5a?dl=0 Thanks in advance! -- «...my role is to be on the bottom of things.» Donald Knuth

2 1

Strange behavior with context standalone (pgfplots)
by Fabrice Couvreur 16 Aug '16

16 Aug '16

Hello, With context in distribution TeXLive 2016,no problem but with standalone context, I get the "0.01pt" text in the left corner of the graph. Thanks Fabrice

4 6

Strange problem with Blockquote
by Robert Blackstone 16 Aug '16

16 Aug '16

Dear all, I have a small but nasty problem with the book I’m (still) working on. Its 10 chapters contain many Blockquotes, and they all come out as intended except one, in the first, unnumbered, chapter “Introduction". That particular blockquote v]comes out like the others only as far as its width and its fontsize are concerned, but unlike the others it insists on keeping the same interline distance as the main text. Even that would not have been too much of a problem if it had not spoiled the layout by pushing a rather large float off the page, leaving a large gap. This particular chapter is input by means of the Frontmatter file, as is Ch1, which also contains several Blockquotes, that come out OK. When I process this chapter “Introduction" separately with the same setups the blockquote also comes out allright. When, as a test, I input that chapter again, the second time through the Bodymatter, then again it comes out allright (while the blockquote in the real Ch0 keeps its large interline distance). I have tried the following: - add the setup for the blockquote to the Frontmatter file - add the setup for the blockquote also to the Ch0 file itself - add \setupinterlinespace[small] in the text just before the blockquote and \setupinterlinespace[reset] after it. None of this has changed the interline distance of the blockquote one bit. Is there anybody on this list for whom this problem is or sounds familiar and who knows a remedy? If not, which information would I have to give to make a diagnosis possible? (It may be evident that it is impossible to show the problem in an MWE.) Thanks in advance for any help. Best regards, Robert Blackstone

2 1

Using hyphen in math mode
by Brian R. Landy 16 Aug '16

16 Aug '16

Hi, I was wondering if there is a way to access the hyphen symbol (0x002D) while in math mode? I want to avoid the standard remapping to Unicode minus 0x2212. It would also be workable if I could select the math font without switching to math mode. The problem with an approach like \math{\text{-}} is that it switches the font back to the text font and does not use the math font. I.e, I'm trying to get the true hyphen symbol set in whatever font is currently defined for math mode. Best regards, Brian

2 1

vectors instead of embedding fonts
by Pablo Rodriguez 15 Aug '16

15 Aug '16

Dear list, is there any way to have vectors instead of fonts embedded in the following document? \startext \ConTeXt\ is awesome! \stoptext Many thanks for your help, Pablo -- http://www.ousia.tk

3 4

placelocalfootnotes breaks center alignment
by Henri Menke 15 Aug '16

15 Aug '16

Dear list, sometimes, one wants to place footnotes in a table which then appear right below the last row. Therefore ConTeXt ships the clever `\start...\stoplocalfootnotes` mechanism. Unfortunately, putting `\placelocalfootnotes` outside of the table breaks the centering of the table itself. For illustration please see the example below. How can I have my table centered while the footnotes are either left-aligned with respect to the left border of the table or left-aligned with respect to the page (whatever is easier)? Cheers, Henri --- \starttext \startplacetable [title={some table}] \startlocalfootnotes \startTABLE \NC Content\footnote{Footnote} \NC\NR \stopTABLE \placelocalfootnotes % commenting out unbreaks alignment \stoplocalfootnotes \stopplacetable \stoptext

4 6

Missing hyphentation in natural tables (was: French hyphenation issue in tablepaired boxes)
by Wolfgang Schuster 15 Aug '16

15 Aug '16

> Jean-Pierre Delange <mailto:adeimantos@free.fr> > 15. August 2016 um 15:05 > Dear List, > In order to verify the mechanism with a French document, I have set > the code sample given by Wolfgang for paired boxes with align > footnotes through French language commands. And I have substitute 2 > French texts to 'Content' (after removing previous \input tufte and > \input ward), and fill the tables titles with my own. All is fine, > except hyphenation which seems to be an issue here : see in the first > text the word 'automatiquement'. The missing hyphentation has nothing to do with floats, footnotes or paired boxes but a result of the default alignment setting for natural tables. To change the default value for the alignment you can use the align key for \setupTABLE. \mainlanguage[fr] \setcharacterspacing[frenchpunctuation] \starttext \setupTABLE[start][align=normal] %\setupTABLE[start][align=flushleft] %\setupTABLE[start][align={flushleft,broad}] \bTABLE \bTR \bTD « Dans la société présente, où le jeu de la spécialisation s’est outré automatiquement, les fonctions intellectuelles et les fonctions manuelles ne sont presque jamais attribuées aux mêmes ouvriers ; les ouvriers intellectuels délaissent presque tout le travail des mains ; les ouvriers manuels délaissent presque tout travail de l’esprit, presque tout exercice de la raison. » \eTD \eTR \eTABLE \stoptext Wolfgang

2 1