- ntg-context - Mailing Lists

Re: [NTG-context] Changing default rule thickness (globally)
by Wolfgang Schuster 28 Mar '20

28 Mar '20

Benjamin Buchmuller schrieb am 25.03.2020 um 14:47: > Thanks, perfect! > >> On 25 Mar 2020, at 14:34, Wolfgang Schuster <wolfgang.schuster.lists(a)gmail.com> wrote: >> >> Benjamin Buchmuller schrieb am 25.03.2020 um 09:27: >>> Hi! >>> I would like to change the rule thickness that is used by default in ConTeXt. However, from the command documentation (http://www.pragma-ade.nl/general/qrcs/setup-en.pdf) I see that I would need to basically change this for >>> [...] >>> (And for \setupbackgrounds for [top header text footer bottom].) I’m sure there is a more elegant way to do this. But how? >> >> You can use \setuplinewidth[<DIMENSION>] to change the default value for all (there can be lines which have a fixed value) lines. Just to be clear, the \setuplinewidth command sets only the value of the \linewidth register and not the rulethickness value itself. Most setups apply to the \linewidth value to rulethickness and this is why \setuplinewidth affects all commands which do this. \starttext \starttabulate[|r|l|][EQ={=}] \BC \tex{setuplinewidth[...]} \BC \tex{linewidth} \NC\NR \NC small \EQ \setuplinewidth[small] \the\linewidth \NC\NR \NC medium (default) \EQ \setuplinewidth[medium] \the\linewidth \NC\NR \NC big \EQ \setuplinewidth[big] \the\linewidth \NC\NR \NC 2pt \EQ \setuplinewidth[2pt] \the\linewidth \NC\NR \stoptabulate \stoptext Wolfgang

1 0

\setupinteraction v commas
by Tomas Hala 28 Mar '20

28 Mar '20

Hi all, I used the following MWE for creating the metainformation in PDF: \setupinteraction [title={a, b, c}, subtitle={a, b, c}, author={a, b, c}, keyword={a, b, c}, ] \starttext blah \stoptext While the title, subtitle and author contain the text without any change, in keyword all commas has been erased. Is this the expected behaviour? If yes, how could I write command inside? Best wishes, Tomáš

4 7

startcombination place reference left of images instead below
by Christoph Hintermüller 26 Mar '20

26 Mar '20

Hi When using refernece instead of column mode in start combination: Is it possible to tell context to place the reference label left or right of the picture/table etc and not below? Or do i have to use multiple columns and put reference manually and how? Following: +----------------------------+ a) | first comination element | +----------------------------+ +----------------------------+ b) | second comination element | +----------------------------+ instead of: +----------------------------+ | first comination element | +----------------------------+ (a) +----------------------------+ | second comination element | +----------------------------+ (b) Best Xristoph

2 3

Re: [NTG-context] troubles with latin modern and mutool
by Damien Thiriet 26 Mar '20

26 Mar '20

Hi Pablo, Hi list, \filterpages made the job and saved me a lot of nerves, another ConTeXt great command! Many thanks for the tips, Damien Thiriet

1 0

\startquotation and citations
by Michael Guravage 26 Mar '20

26 Mar '20

Greetings, I would like to add a citation to a block quotation. Wolfgang proposed a solution <https://www.mail-archive.com/ntg-context@ntg.nl/msg55956.html>back in May 2011. With \star-stopquotation, the left quotation mark protrudes to the left of the text. With Wolfgang's solution, the quotation marks are aligned with the text. For consistency's sake, I need cited and non-cited quotations to appear alike. A lot has changed in the last nine years. Is there a newer way to achieve this behavior? Cheers, Michael

3 3

Distance between table rows
by Tim Steenvoorden 25 Mar '20

25 Mar '20

Hi all, Trying to make my life a bit easier to add distances between tabulate rows. Found the \TB macro on the wiki. But why does below code _not_ add extra space when using the freshly defined \SR command below. So between the _second_ and _third_ row? Some TeX expansion thing going on here? ``` \define\SR {\NC\NR\TB[halfline]} \starttabulate[|r|l|] \NC one \NC two \NC\NR \NC two \NC three \SR \NC four \NC five \NC\NR \TB[halfline] \NC five \NC six \NC\NR \stoptabulate ``` Cheers, Tim

2 2

reference a paragraph
by Alan Braslau 25 Mar '20

25 Mar '20

Hello, One creates references for structure elements as, for example, \startsubject [reference=sub:mysubject] ... \stopsubject and then can refer to these using, e.g. \on{page} [sub:subject] How might one reference a *paragraph*, for example? Parallel syntax might suggest \startparagraph [reference=p:myparagraph] but this is not implemented. Perhaps there is another referencing command that I am not aware of? Thank you Alan

2 1

Changing default rule thickness (globally)
by Benjamin Buchmuller 25 Mar '20

25 Mar '20

Hi! I would like to change the rule thickness that is used by default in ConTeXt. However, from the command documentation (http://www.pragma-ade.nl/general/qrcs/setup-en.pdf) I see that I would need to basically change this for \basegrid[rulethickness=...] \setupbar[rulethickness=...] \setupchemical[rulethickness=...] \setupeffect[rulethickness=...] \setupfillinlines[rulethickness=...] \setupfillinrules[rulethickness=...] \setupframed[rulethickness=...] \setuplinefillers[rulethickness=...] \setupmarginrules[rulethickness=...] \setupmixedcolumns[rulethickness=...] \setupnote[rulethickness=...] \setupparagraphs[rulethickness=...] \setupsidebar[rulethickness=...] \setuptables[rulethickness=...] \setuptabulation[rulethickness=...] \setuptextbackground[rulethickness=...] \setuptextrules[rulethickness=...] \setupthinrules[rulethickness=...] \setupxtable[rulethickness=...] (And for \setupbackgrounds for [top header text footer bottom].) I’m sure there is a more elegant way to do this. But how? Cheers Benjamin

2 1

How to calculate the height of text of a certain width?
by Rudolf Bahr 25 Mar '20

25 Mar '20

Hello dear All, the following MWE works best: \definelayer[LAY] \starttext \setlayerframed[LAY] [x=0pt,y=20pt] [frame=on, width=300pt, align={right,}] % tolerant}] {\input ward } \flushlayer[LAY] \stoptext Now, it could have a favourable effect on designing a page if the height of a text of certain width could be calculated in advance, depending of the font. Is there a way? As I fear, TeX's means "\setbox" woun't work with aligned texts. Best wishes, remain healthy, Rudolf

3 9

Re: [NTG-context] startcombination place reference left of images instead below
by Christoph Hintermüller 24 Mar '20

24 Mar '20

Hi Wolfgang On Mon, 2020-03-23 at 17:56 +0100, Wolfgang Schuster wrote: > > > Did my first tabulate/itemize example work for you? > > I have no problem including your graphic in a table although the > size > isn't perfect. > > \starttext > > \startplacetable[title={some caption},reference={fig:somefig}] > \startitemize[a][stopper=)] > \starttabulate > \NI \startMPcode input heap ; \stopMPcode \NC\NR > \stoptabulate > \stopitemize > \stopplacetable > > \stoptext > > Without the actual error message it's hard to tell what's wrong but > I > guess your installation doesn't know the \NI command for tabulate. > > The best would be to update your three year old ConTeXt version. > I finally managed to update to 2018 for JonathanF ubuntu ppa the most recent texlive packages are broken in terms of context missing dependencies and dlls. The wiki tells that \NI should be available since fall 2017 but seems as if in texlive 2018 still not incorporated but wiki ( https://wiki.contextgarden.net/Tabulate) also talks about undocumented \itemtag and that works for my installation. \starttext \startplacetable[title={some caption},reference={fig:somefig}] \startitemize[a][stopper=)] \starttabulate \NC \itemttag \NC \startMPcode input heap ; \stopMPcode \NC\NR \stoptabulate \stopitemize \stopplacetable \stoptext Thanks again Xristoph -- -- Christoph Hintermüller Dipl.-Ing. Dr. MBA. MSc JKU Institute of Biomedical Mechatronics Altenberger Straße 69, 4040 Linz, Austria, Cell: +43 650 8827347 Tel. +43 732 2468 4813 Email: christoph.hintermueller(a)jku.at

1 0