- ntg-context - Mailing Lists

Re: [NTG-context] how to define a new math symbol
by M.J. Kallen 25 Oct '06

25 Oct '06

Great, it works! Running "texexec --pdf test-prodint" worked immediately, but "xdvi test-prodint.dvi" gave me an error relating to mktexpk not being able to create a bitmap font. Solved this problem by running "updmap --enable Map prodint.map". I don't think I could have done this myself, as I do not understand some of the steps in your solution. Thank you very much! Maarten-Jan ----- Original Message ---- From: Taco Hoekwater <taco(a)elvenkind.com> To: mailing list for ConTeXt users <ntg-context(a)ntg.nl> Sent: Wednesday, October 25, 2006 10:40:10 AM Subject: Re: [NTG-context] how to define a new math symbol M.J. Kallen wrote: > Taco, > > > I'm not sure I understand your question. I'm using TexLive on a linux > system. I do not use any other fonts other than CM. That last bit of information is crucial, because there is a difference between font handling between CM/Lm and commercial fonts. I've been skyping with Hans and he came up with the code below. You can use the font files from the LaTeX zip, you just have to make sure that pdftex can find the (map) file, of course. Cheers, taco % test-prodint.tex \definefontsynonym [MathGamma] [prodint] \definefamilysynonym [default] [xop] [mc] \startmathcollection [default] \definemathsymbol [prodi] [op] [xop] [80] %80 prodinttext \definemathsymbol [Prodi] [op] [xop] [82] %82 prodintdisplay \definemathsymbol [PRODI] [op] [xop] [84] %84 prodintbig \stopmathcollection \loadmapfile[prodint] \starttypescript [math] [modern,computer-modern,latin-modern,ams] [size] \definebodyfont [17.3pt,14.4pt,12pt,11pt,10pt,9pt,8pt,7pt,6pt,5pt,4pt] [mm] [mc=prodint] \stoptypescript \definetypeface [modern] [mm] [math] [modern] [computer-modern][encoding=default] \setupbodyfont[reset,modern,10pt] \enablemathcollection[prodint] \starttext $\prodi$ \stoptext _______________________________________________ ntg-context mailing list ntg-context(a)ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context

1 0

doubleminus verbatim
by Wolfgang Werners-Lucchini 25 Oct '06

25 Oct '06

Hallo! \type{--mode} results in '-mode' (one minus eaten). Wolfgang

2 1

Re: [NTG-context] how to define a new math symbol
by M.J. Kallen 25 Oct '06

25 Oct '06

Taco, I'm not sure I understand your question. I'm using TexLive on a linux system. I do not use any other fonts other than CM. The file prodint.afm has the following contents: StartFontMetrics 4.0 Comment This is prodint.afm created from prodint.pfb by t1lib V. 1.0.0. Comment File creation date: Thu Mar 8 00:02:51 2001 Comment t1lib is copyright (c) Rainer Menzner, 1996, 1997, 1998. Comment t1lib is distributed under the GNU General Public Library License (LGPL) FontName prodint FullName prodint FamilyName prodint Weight Plain ItalicAngle 0 IsFixedPitch false FontBBox 0 -53 2581 2298 UnderlinePosition 0 UnderlineThickness 0 Version 000.001 Notice 2001, JC Loredo-Osti. Based in R. Gill's `pi.ps'. Right to use, copy, distribute and modify this file is granted. EncodingScheme FontSpecific StdHW 47 StdVW 47 StartCharMetrics 7 C 80 ; WX 785 ; N prodinttext ; B 0 0 713 999 ; C 82 ; WX 1255 ; N prodintdisplay ; B 0 0 1141 1599 ; C 84 ; WX 1804 ; N prodintbig ; B 0 0 1640 2298 ; C 120 ; WX 1205 ; N oldpitext ; B 13 -33 1237 966 ; C 122 ; WX 1928 ; N oldpidisplay ; B 23 -53 1982 1547 ; C 160 ; WX 1637 ; N ancientpitext ; B 50 -27 1611 974 ; C 162 ; WX 2619 ; N ancientpidisplay ; B 81 -40 2581 1561 ; EndCharMetrics EndFontMetrics End of file prodint.afm So based on some of the symb-xxx.tex files, I tried \loadmapfile[prodint.map] \definefontsynonym [Prodint] [prodint] \def\ProdintSymbol#1{\getglyph{Prodint}{\char#1}} \startsymbolset \definesymbol[prodi] [\ProdintSymbol{80}] \definesymbol[Prodi] [\ProdintSymbol{82}] \definesymbol[PRODI] [\ProdintSymbol{84}] \stopsymbolset but texexec stops when mktexfm cannot find the file 'prodint' or it says the TFM file is missing. Another problem with this approach is the fact that this does not define a MATH symbol, which is really what I would want. Based on the LaTeX style file prodint.sty, I'm guessing I'll at least need a command like: \definemathsymbol [prodi] [op] [prodint] ["xx] but I can't figure out the usage of this command. I also suspect that I can not used the prodint.tfm file, supplied with the LaTeX package, but need to run Texfont to create one for ConTeXt. Can you confirm this? I greatly appreciate any help! Maarten-Jan ----- Original Message ---- From: Taco Hoekwater <taco(a)elvenkind.com> To: mailing list for ConTeXt users <ntg-context(a)ntg.nl> Sent: Tuesday, October 24, 2006 5:31:10 PM Subject: Re: [NTG-context] how to define a new math symbol MJK wrote: > Hi, > > I would like to use of the product integral (a curly \prod-like > symbol which is to \prod what \int is to \sum) in Context. There is a > LaTeX package (not official) available from Richard Gill's website > (http://www.math.uu.nl/people/gill/, all the way at the bottom), > which supplies a .sty file with the following contents: What font setup do you use in ConTeXt? Taco _______________________________________________ ntg-context mailing list ntg-context(a)ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context

2 1

Hardcoded options in the Ruby scripts
by Richard Gabriel 25 Oct '06

25 Oct '06

Hello Hans, I'm still wondering why there are certain formats hardcoded in your scripts and how the "make all formats" feature does (not work). See scripts/ruby/base/tex.rb: Lines 131-137: Here are a few languages predefined which texexec "knows". If I want to add a format for another language, I have to add a new line here. Line 339: Here are the "default" TeX formats defined. No problem to consider something as default ;-), but the point is that "texexec --make --all" actually does "make all DEFAULT formats", NOT "make all AVAILABLE formats". :-( Anyway, the main problem I see is altering of a script which comes with the ConTeXt distribution - the changes made into this scripts must be done again and again after each update. My suggestion is: 1. To put the format definition into a separate file (like user.rb or so) which won't be owerwritten in any case. [Note: cont-usr.tex is a good analogy to this] 2. "Make all" should make ALL the defined ConTeXt formats, not the default ones. Thanks, Richard

2 2

how to define a new math symbol
by MJK 24 Oct '06

24 Oct '06

Hi, I would like to use of the product integral (a curly \prod-like symbol which is to \prod what \int is to \sum) in Context. There is a LaTeX package (not official) available from Richard Gill's website (http://www.math.uu.nl/people/gill/, all the way at the bottom), which supplies a .sty file with the following contents: \ProvidesPackage{prodint} \DeclareFontFamily{U}{ProdInt}{} \DeclareFontShape{U}{ProdInt}{m}{n}{<-> prodint}{} \DeclareSymbolFont{Prodint}{U}{ProdInt}{m}{n} \DeclareMathSymbol{\prodi}{\mathop}{Prodint}{80} %80 prodinttext \DeclareMathSymbol{\Prodi}{\mathop}{Prodint}{82} %82 prodintdisplay \DeclareMathSymbol{\PRODI}{\mathop}{Prodint}{84} %84 prodintbig \endinput It also supplies a bunch of fontfiles, i.e. prodint.{afm,pfa,pfb,tfm}, and a map file prodint.map. As you can see, the package supplies three commands: \prodi, \Prodi and \PRODI, corresponding to three sizes. My question(s): how can I define similar commands (I'm guessing \definemathsymbol would be required) to use this symbol in Context? Is it possible to use the fontfiles supplied in the LaTeX package or should Texfont be used to enable the symbol in Context? Thanks, Maarten-Jan

2 1

resource libraries
by Wolfgang Werners-Lucchini 23 Oct '06

23 Oct '06

Hallo! Is it possible somehow to extract all the images covered in an image database without lose of quality? Wolfgang Werners-Lucchini

2 1

Updating on Windows
by Jeff Smith 23 Oct '06

23 Oct '06

Hello all! Quick question here because the Wiki is silent on this. When I want to (manually) update my ConTeXt windows (stand-alone) installation, do I only need the following two files: cont-tmf.zip cont-win.zip Or is there more? I know ScITE is supposed to have an "Update ConTeXT" option but I don't use this editor anymore. I found a nifty one called PSPad with a better interface (in my opinion -- and it also supports Unicode, so yay!) and it supports TeX very well. I had a lot of fun using its integrated Lorem ipsum generator when testing stuff. :-) Jeff

2 2

Problems with MetaFun and registers
by Fredrik Sjunnesson 23 Oct '06

23 Oct '06

I have problems with the register macro in MetaFun. When I try ====================================================================== \setupcolors [state=start] \starttext \definelayer [test] \startuseMPgraphic{oeps} path p ; p := fullcircle scaled 6cm ; fill p withcolor .8white ; draw p withpen pencircle scaled 1mm withcolor .625red ; register ("somepos-1",0cm,0cm,center currentpicture) ; \stopuseMPgraphic \setMPlayer [test] [somepos-1] [location=c] {Does it work all right?} \getMPlayer [test]{\useMPgraphic{oeps}} \stoptext ====================================================================== (which is essentially copied from the manual) in ConTeXt live I get the following error message ====================================================================== ! Illegal unit of measure (pt inserted). <to be read again> - \pospxywhd ...fnum \positionanchormode =\plusone - \MPx \pageanchor \fi \rela... l.7 ...hd{somepos-1}{0}{5687206}{5687206}{0}{0}{0} ? ! Emergency stop. <to be read again> - \pospxywhd ...fnum \positionanchormode =\plusone - \MPx \pageanchor \fi \rela... l.7 ...hd{somepos-1}{0}{5687206}{5687206}{0}{0}{0} No pages of output. ====================================================================== Am I doing something wrong or is the register functionality broken in ConTeXt 2006.10.13? /Fredrik -------------------------------- Teknisk projektledare Ph.D. Complex Systems AcobiaFLUX AB fredrik.sjunnesson(a)acobiaflux.se Tel: +46 (0) 31 722 48 11 Fax: +46 (0) 31 722 48 01 Mob: +46 (0) 733 27 92 41 www.acobiaflux.se

1 0

German hyphenation broken ?
by Steffen Wolfrum 23 Oct '06

23 Oct '06

Hi, could someone please have a look at the minimal example below: On my system it seems that the old germ hyphenation doesn't work anymore. Line 7 and line 9 are for sure hyphenated according to the new rules "Einbu-ßen" and "Sy-stem" Do others experience the same or is only my installation broken? Steffen (pdfeTeX, Version 3.141592-1.30.4-2.2, ConTeXt ver: 2006.10.13 20:06) \usetypescript[postscript][\defaultencoding] \setupencoding[default=texnansi] \mainlanguage[deo] \enableregime[mac] \newdimen\Vertikal \Vertikal=12pt \setupbodyfont[postscript,10pt] \setupinterlinespace[line=12pt] \definepapersize[Test][width=15.7cm,height=23.2cm] \setuppapersize[Test][A4] \setuplayout [width=113mm,height=48\Vertikal, backspace=20mm,topspace=15mm, header=\Vertikal,headerdistance=0.5\Vertikal, footer=3\Vertikal,footerdistance=0pt, location=middle,marking=on,grid=no] \starttext \quad \index{Rentenversicherung&– Zukunft der \~}Im Hinblick auf den Umbau von Sozialversicherungssystemen hat das Bundesverfassungsgericht allerdings einem künftigen Reformgesetzgeber insoweit das Feld bereitet, als es angemerkt hat, daß das westdeutsche (nunmehr gesamtdeutsche) gesetzliche Rentenversicherungssystem von der Möglichkeit einer Umgestaltung nicht so ausgenommen ist\footnote{Test}. Diese Tatsache ist nicht neu; die bisher vorhandene Finanzkraft der Sozialversicherung hat die Frage nur nicht aktuell werden lassen. Selbst wenn also ein tiefgreifender Umbau verbunden mit Einbußen in der Rechtssubstanz von Ansprüchen stattfinden würde, könnte man sich nur schwer auf eine Präzendenzwirkung des Urteils zur rentenrechtlichen Systementscheidung je berufen\footnote{Test}; die Akzeptanz einer entsprechenden Reform mag dadurch vielleicht steigen, da die politischen Akteure argumentieren können, so etwas ähnliches habe es schon einmal gegeben. \stoptext

2 2

paragraph with a shape
by Victoria Brown 23 Oct '06

23 Oct '06

How do I shape a paragraph like a mouth? --------------------------------- Get your email and more, right on the new Yahoo.com

2 1