- ntg-context - Mailing Lists

Natural table header limitation.
by JOHN CULLETON 25 Feb '07

25 Feb '07

The fancy tricks one can to with Natural Tables seem to work within the body of the table where I don't need them but fail in the header area where I do need them. This example, takein from the wiki, works (of course.) \setupTABLE[row][odd][background=color,backgroundcolor=red, width=.2\textwidth] \bTABLE[split=yes] \bTR \bTD[nr=3] 1 \eTD \bTD[nc=2] 2/3 \eTD \bTD[nr=3] 4 \eTD \eTR \bTR \bTD 2 \eTD \bTD 3 \eTD \eTR \bTR \bTD 2 \eTD \bTD 3 \eTD \eTR \bTR \bTD[nc=3] 1/2/3 \eTD \bTD 4 \eTD \eTR \bTR \bTD 1 \eTD \bTD 2 \eTD \bTD 3 \eTD \bTD 4 \eTD \eTR \eTABLE But if I convert the above data items to header items the run fails. Specifically the following fails: \setupTABLE[row][odd][background=color,backgroundcolor=red, width=.2\textwidth] \bTABLE[split=yes] \bTABLEhead \bTR \bTH[nr=3] 1 \eTH \bTH[nc=2] 2/3 \eTH \bTH[nr=3] 4 \eTH \eTR \bTR \bTH 2 \eTH \bTH 3 \eTH \eTR \bTR \bTH 2 \eTH \bTH 3 \eTH \eTR \bTR \bTH[nc=3] 1/2/3 \eTH \bTH 4 \eTH \eTR \bTR \bTH 1 \eTH \bTH 2 \eTH \bTH 3 \eTH \bTH 4 \eTH \eTR \eTABlehead \eTABLE -------------------------------------------------------------------------------- What did I miss? Here is the error message: bTR \bTH [nr=3] 1 \eTH \bTH [nc=2] 2/3 \eTH \bTH [nr=3] 4 \eTH \eTR \ETC. ! File ended while scanning use of \doTABLEhead. <inserted text> \par <*> tabletest.tex emergencyend ? ----------------------------------------------------------------------------- -- John Culleton _________________________________________________________________ Need personalized email and website? Look no further. It's easy with Doteasy $0 Web Hosting! Learn more at www.doteasy.com

2 1

Question about defining a math macro
by Aditya Mahajan 24 Feb '07

24 Feb '07

Hi, Can I define a math macro, say \EXP that does the following: 1) \EXP{something} gives me, say E(something) 2) \EXP_a^b{something} gives my E_a^b(something) That is, I want to write a macro that will only be used in the math mode, that does something with its argument. But, I also want it to handle _ and ^ if they are present. The only method that I can think of is to check _ or ^ with \ifnextcharacter and go through all 5 cases (nothing, only _, only ^, _ followed by ^, ^ followed by _) but this seems very inefficient. Is there a better way? Aditya

3 4

breaking framed text across pages
by Vyatcheslav Yatskovsky 24 Feb '07

24 Feb '07

Hi, I'm struggling against framed text and is beaten again. If the text below doesn't fit the page, it goes below footer and stops pdf file without explanations. After many experiments I should note that frame text is not user-tolerant construction at all, unlike the whole Context is. :( \defineframedtext[assignment][rulethickness=0.7pt, corner=round, bodyfont=11pt, width=\textwidth] \startassignment Write an M-file which inputs matrixes $A$, $B$, initial $N$ and number of iterations, and which plots 3D bars. \startcolumns[n=3] \par\thinrule \par\thinrule \par\thinrule \par\thinrule \par\thinrule \par\thinrule \par\thinrule \par\thinrule \par\thinrule \par\thinrule \stopcolumns Find relative distribution (in percents) of population within age classes and store the result into new matrix $P$. Plot it too. \startcolumns[n=3] \par\thinrule \par\thinrule \par\thinrule \par\thinrule \par\thinrule \par\thinrule \par\thinrule \stopcolumns \stopassignment Best, Vyatcheslav

4 3

ConTeXt release 2007.02.20
by geoff.moyle＠gmail.com 24 Feb '07

24 Feb '07

Gday I am having a problem on mswincontext since this the update 2007.02.20. Even "hello world" will not compile. I am assuming the problem is the 7pt font. What do I need to do to correct the problem? Thanks texmfstart texexec --autopdf --pdf test.tex TeXExec | processing document 'test.tex' TeXExec | no ctx file found TeXExec | tex processing method: context TeXExec | TeX run 1 TeXExec | writing option file test.top TeXExec | using randomseed 840 TeXExec | tex engine: pdftex TeXExec | tex format: cont-en This is pdfTeX, Version 3.141592-1.40.1 (Web2C 7.5.6) \write18 enabled. (c:/CONTEX~1/usr/local/context/tex/texmf-mswin/web2c/natural.tcx) entering extended mode (./test.tex ConTeXt ver: 2007.02.20 12:00 MKII fmt: 2007.2.24 int: english/english language : language en is active system : cont-new loaded (c:/CONTEX~1/usr/local/context/tex/texmf-local/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex (c:/CONTEX~1/usr/local/context/tex/texmf-local/tex/context/base/cont- new.mkii)) system : cont-old loaded (c:/CONTEX~1/usr/local/context/tex/texmf-local/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (c:/CONTEX~1/usr/local/context/tex/texmf-local/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (c:/CONTEX~1/usr/local/context/tex/texmf-local/tex/context/user/cont-sys.tex ) bodyfont : 12pt rm is loaded ! Font \*7ptmmmrrm*=rm-lmr7 not loadable: Metric (TFM) file not found. <to be read again> \relax \xxdododefinefont ...tspec {#4}\newfontidentifier \let \localrelativefontsiz... \dodosetmathfamilyA ...amily \fontsize \endcsname \else \ifcsname \fontbody ... \dosetmathfamily ...athfamily \scriptscriptfont #1 \let \fontbody #3\dodosetm... <inserted text> ...ptscriptface \c!mr \mrfallback \dosetmathfamily \mifam \t... \synchronizemath ...athfonts \the \mathstrategies \fi ... l.1 \starttext ? regards Geoff

3 3

Math Sets (ConTeXt port of braket.sty)
by Aditya Mahajan 24 Feb '07

24 Feb '07

Hi, I find myself writing a lot of probability expressions where I want the delimiters to scale automatically, and | (conditional sign) to scale automatically, and the spacing around | to be correct. In LaTeX, I used to use braket package to do this. Since moving to ConTeXt, I was doing this by hand, but wring a lot of \EXP\left\{ ... \,\middle\, ...\right\} and \Pr( ... \mid ...) soon became a pain to read and write. So (thanks to Taco's first hand knowledge of why TeX is Turing complete), I have written the following macros: \unprotect \definesystemvariable {ms} % Math Set \def\mathsetmiddle{\,\middle\mathsetparameter\c!middle\,} \let\currentmathset\empty \def\mathsetparameter#1% {\executeifdefined{\??ms\currentmathset#1}{\executeifdefined{\??ms#1}\empty}} \def\definemathset {\dodoubleargument\dodefinemathset} \def\dodefinemathset[#1][#2]% {\getparameters[\??ms#1] [\c!text=,\c!left={\{},\c!right={\}},\c!middle=\vert,#2] \setvalue{#1}{\dododefinemathset[#1]}} \def\dododefinemathset[#1]#2#% {\begingroup \def\currentmathset{#1} \mathcode`\|32768 \let|\mathsetmiddle \def\mathsetarguments{#2} \dodododefinemathset} \def\dodododefinemathset#1% {\doifsomething{\mathsetparameter\c!text} {\mathop{\mathsetparameter\c!text\mathsetarguments}} \left\mathsetparameter\c!left#1\right\mathsetparameter\c!right \endgroup} \protect which allows me to do \definemathset[EXP][text={\mfunction{E}}] \definemathset[PR][text={\mfunction{Pr}},left=(,right=)] \starttext Correct spacing around the vertical bar. \startformula \EXP{f(X) | Y} = \sum_{x} f(x) \PR{x|Y} \stopformula Correct scaling of delimiters (as correct as left and right give you) \startformula \EXP{\sum_z f(X,z) | Y} = \sum_{x,z} f(x,z) \PR{x,z|Y} \stopformula Correct handling of sub|/|super scripts \startformula \EXP_X{f(X) | Y} = \sum_{x} f(x) \PR{x|Y} \stopformula Is there anyone else interested in this kind of stuff? I have not ported all the features of braket.sty, but only those that I needed. Other should not be too difficult to port. Hans and Taco: Does it make sense to add these to the core? If so, I can polish the macros a bit (add a \setupmathsets command). Aditya

1 0

Yet another math symbol
by Oliver Buerschaper 24 Feb '07

24 Feb '07

Hi all, I'm struggling to typeset the math symbol "identity" ... it looks like a "1" but with double vertical lines. Hints very welcome ;-) What if we put together an extensive table of all math symbols available in ConTeXt at some point? Oliver

5 8

OpenType font problem
by Alan Bowen 23 Feb '07

23 Feb '07

A file that compiled properly last November now fails at the very end of processing with the error message [11.11] [12.12] [13.13] systems : end file Seneca_Demarcation at line 219 ){/Users/acbowen/Library/texmf/fonts/enc/dvips/greek/agr-GFSD.enc}{/ Users/acbo wen/Library/texmf/fonts/enc/dvips/gfsdidot/a_gtdpuu.enc} !pdfTeX error: pdftex (file GFSDidot.otf): cannot open OpenType font file for r eading ==> Fatal error occurred, no output PDF file produced! TeXExec | runtime: 63.736925 I have copies of GFSDidot.otf located in ~/Library/texmf/fonts/type1/gfsdidot and ~/Library/texmf/fonts/type1/greek/gfsdidot Any suggestions about how to resolve this will be gratefully received. Alan

3 3

Tracing layout in framed texts
by Idris Samawi Hamid 23 Feb '07

23 Feb '07

Dear cartel, I would like to trace a layout within a framedtexts environment. That is, I would like to setup a layout within framed texts and get the equivalent of \showframe for those framed texts. Can it be done? The following is a test file: ========================= \setupframedtexts[location=middle] \setuplayout[width=middle] \starttext \input knuth \startframedtext \showframe % does nothing here \input zapf \stopframedtext \input knuth \stoptext ========================= Best Idris -- Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523 -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

1 0

compiling complex file
by andrea valle 23 Feb '07

23 Feb '07

(I'm sorry, Hans, Taco, I' ve already sent it, always with some posting problems, so there are 2 posts to be approved by moderator: I tried to remove them but the process failed). Dear ConTeXter, I'm having some troubles in compiling a document. I'm writing a short book (a tutorial). I writing each chapter on a separate file, then I have a main file using this kind of structure \input stile ... \input 00.introduzione \page \input 01.scGrado0 \page \input 02.architettura ... Where \input is used to insert each chapter. Also, I'm using a sort of style file defining the setups, and I'm inputting it as the first line of my "main.tex" file. Some chapters contain long framed \type parts (it's a book on a programming language), filling an entire page. When I compile each chapter file, I have no problem. But I can't compile the main file. ConTeXt keeps on adding blank pages on blank pages (total is approx. 100 pages, I stopped ConTeXt at 635). I guess it could depend on framed \type but can't understand how to solve it. Here one of the most "difficult" files. By itself it compiles properly (perfectly...I like it). http://www.semiotiche.it/andrea/membrana/03.oggetti.tex Here the compiled file (it uses a lot of images and other stuff so you can't compile it): http://www.semiotiche.it/andrea/membrana/03.oggetti.pdf Here the style file: http://www.semiotiche.it/andrea/membrana/stile.tex Here the main file: http://www.semiotiche.it/andrea/membrana/main.tex Many thanks as usual -a- Andrea Valle DAMS - Facoltà di Scienze della Formazione Università degli Studi di Torino http://www.semiotiche.it/andrea andrea.valle(a)unito.it Andrea Valle DAMS - Facoltà di Scienze della Formazione Università degli Studi di Torino http://www.semiotiche.it/andrea andrea.valle(a)unito.it

3 4

[Fwd: Re: I can't find the format file `cont-nl.fmt'!]
by Hans Hagen 23 Feb '07

23 Feb '07

1 0