- ntg-context - NTG Mailing Lists

Re: [NTG-context] how to change 'figure 1.1' to '그림 1.1'
by Dalyoung Jeong 04 Dec '07

04 Dec '07

Dear all, Last september, I asked about how to change the label text of figures and of tables in my own language. At that time, Wolfgang suggested me to make lang-kor.tex like lang- chi.tex. Yesterday, I made lang-kor.tex and test it. But it is not working. I got the following error message for a simple test file. ......... ......... (/usr/local/gwTeX/texmf.pkgs/tex/context/base/sort-lan.mkii)) (./test- label.tuo ) (./test-label.tuo) systems : begin file test-label at line 3 ! Undefined control sequence. <argument> \koreanencoding \doenableencoding ...\edef \characterencoding {@#1 @}\fi \edef \nocharacteren... <to be read again> \koencodedintro \dogetupsometextprefix ...csname #2#1#3\endcsname \else \ifcsname #2#3\endcs... \labeltexts #1#2->\leftlabeltext {#1} #2\rightlabeltext {#1} \sectionblocklabel ...sectionblock \c!label }}{#2} \fi ... l.9 \section{figures} ? %%%%%%%%%%%% Would you please check what is wrong in here? I test it using XeTeX+ ConTeXt in gwTeX(mac OSX 10.5). Thank you. Best regards, Dalyoung

2 1

Examples of MathML in Context
by Maurício 04 Dec '07

04 Dec '07

Hi, I've just looked at three documents from Hans ('mmlexamp.pdf', 'mmlprime.pdf', 'mmoexamp.pdf'), and they all show nice examples of MathML and what you can accomplish using it. However, I wasn't able to find an example of how to actually insert MathML in a Context document. I imagine it's probably something like that: \starttext (...) \startMathML (...) \stopMathML (...) \stoptext Does anyone knows of an example on how to do that properly? Thanks, Maurício

2 2

Fwd: how to change 'figure 1.1' to '그림 1.1'
by Wolfgang Schuster 04 Dec '07

04 Dec '07

---------- Forwarded message ---------- From: Wolfgang Schuster <schuster.wolfgang(a)googlemail.com> Date: 04.12.2007 11:11 Subject: Re: [NTG-context] how to change 'figure 1.1' to '그림 1.1' To: Dalyoung Jeong <haksan(a)mac.com> 2007/12/4, Dalyoung Jeong <haksan(a)mac.com>: > Dear all, > > Last september, I asked about how to change the label text of figures > and of tables in my own language. > At that time, Wolfgang suggested me to make lang-kor.tex like lang- > chi.tex. > > Yesterday, I made lang-kor.tex and test it. But it is not working. > I got the following error message for a simple test file. > > ......... > ......... > (/usr/local/gwTeX/texmf.pkgs/tex/context/base/sort-lan.mkii)) (./test- > label.tuo > ) (./test-label.tuo) > systems : begin file test-label at line 3 > ! Undefined control sequence. > <argument> \koreanencoding > > \doenableencoding ...\edef \characterencoding {@#1 > @}\fi \edef > \nocharacteren... > <to be read again> > \koencodedintro > \dogetupsometextprefix ...csname #2#1#3\endcsname > \else \ifcsname > #2#3\endcs... > > \labeltexts #1#2->\leftlabeltext {#1} > #2\rightlabeltext {#1} > \sectionblocklabel ...sectionblock \c!label }}{#2} > \fi > ... > l.9 \section{figures} > > ? > %%%%%%%%%%%% > > Would you please check what is wrong in here? > I test it using XeTeX+ ConTeXt in gwTeX(mac OSX 10.5). > > Thank you. > > Best regards, > > Dalyoung Hi, it is hard to reproduce your problem, I have no fonts on my system to test it and a test file is also missing but you can try the following method. Replace \unexpanded\def\koencoding{\enableencoding[\koreanencoding]} with \unexpanded\def\koencoding{\enableencoding[cjk-uni]} You use a undefined command \koreanecnoding and this will always fail, you should also remove the commented lines at the end of the files and change the file information, subtitle should Korean and not Chinese and you should also change the date. Wolfgang

1 0

Automatic breaking of display math equations
by Aditya Mahajan 03 Dec '07

03 Dec '07

Hi, There is a new release of breqn package (http://tug.ctan.org/get/macros/latex/contrib/mh/breqn.pdf) now maintained by Morten Hoegholm. For the impatient, just look at the examples on page 12. Need to start thinking about porting this to Context, but no time right now :-( Aditya

1 0

Re: [NTG-context] Kannada
by Mojca Miklavec 03 Dec '07

03 Dec '07

Hello, Please post such questions to the list, not to me personally. ---------- Forwarded message ---------- From: gururaj <ms.gururaj(a)rediffmail.com> Date: 3 Dec 2007 16:12:42 -0000 Subject: context I couldn't configure TexnicCenter for ConTeXt. I am using SciTe instead which works fine. I have another problem. When I had Miktex installed on my machine I could use the macro package "kanlel" which gives the output in Kannada, my native language. But with ConTeXt I am unable to use the macro package. How can I make this package work with ConTeXt? %%%% I would suggest you to use XeTeX or LuaTeX for Kannada, I don't see any advantage in supporting pdfTeX to do that. You need: - the proper font - perhaps hyphenation patterns (http://www.ctan.org/tex-archive/macros/xetex/hyphenation/sanhyph/) Hans would need to add support to ConTeXt somehow, but *if and only if* you: - are ready to test (to change files and regenerate formats) - provide enough feedback (if you ask a question about TeXnicCenter and people answer it on the list, it's polite to answer that it either didn't work and what went wrong or that you managed to compile successfully) - provide enough information (what exactly doesn't work, where does it fail, what's the error message) - specify what you need (figure captions probably need to be translated into semething as well) This is a sample (which should be simplified): % engine=xetex % this ugly portion of code could be shorter, perhaps reduced to % \definetypeface[myface][rm][Xserif][Devanagari MT] % \setupbodyfont[myface] \definefontfeature[devanagari][script=deva] \starttypescript[serif][devanagari] % replace "Devanagari MT" in "name:Devanagari MT" with the font you have installed \definefontsynonym[DevanagariMTRegular] [name:Devanagari MT] [features=devanagari] \definefontsynonym[DevanagariMTBold] [name:Devanagari MT/B] [features=devanagari] \stoptypescript \starttypescript[serif][devanagari][name] \definefontsynonym[Serif] [DevanagariMTRegular] \definefontsynonym[SerifBold] [DevanagariMTBold] \definefontsynonym[SerifItalic] [Serif] \definefontsynonym[SerifBoldItalic] [SerifBold] \definefontsynonym[SerifSlanted] [Serif] \definefontsynonym[SerifBoldSlanted][SerifBold] \stoptypescript \starttypescript[devanagari] \definetypeface [devanagari] [rm] [serif] [devanagari] [default] \stoptypescript % the ugly code ends here \usetypescript[devanagari] \setupbodyfont[devanagari,15pt] \starttext % no idea what this means, but it looks non-latin at least नेपाल चार जात छत्तिस वर्णको साझा फूलवारी हो । \stoptext Mojca

1 0

Itemize starting at zero
by Zeus Gómez Marmolejo 03 Dec '07

03 Dec '07

I've searched the documentation and emails, but I didn't find the answer... It sounds really simple: How can I make the numbers in startitemize[n,...] start from 0 instead of 1? Thanks, Zeus.

2 1

selectively turn off captions
by Roger Mason 02 Dec '07

02 Dec '07

Hello, I'm making progress in using modes - thanks again for the help so far that was given in the "switching to Context" thread. I have followed Thomas Schmitz' practex article and have set up modes for presentation and manuscript. I am using external figures on most of the slides. In presentation mode there is no need for figure captions (the slide heading and my waffling will suffice). In manuscript mode I'd like to have captions to the figures. I know I can disable captions with {none} for each individual figure, but can I do this _just_ for the presentation? I have looked up \setupcaptions but there does not seem to be a "none" option that could be used for this purpose. Thanks, Roger

10 24

Default latex font
by Xavier J. B. L. 02 Dec '07

02 Dec '07

Hi, I know that Context uses Latin Modern instead of Computer Modern that use Latex. I want to know how to change it. Thank you very much, Xan.

6 7

MetaPost 1.002 announcement
by Taco Hoekwater 30 Nov '07

30 Nov '07

The MetaPost team is happy to announce a new release of MetaPost: ---------------------------------------------------------------------- MetaPost 1.002 ---------------------------------------------------------------------- The sources and a win32 package can be downloaded immediately from http://foundry.supelec.fr/projects/metapost/ The source package should compile normally on all systems that are capable of compiling a modern web2c-based TeX distribution. The win32 package is intended for texlive or a similar web2c-based installation, and has been tested only with TeXLive 2007. These executables will *not* work for miktex, sorry. Of course, we welcome any comments (either good or bad) that you may have. Simply replying to this message is fine, but see the bottom of the message for a more formal way to report bugs and feature requests. ---------------------------------------------------------------------- What is new in version 1.002: ---------------------------------------------------------------------- * Version 1.001 introduced a memory allocation error in mpto that could result in the program looping endlessly ---------------------------------------------------------------------- What is new in version 1.001: ---------------------------------------------------------------------- * The default cmyk 'black' color now uses only black, not all four ink colors (after a discussion on the mailing list). * Some issues were reported with the new turningnumber algorithm, all known problems are now fixed. * Gábor Braun discovered that mpost did not always download the font encodings into all the created output files. * Akira Kakuto and Hartmut Henkel found some small issues in mpto regarding trailing and leading whitespace. * A fix for the 'Helvetica' entries in trfonts.map was provided by Werner Lemberg, and Michail Vidiassov supplied two extra font entries for troff.map (Symbol and ZapfDingbats). Karl Berry provided the new file troff-updmap.map, to be used by the updmap tool in texlive. * Mpost now supports web2c's --output-directory option. * Any warnings about missing fonts and characters are now always written to the terminal as well as to the log. * Now that makempx is a C program, it needed a different install line in build.sh. Also, Olaf Mersmann contributed a patch to recognize 'gmake' in build.sh * Luigi Scarso found some typing errors in the web source that prevented clean weaving of the source. * Stephan Hennig fixed a number of problems in the manual (mpman.tex) and the introduction paper (mpintro.tex). He also wrote new sections on how to preview metapost graphics and on how to use metapost graphics inside other documents. On top of that, the manual is now hypertext-aware, and fixes for a whole series of small problems have been applied. ---------------------------------------------------------------------- Legal notice / license / bug reports ---------------------------------------------------------------------- MetaPost is a system for producing graphics developed by John Hobby at AT&T, based on Donald Knuth's Metafont. The MetaPost home page is http://tug.org/metapost. MetaPost and related programs are in the public domain. The MetaPost development project is currently hosted at Supelec, https://foundry.supelec.fr/projects/metapost; please report bugs and request enhancements through there if possible. Alternatively, you can reach us through the <metapost(a)tug.org> mailing list as well. Have fun! Taco Hoekwater, for the MetaPost team, November 26, 2007

3 2

TeXnicCenter
by Mojca Miklavec 30 Nov '07

30 Nov '07

Hello, Is there any TeXnicCenter user on the list? Wiki page http://wiki.contextgarden.net/Configure_TeXnicCenter_for_ConTeXt only has anonymous edits, and I have no windows here at the moment o test. I have no idea how that program works. Mojca ---------- Forwarded message ---------- Sir, I have Protext installed on my machine with WinXp as OS. I have problems in getting the output. I have tried to configure TexnicCenter for Context. But whenever I try to compile my context document, I get the error message "cannot execute the command [DocOpen("%bm.pdf")][FileOpen("%bm.pdf")]". Where have I gone wrong?

2 1