- ntg-context - Mailing Lists

02 Nov '09

Hello, thanks again for all answers regarding labelling. It has mostly worked but I am now having a particular problem with leqalignno. It turns out that the \placeformula[mylabel] works as expected but for \leqalignno This is an example: ---------------------------------- \placeformula[Pflux] \startformula \leqalignno{ f_{q}^{p}(v) &= \frac{32}{5} \nu^{10} v^{10} \left[1 + \log\left(v\right) \left(\sum_{i\geq6}^{k} \ell_{i} v^{i} \right) \right]\cr &\times P_{q}^{p} \left[\left(1 - \frac{v}{v_{\p}} \right) \sum_{i=0}^{k} {\cal{F}}_{i}^{\lf} v^{i} \right],\cr } \stopformula ---------------------------------- Then, when doing Eq.~\in[Pflux] in the text, it will produce an ?? in the resulting pdf. Any help will be appreciated. Thanks, Pau

2 1

Some math symbols fail in MetaPost in MKIV
by Andreas Schneider 02 Nov '09

02 Nov '09

Hi, as it seems, some symbols in math mode seem to fail when put inside MetaPost. In the example I tried, both "~" and "|" were causing processing errors when used inside MetaPost (I tried both btex...etex as well as \sometxt). It works fine in MKII however. The minimal example is attached to this mail. Best Regards, Andreas.

2 1

Re: [NTG-context] IncludePicture problem with adityam / simple-slides
by Glen Callaghan 02 Nov '09

02 Nov '09

Sorry Aditya, my comments on the \noexpand command weren't quite accurate. In the earlier version of simple-slides, leaving out the \noexpand working, and the header and footer information worked properly. In the new version (with the IncludePicture fix), leaving out \noexpand just results in the text "empty" appearing at 3 (of the 4) header/footer positions. Is it something to do with using variables instead of moduleparameters? .......... not that I know what they are :-) cu Glen

2 1

Re: [NTG-context] Define exercise captions
by Vyatcheslav Yatskovsky 02 Nov '09

02 Nov '09

Hello Aditya, Thanks for help again. However, the result is far from OK. [title=yes, text=Вправа, way=bysection, prefix=yes, width=broad] I use enumeration within subsubsection, namely 1.3.1. If I put prefix=yes, the first exercise is 1.3.1.1. That is, it is numbered within subsubsection, while I want to be only <SectionNumber>.<ExerciseNumber>, like 1.1, 1.2, etc. I suspected that [way=bysection] key does the job but it does nothing in this case. And another major issue is: why the text is put in the frame and is either a few centimenters wide (without width=broad) or goes out of the page (with width=broad)? I need just ordinary paragraph. >> Please, try >> >> \starttext >> \defineenumeration[exercise][title=yes, text=Вправа, way=bysection, >> width=broad] >> >> \exercise{Розрахунок кривої, яка з'єднує три точки на площині} >> \stoptext >> >> >> The "Вправа" is putted twice, next time inside some strange brackets. >> The text gets out of the page. > > Looks like a bug in mkiv. Hans, text need to be handled differently in > descriptions and enumerations. > >> How to setup so that numeration will be done by subsection (1.1, 1.2, >> etc.)? > > prefix=yes, Thanks, Vyatcheslav

2 1

ConTeXt Minimal: error pdftex on CentOS x86_64
by Vnpenguin 02 Nov '09

02 Nov '09

Hi, Just installed minimal on CentOS x86_64. The installation is ok, but when I try pdftex, there is error: > pdftex pdftex: /lib64/libc.so.6: version `GLIBC_2.7' not found (required by pdftex) > yum list installed glibc* Loaded plugins: fastestmirror, priorities Excluding Packages in global exclude list Finished Installed Packages glibc.i686 2.5-42 installed glibc.x86_64 2.5-42 installed glibc-common.x86_64 2.5-42 installed glibc-devel.x86_64 2.5-42 installed glibc-headers.x86_64 2.5-42 installed I have both glibc.i686 & glibc.x86_64 on my box. Any help for this problem ? Thanks in advance, -- http://vnoss.org

6 29

Re: [NTG-context] IncludePicture problem with adityam / simple-slides
by Glen Callaghan 02 Nov '09

02 Nov '09

Thanks for the speedy fix, Aditya - that works now. Thanks also for putting together the simple-slides module - very nice to use! By the way, in simpleslides-s-Split.tex, we found we had to remove the \noexpand command from three lines like this one: draw \sometxt[simpleslides:sometxt:left]{\noexpand\moduleparameter {simpleslides:title}{date}} With the \noexpand command left in, most of the header and footer information didn't work. thanks Glen

1 0

Re: [NTG-context] ConTeXt MKIV - vertical titles in bibliography
by dr. joel mendoza y carpio 02 Nov '09

02 Nov '09

hi! sorry if i wasn't clear enough with what i intended to put across. in the bibliography entry below, the title of the book is not italicized. by default, the apa style will italicize this instead. i tried modifying the bibl-apa.tex to contain the following but to no avail. \unprotect \setupcite [author,year] [\c!andtext={ and }, \c!otherstext={ et al.}, \c!pubsep={, }, \c!lastpubsep={ and }, \c!compress=\v!no, \c!inbetween={ }, \c!left={(}, \c!right={)}] \setupcite [authoryear] [\c!andtext={ and }, \c!otherstext={ et al.}, \c!pubsep={, }, \c!lastpubsep={ and }, \c!compress=\v!yes, \c!inbetween={ }, \c!left={(}, \c!right={)}] \setupcite [authoryears] [\c!andtext={ and }, \c!otherstext={ et al.}, \c!pubsep={, }, \c!lastpubsep={ and }, \c!compress=\v!yes, \c!inbetween={, }, \c!left={(}, \c!right={)}] \setupcite [key,serial,authornum,page,short,type,doi,url] [\c!andtext={ and }, \c!otherstext={ et al.}, \c!pubsep={, }, \c!lastpubsep={ and }, \c!compress=\v!no, \c!inbetween={ }, \c!left={[}, \c!right={]}] \setupcite [num] [\c!andtext={ and }, \c!otherstext={ et al.}, \c!pubsep={, }, \c!lastpubsep={ and }, \c!compress=\v!yes, \c!inbetween={--}, \c!left={[}, \c!right={]}] \setuppublications[% \c!sorttype=bbl, \c!criterium=cite, \c!refcommand=authoryears, \c!numbering=\v!no, \c!autohang=\v!no] \setuppublicationlist [\c!width=24pt, \c!artauthor=\invertedshortauthor, \c!editor=\invertedshortauthor, \c!author=\invertedshortauthor, \c!namesep={, }, \c!lastnamesep={ and }, \c!finalnamesep={ and }, \c!firstnamesep={, }, \c!juniorsep={ }, \c!vonsep={ }, \c!surnamesep={, }, \c!authoretallimit=6, \c!editoretallimit=6, \c!artauthoretallimit=6, \c!authoretaldisplay=6, \c!editoretaldisplay=6, \c!artauthoretaldisplay=6, \c!authoretaltext={ et al.}, \c!editoretaltext={ et al.}, \c!artauthoretaltext={ et al.}, ] \def\maybeyear#1{#1} \def\etalchar#1{#1} %D \macros{insertchapter,insertpublisher} %D Some shortcuts. % ((#1(type\ |)chapter#2)|#3) \def\insertchap#1#2#3% {\insertchapter {#1\insertbibtype{}{\ }{chapter\ }}{#2}% {#3}} % #1city, country: pubname#2 % #1country: pubname#2 % #1pubname#2 % #1city, country#2 % #3 \def\insertpublisher#1#2#3% {\insertpubname {\insertcity {#1} {\insertcountry{, }{}{}: }% {#1\insertcountry{}{: }{}}}% {#2}% {\insertcity {#1} {\insertcountry{, }{}{#2}}% {\insertcountry{#1}{#2}{#3}}}% } \def\insertorg#1#2#3% {\insertorganization {\insertcity {#1} {\insertcountry{, }{}{#2}: }% {\insertcountry{}{: }{#2}}}% {}% {\insertcity {#1} {\insertcountry{, }{}{#2}}% {\insertcountry{}{#2}{#3}}}% } \setuppublicationlayout[article]{% \insertartauthors{}{ }{\insertthekey{}{ }{}}% \insertpubyear{(}{). }{\unskip.}% \insertarttitle{\bgroup }{\egroup. }{}% \insertjournal{\bgroup }{\egroup} {\insertcrossref{In }{}{}}% \insertvolume {\bgroup , } {\egroup\insertissue{\/(}{)}{}\insertpages{, }{.}{.}} {\insertpages{, pp. }{.}{.}}% \insertnote{ }{.}{}% \insertcomment{}{.}{}% } \newif\ifeditedbook \setuppublicationlayout[book]{% \insertauthors{}{ }{\inserteditors{}{, editor% \ifnum\getvalue{editor@num}> 1 s\fi \ \global\editedbooktrue }{\insertthekey{}{. }{}}}% \insertpubyear{(}{). }{\unskip.}% \inserttitle {\bgroup }% {\/\egroup \ifeditedbook \global\editedbookfalse \insertvolume { Number~}% {\insertseries { in~\bgroup}% {\egroup. }% {\insertcrossref{ in~}{}{. }}}% {\insertseries{ }{.}{.}}% \else \insertcrossref {\insertchap{, }{}{}% \insertpages{, pages }{. }{. }% \insertvolume{Volume~}{ of~}{}% }% {}% {\insertvolume {, volume~}% {\insertseries { of~\bgroup}% {\egroup} {}} {}% \insertchap{, }{}{}% \insertpages{, pages }{.}{.}% }% \fi}% {}% \insertedition{ }{ edition}{}% \insertpublisher{ }{.}{.}% \insertpages{ }{p. }{ }% \insertnote{}{.}{}% } \setuppublicationlayout[inbook]{% \insertauthors{}{ }{\inserteditors{}{, editor% \ifnum\getvalue{editor@num}> 1 s\fi \ \global\editedbooktrue }{\insertthekey{}{. }{}}}% \insertpubyear{(}{). }{\unskip.}% \inserttitle {\bgroup }% {\/\egroup \ifeditedbook \global\editedbookfalse \insertvolume { number~}% {\insertseries { in~\bgroup}% {\egroup. }% {\insertcrossref{ in~}{}{.}}}% {\insertseries{ }{.}{}}% \else \insertcrossref {\insertchap{, }{}{}% \insertpages{, pages }{. }{. }% \insertvolume{Volume~}{ of~}{}% }% {}% {\insertvolume {, volume~}% {\insertseries { of~\bgroup}% {\egroup} {}} {}% \insertchap{, }{}{}% \insertpages{, pages }{.}{}% }% \fi}% { }% \insertedition{ }{ edition.}{}% \insertpublisher{ }{.}{.}% \insertnote{ }{.}{}% } \setuppublicationlayout[booklet]{% \insertauthors{}{ }{\insertthekey{}{. }{}}% \insertpubyear{(}{). }{}% \inserttitle{\bgroup }{\egroup \insertseries{ (}{)}{}. }{}% \insertedition{ }{ edition.}{}% \insertpublisher{ }{.}{.}% \insertpages{}{p. }{}% \insertnote{ }{.}{}% } \setuppublicationlayout[manual]{% \insertauthors{}{ }{\insertthekey{}{. }{}}% \insertpubyear{(}{). }{}% \inserttitle{\bgroup }{\/\egroup \insertseries{ (}{)}{}. }{}% \insertedition{ }{ edition.}{}% \insertorg{ }{.}{.}% \insertpages{}{p. }{}% \insertnote{ }{.}{}% } \setuppublicationlayout[incollection]{% \insertartauthors{}{ }{\insertthekey{}{. }{}}% \insertpubyear{(}{). }{}% \insertarttitle{\bgroup }{\egroup. }{}% \inserttitle {In \inserteditors{}% {, editor\ifnum\getvalue{editor@num}> 1 s\fi, }% {}% \bgroup}% {\egroup \insertseries {\insertvolume{, number }{~in }{ }}% {}% {}% \insertchap{\unskip, }{ }{ }% \insertpages{\unskip, pages~}{. }{\unskip. }% \insertedition{ }{ edition}{}% \insertpublisher{ }{.}{.}% }% {In \insertcrossref{}{}{}% \insertchap{\unskip, }{ }{ }% \insertpages{\unskip, pages~}{. }{\unskip. }% }% \insertnote{ }{.}{}% } \setuppublicationlayout[inproceedings]{% \insertauthors{}{ }{}% \insertpubyear{(}{). }{}% \insertarttitle{\bgroup }{\egroup. }{}%% \inserttitle {In \inserteditors{}% {, editor\ifnum\getvalue{editor@num}> 1 s\fi, }% {}% \bgroup}% {\egroup \insertseries {\insertvolume{, number }{~in }{ }}% {}% {}% \insertchap{\unskip, }{ }{ }% \insertpages{, pages~}{}{}% \insertorg{. }{.}{.}% }% {In \insertcrossref{}{}{}% \insertchap{\unskip, }{ }{ }% \insertpages{\unskip, pages~}{. }{\unskip. }% }% \insertnote{ }{.}{}% } \setuppublicationlayout[proceedings]{% \inserteditors{}{, editor% \ifnum\getvalue{editor@num}> 1 s\fi \ \global\editedbooktrue }{\insertthekey{}{ }{}}% \insertpubyear{(}{). }{}% \inserttitle {\bgroup}% {\egroup \insertseries {\insertvolume{, number }{~in }{ }}% {}% {}% \insertchap{\unskip, }{ }{ }% \insertpages{, pages~}{}{}% \insertorg{. }{.}{.}% }% {}% \insertnote{ }{.}{}% } \setuppublicationlayout[mastersthesis]{% \insertauthors{}{ }{}% \insertpubyear{(}{). }{}% \inserttitle{\bgroup }{\egroup \insertseries{ (}{)}{}. }{}% \insertbibtype{}{, }{Master's thesis, }% \insertpublisher{ }{.}{.}% \insertpages{ }{p. }{}% \insertnote{ }{.}{}% } \setuppublicationlayout[phdthesis]{% \insertauthors{}{ }{}% \insertpubyear{(}{). }{}% \inserttitle{\bgroup }{\egroup \insertseries{ (}{)}{}. }{}% \insertbibtype{}{, }{PhD thesis,}% \insertpublisher{ }{.}{.}% \insertpages{ }{ p. }{}% \insertnote{ }{.}{}% } \setuppublicationlayout[misc]{% \insertauthors{}{ }{\insertthekey{}{. }{}}% \insertpubyear{(}{). }{}% \inserttitle{\bgroup }{\egroup \insertseries{ (}{)}. }{}% \insertpublisher{ }{.}{.}% \insertpages{ }{p. }{}% \insertnote{ }{.}{}% } \setuppublicationlayout[techreport]{% \insertauthors{}{ }{}% \insertpubyear{(}{). }{}% \inserttitle{\bgroup }{\egroup \insertseries{ (}{)}{}. }{}% \insertbibtype{}{\insertvolume{ }{, }{, }}{Technical Report}% \insertpublisher{ }{.}{.}% \insertpages{ }{p. }{}% \insertnote{ }{.}{}% } \setuppublicationlayout[unpublished]{% \insertauthors{}{ }{}% \insertpubyear{(}{). }{}% \inserttitle{\bgroup }{\egroup \insertseries{ (}{)}{}. }{}% % \insertpublisher{ }{.}{.}% \insertpages{ }{p. }{}% \insertbibtype{(}{)}{}% \insertnote{ }{.}{}% } \protect how you can help me with this. :-) thanks so much. joel mendoza

2 1

subsection and special characters
by Bernd Militzer 02 Nov '09

02 Nov '09

Hi all, making transcriptions of old church books I defined two special characters nmacorn and mmacron, but when using subsections the characters are not printet. Has something changed or is this a bug? % <---snip % \enableregime[utf] \mainlanguage[de] \setupencoding[default=texnansi] % \usetypescript[modern] % als Standardschrift \usetypescript[chorus] % als Schreibschrift \setupbodyfont[modern,12pt] % allgemeine Schrift für das Dokument % % \startencoding[default] \definecharacter nmacron {\buildtextaccent\textmacron n} \definecharacter mmacron {\buildtextaccent\textmacron m} \stopencoding % \startbuffer Die Wiedergabe der Kirchenbucheinträge lehnt sich an die {\bi ursprüngliche} Schreibweise an. So wurde in der Regel über dem {\bi u} ein Querstrich geschrieben, also {\bi \u{u}} oder man schrieb ko\mmacron en, statt kommen oder beka\nmacron t statt bekannt. \stopbuffer % \starttext % \startchapter[title={Vorbemerkungen}] \startsection[title={Test}] \getbuffer\hfill OK \stopsection \startsection[title={Das Dokument}] \startsubsection[title={Allgemein}] \getbuffer\hfill PROBLEM !? \stopsubsection \startsubsection[title={Das Taufregister}] \getbuffer \hfill PROBLEM !? \stopsubsection \stopsection \startsection[title={Das Heiratsregister}] \getbuffer\hfill PROBLEM !? \stopsection \stopchapter % % \stoptext % % <--- snip This is LuaTeX, Version beta-0.43.0-2009081911 ConTeXt ver: 2009.09.12 14:44 MKIV fmt: 2009.9.13 int: english/english Thanks for help Bernd

2 3

\setupindenting trouble
by Femke Snelting 02 Nov '09

02 Nov '09

Hello, I am having a problem with setupindenting: \setupindenting[yes, next, 1em] Only the very first sentence on a page is being un-indented instead of each first paragraph in a textblock. The same command has worked for almost a year, until my latest run of the document on 11 October 2009. When I ran it again this evening, it appeared to have stopped working and I do not know why. I am running the latest version, but have tested with the 'current' version as well: MTXrun | current version: 2009.11.01 19:19 I hope someone can help -- I am facing a deadline tomorrow :-( best, Femke ---------------------------------- \setupindenting[yes,next,1em] \starttext \input knuth \blank \input knuth \blank \input knuth \blank \stoptext

1 0

Re: [NTG-context] Define exercise captions
by Vyatcheslav Yatskovsky 02 Nov '09

02 Nov '09

Hello, >> I need to define a Exercise command that will enumerate exercises and provide >> > captions. >> > >> > For example, >> > >> > \exercise{Conversion from hex to dec} >> > >> > should produce >> > >> > Exercise 1.1. Conversion from hex to dec. >> > >> > What is the best way to achieve that? Use \definehead or another command? >> > \defineenumeration[exercise][title=yes,way=bysection] > Thank you Aditya, but the result is rather shoking ) Please, try \starttext \defineenumeration[exercise][title=yes, text=Вправа, way=bysection, width=broad] \exercise{Розрахунок кривої, яка з'єднує три точки на площині} \stoptext The "Вправа" is putted twice, next time inside some strange brackets. The text gets out of the page. How to setup so that numeration will be done by subsection (1.1, 1.2, etc.)? Reards, Vyatcheslav

2 1