September 2020 - ntg-context - NTG Mailing Lists

How to shift unnumbered ToC entry?
by Lukas/ConTeXt 23 Sep '20

23 Sep '20

Hello, how do I shift unnumbered ToC entry (here: \subsubsection)? My attempt: ---- \setuphead[subsubsection][number=no] \setuplist[subsubsection][distance=20mm,width=20mm] \starttext \placecontent \page \section{S} \subsection{Ss} \subsubsection{Sss} \stoptext ---- I'm getting: " 1. S 1.1 Ss Sss " but I'd rather see: " 1. S 1.1 Ss Sss " How to achieve this? Best regards, Lukas

3 3

Full page image and caption in another page?
by José de Mattos Neto 23 Sep '20

23 Sep '20

Hi, it's my first message on this list. I've searched in ConTeXt manuals, TeX.SX and here, but couldn't find a way to achieve these 4 requirements altogether: 1. Place a figure as full-page figure 2. Change orientation accordingly (if it's a landscape PDF, for instance) 3. Make that using \setupfloat (or other setup), not directly in \placefloat 4. Place captions in another page (ideally on opposite page) Problems: - I can't get # 1 and # 3 at same time - \setupfloat doesn't have before option, which I could use to change orientation - I have no idea how to accomplish # 4 A minimal working example (PDF in attachment): %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \definepapersize[default][A4, portrait] \definelayout[default][topspace=0.6cm, topdistance=0cm, header=1cm, headerdistance=0cm, height=27.3cm, footer=0cm, backspace=4.2cm, width=13.6cm] \setuppapersize[default] \setuplayout[default] \setuppagenumbering[alternative=doublesided, location={header}] \setupexternalfigures[location={default}] \definepapersize[rotate][A4, landscape] \definefloat[bigfigure][bigfigures][figure] \setupfloat[bigfigure][default={page}, width=1\textwidth, height=1\textheight, before={\setuppapersize[rotate]}] % there's no before in setupfloat \setupcaption[bigfigure][location={opposite}] % there's no opposite location in setupcaption \starttext \showframe \dorecurse{2}{\input{knuth}} \setuppapersize[rotate] % this doesn't work because is in same page \startplacebigfigure[title={A cow}]{\externalfigure[cow]}\stopplacebigfigure \setuppapersize[default] \dorecurse{2}{\input{knuth}} \stoptext %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Thanks in advance! José Neto

2 1

Re: [NTG-context] issue with interaction=all and \insertpages
by Andres Conrado Montoya Acosta 23 Sep '20

23 Sep '20

I am also following this question and some related ones by Pablo with great interest, and it seems to me that it's falling through the cracks... so, I am asking again: is it possible to preserve links correctly when imposing / inserting pdf pages in ConTeXt? El lun., 21 sept. 2020 a las 5:00, <ntg-context-request(a)ntg.nl> escribió: > 3. issue with interaction=all and \insertpages (Pablo Rodriguez) > > Dear list, > > I have the following sample: > > \setuplayout[page] > \setupinteraction > [state=start, color=, contrastcolor=, focus=standard] > \enabledirectives[references.border=red] > \setupexternalfigures[interaction=all, method=pdf] > \setupinteractionscreen[option={portrait, paper}] > \starttext > %~ \insertpages[http://gaceta.rsme.es/abrir.php?id=1495][width=0pt] > \insertpages[GacRSocMatEsp.pdf][width=0pt] > \stoptext > > I have some issues with it. > > 1. For some strange reason, the first \insertpages command with a remote > file cannot deal with the interaction from the file (no internal or > external links). > > 2. The local file includes internal destinations to page parts. After > imposition, destinations to page for internal links cannot reach the > page parts as links in original document do. > > 3. Even external links are converted. On last page, > https://www.cs.umb.edu/~offner/files/pi.pdf is rewritten as > https://www.cs.umb.edu/õffner/files/pi.pdf. > > Besides the rewritten link, would it be possible that links are added so > they reach the same destinations as their source PDF document? > > Many thanks for your help, > > Pablo > -- > http://www.ousia.tk > Thanks for your attention. -- Andrés Conrado Montoya http://chiquitico.org

1 0

PDF/A conformance
by Denis Maier 22 Sep '20

22 Sep '20

Hi, I need to produce PDF/a. I've followed the advice on the Wiki, and the file validates with: https://www.pdf-online.com/osa/validate.aspx But Acrobat complains about some problem with the XMP definition. Does anyone know more about this? Best, Denis

2 3

More table questions
by Denis Maier 22 Sep '20

22 Sep '20

Hi, I usually don't need tables, therefore this maybe stupid question: What is the currently recommended way to typeset tables? Still natural tables? Or extreme tables? (My tables won't be 30 pages long.) Also, how do you easiest define booktabs style tables? I mean: can you define tables such that the last row end with thicker lines without having to make this explicit? Is there a mechanism for this? (That would make the XML mapping much simpler.) Best Denis

4 6

Judeo-Arabic punctuation
by Denis Maier 22 Sep '20

22 Sep '20

Hi, I'm getting weird punctuation with a judeo-arabic text: ==================== %This gives correct results \definefontfamily[hebrew][rm][SBL Hebrew] [range=hebrew, force=yes, features=hebrew] \setupbodyfont[hebrew] % This doesn't %\definefallbackfamily[mainface][rm][SBL Hebrew] [range=hebrew, force=yes, features=hebrew] %\definefontfamily[mainface][rm][Tex Gyre Pagella] %\setupbodyfont[mainface] \setupalign[r2l] \setupdirections[bidi=global,method=unicode] \starttext פאדא וג̇ד אפעאל אללה תעאלי עלי ג̇איה̈ אלאחכאם ואלאתסאק נחו כלקה̈ אלאנסאן עלי עג̇יב צורתה ותכֿטיטה̈ וחואסה ומג̇ארי טעאמה ושראבה ותרכיב(ה) אעצ̇איה ותרתיבהא פי אמאכנהא וכמה קאל אלואלי ע׳אלס׳ הלא כֶֿחָלָבֿ ת[ת]יכֵֿני וכגבינה תקפיאני. עור ובשר תלבי[שני] ובעצמות וגידים תסוככני חיים וחסד [עשי]ת עמדי. ופקדתך שמרה [רוחי]. \stoptext =============================== The first setting produces correct punctuation. The second setting works well with regular Hebrew text, even with punctuation. But the special diacrital marks needed for judeo-arabic texts are misplaced with this settting. (I can only guess, but it has probably to do with the Unicode range that is covered by `range=hebrew`.) Best, Denis

1 0

ZapfDingbats Unicode differences MKIV vs LMTX
by Christoph Reller 22 Sep '20

22 Sep '20

Dear List, I have the following MWE: \definefontsynonym[ZapfDingbats][file:ZapfDingbats][features=dingbats] \usemodule [fnt-10] \starttext (1) \getglyphdirect{ZapfDingbats}{61491}\crlf % MKIV log: char  (U+0F033) in font 'ZapfDingbats-4' with id 8: missing (2) \getglyphdirect{ZapfDingbats}{983059} % LMTX log: char 󰀓 (U+F0013) in font 'ZapfDingbats-4' with id 8: missing \ShowCompleteFont{name:ZapfDingbats}{14pt}{1} \stoptext In MKIV, line (1) fails to output the requested glyph, while line (2) produces a "check" (✓). In LMTX, line (2) fails and line (1) produces the "check" (✓) . The output of "\ShowCompleteFont" reports differing Unicodes for the same glyphs. Apparently the Unicodes for ZapfDingbats have changed. I would like to have a "check" (✓) in the output for both MKIV and LMTX. Options: A) Is there a way to address the glyph in ZapfDingbats for both MKIV and LMTX uniformly, e.g. by glyph index? (By glyph name does not seem to work: MKIV reports glyph names, LMTX does not.) B) Is there a conditional that I can build into the source to distinguish between MKIV and LMTX? C) Is there a font in the distribution for which I can have a "check"-symbol in both MKIV and LMTX? Any help is appreciated! Cheers, Christoph

3 8

How to get the last item from an XML node
by Denis Maier 22 Sep '20

22 Sep '20

Hi struggling again: Shouldn't the code below give me the last element under <tbody>? Right now \xmlfilter{#1}{/tr/last()/command(xml:table:tbody:tr)} gives me nothing... (Use case is that I want to have a frame above the table and one bar below. So I think I should wrap the last line in the \startxtablefoot ...\stopxtablefoot, i.e., I need one command for the last element, and one for the rest (Or is there a better way?). What would be the everything but the last? What am I missing? Thanks again, Denis ================== \setupxtable[frame=off,split=yes] \setupxtable[head][topframe=on,bottomframe=on] \setupxtable[body][] \setupxtable[foot][bottomframe=on] \startbuffer[test] <?xml version="1.0" encoding="utf-8" ?> <article> <table> <tbody> <tr> <td>5</td> <td>A</td> </tr> <tr> <td>7</td> <td>B</td> </tr> <tr> <td>2</td> <td>C</td> </tr> </tbody> </table> </article> \stopbuffer \startxmlsetups xml:test \xmlsetsetup{#1}{*}{-} \xmlsetsetup{#1}{article}{xml:*} \xmlsetsetup{#1}{table}{xml:table} \stopxmlsetups \xmlregistersetup{xml:test} \startxmlsetups xml:article \starttext \xmlflush{#1} \stoptext \stopxmlsetups \startxmlsetups xml:table \startembeddedxtable \xmlfilter{#1}{/tbody/command(xml:table:tbody)} \stopembeddedxtable \stopxmlsetups \startxmlsetups xml:table:tbody \xmlfilter{#1}{/tr/last()/command(xml:table:tbody:tr)} \stopxmlsetups \startxmlsetups xml:table:tbody:tr \startxrow \xmlfilter{#1}{/td/command(xml:table:tbody:tr:td)} \stopxrow \stopxmlsetups \startxmlsetups xml:table:tbody:tr:td \startxcell \xmlflush{#1} \stopxcell \stopxmlsetups \xmlprocessbuffer{test}{test}{} ==================

2 2

Re: [NTG-context] \dorecurse{}{} problem
by Jeong Dal 21 Sep '20

21 Sep '20

Dear Aditya, Jairo, Wolfgang, and Otared, Thank you for the replies and explanations. I also read the blog. In this case, using '##1’ is an easy way. For more complex table, I may use luacode. Thanks again. Best regards, Dalyoung

2 1

\dorecurse{}{} problem
by Jeong Dal 21 Sep '20

21 Sep '20

Hi, I tried to make a table using \dorecurse or \doloop as in the example. There is no error but \recurselevel is not increased, all are 0 in the first example and only two rows are created with the \recurselevel 0 and 2 only in the second example. Does the tabulate cause the error? What is wrong in this MWE? Thank you for reading. Best regards, Dalyoung ***** \startbuffer[AdjacencyList1] \starttabulate[|c|cw(2cm)|] \HL \dorecurse{8} {\NC \recurselevel \NC \NC\NR \HL} \stoptabulate \stopbuffer \startbuffer[AdjacencyList2] \starttabulate[|c|cw(2cm)|] \HL \doloop{ \ifnum \recurselevel=7 \exitloop \fi \NC \recurselevel \NC \NC\NR \HL } \stoptabulate \stopbuffer \starttext \getbuffer[AdjacencyList1] \getbuffer[AdjacencyList2] \stoptext > 2020. 9. 21. 오후 10:50, ntg-context-request(a)ntg.nl 작성: > > Send ntg-context mailing list submissions to > ntg-context(a)ntg.nl > > To subscribe or unsubscribe via the World Wide Web, visit > https://mailman.ntg.nl/mailman/listinfo/ntg-context > or, via email, send a message with subject or body 'help' to > ntg-context-request(a)ntg.nl > > You can reach the person managing the list at > ntg-context-owner(a)ntg.nl > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of ntg-context digest..." > > > Today's Topics: > > 1. Parallel text support (Denis Maier) > 2. Re: Parallel text support (Taco Hoekwater) > 3. Re: ZapfDingbats Unicode differences MKIV vs LMTX > (Christoph Reller) > 4. Re: ZapfDingbats Unicode differences MKIV vs LMTX (Hans Hagen) > 5. Math fonts for Nimbus fonts (Otared Kavian) > 6. Re: 2020 Meeting recordings? (Taco Hoekwater) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 21 Sep 2020 12:21:37 +0200 > From: Denis Maier <denis.maier.lists(a)mailbox.org> > To: ntg-context(a)ntg.nl > Subject: [NTG-context] Parallel text support > Message-ID: <780fe43c-f2c3-6ea1-04f5-d4d5c22e7d4a(a)mailbox.org> > Content-Type: text/plain; charset=utf-8; format=flowed > > Hi, > > I'm trying to typeset a parallel text that should appear in columns. The > sources are XML, and there I have to use tables for this. So, I thought > the easiest way is to use extreme tables for this: > > ========================= > \starttext > > \dorecurse{3}{\input knuth} > > \startxtable[split=yes,frame=off] > \startxrow > \startxcell Text \stopxcell > \startxcell Übersetzung \stopxcell > \stopxrow > \startxrow > \startxcell \input ward \stopxcell > \startxcell \input tufte \stopxcell > \stopxrow > \stopxtable > > \stoptext > ========================= > > However, as it turns out, split only seems to mean that the table is > split between rows, individual rows stay on the same page. > > Is there a better approach? I've found the page-streams, but that seems > to be too much... > > Best, > Denis > > > ------------------------------ > > Message: 2 > Date: Mon, 21 Sep 2020 13:58:11 +0200 > From: Taco Hoekwater <taco(a)elvenkind.com> > To: mailing list for ConTeXt users <ntg-context(a)ntg.nl> > Subject: Re: [NTG-context] Parallel text support > Message-ID: <A451CEA9-C30B-4980-AAAE-235CA940A56B(a)elvenkind.com> > Content-Type: text/plain; charset=utf-8 > > > >> On 21 Sep 2020, at 12:21, Denis Maier <denis.maier.lists(a)mailbox.org> wrote: >> >> >> However, as it turns out, split only seems to mean that the table is split between rows, individual rows stay on the same page. >> >> Is there a better approach? I've found the page-streams, but that seems to be too much… > > \starttabulate > > > > ------------------------------ > > Message: 3 > Date: Mon, 21 Sep 2020 14:55:02 +0200 > From: Christoph Reller <christoph.reller(a)gmail.com> > To: Hans Hagen <j.hagen(a)xs4all.nl> > Cc: mailing list for ConTeXt users <ntg-context(a)ntg.nl> > Subject: Re: [NTG-context] ZapfDingbats Unicode differences MKIV vs > LMTX > Message-ID: > <CAO8LnPHJ5Ykp5HyFz2MXDM-+04AJ_uADarwunmPseDafmgOOng(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > On Sat, Sep 19, 2020 at 12:04 PM Hans Hagen <j.hagen(a)xs4all.nl> wrote: > >> On 9/19/2020 6:18 AM, Christoph Reller wrote: >>> On Fri, Sep 18, 2020 at 4:17 PM Hans Hagen <j.hagen(a)xs4all.nl >>> <mailto:j.hagen@xs4all.nl>> wrote: >>> >>> On 9/18/2020 11:23 AM, Christoph Reller wrote: >>> >> \definefontsynonym[ZapfDingbats][file:ZapfDingbats][features=dingbats] >>>> \usemodule [fnt-10] >>>> \starttext >>>> (1) \getglyphdirect{ZapfDingbats}{61491}\crlf % MKIV log: char  >>>> (U+0F033) in font 'ZapfDingbats-4' with id 8: missing >>>> (2) \getglyphdirect{ZapfDingbats}{983059} % LMTX log: char 󰀓 >>>> (U+F0013) in font 'ZapfDingbats-4' with id 8: missing >>>> \ShowCompleteFont{name:ZapfDingbats}{14pt}{1} >>>> \stoptext >>>> >>> Dingbats are old school t1 without proper names so we can't use >>> unicodes. However, there is a goodie that should do that so that in >>> principle it should work with unicodes but there is some interference >>> going on (i'll look at that) >>> >>> For nwo access by 'name' or 'index' (these are kind of stable for >> such >>> an old font): >>> >>> n:a34 : \getglyph{ZapfDingbats}{\tochar{n:a34}} \par >>> n:a35 : \getglyph{ZapfDingbats}{\tochar{n:a35}} \par >>> i:48 : \getglyph{ZapfDingbats}{\tochar{i:48}} \par >>> i:49 : \getglyph{ZapfDingbats}{\tochar{i:49}} \par >>> n:a104 : \getglyph{ZapfDingbats}{\tochar{n:a104}} \par >>> n:a105 : \getglyph{ZapfDingbats}{\tochar{n:a105}} \par >>> >>> Thank you Hans! >>> Access by glyph index with \tochar{i:19} works well for both MKIV and >>> LMTX. Access by name with \tochar{n:a39} does not work in LMTX with log >>> message: char ✓ (U+02713) in font 'ZapfDingbats-4' with id 8: missing. >>> Also \ShowCompleteFont does not report any glyph names in LMTX. >> should be a bit better in yesterdays upload (i also changed the file >> name alias so that in pinciple unicode should work too) > > > Dear Hans, > > Thank you for working on this. I have tried version 2020.09.20: Unicode > input works for the "Private Use Area" Unicodes reported in > \ShowCompleteFont. Such Unicodes are, however, not desirable. Moreover, in > MKIV, a Unicode U+2713 (Check Mark) in the input did produce the > ZapfDingbats check, e.g. as follows: > > \definefontsynonym[ZapfDingbats][file:ZapfDingbats][features=dingbats] > \definefont[zapfdingbats][ZapfDingbats] > \starttext > {\zapfdingbats ✓} > \definedfont[name:ZapfDingbats]✓ > \stoptext > > I still get no check mark in the output PDF and a log message "char ✓ > (U+02713) in font 'ZapfDingbats-4' with id 8: missing". Am I using the font > wrongly? > (This has not a high priority for me, because I have the unified access by > glyph index.) > > Christoph >

5 6