November 2014 - ntg-context - NTG Mailing Lists

still buggy TOC generation
by Pablo Rodriguez 09 Nov '14

09 Nov '14

Hans, many thanks for the fix in latest beta from 2014.11.08 15:07. I still experience a bug that it wasn’t there before beta from 2014.11.06 14:55. Here you have the sample: \startsetups[placelist:section] \start \setupinterlinespace[line=2.8ex] \placelist[section][alternative=d, pagenumber=no] \par \stop \stopsetups \setuplist [chapter] [before={\blank[big]}, after=\directsetup{placelist:section}] \starttext \title{Inside}\placelist[part,chapter][criterium=all] \chapter{Foreword} \dorecurse{10}{\section{Section from Foreword}} \part{Introduction} \chapter{\ConTeXt\ and digital typography} \dorecurse{10}{\section{Section from Introduction}} \chapter{Chapter 1} \dorecurse{10}{\section{Section from Chapter 1}} \chapter{Chapter 2} \dorecurse{10}{\section{Section from Chapter 2}} \stoptext Only the latest stable version (beta from 2014.01.03 00:40) generates the right TOC, if I remove [criterium=all] from \placelist[part,chapter]. With [criterium=all], I get all section titles in each chapter entry in the TOC. With latest beta from today and removing [criterium=all], the first two chapters listed in items have the section titles from both chapters (which is wrong). Sorry, but isn’t this caused by the changes introduced in beta from 2014.11.06 14:55? Many thanks for your help, Pablo -- http://www.ousia.tk

2 2

ConTeXt gobble my mind
by Pierre-François Bonnefoi 09 Nov '14

09 Nov '14

Hello, I've made a lot of improvement to my slides format for my teaching material and I've run into a serious issue with gobbleinput that I can express with with simple lines : \starttext \gobbleuntil\stoptyping \starttyping { printf("%d", data); } \stoptyping This is ignored ! \stoptext How can I use correctly gobbleinput to make it works ? Thank you for your help, kind regards, Pierre-François Bonnefoi. -- Bonnefoi Pierre-Francois | E-mail : bonnefoi(a)unilim.fr http://libpfb.so/ Universite de Limoges, Laboratoire XLIM | Tel : 06 28 18 03 38 123 av Albert Thomas | Mrs. Peel, we're needed... 87060 Limoges CEDEX - FRANCE | The Avengers.

6 18

Numbering in a Table
by Fabrice Couvreur 08 Nov '14

08 Nov '14

Hi, Is it possible to use an itemize environment in a table ? Best regards, Fabrice \starttext \startsetups[table:initialize] \setupTABLE[height=0.8cm,align={middle,lohi}] \setupTABLE[row][1][background=color,backgroundcolor=cyan] \setupTABLE[1][1][background=color,backgroundcolor=white] \setupTABLE[column][1][width=10cm,align={right,lohi}] \setupTABLE[column][2,3,4][width=2.5cm,align={middle,lohi}] \setupTABLE[1][1][frame=off] \stopsetups \bTABLE[setups=table:initialize] \bTR \bTD \eTD \bTD Vrai \eTD \bTD Faux \eTD \bTD Peut-être \eTD \eTR \bTR \bTD \color[red]{a.} Les droites (IJ) et (AB) sont parallèles.\eTD \bTD \eTD \bTD \eTD \bTD \eTD \eTR \bTR \bTD \color[red]{b.} Les droites (JK) et (BC) sont parallèles. \eTD \bTD \eTD \bTD \eTD \bTD \eTD \eTR \eTABLE{} \stopmidaligned \stopitemize \stoptext

3 4

\endnote beyond \placenotes[endnote]
by Gerben Wierda 08 Nov '14

08 Nov '14

I've got the \placenote[endnotes] as first appendix in a book but I want to have an \endnote in a next appendix. The number appears, but the endnote is not added to the actual endnotes. Impossible to do? (I can of course put the endnotes as the last appendix) G

2 1

upate error
by Wolfgang Werners-Lucchini 08 Nov '14

08 Nov '14

Hallo, tried to run update from context minimal and got the following error: --------------------------------------------------------------------- ! LuaTeX error E:/context/tex/texmf-context/tex/context/base/data- env.lua:118: a ttempt to index local 'luasuffixes' (a nil value) stack traceback: E:/context/tex/texmf-context/tex/context/base/data- env.lua:118: in main chunk E:/context/tex/texmf-context/tex/context/base/luat- cod.lua:42: in functi on 'registercode' [string "main ctx instance"]:1: in main chunk. \registerctxluafile ...ua.registercode("#1","#2")} l.35 \registerctxluafile{data-env}{1.001} ? ---------------------------------------------------------------------- What can I do? Wolfgang

2 1

Bug with custom TOC
by Michał Goliński 08 Nov '14

08 Nov '14

The following example is taken from the wiki (http://wiki.contextgarden.net/Command/setuplist) \define[3]\SectionToCEntry{ \leftaligned\bgroup \hbox to 2em{#3}% \hskip 1em \vtop{\hsize\dimexpr\textwidth-3em\relax#2}% \egroup } \setuplist [part] [alternative=interactive, command=\SectionToCEntry] \setuplist [chapter] [alternative=interactive, command=\SectionToCEntry] \setuplist [section] [alternative=interactive, command=\SectionToCEntry] \starttext \startcolor[darkgreen] \completecontent[criterium=all] \stopcolor \page[yes] \part{I} \chapter{1} \section{1.1} \section{1.2} \section{1.3} \stoptext The fresh beta prints all the sections in TOC in a single line (so TOC has three lines only), while texlive prints it as expected: each section on its own line. I've tried adding \par after \egroup, but it doesn't help. Curiously, it works if there are no sections in the TOC. Best regards Michał

2 1

bug in TOC generation
by Pablo Rodriguez 08 Nov '14

08 Nov '14

Dear list, using latest beta from 2014.11.06 14:55, TOC is missing from this sample: \starttext \title{Sumario}\placelist[part,chapter] \startfrontmatter \chapter{Prólogo} \part{Introducción} \chapter{\ConTeXt\ y la tipografía digital} \stopfrontmatter \stoptext I think this is a bug. Many thanks for your help, Pablo -- http://www.ousia.tk

2 3

Strange behavior with the command \color[]{}
by Fabrice Couvreur 07 Nov '14

07 Nov '14

Hi, In the code below, if I comment the two lines, it's okay, but if I uncomment those two lines, the number of faces of the cubes is not white but black, and there are pieces of text green. Best regards, Fabrice \usemodule[tikz] \usetikzlibrary[calc] \usetikzlibrary[cd] \usetikzlibrary[3d] \usetikzlibrary[arrows.meta] \usetikzlibrary[positioning] %\definecolor[H1prime][c=0.50, m=0.00, y=1.00, k=0.00] %\definecolor[H4][c=0.07, m=0.00, y=0.15, k=0.00] \starttext \startsetups[table:initialize] \setupTABLE[height=2.5cm,align={middle,lohi}] \setupTABLE[column][2][[width=3cm,align={right,lohi},frame=off] \setupTABLE[column][3][[width=8cm,align={right,lohi},frame=off] \setupTABLE[1][1][[width=5cm,align={right,lohi},frame=off] \setupTABLE[1][2,3][bottomframe=off] \setupTABLE[1][3,4][topframe=off] \stopsetups \bTABLE[setups=table:initialize] \switchtobodyfont[11pt] \bTR \bTD \color[orange]{\tfa Suite d'instructions correspondant au programme de calcul :} \eTD \bTD \eTD \bTD \color[orange]{\tfa Valeur de la variable $X$ après l'exécution de chaque instruction :} \eTD \eTR \bTR \bTD $X$ prend la valeur $7$ \eTD \bTD \dontleavehmode \startMPcode input hvdm; l:=2.8mm; r:=0.6; alfa:=45; beta:=0; gamma:=0; defineDefaultArrow (l, r, alfa, beta, gamma); pickup pencircle scaled 0.4mm; arrowline (0cm,0cm)--(3cm,0cm) withcolor blue ;\stopMPcode \eTD \bTD On affecte à $X$ la valeur $7$ : la valeur de $X$ est \color[green]{$7$}. \eTD \eTR \bTR \bTD $X$ prend la valeur $2X$ \eTD \bTD \dontleavehmode \startMPcode input hvdm; l:=2.8mm; r:=0.6; alfa:=45; beta:=0; gamma:=0; defineDefaultArrow (l, r, alfa, beta, gamma); pickup pencircle scaled 0.4mm; arrowline (0cm,0cm)--(3cm,0cm) withcolor red ;\stopMPcode\eTD \bTD On affecte à $X$ la valeur $2X$.\\Comme la valeur de $X$ est \color[green]{$7$}, la nouvelle valeur de $X$ est : $2\times\color[green]{7}$.\\La valeur de $X$ est maintenant \color[green]{$14$}. \eTD \eTR \bTR \bTD $X$ prend la valeur $X+3$ \eTD \bTD \dontleavehmode \startMPcode input hvdm; l:=2.8mm; r:=0.6; alfa:=45; beta:=0; gamma:=0; defineDefaultArrow (l, r, alfa, beta, gamma); pickup pencircle scaled 0.4mm; arrowline (0cm,0cm)--(3cm,0cm) withcolor green ;\stopMPcode\eTD \eTR \bTD On affecte à $X$ la valeur $X+3$.\\Comme la valeur de $X$ est \color[green]{$14$}, la nouvelle valeur de $X$ est : $\color[green]{14}+3$.\\La valeur de $X$ est maintenant \color[green]{$17$}. \eTD \eTABLE{} \startsetups[table:initialize] \setupTABLE[height=2cm,align={middle,lohi}] \setupTABLE[column][1][[width=4cm,align={right,lohi},frame=on, framecolor=H1prime] \setupTABLE[column][2][[width=5cm,align={middle,lohi},frame=off] \setupTABLE[column][3][[width=1cm,align={middle,lohi},frame=off] \setupTABLE[column][4][[width=9cm,align={right,lohi},frame=off] \setupTABLE[1][1][frame=off] \setupTABLE[1][2,3][bottomframe=off] \setupTABLE[1][3,4][topframe=off] \stopsetups \bTABLE[setups=table:initialize] \switchtobodyfont[10pt] \bTR \bTD \color[red]{ Suite d'instructions :} \eTD \bTD \eTD \bTD \eTD \bTD \color[orange]{ Valeur de la variable $A$ et valeur de la variable $B$ après l'exécution de chaque instruction :}\eTD \eTR \bTR \bTD $A$ prend la valeur $3$ \eTD \bTD \tikzset{% cube join/.style={ thick, -{Stealth}, }, cube face/.style={ minimum size=1cm, outer sep=0pt, draw=white, thick, line join=round, shading=ball, text=white, }, face color/.style={cube face/.append style={ball color=#1}}, pics/cube/.style args={#1 with #2}{ code={ \node [cube face, label={[name=-label]below:#2}] (-front) {#1}; \node [cube face] (-top) at (-front.north west) [anchor=south west, xslant=1, yscale=1/3] {}; \node [cube face] (-side) at (-front.south east) [anchor=south west, yslant=1, xscale=1/3] {}; }} } \starttikzpicture \pic [cube face/.append style={ball color=green}] at (-1, 1) {cube=3 with $A$};\pic [cube face/.append style={ball color=red}] at ( 1, 1) {cube={} with $B$}; \stoptikzpicture \eTD \bTD \dontleavehmode \startMPcode input hvdm; l:=2.8mm; r:=0.6; alfa:=45; beta:=0; gamma:=0; defineDefaultArrow (l, r, alfa, beta, gamma); pickup pencircle scaled 0.4mm; arrowline (1cm,0cm)--(0cm,0cm) ;\stopMPcode \eTD \bTD La valeur de $A$ est \color[green]{3} et $B$ n'a pas encore de valeur \eTD \eTR \bTR \bTD $B$ prend la valeur $A+1$ \eTD \bTD \tikzset{% cube join/.style={ thick, -{Stealth}, }, cube face/.style={ minimum size=1cm, outer sep=0pt, draw=white, thick, line join=round, shading=ball, text=white, font=\bfseries }, face color/.style={cube face/.append style={ball color=#1}}, pics/cube/.style args={#1 with #2}{ code={ \node [cube face, label={[name=-label]below:#2}] (-front) {#1}; \node [cube face] (-top) at (-front.north west) [anchor=south west, xslant=1, yscale=1/3] {}; \node [cube face] (-side) at (-front.south east) [anchor=south west, yslant=1, xscale=1/3] {}; }} } \starttikzpicture \pic [cube face/.append style={ball color=green}] at (-1, 1) {cube=3 with $A$}; \pic [cube face/.append style={ball color=red}] at ( 1, 1) {cube=4 with $B$}; \stoptikzpicture \eTD \bTD \dontleavehmode \startMPcode input hvdm; l:=2.8mm; r:=0.6; alfa:=45; beta:=0; gamma:=0; defineDefaultArrow (l, r, alfa, beta, gamma); pickup pencircle scaled 0.4mm; arrowline (1cm,0cm)--(0cm,0cm) ;\stopMPcode \eTD \bTD Comme la valeur de $A$ est \color[green]{$3$}, la valeur de $B$ est : $\color[geen]{3}+1$, soit \color[red]{$4$}.\\La valeur de $A$ ne change pas : elle reste égale à \color[green]{$3$}.\eTD \bTR \bTD $A$ prend la valeur $A+B$ \eTD \bTD \tikzset{% cube join/.style={ thick, -{Stealth}, }, cube face/.style={ minimum size=1cm, outer sep=0pt, draw=white, thick, line join=round, shading=ball, ball color=red, text=white, font=\bfseries }, face color/.style={cube face/.append style={ball color=#1}}, pics/cube/.style args={#1 with #2}{ code={ \node [cube face, label={[name=-label]below:#2}] (-front) {#1}; \node [cube face] (-top) at (-front.north west) [anchor=south west, xslant=1, yscale=1/3] {}; \node [cube face] (-side) at (-front.south east) [anchor=south west, yslant=1, xscale=1/3] {}; }} } \starttikzpicture \pic [cube face/.append style={ball color=green}] at (-1, 1) {cube=7 with $A$}; \pic [cube face/.append style={ball color=red}] at ( 1, 1) {cube=4 with $B$}; \stoptikzpicture \eTD \bTD \dontleavehmode \startMPcode input hvdm; l:=2.8mm; r:=0.6; alfa:=45; beta:=0; gamma:=0; defineDefaultArrow (l, r, alfa, beta, gamma); pickup pencircle scaled 0.4mm; arrowline (1cm,0cm)--(0cm,0cm) ;\stopMPcode \eTD \bTD Comme la valeur de $A$ est \color[green]{3} et que celle de $B$ est \color[red]{$4$}, la nouvelle valeur de $A$ est : $\color[green]{3}+\color[red]{4}$, c'est-à-dire \color[green]{$7$}.\\La valeur de $B$ ne change pas : elle reste égale à \color[red]{$4$}. \eTD \eTR \eTABLE{} \stoptext

6 12

Re: [NTG-context] Equivalent of os.resultof(...) in LaTeX
by Xan 07 Nov '14

07 Nov '14

On Mon, 3 Nov 2014 14:31:17 +0100 Xan <dxpublica(a)telefonica.net> ha escrit: > It does not work:> \documentclass{article} > > \begin{document} > > \directlua{ > > local handle = io.popen("sha256sum \jobname.tex | cut -c -5","r") > > if handle then > > local result = handle:read("*all") or "" > > handle:close() > > tex.print(result) > > end > > } > > \end{document} > > Neither this: > > > \directlua{ > > require "lualibs-os" > > tex.sprint(os.resultof("sha256sum \jobname.tex | cut -c -5")) > > } > > > Blank. Nothing displayed.

2 4

Re: [NTG-context] Natural tables introduces spaces in \type
by Christoph Reller 07 Nov '14

07 Nov '14

On 11/6/2014 9:58 AM, Hans Hagen wrote: > we could have a specific filename cleaner but of course there will be > users who have paths that have spaces after the \ ... okay, we could > just not support evil paths like that > > Hans A rigorous filename cleaner would have to treat a huge number of possible Unicodes. This is overkill. I believe the best would be to have a cleaner for all ascii "symbols". That would fit most purposes of writing file names and URIs: !#"$%&'*()+,-./:;<=>?@[\]^_`{|}~ Of the above characters the following are disallowed on NTFS: "*/:<>?| Still I think they should be included in the cleaner. If % or # pose problems then they may be omitted. With the current "absolute"-cleaner, a space after \ is preserved correctly, so I don't understand your comment: \definetype[ctype][compact=absolute]\starttext \bTABLE\bTR\bTD \ctype{\a\ b} \eTD\eTR\eTABLE\stoptext I would be glad if you could implement such a "ascii-symbol"-cleaner. Thanks, Christoph

2 1