November 2014 - ntg-context - NTG Mailing Lists

Disable Ligatures in \type
by Gareth Jones 21 Nov '14

21 Nov '14

Hi all, When I use \type{} or \starttyping, I get unwanted ligatures in ConTeXt MkIV output (e.g. “–” for “--” and the ff/fl/fi ligatures). Please see the attached for a minimal example. Things work as expected with the default fonts, but break when \definefontfamily is used, even for Latin Modern Mono. Have I missed some documentation, or is there a bug? Thanks, Gareth

2 2

unwanted page at end
by Alan Bowen 21 Nov '14

21 Nov '14

Using the latest beta, the workaround from the wiki, \setuppagenumbering[alternative=doublesided] \setupsectionblock[frontpart][page=no] \setupsectionblock[bodypart][page=no] \setupsectionblock[appendix][page=no] \setupsectionblock[backpart][page=no] \starttext \startbodymatter% or backmatter etc. After this page, there is another empty one. \stopbodymatter \stoptext fails to prevent a blank page at the end. Is there a new way to do this now? I used to rely on \installpagebreakhandler{last}{}, but this does not seem to work either: it now permits a final page with a page number. Alan

2 2

Re: [NTG-context] Support of PDF Optional Content Groups (Layers)
by Christoph Reller 20 Nov '14

20 Nov '14

On 11/17/2014 13:43 PM, Hans Hagen wrote: > On 11/17/2014 11:51 AM, Christoph Reller wrote: > > Is there any way to construct "Set-OCG-State Actions" with ConTeXt? (See > > Section 8.5 Actions in the PDF Reference.) I admit that this is an > > advanced feature of PDF and that most viewers apart from the Adobe > > Reader are not capable of handling OCGs correctly. > > I'm not sure what you mean but with the \goto command you can do a lot, > including sequences of actions that enable/disable layers and so (often > these things are done via javascript actions). Thank you Hans for the pointer to \goto. Unfortunately, javascript is not suitable for my purpose because the PDF will be converted to PDF/A2. I want to switch on and off OCGs but with Set-OCG-State actions. Even if this is beyond the capabilities of ConTeXt, it is nice to know that there is a javascript-based solution. Christoph

2 1

Adjusting topspace for letterhead in layer construct
by jdh 20 Nov '14

20 Nov '14

mtx-context | current version: 2014.10.18 14:30 I only want about 3 to 5 mm between the physical top of the page and the top of the letterhead (in this example, a company's and contact information). In \setlayer I set y=3mm The pdf view of the output looks good, but an actual printout (and a look at a print preview with a pdf viewer) of the generated pdf file puts the top of the letterhead about 17 mm down from the top edge. This is too much. I tried adjusting topspace and topdistance to 0 didn't seem to have any affect. I am using theh ConText standalone: mtx-context version: 2014.10.18 14:30 Here is a simple minimal exmple: % % Start of minimal example \setuppapersize[letter][letter] \setuppagenumbering[location=footer] \setuplayout[ backspace=31mm, header=5mm, rightmargin=2cm, leftmargin=2cm ] \definelayer [Logo] % name of the layer we are defining [ repeat=yes, x=5mm,y=3mm, % Just what is this? hoffset=0mm,voffset=0mm, % and what is this? ...offset from where? width=\paperwidth ] \setupTABLE[r][1,2,3][height=5mm,frame=off] % Put letterhead information in here. \starttext \setlayer[Logo][] { \bTABLE \bTR \bTD \eTD \bTD \sc{Company Name}\eTD \bTD \sc{info}(a)\sc{something}.\sc{where} \eTD \eTR \bTR \bTD \eTD \bTD 2059 Forest Ave, Ste X \eTD \bTD \sc{www}.\sc{domain}.\sc{topleveldomain} \eTD \eTR \bTR \bTD \eTD \bTD City, Province \eTD \bTD Tel (xxx) 999-1234 \eTD \eTR \eTABLE } \setupbackgrounds[page][background=Logo] ~ % Need `` to avoid a NULL content page so can generate a pdf \stoptext % % End of minimal example

2 1

Re: [NTG-context] Natural tables introduces spaces in \type
by Christoph Reller 20 Nov '14

20 Nov '14

On 11/5/2014 21:50 PM, Christoph Reller wrote: > On 11/5/2014 10:28 AM, Hans Hagen wrote: > > On 11/5/2014 8:09 AM, Christoph Reller wrote: > > > Thank you very much Hans! > > > > > > Maybe you could tell me why the following still produces a space in > > > front of the full stop: > > > > > > \definetype[ctype][compact=absolute] > > > \starttext > > > \bTABLE > > > \bTR \bTD \ctype{\test.txt} \eTD \eTR > > > \eTABLE > > > \stoptext > > > > because the absolute cleaner only deals with \foo { and \foo [ > > > > > If this issue is resolved I will be glad to wikify. > > > > i'll add the . to the filter criteria > > Thank you for the explanation. I am not sure if it is a wise idea to add > only "." (the full stop). I tried the following characters, and they all > are preceded by a space: > > . - _ # % , ; @ ! > > Basically, what I want is to write a file system path name such as > C:\Path_to-my\file.ext. The above characters are all valid file system > characters. Is there a better solution? Or are you willing to add all the > above (maybe except for # and %) to the absolute cleaner? For anybody interested in this: I have decided to resort to \hyphenatedurl{...}. This means that I have to escape \ as \\, # as \# and % as \letterpercent. Let me know if you have a better solution. Christoph

1 0

layer letterhead and top down distance
by jdh 19 Nov '14

19 Nov '14

I am using: mtx-context | current version: 2014.10.18 14:30 I am typesetting a simple letterhead for correspondence. The design calls for only about a 3 to 5 mm distance between the physical top of the page and the top of the typeset letterhead. The pdf view of the output looks good, but an actual printout (and a look at a "print preview" with a pdf viewer) of the generated pdf file puts the top of the letterhead about 17 mm (14mm over target size) down from the top edge. This is too much. I tried adjusting topspace and topdistance to 0 didn't seem to have any affect. In \setlayer I set y=3mm I tried adjusting topspace but it didn't do what I wanted and topdistance was already 0. I am using theh ConText standalone: mtx-context version: 2014.10.18 14:30 Here is a simple minimal file. % % Start of minimal example \setuppapersize[letter][letter] \setuppagenumbering[location=footer] \setuplayout[ backspace=31mm, header=5mm, rightmargin=2cm, leftmargin=2cm ] \definelayer [Logo] % name of the layer we are defining [ repeat=yes, x=5mm,y=3mm, % Just what is this? hoffset=0mm,voffset=0mm, % and what is this? ...offset from where? width=\paperwidth ] \setupTABLE[r][1,2,3][height=5mm,frame=off] % Put letterhead information in here. \starttext \setlayer[Logo][] { \bTABLE \bTR \bTD \eTD \bTD \sc{Company Name}\eTD \bTD \sc{info}(a)\sc{something}.\sc{where} \eTD \eTR \bTR \bTD \eTD \bTD 2059 Forest Ave, Ste X \eTD \bTD \sc{www}.\sc{domain}.\sc{topleveldomain} \eTD \eTR \bTR \bTD \eTD \bTD City, Province \eTD \bTD Tel (xxx) 999-1234 \eTD \eTR \eTABLE } \setupbackgrounds[page][background=Logo] ~ % Need `` to avoid a NULL content page so can generate a pdf \stoptext % % End of minimal example Regards

1 0

Keep Rows together in Natural Tables
by Neal Lester 19 Nov '14

19 Nov '14

Is there a way to keep two rows in a natural table together (on the same page)? Thanks, Neal

1 0

typeface replacement (font fallback)
by Pablo Rodriguez 18 Nov '14

18 Nov '14

Dear list, I have a ConTeXt document that I need to compile in different Windows computers. Some computers are provided with the Gill Sans MT typeface. The rest are provided with the GillSans typeface. Only one source document should exist (it’s actually a template that merges data). The font family substitution could be written as a fallback mechanism: \definefallbackfamily [mainface] [serif] [GillSans] \definefontfamily [mainface] [serif] [Gill Sans MT] Of course I could set range to something like: {basiclatin, latinextendeda, latinextendedadditional, latinextendedb, latinextendedc, latinextendedd, latinsupplement, letterlikesymbols} Is there a more elegant way of doing this? Many thanks for your help, Pablo -- http://www.ousia.tk

1 0

\adaptpapersize doesn't change back
by Pol Stra 18 Nov '14

18 Nov '14

Hello, This message is just for bug report. from wiki, the below example should switch back page 4 in portrait mode, but it doesn't. (ConTeXt ver: 2014.11.17 14:32 MKIV beta) \definepapersize[main] [A4] \definepapersize[extra][A4,landscape] \setuppapersize[main] \starttext Page 1. Portrait \page Page 2. Portrait \page \adaptpapersize[extra] Page 3. Landscape \page Page 4. Portrait \page \stoptext

1 0

enumeration with the Spanish alphabet
by Pablo Rodriguez 17 Nov '14

17 Nov '14

Hans, enumerating using the Spanish alphabet lacks a letter between n and o, the ñ. Here is the small sample that shows the missing letter: \mainlanguage[es] \starttext \startitemize[a] \dorecurse{30}{\item \recurselevel} \stopitemize \stoptext Instead of changing the default letter series, how about adding the ñ (or Ñ) after n and before o (or after N and before O) in a new enumeration series named ñ (and Ñ). This is the correct way to enumerate with letters in Spanish (and this is used in legislation, such as in https://www.boe.es/buscar/act.php?id=BOE-A-1992-28741#a49) Many thanks for your help, Pablo -- http://www.ousia.tk

3 15