October 2014 - ntg-context - NTG Mailing Lists

(again) bug with bidi direction and \about references
by Pablo Rodriguez 12 Aug '15

12 Aug '15

Hi Hans, sorry for telling again, but I’m afraid that the following sample shows a serious buggy interaction between \setupdirections[bidi=on] and \about references. \setupdirections[bidi=on] \starttext \section[sectionone]{Section one} As said in \dorecurse{5} {\about[sectionone]\footnote{Body reference misplaced.}, } \stoptext Both \about and footnote references in body are misplaced. It would be great, if you could fix this. Many thanks for your help, Pablo -- http://www.ousia.tk

4 6

Critical editions with ConTeXt
by MANUEL GONZALEZ SUAREZ 24 Jul '15

24 Jul '15

9 19

next beta
by Hans Hagen 16 Apr '15

16 Apr '15

Hi The next beta will have this (I needed it for a manual): \starttext \starttabulate[||CL{darkred}|CM{darkgreen}CT{white}|CR{darkblue}||] \NC first \NC left \NC middle \NC right \NC last \NC \NR \NC first \NC \color[white]{left} \NC middle \NC \color[white]{right} \NC last \NC \NR \NC first \NC left \NC middle \NC right \NC last \NC \NR \stoptabulate \stoptext i.e. we already had CL CM and CR, so CT is new .. should be wikified. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

6 10

authors in the toc
by Andrea Valle 11 Apr '15

11 Apr '15

Dear all, as I’m working on a book that is a collection of essays by various authors, I need their names in the toc. I’m using mkiv and the command start chapter, in the first argument specifying the author param. I’ve explored the wiki (http://wiki.contextgarden.net/Table_of_Contents) but I don’t get it. Can anyone provide some hints? Thanks a lot! -a- -------------------------------------------------- Andrea Valle -------------------------------------------------- CIRMA - StudiUm Università degli Studi di Torino --> http://www.cirma.unito.it/andrea/ --> http://www.fonurgia.unito.it/andrea/ --> http://www.flickr.com/photos/vanderaalle/sets/ --> http://vimeo.com/vanderaalle --> andrea.valle(a)unito.it -------------------------------------------------- "This is a very complicated case, Maude. You know, a lotta ins, a lotta outs, a lotta what-have-yous." (Jeffrey 'The Dude' Lebowski)

3 10

Define a new command from the command \periods[n]
by Fabrice Couvreur 19 Jan '15

19 Jan '15

Hi, Is it possible to redefine the command \periods[n] to have a line that goes from the end of the word to the edge of the page without having to play on the number n ? Regards, Fabrice \starttext \startitemize[a][stopper=),style=bold] \item $x\mapsto -x^2+x+1$ : \periods[66] \item $x\mapsto 2x^3+4x-7$ : \periods[65] \item $x\mapsto x^2-3$ : \periods[70] \item $x\mapsto \frac{x^2+x}2$ : \periods[72] \item $x\mapsto (x-2)^2$ : \periods[69] \stopitemize \stoptext

6 11

Steps in presentation
by pol stra 03 Jan '15

03 Jan '15

Hello, I tried to use some steps in a presentation. In the following conversation http://www.mail-archive.com/ntg-context@ntg.nl/msg53524.html, Wolfgang says that we can use the pre-60 module. So I tried this snippet: \usemodule[pre-stepwise] \starttext \StartSteps \startitemize \item one \FlushStep \item two \FlushStep \item three \FlushStep \stopitemize \StopSteps \stoptext But it does not compile: ConTeXt ver: 2012.09.11 20:36 MKIV fmt: 2012.9.12 int: english/english system > cont-new.mkiv loaded (/opt/context-minimals/texmf-context/tex/context/base/cont-new.mkiv system > beware: some patches loaded from cont-new.mkiv ) fonts > latin modern fonts are not preloaded languages > language en is active (pre60.tex resolvers > modules > loaded: 'pre-stepwise' (/opt/context-minimals/texmf-context/tex/context/base/s-pre-60.mkiv fonts > beware: no fonts are loaded yet, using 'lm mono' in box (/opt/context-minimals/texmf-context/tex/context/base/java-imp-stp.mkiv) interactions > javascripts > loaded: library 'stp' metapost > loaded: library 'nav' (/opt/context-minimals/texmf-context/tex/context/base/meta-imp-nav.mkiv)){/opt/context-minimals/texmf-fonts/fonts/map/pdftex/context/mkiv-base.map} fonts > preloading latin modern fonts (second stage) fonts > typescripts > unknown: library 'loc' {/opt/context-minimals/texmf-fonts/fonts/map/dvips/lm/lm-math.map}{/opt/context-minimals/texmf-fonts/fonts/map/dvips/lm/lm-rm.map} fonts > virtual math > unable to resolve name mapsfromchar fonts > fallback modern rm 12pt is loaded !LuaTeX error: There should have been a lua <node> here, not an object with type string! ==> Fatal error occurred, no output PDF file produced! Is there something broken in recent release of conteXt? By the way It seems there is no Rawsteps module anymore but it still is in the wiki. Is there is something like a bugtracker for conteXt, in order to signal when a feature is not working or outdated and signal when it is back (or definitly depreciate)? (it would be a complementary tool for the mailing list)

2 1

\preventmode does not work
by Rik 21 Nov '14

21 Nov '14

At least in MKIV. I haven't tried MKII. The following example should demonstrate this. With no mode specified on the command line, this should enable mode three and prevent and disable the other modes. It seems that \preventmode is not only ineffective in what it is described as doing, but also disables the following \disablemode! Or perhaps I am misusing this or misunderstand what it should do. (2014-08-29 20:57 standalone) \definemode[one][keep] \definemode[two][keep] \definemode[three][keep] \define\ModeOne{nil} \define\ModeTwo{nil} \define\ModeThree{nil} \startmode[one] \define\Mode{one} \define\ModeOne{set} \disablemode[two,three] \stopmode \startmode[two] \define\Mode{two} \define\ModeTwo{set} \disablemode[one,three] \preventmode[one] \stopmode \startnotmode[one,two] \define\Mode{three} \define\ModeThree{set} \enablemode[three] \preventmode[one,two] \disablemode[one,two] \stopnotmode \starttext Mode is \Mode. ModeOne is \ModeOne. ModeTwo is \ModeTwo. ModeThree is \ModeThree. Mode \doifmode{one}{one}\doifmode{two}{two}\doifmode{three}{three} is active. \stoptext -- Rik Kabel

3 2

clipping in metafun has weird side effects
by Tobias Columbus 02 Nov '14

02 Nov '14

Dear all, I stumbled upon some very weird behaviour of clipping in metafun/context. When I add some clipped pictures to currentpicture and draw something dashed, some subsequent lines will also be drawn dashed. This behaviour only shows up with context but not with mptopdf or mpost. I attached a minimal example and the corresponding output of context and mptopdf. I tried context versions 2014.05.21 22:04 and 2014.10.29 17:47, but the result is the same in both. Tobias --

2 8

\placetable whitespace problem in columnset
by Bryor Snefjella 31 Oct '14

31 Oct '14

I have a document using columnsets to place tables near an entry in a long list of sorts. The problem is that wherever I issue a \placetable \placefigure etc command, I get unwanted extra whitespace between entries where the command is issued. I have tried changing the parameters in \setupfloats, but haven't found a setting that works. I'm using the context version distributed with the latest texlive. You can see the extra whitespace between entry Q and R in this example. \definecolumnset[TwoColumns][n=2,distance=0.04\makeupwidth] \setupindenting[yes, small] \setupfloats[before=,after=] \definedescription [MyEntry][alternative=serried,width=fit,before=\indentation,indenting=yes] \unexpanded\def\MyCommand#1#2#3% {\startMyEntry{\bi#2:}#3\stopMyEntry} \definesorting[My][Mys] \starttext \startcolumnset[TwoColumns] \definecolumnsethsize{TwoColumns}{1}{1}\One \startbuffer \placetable[lrtb][tab:mytable]{My Table}{ \bTABLE[option=stretch,textwidth=\One,align=middle] \bTR\bTH Foo \eTH\bTH Bar \eTH\eTR \bTR\bTD Bar \eTD\bTD Foo \eTD\eTR \bTR\bTD Foo \eTD\bTD Bar \eTD\eTR \eTABLE} \stopbuffer \My[Q]{\input knuth\getbuffer} \My[R]{\input knuth} \My[C]{\input knuth} \My[A]{\input knuth} \placelistofsorts[My][criterium=all,command=\MyCommand] \stopcolumnset \stoptext

1 0

Package {tikz-cd} with ConTeXt
by Fabrice Couvreur 28 Oct '14

28 Oct '14

Hi, The following code compiles with pdflatex : \documentclass{article} \usepackage{tikz} \usepackage{tikz-cd} \usetikzlibrary{3d,shapes} \begin{document} \tikzset{xzplane/.style={canvas is xz plane at y=#1, thick,shading=ball,ball color=red,draw=black}} \tikzset{yzplane/.style={canvas is yz plane at x=#1,thick,shading=ball, ball color=red,draw=black}} \tikzset{xyplane/.style={canvas is xy plane at z=#1,thick,shading=ball,ball color=red,draw=black}} \tikzcdset{ arrow style=tikz, diagrams={>=stealth}} \[\begin{tikzcd} \tikz{\draw[xzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[yzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] node[white] at (1,1){\Large 7}; \draw[xyplane=2] node[below=0.25cm] at (1,0){\Large X};} \arrow[thick, bend left, start anchor = north, end anchor = north, shorten >=1mm]{r}[scale=2]{\times 2} &\tikz{\draw[xzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[yzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] node[white] at (1,1){\Large 14}; \draw[xyplane=2] node[below=0.25cm] at (1,0) {\Large X};} \arrow[thick, bend left, start anchor = north, end anchor = north, shorten <= 1mm]{r}[scale=2]{+ 3} &\tikz{\draw[xzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[yzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] node[white] at (1,1){\Large 17}; \draw[xyplane=2] node[below=0.25cm] at (1,0){\Large X};} \end{tikzcd}\] \begin{tikzpicture} \tikzstyle {bulle}=[circle,draw,thick] \tikzstyle{fleche}=[thick,>=stealth,->] \node(debut1) at (0,0) {$7$}; \node(debut3) at (4,0) {$14$}; \draw [fleche](debut1.north) to [bend left] (debut3.north); \node [bulle,fill=white] (debut6) at (2,0.75) {$\times 2$}; \end{tikzpicture} \end{document} I tried with Context, but it does not work : \usemodule[tikz] \usetikzlibrary[calc] \usetikzlibrary[cd] \usetikzlibrary[3d] \usetikzlibrary[arrows] \usetikzlibrary[positioning] \starttext \tikzset{xzplane/.style={canvas is xz plane at y=#1, thick,shading=ball,ball color=red,draw=black}} \tikzset{yzplane/.style={canvas is yz plane at x=#1,thick,shading=ball, ball color=red,draw=black}} \tikzset{xyplane/.style={canvas is xy plane at z=#1,thick,shading=ball,ball color=red,draw=black}} \tikzcdset{ arrow style=tikz, diagrams={>=stealth}} \starttikzcd \tikz{\draw[xzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[yzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] node[white] at (1,1){ 7}; \draw[xyplane=2] node[below=0.25cm] at (1,0){X};} \arrow[thick, bend left, start anchor = north, end anchor = north, shorten >=1mm]{r}[scale=2]{$\times 2$} &\tikz{\draw[xzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[yzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] node[white] at (1,1){ 14}; \draw[xyplane=2] node[below=0.25cm] at (1,0) {X};} \arrow[thick, bend left, start anchor = north, end anchor = north, shorten <= 1mm]{r}[scale=2]{+ 3} &\tikz{\draw[xzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[yzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] node[white] at (1,1){ 17}; \draw[xyplane=2] node[below=0.25cm] at (1,0){X};} \stoptikzcd \stoptext Best regards, Fabrice

1 0