ntg-context May 2011

ntg-context@ntg.nl

80 participants
205 discussions

line numbers in margin from xml in context mkiv
by Jon Crump 27 May '11

27 May '11

Hans, et alia, Thanks for mentioning typo-mar.mkiv. Once I found it, and figured out what to do with it (put it in my texmf-local directory), it appears to, as you say, "offer more control over margindata". My (rather belated) thanks for offering this extended functionality, though my grasp of context is still too fragile to really understand how to use it. typo-mar.mkiv appears to introduce a bug in my Arabic typesetting. In my bilingual text, my margin data (pg/lb numbers) are placed correctly in the margin of the English text, but the margins of the Arabic text appear to be miscalculated and the margindata overwrites the beginnings of the lines (or disappears beyond the edge if I set margin 'left'). My tyronic fooling around may certainly be at fault, but if you could offer any observations on the following, I'd be grateful. ConTeXt ver: 2011.04.24 15:15 MKIV My environment file is included below, stripped down as far as I could to its essentials. I've attached the ara-style.tex file setting up ScheherazadeRegOT; a stripped down example of my tei/xml source; and the pdf output I'm getting. I hope I violate no convention of the list in attaching these files, but in my naivete I'm not sure how much information is too much. \startxmlsetups xml:teisetups \xmlsetsetup{#1}{*}{-} \xmlsetsetup{#1}{body|p|pb|lb|}{xml:*} \xmlsetsetup{#1}{div[@xml:id='apr_arab']}{xml:div:arab} \xmlsetsetup{#1}{div[@xml:id='apr_engl']}{xml:div:engl} \xmlsetsetup{#1}{pb}{xml:pb} \xmlsetsetup{#1}{lb}{xml:lb} \stopxmlsetups \xmlregistersetup{xml:teisetups} \environment ara-sty \usetypescript[palatino] \setupbodyfont[palatino,10pt] \startxmlsetups xml:body \xmlflush{#1} \stopxmlsetups \startxmlsetups xml:p \xmlflush{#1} \stopxmlsetups \startxmlsetups xml:pb \xmlflush{#1} \stopxmlsetups \startxmlsetups xml:lb \MarText{\tfxx{xml pb/lb numbers}} \xmlflush{#1} \stopxmlsetups \definemargindata [MarText][right][color=red] \startxmlsetups xml:div:arab \setarabic{\switchtobodyfont[Arabic] \xmlflush{#1}} \stopxmlsetups \startxmlsetups xml:div:engl \setlatin{\switchtobodyfont[palatino, 12pt] \xmlflush{#1}} \stopxmlsetups On Wed, Apr 27, 2011 at 4:28 AM, Hans Hagen <pragma(a)wxs.nl> wrote: > On 27-4-2011 1:26, Jon Crump wrote: >> >> All, >> >> After being away from my project for a while I returned to find that >> something that worked now no longer does. I updated the minimals on my >> Mac and context is running as I would expect: >> >> jjc% context --version >> mtx-context | main context file: >> /Users/jjc/context/tex/texmf-context/tex/context/base/context.mkiv >> mtx-context | current version: 2011.04.24 15:15 >> >> But now, while running my environment.tex file against my target >> TEI/xml file context complains: >> >> ! Undefined control sequence. >> l.77 \defineinmargin >> [lineNumbers] [normal] >> ? > > see typo-mar.mkiv ... more control over margindata and new commands > > Hans > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com > | www.pragma-pod.nl > ----------------------------------------------------------------- >

1 0

compresslevel and png graphics (mkiv)
by Peter Rolf 27 May '11

27 May '11

Hi, I just made a one pager (TEXpage) out of a big png graphic (5900x4094). The compressed size of the graphics is normally around 1.37MB on the highest png compress level (9) and 1.32MB after using optipng (only around 3% reduction this time). To my surprise the size of the final PDF was about 2.3MB. After adding '\pdfcompresslevel9' the size went down to 1.48MB. Still not what I wanted... So I was wondering: is there an option to embed the png graphic as it is (no re-compression)? Otherwise the time consuming usage of optipng would be a complete waste of time. Believe it or not, but size matters :-) MTXrun | current version: 2011.01.26 11:02 This is LuaTeX, Version beta-0.71.0-2011051112 (rev 4257) Greetings, Peter

9 20

\definehead \setuphead new type included in a list such as TOC
by Mathieu DUPONT 27 May '11

27 May '11

Hi, In the following example, I define 2 new heads, and I want them to : 1- inherits from Title (or Chapter would be fine)2- show in the TOC3- not be counted (CHAPTER should be 1) Is there an option I can put into \setuphead[Abstract][] so it gets included in the TOC ?That would be the easiest way of getting the three desired results. Thanks ! \definehead[Abstract][title]\setuphead[Abstract][]\definehead[Intro][title]\setuphead[Intro][] \starttext \startfrontmatter\placecontent\Abstract{ABSTRACT}\stopfrontmatter \startbodymatter\Intro{INTRODUCTION}\chapter{CHAPTER}\stopbodymatter \stoptext Mathieu

2 2

TOC : Chapter title under its number (separate lines)
by Mathieu DUPONT 27 May '11

27 May '11

Hi, Is there a simple way to obtain the following result in the table of content : ContentsCHAPTER 1Title of chapter 21.1 Title of section 2 (the chapter title underneath its number and left aligned, just like everything else) The following code used to do the job with MkII but it doesn't anymore with MkIV : \setuplabeltext[chapter=CHAPTER~]\setuplist[chapter][label=yes, style={\blank[0cm]}] \starttext \startfrontmatter\completecontent\stopfrontmatter \startbodymatter\chapter{Title of chapter}\section{Title of section}\stopbodymatter \stoptext Instead, I get something like this (I hope it turns out readable through the email) : Contents CHAPTER 1 Title of chapter 21.1 Title of section 2 where the 2 lines of the chapter, together with their alignment with the frame, get tossed to the right... Thanks in advance ! Mathieu

3 15

\asciimode and cld
by pmlists＠free.fr 27 May '11

27 May '11

Hello, How can one use \asciimode in cld syntax? This does not seem to work: context.starttext() context.asciimode() context"bla % bla" context.stoptext() TIA for any hints! -- Peter

2 2

[metafun] graphictext in mkiv
by Marco 27 May '11

27 May '11

The »graphictext« makro does not work in mkiv, is it a bug or intended? This example works in mkii: \starttext \startMPcode draw image(graphictext "FooBar" scaled 8); \stopMPcode \stoptext Marco

1 0

checking mainlanguage setup
by Jeong Dalyoung 27 May '11

27 May '11

Dear all, Is it possible to check what is the mainlanguage set in document? Now, I use \enablemode[kr] to do something A. But, I'd like to do it automatically if possible. For example, I'd like to do the following type of setup. if mainlanguage == kr then do something A elseif mainlanguage == en then do something B else do something C endif So, if \mainlanguage[kr] is set, then do A, and etc. Thank you for reading. Best regards, Dalyoung

4 3

Why \goto not wok in ConTeXt in Win7
by 王雨施 27 May '11

27 May '11

Hi, everyone , I use the newest ConTeXt in Win7 , the version information as follow mtx-context | main context file: d:/context/tex/texmf-context/tex/context/ba se/context.mkiv mtx-context | current version: 2011.05.06 16:52 When I use goto in my document , it does not work, like the following, can anyone help me. Thanks I use context --mode=screen test to compile the document \starttext \title[content]{mulu} \placecontent \chapter{One} \setuppagenumbering [style=\tfx, location=] \startmode[screen] \switchtobodyfont[8pt] \setupfootertexts [{haha}][{\goto{back}[content]}] [{\goto{back}[content]}][{haha}] \stopmode \input knuth \chapter{Two} \input knuth \chapter{Three} \input knuth \stoptext

2 1

\crlf breaks alignment inheritance
by Marco Pessotto 26 May '11

26 May '11

Hello there! I've found a problem with the latest ConTeXt, but I guess it's been present for a while. See the following example: %%%% cut here %%%% \starttext \startalignment[middle,nothyphenated,nothanging,stretch] centered \startalignment[hyphenated] this is centered. No problem \stopalignment \startalignment[hyphenated] Why this is not centered?\crlf Becaouse of the \textbackslash crlf \stopalignment \startalignment[hyphenated, middle] this is centered. \crlf No problem \stopalignment centered \stopalignment regular \stoptext %%%% cut here %%%% Best wishes -- Marco

2 8

Removing page numbering on the first page of a list such as the TOC
by Mathieu DUPONT 26 May '11

26 May '11

Hi, I can't find out how to remove the header on the first page of a list, e.g the TOC. \setuphead[content][header=empty] won't do anything. Anyone has an idea ? Thanks. Mathieu

2 2

← Newer
1
2
3
4
5
6
7
...
21
Older →

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

ntg-context May 2011