March 2011 - ntg-context - NTG Mailing Lists

Minimals only a third from texlive
by Cecil Westerhof 14 Mar '11

14 Mar '11

I removed my distributions texlive from my system. This gave back 660 MB. Installing minimals took 223 MB. But I understood that minimals is more then texlive. So why is it a lot smaller? -- Cecil Westerhof

2 1

Re: [NTG-context] lang-wrd.lua - howto count 1-, 2-, and 3-letter words?
by Reviczky, Adam 14 Mar '11

14 Mar '11

>> So I tried to set "words.threshold = 4" in context/base/lang-wrd.lua to smaller values but this does not change anything. You have to regenerate the formats too, after you changed the value. Otherwise you could use directly in your document: \ctxlua{languages.words.threshold=1} Adam

2 1

Re: [NTG-context] Is Minimals ready for non-developers to use? (Tom)
by Jeong Dalyoung 14 Mar '11

14 Mar '11

Dear Tom, I am sorry that my experience is not help for you. I am usning Mac OS X. I just downloaded first-setup.sh and run it. Then it installs minimal and makes formats well. Minimal's current version: 2011.02.25 22:03 This is LuaTeX, Version beta-0.65.0-2010121316 However, I believe that Mojca's suggestion will relieve you from the install problem. Hope you succeed to install stable ConTeXt. Best regards, Dalyoung

3 2

math spacing
by Hans van der Meer 14 Mar '11

14 Mar '11

It might be that I am missing something here. But I don not understand why in the math expression below the spacing behind the letters is different. With this behaviour it seems impossible to name a variable PYR and have it typeset as such. Hans van der Meer \starttext $\tfd Q,Y,N,P,Y,Z \quad PYR$ \stoptext ConTeXt ver: 2011.02.25 22:03 MKIV fmt: 2011.3.11 int: english/english

4 5

Re: [NTG-context] Is Minimals ready for non-developers to use?
by Jeong Dalyoung 14 Mar '11

14 Mar '11

Dear Tom, good to hear that minimal is working fine. > I had the same experience that you had with the Introduction not showing up > in the TOC. Do you know how to report a bug? I think that completecontent doesn't recognize the user defined "intro". It is all what I can tell you. If you have no special reason to define \intro, you may use \chapter to make it appear in TOC. This mailing list is a place to report a bug. If it is a real bug, then Hans will correct it, otherwise many experts who are watching mails suggest you a good solution. Thanks, Best regards, Dalyoung

1 0

lang-wrd.lua - howto count 1-, 2-, and 3-letter words?
by Florian Wobbe 14 Mar '11

14 Mar '11

Hi, I'd like to ask an early question again in a different way: I need to count every word in a document but lang-wrd.lua counts only words with 4+ letters. So I tried to set "words.threshold = 4" in context/base/lang-wrd.lua to smaller values but this does not change anything. I don't know where to start looking. Also I am searching for a non-global solution without changing the core files. Thanks! Florian

1 0

Simplefonts
by Charles Doherty 14 Mar '11

14 Mar '11

Dear Wolfgang, I sent an e-mail about problems with my simplefonts. I got no reply since my example had fonts that were probably not available to you. But the problem does not relate to the Gaelic fonts that I had been using. I am sending this file instead. The fonts below can be swapped about. The main font is always typeset as requested but the others are not. Am I doing something really silly? The readout from the console is below. I am using Context Minimals MarkIV on a Mac. Help would be appreciated. Thanks, Charlie \usemodule[simplefonts] % load the module \setmainfont[TeX Gyre Adventor] \starttext Hello World \blank[big] \simplefont[TeX Gyre Heros] \blank[big] \simplefont[Zapfino] Hello World \stoptext The argument "/Users/charlesdoherty/Documents/TestFolder/Untitled.tex" is not a valid TEXROOT path. (There is no file "/Users/charlesdoherty/Documents/TestFolder/Untitled.tex/texmf/tex/plain/base/plain.tex") mtx-context | run 1: luatex --fmt="/Users/charlesdoherty/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/cont-en" --lua="/Users/charlesdoherty/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/cont-en.lui" --backend="pdf" "./Untitled.tex" This is LuaTeX, Version beta-0.65.0-2010121316 \write18 enabled. (Untitled.tex ConTeXt ver: 2011.02.25 22:03 MKIV fmt: 2011.3.8 int: english/english system > cont-new.mkiv loaded (/Users/charlesdoherty/context/tex/texmf-context/tex/context/base/cont-new.mkiv system > beware: some patches loaded from cont-new.mkiv ) system > Untitled.top loaded (Untitled.top) fonts > latin modern fonts are not preloaded languages > language en is active resolvers > modules > loaded: 'simplefonts' (/Users/charlesdoherty/context/tex/texmf-context/tex/context/third/simplefonts/t-simplefonts.tex loading > ConTeXt User Module / Simplefonts <+ /Users/charlesdoherty/context/tex/texmf-context/tex/context/third/simplefonts/t-simplefonts.lua>) fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes fonts > names > font database has matching configuration and file hashes (/Users/charlesdoherty/context/tex/texmf-context/tex/context/base/type-siz.mkiv) (/Users/charlesdoherty/context/tex/texmf-context/tex/context/base/type-otf.mkiv){/Users/charlesdoherty/context/tex/texmf/fonts/map/dvips/lm/lm-math.map}{/Users/charlesdoherty/context/tex/texmf/fonts/map/dvips/lm/lm-rm.map}{/Users/charlesdoherty/context/tex/texmf-context/fonts/map/pdftex/context/mkiv-base.map} system > begin file Untitled.tex at line 5 backend > xmp > using file '/Users/charlesdoherty/context/tex/texmf-context/tex/context/base/lpdf-pdx.xml' pages > flushing realpage 1, userpage 1, subpage 1 system > end file Untitled.tex at line 20 )</Users/charlesdoherty/context/tex/texmf/fonts/opentype/public/lm/lmromanunsl10-regular.otf></Users/charlesdoherty/context/tex/texmf/fonts/opentype/public/tex-gyre/texgyreadventor-regular.otf> mkiv lua stats > used config file - selfautoparent:/texmf/web2c/texmfcnf.lua mkiv lua stats > used cache path - /Users/charlesdoherty/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e mkiv lua stats > input load time - 0.009 seconds mkiv lua stats > stored bytecode data - 275 modules, 56 tables, 331 chunks mkiv lua stats > loaded tex modules - 1 requested, 1 found (*-simplefonts), 0 missing mkiv lua stats > cleaned up reserved nodes - 33 nodes, 9 lists of 411 mkiv lua stats > node memory usage - 19 glue_spec mkiv lua stats > node list callback tasks - 6 unique task lists, 5 instances (re)created, 4069 calls mkiv lua stats > used backend - pdf (backend for directly generating pdf output) mkiv lua stats > loaded patterns - en::2 mkiv lua stats > callbacks - 4210 direct, 3743 indirect, 7953 total mkiv lua stats > randomizer - resumed with value 0.83236534513178 mkiv lua stats > lxml preparation time - 0.000 seconds, 0 nodes, 15 lpath calls, 0 cached calls mkiv lua stats > result saved in file - Untitled.pdf mkiv lua stats > loaded fonts - 16 files: stmary10.afm lmmono10-regular.otf lmroman10-bold.otf lmroman10-regular.otf lmromanunsl10-regular.otf lmsans10-regular.otf texgyreadventor-regular.otf eufb10.tfm eufm10.tfm msam10.tfm msbm10.tfm lmex10.tfm lmmi10.tfm lmmib10.tfm lmsy10.tfm rm-lmr10.tfm mkiv lua stats > fonts load time - 0.241 seconds mkiv lua stats > luatex banner - this is luatex, version beta-0.65.0-2010121316 mkiv lua stats > control sequences - 30184 of 165536 mkiv lua stats > current memory usage - 38 MB (ctx: 39 MB) mkiv lua stats > runtime - 0.886 seconds, 1 processed pages, 1 shipped pages, 1.129 pages/second system | total runtime: 1.175

3 2

Beside blank with 1 or 2, how to do it with 1.5
by Cecil Westerhof 14 Mar '11

14 Mar '11

I would like to do something like: \setuphead[section][before={\blank[1.5*big] \testpage[12]}] This does not work. I get: to be read again> * <argument> 1.5* big \addaskedblankskip ...nce \blankskip #1\dimexpr #2 \relax But I can do: \setuphead[section][before={\blank[2*big] \testpage[12]}] How to implement what I want? -- Cecil Westerhof

2 4

Using bookmarks
by Cecil Westerhof 14 Mar '11

14 Mar '11

I am using: \placebookmarks[part,chapter,section][part,chapter] \setupinteractionscreen[option=bookmark] When I have the PDF file displayed fill window width and I click on a section. The page where this section is on, is displayed in full page. I would prefer the zoom level would stay the same and the start of the section would be displayed at the top of the page. Is this possible? -- Cecil Westerhof

1 0

Why does bookmarks show also sections
by Cecil Westerhof 14 Mar '11

14 Mar '11

I use: \placebookmarks[chapter,section][chapter] \setupinteractionscreen[option=bookmark] As I understand it there should be bookmarks generated for chapters and sections. When opening the document only the bookmarks for chapters should be shown. But all bookmarks are shown. What is going wrong? -- Cecil Westerhof

3 8