November 2007 - ntg-context - NTG Mailing Lists

TABLE splitting on entry spanning multiple rows
by Santy, Michael 20 Nov '07

20 Nov '07

Hello, I'm using ConTeXt as part of an XML->PDF workflow that is heavy on tables. The XML table model allows cells to span rows and columns. While ConTeXt has handled row/column spanning perfectly up to this point, I believe I have found an issue. When an entry that spans multiple rows is on the split point between pages, you get ragged entries on the page boundaries. The code below demonstrates this on live.contextgarden.net (PDFTex): \starttext \setupTABLE[row][odd][background=color,backgroundcolor=red, width=.2\textwidth] \bTABLE[split=yes] \dorecurse{31}{\bTR \bTD[nc=4] filler \eTD \eTR} \bTR \bTD[nr=3] 1 \eTD \bTD[nc=2] 2/3 \eTD \bTD[nr=3] 4 \eTD \eTR \bTR \bTD 2 \eTD \bTD 3 \eTD \eTR \bTR \bTD 2 \eTD \bTD 3 \eTD \eTR \bTR \bTD[nc=3] 1/2/3 \eTD \bTD 4 \eTD \eTR \bTR \bTD 1 \eTD \bTD 2 \eTD \bTD 3 \eTD \bTD 4 \eTD \eTR \eTABLE \stoptext Does anyone have any suggestions for visually cleaning this up? Cheers, Mike

1 0

Context and Lilypond on Miketex with TeXnicCenter
by u-wrede＠t-online.de 19 Nov '07

19 Nov '07

Hallo I use MikeTex TeXnicCenter for writing Context with Lilypond. When I try this: \usemodule[lilypond] \starttext There are some notes \lilypond{\relative{bes a c b}} embedded in this line. \stoptext then I get this: This is pdfeTeX, Version 3.141592-1.30.6-2.2 (MiKTeX 2.5) (preloaded format=cont-en 2007.11.11) 14 NOV 2007 08:28 entering extended mode **C:/LaTeX1.tex \emergencyend (C:\LaTeX1.tex ConTeXt ver: 2007.09.28 16:52 MKII fmt: 2007.11.11 int: english/english language : language en is active system : cont-new loaded ("C:\Programme\MiKTeX 2.5\tex\context\base\cont-new.tex" systems : beware: some patches loaded from cont-new.tex ("C:\Programme\MiKTeX 2.5\tex\context\base\cont-new.mkii") ("C:\Programme\MiKTeX 2.5\tex\context\base\cont-mtx.tex")) system : cont-old loaded ("C:\Programme\MiKTeX 2.5\tex\context\base\cont-old.tex" loading : Context Old Macros ) system : cont-fil loaded ("C:\Programme\MiKTeX 2.5\tex\context\base\cont-fil.tex" loading : Context File Synonyms ) system : cont-sys.rme loaded ("C:\Programme\MiKTeX 2.5\tex\context\user\cont-sys.rme" ("C:\Programme\MiKTeX 2.5\tex\context\base\type-tmf.tex") ("C:\Programme\MiKTeX 2.5\tex\context\base\type-siz.tex") ("C:\Programme\MiKTeX 2.5\tex\context\base\type-one.tex") ("C:\Programme\MiKTeX 2.5\tex\context\base\type-akb.tex")) bodyfont : 12pt rm is loaded language : patterns en->ec:ec->1->2:3 uk->ec:ec->2->2:3 de->texnansi:tex nansi->3->2:3 de->ec:ec->4->2:3 fr->texnansi:texnansi->5->2:3 fr->ec:ec->6->2:3 es->ec:ec->7->2:3 pt->texnansi:texnansi->8->2:3 pt->ec:ec->9->2:3 it->texnansi :texnansi->10->2:3 it->ec:ec->11->2:3 nl->texnansi:texnansi->12->2:3 nl->ec:ec- >13->2:3 cz->il2:il2->14->2:3 cz->ec:ec->15->2:3 sk->il2:il2->16->2:3 sk->ec:ec ->17->2:3 pl->pl0:pl0->18->2:3 pl->ec:ec->19->2:3 pl->qx:qx->20->2:3 loaded specials : tex,postscript,rokicki loaded system : LaTeX1.top loaded (C:\LaTeX1.top specials : loading definition file tpd ("C:\Programme\MiKTeX 2.5\tex\context\base\spec-tpd.tex" specials : loading definition file fdf ("C:\Programme\MiKTeX 2.5\tex\context\base\spec-fdf.tex" ("C:\Programme\MiKTeX 2.5\tex\context\base\spec-fdf.mkii")) specials : fdf loaded ) specials : fdf,tpd loaded ) systems : system commands are disabled system : module lilypond loaded ("C:\Programme\MiKTeX 2.5\tex\context\lilypond\t-lilypond.tex" loading : LilyPond module ) (C:\LaTeX1.tuo) (C:\LaTeX1.tuo) (C:\LaTeX1.tuo) (C:\LaTeX1.tuo) (C:\LaTeX1.tuo) (C:\LaTeX1.tuo) (C:\LaTeX1.tuo) (C:\LaTeX1.tuo) (C:\LaTeX1.tuo) (C:\LaTeX1.tuo) ("C:\Programme\MiKTeX 2.5\tex\context\base\sort-lan.tex" loading : Context Sorting Macros (languages) ("C:\Programme\MiKTeX 2.5\tex\context\base\sort-lan.mkii")) (C:\LaTeX1.tuo) (C:\LaTeX1.tuo) systems : begin file LaTeX1 at line 3 ! Bad number (18). \dodostartlilypond ...lily!figures ]\fi \ifeof 18 \expanded {\installprogram... l.4 ... some notes \lilypond{\relative{bes a c b}} embedded in this line. ? I would be nice, to get some help Thank You Ulrich -- This message was sent on behalf of u-wrede(a)t-online.de at openSubscriber.com http://www.opensubscriber.com/messages/ntg-context@ntg.nl/topic.html

4 4

help about the EXAMPLE framework
by Fabrice Gaudier - CEA/DEN/SFME 19 Nov '07

19 Nov '07

Hello, I'ld like using the tex client/server (called in the past exampler ) described in the wiki page http://wiki.contextgarden.net/Cont-exa.zip. But the document http://www.pragma-ade.com/general/manuals/ex-gui.pdf is not uptodate because I don't find the "exampler" ruby script. I find the script wwwserver, I miss a step to install this tool properly. Have you an uptodate document which explained how to install and use these application. Best regards, Fabrice gaudier

1 0

Re: [NTG-context] Context and Lilypond on Miketex with TeXnicCenter
by Mojca Miklavec 19 Nov '07

19 Nov '07

On 11/19/07, Ulrich Wrede wrote: > I use file=t-lilypond version=2007.09.02. I think this is the > latest one. > > From the log file: > ------------------------------------------------------------ > system : module lilypond loaded > ("C:\Programme\MiKTeX 2.5\tex\context\lilypond\t-lilypond.tex" > loading : LilyPond module > ----------------------------------------------------------- > LilyPond is found and loaded I think. > But this error message is still there > ------------------------------------------------------------ > ! Bad number (18). > \dodostartlilypond ...lily!figures ]\fi \ifeof 18 > \expanded > {\installprogram... > l.32 \stoplilypond > ------------------------------------------------------------ > > Perhaps it has something to do with \write 18 Yes, it indeed seems so. > This comment is written in t-lypond.tex > > %D If \type{\ifeof18} creates an error for you, your pdfetex is too old. > %D just change it to \iftrue then. (\type{\ifeof18} checks whether > \type{\write18} > %D is disabled.) > %D > The last changes of my pdfetex 16. November 2007, 11:02:39 pdfeTeX has been replaced by pdfTeX (pdfeTeX is only a symlink). It's not the file date which matters, but the version (pdfTeX --version). Wiki claims that some things have changed in pdfTeX 1.30, and MikTeX site claims that MikTeX 2.5 uses 1.30.6, so theoretically it should work, but who knows. Also: "The availability of MiKTeX 2.5 ends some time in the not so distant future: as of a fixed date it will not be possible to install packages from the remote package repository." > If I right, metapost is using the same mechanism as lilypond. Metapost/metafun uses some workarounds (i.e.: metapost works even when write18 is disabled). There are multiple ways to check if write18 is disabled (some functionality to check that has only beed added recently to pdfTeX, so it's quite possible that you have an old pdfTeX, or, it's quite possible that MikTeX behaves slightly differently - http://www.ctan.org/tex-archive/macros/latex/contrib/gnuplottex/ has some \ifmiktex switches in the source code, although I'm not sure if they make any sense apart from checking if one should use "touch" or "echo" to write into file). So I would suggest you to try two things: - try to follow the instructions to enable write18: http://wiki.contextgarden.net/Windows_Installation#write18 http://wiki.contextgarden.net/write18 - try to do what the file says: change all occurencies of \ifeof18 to \iftrue (or \iffalse - depending on whether write18 is enabled or not), since it might be that your pdfTeX doesn't support the current syntax, or it might be that something else weird is happening. I have no MikTeX here at the moment, so I cannot try, but on a completely unrelated subject: I remember that while I was stil trying to enable that module on windows (at the time when it came to existance), lilypond didn't run properly unless called with full path (i.e.: one had to call C:\programs\lilypond\bin\lilypond.exe, since calling only "lilypond" didn't work). Lilypond developers said that they didn't know how to fix that, but I hope that it has been resolved in the meantime. Mojca

1 0

Context Minimal for Windows installer
by Vyatcheslav Yatskovsky 18 Nov '07

18 Nov '07

Hello, I appreciate your efforts of creating "context-setup-mswin", but I always had my own way of setting up Context. Today I created full-weight InnoSetup installer. My installer is native Windows application. It fetches files from contextgarden using rsync, then sets variables directly in registry, making Context binaries Windows-wide functional. (Call texexec from any application without need of setuptex.bat file). http://rapidshare.com/files/70450795/ContextMinimalSetup.exe I have tested it only with Luatex engine, but other may work as well. Hope it will facilitate Context usage on Windows. Fell free to ask questions and make suggestions. Best regards, Vaytcheslav Yatskovsky

3 2

Re: [NTG-context] Context Minimal for Windows installer
by Mojca Miklavec 18 Nov '07

18 Nov '07

On 11/18/07, Vyatcheslav Yatskovsky wrote: > Hello Mojca, > > Thank you for svn account. Where do you think I should place my installer? I'll drop you a note on a privite mail. > > A wishlist for Vyatcheslav (although I cannot test): > > - it would be nice if the installer would first ask the user for the > > location of minimals > > It's easy, I'll start with it. Thanks. > > - then, you need to download (or include in the zip) the rsync > > binaries and put them into PATH, that path might be a separate one > > (distinct from ConTeXt bin in any case) > > Now rsync is bundled with installer. (I think it changes rarely, so if it will, I'll better update the installer.) if user selects default folder (c:\contextminimal), he gets the following structure: > > Directory of C:\contextminimal > > 11.11.2007 04:36 <DIR> mswin > 31.01.2007 11:33 1 873 811 cygwin1.dll > 07.11.2006 09:26 283 136 rsync.exe > 30.05.2006 16:18 118 784 SetEnv.exe > 18.11.2007 01:12 691 481 unins000.exe > 18.11.2007 01:12 6 452 unins000.dat > > So, installer-related binaries are located in root installations folder, while Contexts sits in mswin subfolder. OK, rsync should come with it, and true: it doesn't change so often. > > - can you please take a look into > > http://minimals.contextgarden.net/setup/mswin/ and try to reproduce > > the behaviour of first-setup.bat. You might need some binaries already > > present, but it would be nice to get rid of the need for > > http://minimals.contextgarden.net/minimals/ (even though I will > > probably keep providing them) - so, it would be nice if you could call > > mtx-update instead of syncing the whole folder > > - if you use mtx-update.lua, you can ask the user to select the > > desired engines,, the desired modules (probably not implemented yet), > > and the user is also able to choose ConTeXt distribution (to roll back > > if the latest one causes problems), and choose wheather to clean old > > files or not; the functionality provided in mtx-update might improve > > and/or change, but it might be a good idea to keep you informed, it's > > only that the minimals are still in development phase, so they're not > > quite stable yet and paths might still change > > Hmm.. I never used mtx-update, and, moreover, my experiments with mixing installer scripts with lua scripts failed so far (I cound't make format files from it). Can you try it once more? http://minimals.contextgarden.net/setup/mswin/ is really minimalistic,so you can probably figure out what's going on (or ask in case you have problems) and try to reproduce it (you can first call rsync to fetch the needed binaries and scripts, and then call mtx-update properly). mtx-update should now be able to create formats when called with "--make" (depending on the engins you select to download). > If mtx-update is so powerful, let it be the base of your installer, but I'd rather keep my simple and "pop", satisfying needs of non-advanced users (like me). It might not be *so powerful* yet, but it would then be equivalent with the "plain way" of setting things up, and it would be easier for you later to add a checkbox into your installer if some functionality in mtx-update is extended. > BTW, InnoSetup allows to write very flexible scripts using build-in Pascal, so I can always duplicate most needed functionality on it, and I will be 100% confident that it will work on 100% of machines. :) I believe that. But mtx-update should work on all machines as well (if it doesn't, it should better be fixed). But it would really make sense not to depend on precompiled "full minimals" since you loose most control of what should be included and what not. If you > Rsyncing the whole folder will not be necessary when I implement selection of "components". Then the user can select what to download and what to not (fonts, etc.) I'd be very thankful if you point me out some obvious components that user might exclude from set up. > > > - it would be nice to have "enable minimals/disable minimals" switch, > > so that one can theoretically run MikTeX in parallel (when the > > distribution is enabled, it shadows MikTeX, when it's disabled, MikTeX > > will run normally) > > Yeah, but know very well that making Contest work in global way requires not only enabling its settings, but disabling MikTeX settings... OK, I didn't know that. What exactly do you need to do (which MikTeX components/settings do you need to disable) if you want to enable "minimal ConTeXt"? > So it would be troublesome, and I believe that person having both packages should better use conventional installer, like yours. But in that case any "comfortable windows user" would still be greatuf for an "installer", even if its sole reason is to ask the user for the destination of the distribution, and to download the necessary files. So, everything can remain the same, but you don't need to set eny environmental variables, you only create a batch file called "enablecontext.bat" or similar somewhere in PATH (or in some place that you place into PATH), with the contens: C:\Programs\context\setuptex.bat C:\Programs\context depending on where the user decided to install ConTeXt. So, when someone is in console and types in enablecontext, the environment will be set up properly. That was the approach I've been using when working on windows. (When I think about it, setuptex could (or should?) be adapted in such a way that one wouldn't need to provide any arguments to it, but that's a completely unrelated subject.) Some *really low priority* tasks for the future of the installer might also be: - check if ruby is installed and ask the user to install it if needed (well, Hans is planning to rewrite most of his ruby scripts to lua, so that miht not even be necessary :) - check if perl is installed and ask the user to install it if needed - [for me] once the rest is done, I would like to reproduce "mswincontext.zip" (add the missing bits and pieces to the repository), but that's also lower priority than the rest > > - you might need to provide alternative servers in the future/ask the > > user which server to choose for downloading (in case of too much > > traffic, another server could possibly mirror the contents from the > > garden) > > Sure. Just point me them. Well ... only as a remainder for the future :) According to Patrick we didn't reach the bandwidth limit yet :) > P.S. If you cannot run the installer, you may found useful see my screenshots attached. Great! Thanks a lot for it. It really looks proffessional. There's only a slightly misleading information (you need at least 2.9 MB space :) :) :) :) (Miktex -> MikTeX, Context -> ConTeXt) Thanks a lot for the great job :) Such an installed has been waited for for wuite some time :) Mojca

1 0

some warnings about fonts
by Vyatcheslav Yatskovsky 18 Nov '07

18 Nov '07

Hello, While luatex was compiling fonts, I noticed some warnings. I suspect they are harmless, but I'd better report them. ... report >> fontnames: identifying system font files with suffix ttf report >> fontnames: 101 system files identified, 370 hash entries added, runtime 0.812 seconds report >> fontnames: identifying system font files with suffix ttc report >> fontnames: 0 system files identified, 0 hash entries added, runtime 0.063000000000002 seconds report >> fontnames: identifying system font files with suffix afm report >> fontnames: 0 system files identified, 0 hash entries added, runtime 0.061999999999998 seconds report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Bad call to gww_iconv_open, neither arg is UCS4 (Sjis->UTF-8) report >> load otf: warning: Glyph 2 is called ".notdef", a singularly inept choice of name (only glyph 0 may be called .notdef) FontForge will rename it. ... Best, Vyatcheslav

4 3

little coding assistance (please)
by Steffen Wolfrum 17 Nov '07

17 Nov '07

Hi, I need some help for shorten the TeX code in the following example: My footnotes are defined like this: \def\setnotebodyfont {\let\setnotebodyfont\relax \restoreglobalbodyfont \switchtobodyfont[rm,9pt]\setupinterlinespace[line=9.8pt] \parskip2pt} But sometimes at single pages I need to shrink footnote's setupinterlinespace and parskip a bit. To adjust the percentage of shrinking (setupinterlinespace[line= \dimexpr(9.8\MyFaktor)]\parskip\dimexpr(2\MyFaktor)}) I use the following: \newdimen\MyFaktor \MyFaktor=0.978pt [Normal body-text ...] \def\setnotebodyfont {\let\setnotebodyfont\relax \restoreglobalbodyfont \switchtobodyfont[rm,9pt]\setupinterlinespace[line=\dimexpr(9.8 \MyFaktor)]\parskip\dimexpr(2\MyFaktor)} [...] Text with footnotes [...] \def\setnotebodyfont {\let\setnotebodyfont\relax \restoreglobalbodyfont \switchtobodyfont[rm,9pt]\setupinterlinespace[line=9.8pt] \parskip2pt} [...] This works great, but looks ugly and not clear at all!! Could someone please provide me a definition like \ThightNotes[0.978] and \NormalNotes that I could hook handy and clear in the respective body-text? Thanks in advance, Steffen

2 3

Re: [NTG-context] Context Minimal for Windows installer
by Vyatcheslav Yatskovsky 17 Nov '07

17 Nov '07

Hello Idris, > Congratulations! Thanks. > What files exactly are downloaded? just mswincontext.zip? Downloaded are all files from http://minimals.contextgarden.net/minimals/mswin They are current beta, I think. > What are the installation options? There is only one option so far -- to do rsync or not to do it. This option must be On for the first time, since you have no files yet; it also be used to update Context by running the installer again. It may be Off if you just want to update environment vars. > It would be a good idea to add pdftex and xetex formats options as well. The installer doesn't make format files itself. (It might be good idea, but I stuck with difficulties here). After setup, the installer prompts the user to build format files manually. User is free to use any engine; I only tested it for Luatex, as the most progressive one. And a thing I must notice -- sorry, it cannot be installed along with Miktex or TeXLive, because environment vars will clash. It's inevitable; if you want to use them in parallel, use Context in old way. This installer is for clean machines only. But there is good news also. Uninstall is possible :) > Thanks for the wonderful contribution Thanks again. -- Best regards, Vyatcheslav Yatskovsky

1 0

Context Minimal for Windows installer (cont)
by Vyatcheslav Yatskovsky 17 Nov '07

17 Nov '07

BTW, I can share sources as well. Waiting only for what community says. And, can it be hosted as alternative installer at minimals.contextgarden.net? Vyatcheslav

1 0