October 2007 - ntg-context - NTG Mailing Lists

Re: [NTG-context] LuaTeX on Mac OS X
by Otared Kavian 11 Oct '07

11 Oct '07

Dear Joeng, dear Thomas, Thank you so much for your message and your invaluable help. Indeed thanks to Thomas' instructions, after correcting a few details, I could install LuaTeX and typeset the file test-1.tex with the command texexec --lua test-1.tex However, the execution stops with this error message: <everyjob> \the \everyloadluacode \the \everyfinalizeluacode \the \everyjob but after ignoring such messages with the command r (meaning "run" without complaining...) I get the expected PDF file. Since this is not yet a clean and thoroughly working installation, I have not yet tried to put the install informations on the Wiki. Later next week I'll try to re-install everything anew and see whether I have well understood what is needed to run LuaTeX on MacOS X. Best regards: OK On 11 oct. 2007, at 17:22, Jeong Dalyoung wrote: > Dear Otared, > > Finally, luatools is working in my system. > > I reinstalled gwTeX and followed Thomas' instruction. > Also I got an advice from Lutz. > She said that use the latest Luatex and stable version of Context. > Hence I installed stable version of the ConTeXt. > I also saved environment variables in a file .luatex and run it > after open the terminal using 'source .luatex' > After that luatools is working properly. As I wrote in the list, I > need to add a line 'trie_size=400000' in texmf.cnf > > I tested a short file and it was working properly. > However, I have an error when I compile a sample file in the wiki. > I don't know why. I hope that someone answer to that question. > > Since I did it, you will do it. Maybe you already run luatools > properly. > > Thank you. > > Best regards, > > Dalyoung

2 1

'TeX capacity exceeded' problem
by Jeong Dalyoung 11 Oct '07

11 Oct '07

Dear all, Finally, luatools is working(gwTeX, Mac OSX 10.4). Following the instruction given by Thomas, I succeeded to run 'luatools --generate' but I got an error when I run 'luatools --ini --compile --verbose cont-en'. There is a memory problem for the languages. Following the suggestion, I add a line 'trie_size = 400000' at the end of texmf.cnf in the folder /usr/local/gwTeX/texmf.cnf. After that 'luatools --ini --compile --verbose cont-en' is running without error and the format file is created in the folder /tmp/ luatex-cache/context/... I test it using a simple file like \starttext some texts \startlua a = 1.5 b = 1.8 c = a*b tex.print(c) \stoplua \stoptext and it was working nicely. But when I tested a sample file in the wiki, \usetypescript[palatino] \setupbodyfont[palatino,12pt] \starttext effe fietsen 2: \input tufte $\sqrt{2}$ \eogonek \sc effe fietsen 2: \input tufte $\sqrt{2}$ \eogonek \stoptext I got a fatal error. Here are some lines in log file. ......... (/usr/local/gwTeX/texmf.pkgs/tex/context/base/type-siz.tex) (/usr/ local/gwTeX/texmf.pkgs/tex/context/base/type-otf.tex) (/usr/local/ gwTeX/texmf.pkgs/tex/context/base/type-tmf.tex) (/usr/local/gwTeX/ texmf.pkgs/tex/context/base/type-siz.tex ! TeX capacity exceeded, sorry [parameter stack size=60]. \donormalizedbodyfontsize #1.#2#3#4\to #5-> \edef #5{#1\ifcase \fontdigits \o... \docommand ...\scratchdimen \to \tempbodyfontsize \setevalue {\??ft \fontcla... \next7 #1,->\docommand {#1} \doprocesscommaitem <argument> \relax text, script,scriptscript,x,xx,big,small \doprocesscommalist ...aitem \gobbleoneargument #1 ,]\relax \global \advance ... <argument> ...acommand [\fontsizelist ]\docommand \copyparameters [\??ft \fo... ... l.22 \stoptypescript node memory in use: 1601 words out of 100604 (98904 untouched) currently available: 1:3, 2:9, 3:3, 4:7, 6:4, 8:2 nodes ! ==> Fatal error occurred, no output PDF file produced! Would you please tell me what is wrong here? Thank you. Best regards, Dalyoung

2 1

Re: [NTG-context] need help with creating a grid with context
by MASON Peter J 11 Oct '07

11 Oct '07

Perhaps I ought to tell what I'm expecting :-) ... Hope to create a regular (1cm spacing) grid on page, of bullets. Ultimately over the whole page. The context code supplied produces successive rows with an offset to the right. Have I missed something obvious? IMPORTANT NOTICE: This e-mail and any attachment to it are intended only to be read or used by the named addressee. It is confidential and may contain legally privileged information. No confidentiality or privilege is waived or lost by any mistaken transmission to you. The RTA is not responsible for any unauthorised alterations to this e-mail or attachment to it. Views expressed in this message are those of the individual sender, and are not necessarily the views of the RTA. If you receive this e-mail in error, please immediately delete it from your system and notify the sender. You must not disclose, copy or use any part of this e-mail if you are not the intended recipient.

3 4

problem with alignment
by Jean Magnan de Bornier 11 Oct '07

11 Oct '07

Hi all, Playing with right alignments this morning, I discovered that \setupalign [left] ipsum in elit Duis placerat nec augue puts text *on the right*, while \setupalign [right] ipsum in elit Duis placerat nec augue puts text *on the left*. The \startalignment[left] and \startalignment[right] commands produce the same inversion. (The \rightaligned command works as expected) ............... 12:32 jean@boldair /home/jean % texexec --version TeXExec | version 6.2.0 - 1997-2006 - PRAGMA ADE/POD ............... -- Jean

4 5

Stepping through PDF-Layers
by Wolfgang Schuster 11 Oct '07

11 Oct '07

Hi, I want to animate layers in a pdf like we can do at the moment with fieldstacks to show always the next picture after the click on a button. I will explain this on the following example. \setupcolors[state=start] \setupinteraction[state=start] \defineoverlay[nextlayer][\overlaybutton{VideLayer{L1}}] \starttext \framed [width=2cm, height=2cm, offset=overlay, background=nextlayer] {\dorecurse{4} {\defineproperty[L\recurselevel][layer][title=layer\recurselevel,state=stop]% \startproperty[L\recurselevel] \ifcase\recurselevel\or\red\or\green\or\blue\or\yellow\fi \hrule height 5mm width\hsize\relax \stopproperty}} \stoptext When i click on the frame the first layer will be visible, my problem is now to make after a second click the next layer visible on so on. I'am also interested to make one or more layers in one step visible and hide another one at the same step. The different layers I want to hide and show are stored in commalist (not yet done but this my methos for the future). Wolfgang

2 2

need help with creating a grid with context
by MASON Peter J 11 Oct '07

11 Oct '07

I'm trying to layout a grid of bullets. The results isn't the expected one. Perhaps someone could offer help here? Thanks. Here's the sort of thing I'm doing .... \setuplayout[leftmargin=0pt, leftmargindistance=0pt, backspace=0pt, rightmargin=0pt, rightmargindistance=0pt, cutspace=0pt, width=middle, topspace=0pt, header=0pt, headerdistance=0pt, footer=0pt, footerdistance=0pt, bottomspace=0pt, height=middle] %\showlayout \starttext \setuppositioning[unit=cm] \startpositioning \newcount\Row \Row = 0 \loop { \newcount\Col \Col = 0 \loop \position(\Col, \Row) {$\bullet$} \ifnum\Col < 14 \advance\Col by 1 \repeat } \ifnum\Row < 36 \advance\Row by 1 \repeat \stoppositioning \stoptext IMPORTANT NOTICE: This e-mail and any attachment to it are intended only to be read or used by the named addressee. It is confidential and may contain legally privileged information. No confidentiality or privilege is waived or lost by any mistaken transmission to you. The RTA is not responsible for any unauthorised alterations to this e-mail or attachment to it. Views expressed in this message are those of the individual sender, and are not necessarily the views of the RTA. If you receive this e-mail in error, please immediately delete it from your system and notify the sender. You must not disclose, copy or use any part of this e-mail if you are not the intended recipient.

3 2

Re: [NTG-context] need help with creating a grid with context
by MASON Peter J 10 Oct '07

10 Oct '07

>You introduce "spurious spaces" (line break sometimes adds a space) in > you loops. See ... Yes, you're right. A programmer, I tend to think that white space is always good for readability. Thanks for that tip. But I DO like the \dorecurse(...) version better. I didn't know of this macro. I couldn't survive context with this list! Thanks very much. IMPORTANT NOTICE: This e-mail and any attachment to it are intended only to be read or used by the named addressee. It is confidential and may contain legally privileged information. No confidentiality or privilege is waived or lost by any mistaken transmission to you. The RTA is not responsible for any unauthorised alterations to this e-mail or attachment to it. Views expressed in this message are those of the individual sender, and are not necessarily the views of the RTA. If you receive this e-mail in error, please immediately delete it from your system and notify the sender. You must not disclose, copy or use any part of this e-mail if you are not the intended recipient.

1 0

debian: itemize start=0
by plink 10 Oct '07

10 Oct '07

Hi, on debian testing this small file \starttext \startitemize[n] \item one \item two \stopitemize blahblah \startitemize[n,continue] \item three \stopitemize \stoptext gives an itemization that starts at zero, plus the continue does not work either (context version: 2007.09.28 16:52 (/usr/share/texmf/tex/context/base/context.tex)). Any hints or preliminary solutions greatly appreciated. P.Link

3 2

typescripts: where are my $\dot s$?
by Mojca Miklavec 10 Oct '07

10 Oct '07

Hello, My $\dot s$ and $\ddot s$ have disappeard, or rather: they have turned into some weird lines. What exactly is wrong with the typescript below? If I comment out both [rm] and [mm] then it works, but I get bitmap cm fonts then. ConTeXt ver: 2007.09.28 16:52 MKII fmt: 2007.10.2 int: english/english \starttypescript [iwonax] [ec,texnansi] \definetypeface [iwonax] [ss] [sans] [iwona-medium] [default] [encoding=\typescripttwo] \definetypeface [iwonax] [rm] [serif] [modern] [default] [encoding=\typescripttwo] \definetypeface [iwonax] [tt] [mono] [modern] [default] [encoding=\typescripttwo] \definetypeface [iwonax] [mm] [math] [modern] [default] \stoptypescript \usetypescript[iwonax][ec] \setupbodyfont[iwonax,rm] \starttext $\dot v^2$ \stoptext Any hints welcome, Mojca

1 0

Hiding PDF-Layer
by Wolfgang Schuster 10 Oct '07

10 Oct '07

Hi, I want to include PDF layers in document and the should be hidden by default, the current behaviour is to show all layers I defined in my document and this should be later by the user and not when I open the file. The following shortened example from the modules show what I mean, the text "Text" can be seen when you open the document but it should appear only if you press the "VIDE" button. \starttext \setupinteraction[state=start] \defineproperty[L1][layer][title=layer 1] \button{HIDE L1}[HideLayer{L1}] \button{VIDE L1}[VideLayer{L1}] \midaligned {\definedfont[Mono at 150pt]% \startproperty[L1] TEST \stopproperty} \stoptext Wolfgang

2 4