- ntg-context - Mailing Lists

Getting the current chapter number in the TOC
by Maggyero 17 Apr '14

17 Apr '14

Hello, How can I get the following table of contents? Contents Chapter first MyTitle Chapter II MyTitle Chapter III MyTitle I have tried: \MyNumber{\doifelse{\currentsectioncountervalue}{1}{first}{#1}} setuplist[chapter][numbercommand=\MyNumber] but it does not work. Actually because \currentsectioncountervalue always returns 0 in the table of contents. So I need another command which gives me the current number for testing if it is equal to one (first chapter). Thank you in advance.

2 1

Two figures are side by side
by Fabrice Couvreur 17 Apr '14

17 Apr '14

Hi, How do the two figures are side by side ? \setupTABLE[row][1,2][width=1.5cm,align={middle,lohi}] \setupTABLE[c][1][width=3cm,align={middle,lohi}] \starttext \startcombination[2*1] {% \bTABLE[align={middle,lohi}] \bTR\bTD{}\eTD\bTD{$A$}\eTD\bTD{$\overline{A}$}\eTD\bTD{Total}\eTD\eTR \bTR\bTD{$B$}\eTD\bTD{}\eTD\bTD{}\eTD\bTD{}\eTD\eTR \bTR\bTD{$\overline{B}$}\eTD\bTD{}\eTD\bTD{}\eTD\bTD{}\eTD\eTR \bTR\bTD{Total}\eTD\bTD{}\eTD\bTD{}\eTD\bTD{1}\eTD\eTR \eTABLE } {% {\externalfigure[denombrement.pdf]} } \stopcombination \stoptext

4 3

pagecolormodel problem
by Peter Rolf 17 Apr '14

17 Apr '14

Hi, can someone confirm, that this code fails with a recent ConTeXt version? No such problems with version "2013.12.24". \setupcolors[pagecolormodel=auto] \starttext FOO \stoptext This is what I get here... <output> D:\mydocs\TeX\dokumente\test\IM>context test mtx-context | warning: no (local) file './test', proceeding mtx-context | run 1: luatex --fmt="v:/tmp/context/tex/texmf-cache/luatex-cache/context/5fe67e0bf e781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="test" --lua="v:/tmp/context/tex/texmf-cac he/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui" --no-parse-firs t-line --c:currentrun=1 --c:fulljobname="./test" --c:input="./test" --c:kindofrun=1 --c:maxnofruns=8 "cont-yes.mkiv" This is LuaTeX, Version beta-0.79.1 (TeX Live 2014-04-01/W32TeX) (rev 4973) \write18 enabled. open source > 1 > 1 > v:/tmp/context/tex/texmf-context/tex/context/base/cont-yes.mkiv ConTeXt ver: 2014.04.07 13:00 MKIV beta fmt: 2014.4.15 int: english/english system > 'cont-new.mkiv' loaded open source > 2 > 2 > v:/tmp/context/tex/texmf-context/tex/context/base/cont-new.mkiv close source > 2 > 2 > v:/tmp/context/tex/texmf-context/tex/context/base/cont-new.mkiv system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > D:/mydocs/TeX/dokumente/test/IM/test.tex colors > 'rgb' color space is supported colors > 'cmyk' color space is supported fonts > preloading latin modern fonts (second stage) fonts > 'fallback modern-designsize rm 12pt' is loaded backend > xmp > using file 'v:/tmp/context/tex/texmf-context/tex/context/base/lpdf-pdx.xml' lua error > error on line 1 in file D:/mydocs/TeX/dokumente/test/IM/test.tex: .../context/tex/texmf-context/tex/context/base/lpdf-ini.lua:579: pdf.immediateobj() can not be used with \latelua 1 >> \setupcolors[pagecolormodel=auto] 2 \starttext 3 FOO 4 \stoptext 5 ? </output> ConTeXt version: 2014.04.07 13:00 LuaTeX version: beta-0.79.1 Peter

3 3

Spurious missing character log messages
by Rik Kabel 17 Apr '14

17 Apr '14

It appears that descriptions generate a spurious Missing character: There is no ^@ (U+0000) in font lmroman12-regular! log message. MWE: \definedescription[oops][] \starttext \oops{Where}is the U+0000? \stoptext The messages appears in the log once for each description in the document. This happens with the current (2014-04-15) beta. It does not happen with TL13. -- Rik Kabel

2 2

Column Width
by Thangalin 16 Apr '14

16 Apr '14

Hi, According to the columns manual, the following should produce a two-column layout with the first column being 1/3 and the second column being 2/3 the makeupwidth: \definecolumnset[example][n=2] \setupcolumnset[example][1][width=.33\makeupwidth] \starttext \startcolumnset[example] \dorecurse{25}{\input knuth\column[local]} \stopcolumnset \stoptext Using: mtx-context | current version: 2014.01.03 00:40 What is the simplest example to achieve two different column widths for a columnset? (The Paragraphs example on the wiki -- http://wiki.contextgarden.net/Columns#Paragraphs -- works, but I need the flexibility of column sets.) Thank you!

1 1

\triangledown placed too low in Palatino
by Sanjoy Mahajan 16 Apr '14

16 Apr '14

I just noticed that the gradient operator (\triangledown) ends up too low when using Palatino: \setupbodyfont[palatino] \starttext $\triangledown T$ \stoptext It seems about 3pt too low. Without the \setupbodyfont[palatino], the placement is fine. (tested with 2013.05.28 and 2014.03.27 betas) -Sanjoy

7 14

Insert text at end of every paragraph
by Joshua Krämer 15 Apr '14

15 Apr '14

Dear list, I want a text string to be inserted at the end of every paragraph. I've tried it like that: \define \par {Endstring\endgraf} \starttext \chapter {Chapter} \section {Section} \input knuth \input zapf \stoptext This works, but it results in a lot of additional strings. The string "Endstring" should appear on paragraph ends only (it's acceptable to appear after headings, too). How can I achieve the desired result? Is there maybe something like \EveryPar for the end of paragraphs? Thanks and kind regards, Joshua Krämer

1 0

Problem with pdf output for FeedARead.com
by Keith McKay 15 Apr '14

15 Apr '14

Colleagues A friend of mine asked me to produce a small book of three of her short stories for FeedARead.com from a word document. On looking at the site I suggested I do a conversion to pdf since it would look much better and FeedARead recommend uploading pdf over word as well. So I set about using Context to produce a simple pdf for upload using the structure below: \definepapersize[leela][width=5in, height=8in] \setuppapersize[leela][leela] \setuplayout[backspace=0.75in,cutspace=0.5in,width=fit] \setupindenting[yes,medium,next] \setuppagenumbering[state=stop] \setupexternalfigures[location={local,default}] \setupalign[nonhyphenated] \setuphead[section-3][number=no,align=middle][alternative=doublesided,location=footer] \setuptolerance[vertical,verystrict] \setuptolerance[horizontal,verytolerant] \starttext \midaligned{\tfd{Title Page}} \page FeedAReed blurb and copyright notice goes here. \setupcombinedlist[content][list={chapter,section,subsection}] \completecontent \page[empty] \setuppagenumbering[state=start,alternative=doublesided,location=footer] \startsection[title={Knuth}] \input knuth\par \stopsection \page \startsection[title={Zapf}] \input zapf\par \stopsection \page \startsection[title={Tufte}] \input tufte\par \stopsection \stoptext As you can see it's nothing fancy but is produces nice copy. However, when my friend uploaded to FeedARead she received back this comment: /Please note that you have uploaded TWO pages of your book per one 5 inch wide x 8 inch high page e.g. on your file there would be two book pages of print per page and not one per page as required./ I did notice that when viewed in Adobe Reader, V11.0.6, it displays two pages on the screen at a time but on checking the documents properties it shows the correct page size so I thought it was OK. I've had a look on the wiki but haven't found anything obviously wrong in what I've done above. Is their something I'm missing in \definepapersize or \setuppapersize? I really don't want to have to tell her to upload the word doc. Thanks and Best Wishes Keith

1 0

Re: [NTG-context] Bug in ligature lookup
by "H. Özoguz" 15 Apr '14

15 Apr '14

> a real minimal example with clear explanation is needed so that it can > be traced (and we need to be sure the font is right) I have postet a minexample already here: http://www.ntg.nl/pipermail/ntg-context/2014/077590.html There is a link to the used font, too. If you have problem to see the unicode (like in my mailer), then you can copy the symbol from pure html here: http://www.ntg.nl/pipermail/ntg-context/attachments/20140402/d24030dc/attac… You can see the outout, like it should be (screenshot from other programms outputs) here: http://www.ntg.nl/pipermail/ntg-context/attachments/20140402/d24030dc/attac… It is a very small and clear minexample in my view :) I do not know, if the font is valid, surely it may have some problems. But in this case other programs I tried (namely CorelDraw and MS Word) do not have any problems with this unicode-symbol. Help and fix would be great, as this symbol is the only one left in my list of hacks and workarounds to typeset the quran with ConTeXt. (Hacks etc. needed, because unfortunately there are no good arabic font, either free or commercial, which can be used for the massive needs of typesetting quran (thats why nearly all used qurans are still written by hand)). But if I can make it clearer, I will definitely try, because it is an important question for typessting quran with ConTeXt. Thanks! Huseyin

1 0

Fail to upgrade, can't find file page-lin.mkiv
by Mikael P. Sundqvist 15 Apr '14

15 Apr '14

Hi, I tried today to upgrade my ConTeXt Standalone (using first-setup.sh) and get the error ! I can't find file `page-lin.mkiv'. <to be read again> \relax l.299 \loadmarkfile{page-lin} What can I do about this? Best regards, Mikael

2 2