- ntg-context - Mailing Lists

problem loading attachments (important for my work)
by Pablo Rodriguez 11 Jun '17

11 Jun '17

Dear list, I have the following sample: \setupinteraction[state=start] \setupinteractionscreen[option=attachment] \setuppapersize[A5, landscape] \setuppagenumbering[location=] \starttext File: \attachment[file={h:/general-documents/document.pdf}] \stoptext I’m afraid that the file exists and ConTeXt in Win10 (64bit) isn’t able to load the file. ConTeXt loads \attachment[file=document.pdf], but not documents with paths. Could anyone confirm the issue in Windows? This is important for my work. BTW, if you don’t want to invoke "net use", "subst" may do the trick (https://ss64.com/nt/subst.html) Many thanks for your help, Pablo -- http://www.ousia.tk

2 3

problem loading attachments (important for my work)
by Akira Kakuto 08 Jun '17

08 Jun '17

> Could anyone confirm the issue in Windows? Here, in both of examples below, the file is successfully attached in Windows: \setupinteraction[state=start] \setupinteractionscreen[option=attachment] \setuppapersize[A5, landscape] \setuppagenumbering[location=] \starttext File: \attachment[file={c:/usr/work/examples/pic.pdf}] \stoptext % % without braces % \setupinteraction[state=start] \setupinteractionscreen[option=attachment] \setuppapersize[A5, landscape] \setuppagenumbering[location=] \starttext File: \attachment[file=c:/usr/work/examples/pic.pdf] \stoptext Best, Akira

1 0

splitting a landscape table with local footnotes
by Alan Bowen 08 Jun '17

08 Jun '17

I have a very long table (landscape) with local footnotes that I wish to split over two pages so that (a) the table is on a verso page and (b) the notes on the next recto page. Any suggestions about how to do this will be gratefully received. Here is a MWE that is not too small, I hope. \starttext \dorecurse{5}{\input knuth} \setupnotation[footnote][numberconversion=characters] \startlocalfootnotes \setupTABLE[frame=off,split=yes] \setupTABLE[c][1,2,3,4,5,6][roffset=.3pc] \setupTABLE[c][2,3,4,5,6,7][loffset=.3pc] \startplacetable[title={Hellenistic calendars}, location={page,header,high,90}] %leftpage does not seem to work {\setbox\scratchbox\vbox{% \bTABLE \bTABLEbody \bTR\bTD \eTD \bTD Babylonian\eTD \bTD Greek\eTD \bTD Egyptian\eTD \bTD Roman\eTD \bTD Judaean% \footnote{\input knuth}\eTD\eTR \eTABLEbody \eTABLE} \par \hsize\wd\scratchbox \box\scratchbox \par \placelocalfootnotes \stoplocalfootnotes} \stopplacetable \stoptext Alan

1 0

Position of prime for derivatives
by Otared Kavian 08 Jun '17

08 Jun '17

Hi Hans, Thanks for having fixed the behavior of the prime in the latest beta release (ConTeXt version 2017.05.15 21:48). However, as you may see in the two attached PDF files, the result is still incorrect when one types for example $f_2’’(x)$, which should give the same result as $f’’_2(x)$. The correct behaviour is that obtained with mkii. Indeed one can circumvent the behaviour of the latest beta release of mkiv by using tricks such as the ones in the example code below, but this should be avoided in my opinion. The following PDF have been obtained with mkii and mkiv with the following example code. Best regards: OK %%% begin derivatives-prime.tex \starttext \startformula f''_{2}(x) = f_{2}''(x) = f^{''}_{2}(x) = f_{2}^{''}(x) % = f^{{}^{''}}_{2}(x) \stopformula As one may see the result of \type{f_{2}''(x) = } $f_{2}''(x)$ is not correct in \type{mkiv}. The following positions of the superscripts \type{(3)} are correct both in \type{mkii} and in \type{mkiv}. \startformula f^{(3)}_{2}(x) = f_{2}^{(3)}(x) \stopformula \stoptext %%% end derivatives-prime.tex

6 27

Misnamed parameter in \setuppagenumbering?
by Henri Menke 08 Jun '17

08 Jun '17

Dear list, On TeX.SX there was a question about why ConTeXt starts the document with a left instead of a right page. Turns out the OP merely confused "marginedge" with "inmargin". However, that made me wonder, is "marginedge" perhaps misnamed when it does not place the pagenumber in the margin close to the edge of the page? I think it should be named "marginspine" instead. The below MWE should illustrate the problem. Cheers, Henri --- \setuppagenumbering [ alternative=doublesided, location={footer,marginedge}, ] \starttext Behold the pagenumber on the left \stoptext

2 1

change image resolution
by Henning Hraban Ramm 08 Jun '17

08 Jun '17

Ahoi, the old unofficial lua module grph-downsample doesn’t seem to work anymore (with latest MkIV), don’t know when it stopped working and what the problem is – at least my pictures aren’t found any more if I load that file (\loadluafile[grph-downsample]). Is there a different/better/newer way of downsampling pictures? (Keywords: shrink resolution externalfigure) Greetlings, Hraban --- http://www.fiee.net http://meeting.contextgarden.net GPG Key ID 1C9B22FD

1 0

how to prevent stupid typos?
by Pablo Rodriguez 08 Jun '17

08 Jun '17

Dear list, I have the following sample: \starttext This is \linenote{abed intended. \stoptext >From which I get the error: close source > level 2, order 3, name '/home/ousia/untitled.tex' close source > level 1, order 3, name '/home/ousia/ctxbeta/tex/texmf-context/tex/context/base/mkiv/cont-yes.mkiv' * tex error > tex error on line 0 in file : ! Emergency stop <*> cont-yes.mkiv <empty file> End of file on the terminal! Would it be any way to make ConTeXt report that \linenote{ hasn’t been closed? I mean, with a three line source, it is stupid to get this. But in a longer file, it can be an exhausting task. The scenario may be worse. At work I have a system to generate some documents (mainly letters) automatically. I have to add an option (which I didn’t find the time to fully implement it). The system uses ConTeXt and there are about 30 source files. Depending on the options you need, the main file requires the other files (via modes and \input commands). Well, in this context (no pun intended), I get an error such as this: open source > level 3, order 4, name 'untitled.tex' But the source isn’t closed. I don’t have the files here, but I don’t know even how to start searching. In this second case, how could I get a hint of what is ConTeXt expecting? May thanks fory your help, Pablo -- http://www.ousia.tk

5 17

mathradical defaults to "normal", should it perhaps be "default"?
by Mikael P. Sundqvist 08 Jun '17

08 Jun '17

Hi, this might be a matter of taste. look at the output of (attached). In my opinion the first square root is to "high", while it looks better on the second line. From setup-en.pdf it looks like the default of \setupmathradical is set to normal (and not default). I don't understand what normal should mean, but I think the alternative=default looks better. (The lucida fonts are loaded in this example, since the effect is more clear for them). /Mikael \setupbodyfont[lucidaot] \starttext \startTEXpage[offset=2pt] \startformula \sqrt{1+x^2}\neq \frac{1}{\sqrt{1+x^2}} \stopformula %the default setting for mathradical seems to be "normal". We change it to "normal" \setupmathradical[sqrt][alternative=default] \startformula \displaystyle\sqrt{1+x^2}\neq \frac{1}{\sqrt{1+x^2}} \stopformula \stopTEXpage \stoptext

5 9

aligning external figures
by Pablo Rodriguez 07 Jun '17

07 Jun '17

Dear list, I have the following sample: \setupexternalfigure[location=default, align=middle] \starttext \dontleavehmode\externalfigure[cow.pdf] \externalfigure[cow.pdf] \stoptext As you can see, \dontleavehmode makes no difference. Does anyone know how the align key in \setupexternalfigure works? Many thanks for your help, Pablo -- http://www.ousia.tk

2 4

bug with hidden attachments?
by Pablo Rodriguez 06 Jun '17

06 Jun '17

Dear list, I have the following sample: \setupinteraction[state=start] \setupinteractionscreen[option=attachment] \setuppapersize[A5, landscape] \setuppagenumbering[location=] \starttext \startbuffer[abc] hola μαριόλα \stopbuffer This PDF document contains a visible attachment.\attachment[name=hidden.txt, title={χαλεπὰ τὰ καλά}, author=ConTeXt, subtitle=χαλεπὰ τὰ καλά, method=hidden, buffer=abc] This PDF document should contain the same hidden attachment (under a different name\attachment[name=visible.txt, title={χαλεπὰ τὰ καλά}, author=ConTeXt, subtitle=χαλεπὰ τὰ καλά, method=visible, buffer=abc]. \stoptext In short, the visible attachment is actually attached, but the hidden isn’t attached at all. Could anyone confirm the issue or tell me what I am missing? Many thanks for your help, Pablo -- http://www.ousia.tk

1 0