- ntg-context - NTG Mailing Lists

Disable overlay on chapter pages
by Mikael P. Sundqvist 04 Aug '17

04 Aug '17

Hi, I'm trying to print chapter and section titles in the margins, and it works fine, except that the chapter title is also printed on the same page as the chapter starts, which I find unnecessary. 1) Can I somehow (probably via the right \setuphead trick) disable this overlay only on chapter pages? 2) If I want to disable it on another page, is there some smart way of doint it, or should I just set it blank and then enable it when I know I'm on next page again? /Mikael PS The code I have right now is given below. It compiles, but the chapter title is shown on the first page... \setuppagenumbering[alternative=doublesided] \defineoverlay[mymargin][{\framed[frame=off,width=0.8in,height=0.8\textheight,offset=overlay,align={top}]{\doifrightpageelse{{\startalignment[flushleft]\getmarking[chapter]\stopalignment}}{{\startalignment[flushright]\getmarking[section]\stopalignment}}}}] \setupbackgrounds[text][rightmargin][background=mymargin] \starttext \chapter{Foo} \dorecurse{15}{\section{Bar}\input ward\par} \stoptext

5 11

Re: [NTG-context] source code and result side by side
by Henning Hraban Ramm 04 Aug '17

04 Aug '17

Am 2017-08-04 um 06:30 schrieb Henri Menke <henrimenke(a)gmail.com>: > On 08/04/2017 07:46 AM, Henning Hraban Ramm wrote: >> Am 2017-07-31 um 03:26 schrieb Aditya Mahajan <adityam(a)umich.edu>: >> >>> You can't do that with buffers. If you need to define your own macros that behave like buffers, you need to use \grabbufferdata (see buff-ini.mkiv). But in this case, there is a simpler solution: >>> >>> \defineframed >>> [CodeExampleFramed] >>> [ >>> frame=off, >>> width=0.5\textwidth, >>> align=normal, >>> ] >>> >>> \definebuffer >>> [CodeExample] >>> >>> \define\stopCodeExample >>> {\placesidebyside >>> {\CodeExampleFramed{\typeCodeExample}} >>> {\CodeExampleFramed{\getCodeExample}}} >> >> Oh, I overlooked something: >> Can I get pretty printing back, like in \startTEX ... \stopTEX? >> >> I couldn’t find any suitable setup options. > > \typebuffer[whatever][option=tex] \typebuffer[CodeExample][option=tex] doesn’t do anything, but \typeCodeExample[option=tex] actually works, I didn’t expect that. Thank you! Greetlings, Hraban --- http://www.fiee.net http://wiki.contextgarden.net GPG Key ID 1C9B22FD

1 0

source code and result side by side
by Henning Hraban Ramm 03 Aug '17

03 Aug '17

Ahoi again, I’m preparing some ConTeXt docs with a lot of examples and would like to reproduce what we have in the wiki as <context source="yes"> ... </context> i.e. sourcecode beside the result. Often the shown source is exactly what I want to show, in other cases I need some additional setup that I don’t want to show. Which approach would you suggest? Combinations? Greetlings, Hraban --- http://www.fiee.net http://wiki.contextgarden.net GPG Key ID 1C9B22FD

3 8

Re: [NTG-context] TwoColumns in two different languages, with alternate text on even and odd page.
by Marcello Urgo 03 Aug '17

03 Aug '17

Dear Hans, I am also intersted in this issue. In the last years I am dealing with a multi-language technical lexicon. Hence, different languages refer to different columns, and if the languages are three or four, then it is better to go with two pages side-by-side. Nevertheless this seems a problem also in LaTeX redelpar (multiple columns are not supported). I tried to manage it with \linetable but without success (https://tex.stackexchange.com/questions/380923/synchronise-data-spanning-ov…) I think this feature could be really interesting because, according to my knowledge, ConTeXt is at present the best way to manage the publishing of XML data. Hence, this could be a useful tool to publish large sets of data. Thank you in advance Marcello Urgo, Ph.D. Assistant Professor Manufacturing and Production Systems Lab. Mechanical Engineering Department POLITECNICO DI MILANO Via La Masa, 1 - 20156 Milano Phone +39 02 2399 8521 Fax +39 02 2399 8585 tecnologie.mecc.polimi.it<http://tecnologie.mecc.polimi.it/> www.polimi.it<http://www.polimi.it/> This message may contain confidential and/or otherwise reserved information and is thus for use only by the intended recipient. If you received this in error, please contact the sender and delete the e-mail and its attachments from your computer. Thank you. Il presente messaggio può contenere informazioni di carattere confidenziale e/o riservate ed è quindi ad uso esclusivo del destinatario. Nel caso aveste ricevuto questa e-mail per errore siete pregati di contattare immediatamente il mittente e di cancellare il messaggio ed i suoi allegati dal vostro computer. Grazie.

2 2

bug in latest beta (2017.08.02 18:59)
by Pablo Rodriguez 03 Aug '17

03 Aug '17

Hans, I’m afraid latest beta (2017.08.02 18:59) crashes with this source: \setupnote[footnote] [align={hanging}] \starttext a\footnote{\input knuth} \stoptext I’m afraid it might be a bug. Pablo -- http://www.ousia.tk

2 7

Cambria official typescript (mis)behavior
by Idris Samawi Hamid ادريس سماوي ح امد 03 Aug '17

03 Aug '17

Dear gang, There appears to be something awry with type-imp-cambria.mkiv or type-imp-dejavu.mkiv. Consider the following: ======= \setupbodyfont [cambria,12pt] \starttext Test % {\it Test} {\bf Test} {\bi Test} \stoptext ======= This produces a pdf with Cambria Italic instead of Cambria Regular. Uncommenting the other three options produces the expected results. Is this a bug or am I missing something? Awaiting your advice! Best wishes Idris -- Idris Samawi Hamid, Professor Department of Philosophy Colorado State University Fort Collins, CO 80512

5 10

\tt in \typeinlinebuffer
by Pablo Rodriguez 02 Aug '17

02 Aug '17

Hans, after testing the new \xmlinlineprettyprinttext, I discovered the following: \starttext \startbuffer[a] \command \stopbuffer \typeinlinebuffer[a] vs. \typeinlinebuffer[a][option=TEX] \stoptext \typeinlinebuffer doesn’t have \tt as default font. Many thanks for your help, Pablo -- http://www.ousia.tk

1 1

imposition with some rotated pages
by Pablo Rodriguez 02 Aug '17

02 Aug '17

Dear list, I have a PDF document in A4 paper size with some rotated pages. I would like to make a booklet of it: \setuppapersize [A5][A4, landscape] \setuparranging [2UP] \setuplayout [backspace=0pt, topspace=0pt, width=middle, height=middle, location=middle, header=0pt, footer=0pt] \setupinteractionscreen[option={landscape, paper}, copies=1] \starttext \filterpages[report.pdf][1:25][width=0pt] \filterpages[report.pdf][27:30][width=0pt]%they are rotated \filterpages[report.pdf][31:100][width=0pt] \stoptext The rotated pages in the source PDF document are a problem here. The wiki contains the info that \filterpages may be rotated with [orientation=90]. But this seems to be old, since it doesn’t work. If I add \rotate[rotation=90]{\filterpages[report.pdf][27:30][width=0pt]}, automatic scaling doesn’t work. And all pages will be considered as a single image. Is there any way to have rotation for some pages in the source document to get the right imposition? I’m afraid rotation comes from the source PDF document in this case. Many thanks for your help, Pablo -- http://www.ousia.tk

4 5

(again) \typebufferinline for XML inline code
by Pablo Rodriguez 02 Aug '17

02 Aug '17

Hans, sorry for asking for this again, but I really need it to write some documents about ConTeXt. I have the following sample: \startTEXpage[offset=1em] only \type{a b c} one line \stopTEXpage \stoptext \type Would it be possible to have a new \typebufferinline that behaves such as \type above (and has the same options in \setuptype)? The most important part isn’t the suppression of line breaks inside, but avoiding the addition of line breaks after and before the typed buffer. I have been reading buff-ver.mkiv, but I’m afraid I cannot contribute such a patch. This is essential to have \xmlprettyprintinline and \xmlprettyprintinlinetext in order to handle inline code in XML. Many thanks for your help, Pablo -- http://www.ousia.tk

2 4

About \setupbackgrounds
by Fabrice Couvreur 02 Aug '17

02 Aug '17

https://tex.stackexchange.com/questions/84425/fancyhdr-equivalent-in-context Hello, I considered the solution proposed by Aditya. How to have a larger space between the title and the bottomframe ? Thank you Fabrice \setupbodyfont[11pt] \setupcolors[state=start] \setuplayout [header=2\lineheight, headerdistance=\lineheight, backspace=2cm, width=middle, topspace=2cm] \setupbackgrounds[header][text][frame=off, bottomframe=on] \setupheader[style=bold] \defineframed[headerframed] [frame=off, align=middle, width=fit] \setupheadertexts[\headerframed{\red contrôle n\high{o}1 \\ }] \setupheadertexts[\headerframed{Lycée JANSON DE SAILLY\\ 31 juillet 2017}][\headerframed{T ES 2 \\ Durée 1 heure 30}] \starttext \input knuth \stoptext

2 3