- ntg-context - Mailing Lists

spacing before items
by Mike Cooper 29 Jun '20

29 Jun '20

Hello list, Another very simple issue-no doubt the answer is right in front of me but I can't find it or figure it out... (Please let me know where it is!) I want more space before each top-level item. MWE: \defineitemgroup[mdshw][levels=2] \setupitemgroup[mdshw][1][n] \setupitemgroup[mdshw][2][a, packed, 1*broad][left=(, right=), stopper=] \starttext \startsection{First Section} \startmdshw \item Choose the correct answer. \startmdshw \item This one \item This one \item This one \stopmdshw \item Choose the correct answer. \startmdshw \item This one \item This one \item This one \stopmdshw \item Choose the correct answer. \startmdshw \item This one \item This one \item This one \stopmdshw \startmdshw \stoptext THANK YOU!! Mike Cooper Technical Trainer Murchison Drilling Schools, Inc. 2501 Juan Tabo NE Albuquerque, NM 87112 Tel: (505) 293-6271 Fax: (505) 298-5294 Email: mike(a)murchisondrillingschools.com<mailto:mike@murchisondrillingschools.com> Website: www.murchisondrillingschools.com<http://www.murchisondrillingschools.com/> [cid:image007.jpg@01D03ADC.BD6E6850]<https://www.facebook.com/pages/Murchison-Drilling-Schools/158018484232622> [cid:image008.jpg@01D03ADC.BD6E6850] <http://www.linkedin.com/company/murchison-drilling-schools-inc-> [cid:image009.jpg@01D03ADC.BD6E6850] <https://twitter.com/trainingmds> Murchison Drilling Schools is now part of [cid:image001.png@01D63515.857FD120]

6 19

Converting from LaTeX for PDF accessibility tagging?
by Alasdair McAndrew 29 Jun '20

29 Jun '20

Hello, I tried ConTeXt a few years ago, then gave up on it because of its wordiness and verbosity. The 2006 article on creating AMSTeX output in ConTeXt at https://www.ntg.nl/maps/34/06.pdf shows exactly what I mean: the LaTeX commands are small and neat; the ConTeXt commands are not. However, I need now to use ConTeXt for accessibility tagging, so I'm prepared to give it another try. And this means converting some LaTeX documents into ConTeXt. Is there a better way than using pandoc? I ran a LaTeX document through pandoc, but the result is certainly not fully "ConTeXt compliant", and generates errors instead of compiling. I can get easily lost on the ConTeXt site: the documentation is there in plenty, but seems hard to search. The main problem for me is mathematics and alignment: not just for equations, but for matrices and arrays. What I'd love - if it exists - is a document showing how to rewrite LaTeX into ConTeXt. Something like the above document, which is now 14 years old. I also notice that much of the contextgarden wiki is outdated. For example, on the use of ConTeXt in MikTeX, we read "As of end of June 2011 MikTeX is still (or again) non-functional." I'm aware that all of this is the work of dedicated and unpaid volunteers, so this is not a complaint! Just an observation. Anyway, as I say, my main issues are converting LaTeX into ConTeXt. and dealing with mathematics. Any pointers would be gratefully received! Thanks, Alasdair -- https://numbersandshapes.net

2 3

Footnotes in math mode
by Jairo A. del Rio 28 Jun '20

28 Jun '20

Hi list! I want to know how to properly use footnotes in math mode. The following: \starttext \startformula \int_{a}^{b} f(x) d x=\lim _{h=0}\left[\int_{a}^{c-h} f(x) d x+\int_{c+h}^{b} f(x) d x\right] \startfootnote Footnote \stopfootnote \stopformula \stoptext doesn't complain but it doesn't show the footnote either. So, I'm using the following workaround: \starttext \startformula \int_{a}^{b} f(x) d x=\lim _{h=0}\left[\int_{a}^{c-h} f(x) d x+\int_{c+h}^{b} f(x) d x\right]\note[mynote1] \stopformula \footnotetext[mynote1]{Cauchy s'occupe du cas...} \stoptext However, 1) I have to create notes every time and it's kinda annoying when a large amount of formulas are annotated (I've read somewhere it's bad practice to (ab)use footnotes in math writing, but I see this often in books from the 19th century or earlier), 2) the numbering is bold. Making the numbering normal rather than bold would be fine, but I want to know about a better solution. Thank you in advance Jairo :) PS: How to answer messages sent to the mailing list? I'm on Gmail and I have to wait until the Digest comes. However, I can see messages in mail-archive.com. It's a dumb question, but when I want to thank Hans, Wolfgang or Aditya (and everyone else) for an answer, or following a thread, I have to edit the whole Digest mail. Sorry if I've been ungrateful by not answering back. Thank you again.

2 3

LSP support
by Saša Janiška 28 Jun '20

28 Jun '20

Hello, yesterday while exploring features/plugins of Kakoune (https://kakoune.org/) editor I, naturally, asked about ConTeXt/LaTeX support and was told about TexLab project (https://github.com/latex-lsp/texlab) bringing LSP (https://microsoft.github.io/language-server-protocol/) support for LaTeX. Interestingly enough, by browsing through the tickets I've found the following issue: "ConTeXt support" (https://github.com/latex-lsp/texlab/issues/166) where one of the, afaict, main devs of the project replied with: "ConTeXt support is definitely in scope of this project. Our LaTeX parser does not rely on LaTeX specifics but a lot of the features like code completion rely on LaTeX specifics. Nevertheless, supporting ConTeXt is a lot of effort at the moment as I have never used ConTeXt before. Supporting the project structure of ConTeXt would probably be the first step. " Of course, I'm glad that TexLab project does provide LSP support and bringing it to the Kakoune editor as well, but I'm sure that many of you know that bringing ConTeXt support to TexLab would benefit users of **many** other editors since these today many most popular editors (Atom, Emacs, SublimeText, (neo)Vimn, VScode...) are having support for LSP. Unfortuantely, I'm ConTeXt noob and not speaking Rust, but just want to bring the information if there are people familiar with both about potential benefit for ConTeXt to get LSP support. Sincerely, Saša -- One who is not disturbed in mind even amidst the threefold miseries or elated when there is happiness, and who is free from attachment, fear and anger, is called a sage of steady mind.

3 2

\asciimode and \type{%%}
by Wolfgang Schuster 27 Jun '20

27 Jun '20

Hi, when asciimode is enabled the \type command ignores double comment symbols. \starttext \quotation{\type{%}} \quotation{\type{%%}} \asciimode \quotation{\type{%}} \quotation{\type{%%}} \stoptext Wolfgang

2 4

pagecolumns: get the current column
by mf 26 Jun '20

26 Jun '20

Hello list, I'm using a 2-columns layout and I'd like to put some information in the margin. I should put that information in the left margin when I'm in the left column, and in the right margin when I'm in the right column, to prevent the extra information overlapping the main text in the other column. I found a useful counter in page-pcl.mkiv: \c_page_col_current. Here's a MWE: \unprotect \def\curCol{\c_page_col_current} \protect \def\InfoInMargin#1{\doifelse{\the\curCol}{1}{\inmargin{#1}}{\inothermargin{#1}}} \def\TestText{\InfoInMargin{\bf \the\curCol}\input ward \InfoInMargin{\bf \the\curCol} \input ward} \starttext \startpagecolumns[n=2,distance=25mm] \dorecurse{5}{\TestText\par} \stoppagecolumns \stoptext \c_page_col_current works most of the time, but unfortunately it tells you the current column before the lines of a paragraph get distributed over columns. So sometimes it fails. You can see that in the MWE: the bold "1" between columns in the upper part of the page. It should be a bold "2" in the right margin. Is there a better way to read the current column? Thanks, Massi

2 1

error running wiki example with labels
by Jan-Erik Hägglöf 26 Jun '20

26 Jun '20

Hello All! In the page https://wiki.contextgarden.net/Labels <https://wiki.contextgarden.net/Labels> I’ve tried with no success to run those examples given at the page. The error complaint as the log shows below return { ["filename"]="./labels3.tex", ["lastluaerror"]="function call [801]: ...-64/tex/texmf-context/tex/context/base/mkiv/node-syn.lua:435: attempt to index a nil value (upvalue 'filehandle')", ["lasttexerror"]="?", ["linenumber"]=70, ["luaerrorline"]="435", ["offset"]=10, } open source > level 1, order 1, name 'cont-yes.mkiv' system > system > ConTeXt ver: 2020.03.10 14:52 MKIV beta fmt: 2020.4.13 int: english/english system > system > 'cont-new.mkiv' loaded open source > level 2, order 2, name '/Users/janneman/context-osx-64/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv' system > beware: some patches loaded from cont-new.mkiv close source > level 2, order 2, name '/Users/janneman/context-osx-64/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv' system > files > jobname 'labels3', input './labels3', result 'labels3' fonts > latin modern fonts are not preloaded languages > language 'en' is active system > synctex functionality is enabled, expect 5-10 pct runtime overhead! open source > level 2, order 3, name './labels3.tex' open source > level 3, order 4, name '/Users/janneman/context-osx-64/tex/texmf-context/tex/context/fonts/mkiv/type-imp-plex.mkiv' open source > level 4, order 5, name '/Users/janneman/context-osx-64/tex/texmf-context/tex/context/fonts/mkiv/type-imp-texgyre.mkiv' close source > level 4, order 5, name '/Users/janneman/context-osx-64/tex/texmf-context/tex/context/fonts/mkiv/type-imp-texgyre.mkiv' close source > level 3, order 5, name '/Users/janneman/context-osx-64/tex/texmf-context/tex/context/fonts/mkiv/type-imp-plex.mkiv' fonts > defining > font with asked name 'IBMPlexSans-regular' is not found using lookup 'file' fonts > defining > unknown font 'IBMPlexSans-regular', loading aborted fonts > defining > unable to define 'IBMPlexSans-regular' as 'ibmplex-11pt-ss-tf-0--0' open source > level 3, order 6, name '/Users/janneman/context-osx-64/tex/texmf-context/tex/context/base/mkiv/meta-imp-dum.mkiv' close source > level 3, order 6, name '/Users/janneman/context-osx-64/tex/texmf-context/tex/context/base/mkiv/meta-imp-dum.mkiv' metapost > library 'dum' is loaded metapost > initializing instance 'metafun:1' using format 'metafun' and method 'default' metapost > loading 'metafun' as '/Users/janneman/context-osx-64/tex/texmf-context/metapost/context/base/mpiv/metafun.mpxl' using method 'default' metapost > initializing number mode 'scaled' metapost log > metapost log > loading metafun, including plain.mp version 1.004 for metafun iv and xl metapost log > fonts > bodyfont '14pt' is defined (can better be done global) fonts > bodyfont '16.8pt' is defined (can better be done global) fonts > bodyfont '11.2pt' is defined (can better be done global) fonts > defining > font with asked name 'IBMPlexSans-regular' is not found using lookup 'file' fonts > defining > unknown font 'IBMPlexSans-regular', loading aborted fonts > defining > unable to define 'IBMPlexSans-regular' as 'ibmplex-14pt-ss-tf-0--0' lua error > lua error on line 70 in file ./labels3.tex: function call [801]: ...-64/tex/texmf-context/tex/context/base/mkiv/node-syn.lua:435: attempt to index a nil value (upvalue 'filehandle') 60 \setlayer[BG][ 61 preset=leftbottom, 62 hoffset=5mm, 63 voffset=3mm]{% 64 the context group} 65 66 \starttext 67 \startlines 68 \Name{Hans Hägar} 69 \Title{CEO · R&D} 70 >> \page 71 72 \Name{Wolf Schmidt} 73 \Title{0th Level Support} 74 \page 75 76 \Name{Mocca Bob} 77 \Title{the Builder} 78 \page 79 80 \Name{A. Rockefeller} It seems to complain with the \page command Jan-Eriks-Air: ~/Google Drive/PRIVAT janneman > context --version mtx-context | ConTeXt Process Management 1.03 mtx-context | mtx-context | main context file: /Users/janneman/context-osx-64/tex/texmf-context/tex/context/base/mkiv/context.mkiv mtx-context | current version: 2019.07.24 11:31 mtx-context | main context file: /Users/janneman/context-osx-64/tex/texmf-context/tex/context/base/mkiv/context.mkxl mtx-context | current version: 2020.03.10 14:52

5 9

Which lua XML library is embedded in LMTX?
by Gerben Wierda 26 Jun '20

26 Jun '20

According to the XML manual: << 2.1 >> TEX versus LUA It will not come as a surprise that we can access xml files from TEX as well as from Lua. In fact there are two methods to deal with xml in Lua. First there are the low level xml functions in the xml namespace. On top of those functions there is a set of functions in the lxml namespace that deals with xml in a more TEXie way. << 3.7 >> manipulation You can use Lua code to manipulate the tree and it makes no sense to duplicate this in TEX. In the future we might provide an interface to some of this functionality. Keep in mind that manipuating the tree might have side effects as we maintain several indices into the tree that also needs to be updated then. Having read that, I was loooking for the documentation of the commands that are available in the xml namespace. I want to manipulate a XML tree in LMTX lua. But looking online gives me all kinds of different XML-solutions that are proposed for lua. Which one is embedded in LMTX and available in the xml namespace? But then I get confused because other elements like xml.first, xml.collected are in the xml namespavce and mentioned. So, maybe I misunderstand things and is the documentation in << 5.5 >> selectors and injectors This section describes a bit special feature, one that we needed for a project where we could not touch the original content but could add specific sections for our own purpose. Hopefully the example demonstrates its useability. But that part I do not understand. What I need (in LMTX lua) to add (sub)nodes to the XML node (that I read with xml.first()) because the data I get is broken and I need to fix it before I can use it (and I cannot get good data) The easiest way is to add the correct data to the XML and then use it in my code. If I cannot do that I need to write parallel code that largely does the same as what I already have (ugh).. G

2 1

Macros which scan subscripts/superscripts in ConTeXt
by Jairo A. del Rio 26 Jun '20

26 Jun '20

Hi, list! I've seen the following in Stack Exchange: https://tex.stackexchange.com/questions/503208/define-macro-that-scans-ahea… The answer is: \documentclass{article}\usepackage{amsmath}\usepackage{xparse} \NewDocumentCommand{\mymathsym}{e{^_}}{% x^{\mathrm{foo}\IfValueT{#1}{,#1}}_{\mathrm{bar}\IfValueT{#2}{,#2}}%} \begin{document} \begin{gather}\mymathsym \\\mymathsym^{\mathrm{extrasup}} \\\mymathsym_{\mathrm{extrasub}} \\\mymathsym^{\mathrm{extrasup}}_{\mathrm{extrasub}} \\\mymathsym_{\mathrm{extrasub}}^{\mathrm{extrasup}} \end{gather} \end{document} Such a macro contextually defines a behavior for a subscript and a superscript even if they aren't displayed in a specific order, so \mymacro_{a}^{b} \mymacro^{b}_{a} have the same output, even if the intended behavior is not the typical one (I could redefine it so subscripts change colors, for instance). Although I could just port the macro using xparse-generic because it works in ConTeXt too, how to define a macro like that the ConTeXt way, i.e., using only ConTeXt macros? Thank you in advance. Jairo :)

3 2

French interface - previous message = wrong title
by Garulfo 25 Jun '20

25 Jun '20

Hi, I try to update and to fill the french content of mult-def.lua. Currently, I have an updated "mult-def.lua" file. 3 questions : 1/ which commands should be executed in order to make the new local interface effective with context 2/ which commands should be executed in order to build a local version of setup-fr.pdf 3/ many commands in setup-fr.pdf are not documented in mult-def.lua where does the additionnal translations should come from ? Thanks a lot for your precious help.

3 3