- ntg-context - Mailing Lists

Re: [NTG-context] Bug with \wordright in LMTX version 2020-08-03 14:25
by Otared Kavian 08 Aug '20

08 Aug '20

Hi Hans, Thanks for the hint which consists in adding an \ifmmode to the definition of \qed. However, as you suggest, one needs some other mechanism in math mode, since with your new definition of \qed the alignment of the formula changes when one adds this close symbol: %%%% begin-example-qed.tex \definesymbol[Fin][\mathematics{\square}] \def\qed{\ifmmode\quad\symbol[Fin]\else\strut\wordright{\symbol[Fin]}\fi} \starttext \startformula a^2 + b^2 = c^2. \stopformula \startformula a^2 + b^2 = c^2. \qed \stopformula One sees that\type{\qed} in the formula changes the alignment of the formula. \qed \stoptext %%%% end-example-qed.tex Thanks a lot for everything: Otared > On 4 Aug 2020, at 13:24, Hans Hagen <j.hagen(a)xs4all.nl> wrote: > > On 8/4/2020 11:17 AM, Otared Kavian wrote: >> Thanks Hans for your explanations. >> The problem I encountered is that, the command \qed is used dozens of time in my text without any issue because it was preceded by something on th eline, but the only place where it was alone after a formula resulted in the error and it was not easy for me to isolate the issue… >> By the way, in mkii it was possible to add \qed on the last line of a math formula, but that does not work anymore: >> \definesymbol[Fin][\mathematics{\square}] >> \def\qed{\strut\wordright{\symbol[Fin]}} >> \starttext >> \startformula >> a^2 + b^2 = c^2. \qed >> \stopformula >> The above formula does not show the close symbol.\qed >> \stoptext >> Is there a way to have something like \qed work in math formulas? > because that's now hwpo wordright works ... > > \def\qed{\ifmmode\quad\symbol[Fin]\else\strut\wordright{\symbol[Fin]}\fi} > > but we probably need something different, something that hooks into display math > > Hans > > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > -----------------------------------------------------------------

3 3

About the numbering of theorems
by Fabrice Couvreur 08 Aug '20

08 Aug '20

Hello, I have a little problem with the numbering of theorems when there is no subsection. I would like to know : Theorem 1.1 Theorem 1.2 Theorem 2.3 Theorem 2.4 Thank you Fabrice %%%% begin example \setuplabeltext[chapter=Chapitre~] \unexpanded\def\Title#1#2{\framed[frame=off,width=fit,align=flushleft]{#1\blank#2}} \startbuffer[mybuffer] \starttheorem \input ward \stoptheorem \stopbuffer \setuphead [chapter] [style=\bfd, align={flushleft,broad}, command=\Title] \setuphead [section] [style=\bfc, distance=\zeropoint, sectionsegments=section, conversion={R}, align={flushleft,broad}, commandbefore={\space\endash\space}] \setuphead [subsection] [sectionsegments=subsection, conversion={n}, style=\bfb, align={flushleft,broad}] \setupenumerations [before={\blank}, after={\blank}, alternative=serried, title=yes, prefix=yes, prefixsegments=chapter, titlestyle=bold, width=broad] \defineenumeration [theorem] [text=Théorème, number=yes, style=italic] \starttext \startchapter [title={First chapter}] \startsection [title={First section}] \startsubsection [title={First subsection}] \dorecurse{2}{\getbuffer[mybuffer]} \stopsubsection \stopsection \stopchapter \startchapter [title={Second chapter}] \startsection [title={Second section}] \dorecurse{2}{\getbuffer[mybuffer]} \stopsection \stoptheorem \stopchapter \stoptext %%%% end example

2 2

teaser
by Hans Hagen 07 Aug '20

07 Aug '20

Hi, I uploaded a new lmtx version ... it has a new mechanism for manipulating boxes: http://www.pragma-ade.com/general/magazines/mag-1105-mkiv.pdf (also in distribution) Of course experimental but I bet that some can think of usage. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

3 9

Registration for 14th ConTeXt Meeting, September 6–12, 2020
by Jano Kula 07 Aug '20

07 Aug '20

Dear all! The 14th ConTeXt Meeting <https://meeting.contextgarden.net/2020/> is in preparation as originally planned. All pre-registered participants are still planning to attend the meeting. The situation is changing every day (mainly travel restrictions), so we have decided to hold the meeting in case the Czech Republic doesn't have red light in most of the countries in September and the number of participants doesn't drop below the critical number. We will not charge a cancellation fee to attendees, if their individual situation changes. In case the meeting is cancelled as a whole in the end, we will ask everybody registered (except students) to donate 20 € minimum to the ConTeXt Group <https://group.contextgarden.net> as sort of collective insurance. The collected money will be used as the cancellation payment to the hosting property. Abstracts <https://meeting.contextgarden.net/2020/abstracts.shtml> have been updated and registration <https://meeting.contextgarden.net/2020/register.shtml> is open until we reach full capacity. See you in Sibřina! Jano

1 0

please explain
by Hans van der Meer 07 Aug '20

07 Aug '20

This MWE is an example of strange font behaviour according to the log and I do not understand what is causing it. ConTeXt complains "check count_components with mkiv" when the word 'suffi' is present (see log message below). Now comes the most strange: remove 'suffi' or shorten to 'suff' and the message goes away. I have put the full set of files inside the zip. dr. Hans van der Meer \setupbodyfont[termes] \starttext %================================================================= ConTeXt versie \contextversion \crlf %================================================================= this here: suffi (but suff is ok!) %================================================================= \starttyping fonts/mkiv/type-imp-texgyre.mkiv' close source > level 3, order 4, name '/Users/hansm/TeX/context/tex/texmf-context/tex/context/fonts/mkiv/type-imp-texgyre.mkiv' fonts > ! fonts > ! check count_components with mkiv ! fonts > ! \stoptyping \stoptext

3 3

Header bottom line vanishing after 87 pages
by Willi Egger 06 Aug '20

06 Aug '20

Hello good morning, I encounter a strange problem when compiling my project. The book has 252 pages, compilation runs without errors. But after 87 pages the bottom frame of the header is turned off. The \setupbackgrounds command is given only once in the preamble. — So I am curious what that can be. I tried to reproduce the problem by a simple 255 page loop, but there the issue does not appear. There is no difference between MKIV and LMTX, no difference in older version and yesteray evening’s version of ConTeXt. My question is whether anybody has an idea how to track down this issue. Kind regards Willi

2 1

Placing a section ending depending on odd/even sectionnumber
by Willi Egger 05 Aug '20

05 Aug '20

Hi, now I have another hurdle to be taken :-) — Depending on the odd or even number of the section I have to place an ornament at the end of the section. I have sofar the following setup: \define\stopmysection {\setups{endsection}} \startsetups endsection \doifelse {\currentheadnumber} %{\headnumber[section][current]}{odd} {even} {\vfil {\bf End of even numbered section} \stopsection% } {\vfil {\bf End of odd numbered section} \stopsection% } \stopsetups \starttext \startsection[title=Ward] \setuppagenumbering[conversion=romannumerals] \input ward \stopmysection \startsection[title=Knuth] \setuppagenumbering[conversion=numbers] \input knuth \stopmysection \stoptext However the the evaluation of the sectionnumber results always in “false”, having therefore always odd as a sectionending. What to change in order to get the desired result? Kind regards Willi

2 2

Re: [NTG-context] About vertical typesetting in ConTeXt
by Jairo A. del Rio 04 Aug '20

04 Aug '20

Thank you a lot, Hans. Indeed, the second solution seems to correctly put text into a vertical flow. However, a serious issue with Mongolian script is the horizontal direction: unlike CJK vertical typesetting, the text columns go from left to right, and the following almost works (\definefont gives no ligatures in my computer so I've used \definefontfamily instead) %\definefont does not work as expected \definefontfamily[main][serif][mongolianwhite][features=mongolian] \setupbodyfont[main,24pt] \defineframed [vertical] [ offset=none, align=flushleft, anchoring=left, foregroundstyle={\setupinterlinespace[40pt]}] \starttext %\MyFont \startframed[vertical] ᠣᠢᠷ᠎ᠠ ᠵᠢᠨ ᠡᠳᠦᠷ᠂ ᠦᠪᠦᠷ ᠮᠣᠩᠭᠣᠯ ᠦᠨ ᠰᠢᠯᠢ ᠵᠢᠨ ᠭᠣᠣᠯ ᠠᠢᠮᠠᠭ ᠦᠨ ᠰᠢᠯᠣᠭᠣᠨ ᠬᠦᠬᠡ ᠬᠣᠰᠢᠭᠣᠨ ᠦ ᠰᠢᠭᠦᠬᠦ ᠬᠣᠷᠢᠶ᠎ᠠ ᠨᠢᠭᠡᠨ ᠬᠦᠴᠦᠷᠬᠡᠭᠯᠡᠨ ᠨᠦᠵᠢᠳᠯᠡᠭᠰᠡᠨ ᠶᠠᠯᠠᠲᠣ ᠬᠡᠷᠡᠭ ᠲᠦ ᠰᠢᠭᠦᠯᠲᠡ ᠬᠢᠪᠡ᠃ ᠰᠢᠭᠦᠨ ᠲᠠᠰᠣᠯᠣᠯᠳᠠ ᠪᠠᠷ᠂ ᠵᠠᠭᠠᠯᠳᠣᠭᠳᠠᠭᠴᠢ ᠡᠷᠬᠢᠮᠲᠦ ᠵᠢ ᠬᠦᠴᠦᠷᠭᠡᠭᠯᠡᠨ᠂ ᠨᠦᠵᠢᠳᠯᠡᠭᠰᠡᠨ ᠶᠡᠯ᠎ᠡ ᠪᠡᠷ ᠭᠣᠷᠪᠠᠨ ᠵᠢᠯ ᠦᠨ ᠬᠣᠭᠣᠴᠠᠭ᠎ᠠ ᠲᠠᠢ ᠬᠣᠷᠢᠬᠣ ᠡᠷᠡᠭᠦᠦ ᠪᠡᠷ ᠰᠢᠳᠬᠡᠭᠰᠡᠨ ᠪᠠᠢᠨ᠎ᠠ᠃ \stopframed \stoptext I've attached two files: the ConTeXt output (results so far) and the expected result (done via LuaLaTeX). As it can be seen, the text lines should go "upwards". I'd just use LuaLaTeX for this specific case, but ConTeXt is too cute... Thank you again, Hans. Sincerely, Jairo. El mar., 4 de ago. de 2020 a la(s) 07:52, Hans Hagen (j.hagen(a)xs4all.nl) escribió: > On 8/4/2020 2:42 PM, Hans Hagen wrote: > > On 8/4/2020 10:32 AM, Jairo A. del Rio wrote: > > > >> http://www.mongolfont.com/en/font/mnglwhiteotf.html > > let me be fast in providing an easier solution (I bet WS would correct > me otherwise): > > \defineframed > [vertical] > [offset=none, > align=flushleft, > anchoring=left, > foregroundstyle={\MyFont\setupinterlinespace[40pt]}] > > \startframed[vertical] > ᠣᠢᠷ᠎ᠠ ᠵᠢᠨ ᠡᠳᠦᠷ᠂ ᠦᠪᠦᠷ ᠮᠣᠩᠭᠣᠯ ᠦᠨ ᠰᠢᠯᠢ ᠵᠢᠨ ᠭᠣᠣᠯ ᠠᠢᠮᠠᠭ ᠦᠨ ᠰᠢᠯᠣᠭᠣᠨ ᠬᠦᠬᠡ > ᠬᠣᠰᠢᠭᠣᠨ ᠦ ᠰᠢᠭᠦᠬᠦ ᠬᠣᠷᠢᠶ᠎ᠠ ᠨᠢᠭᠡᠨ ᠬᠦᠴᠦᠷᠬᠡᠭᠯᠡᠨ ᠨᠦᠵᠢᠳᠯᠡᠭᠰᠡᠨ ᠶᠠᠯᠠᠲᠣ ᠬᠡᠷᠡᠭ ᠲᠦ > ᠰᠢᠭᠦᠯᠲᠡ ᠬᠢᠪᠡ᠃ ᠰᠢᠭᠦᠨ ᠲᠠᠰᠣᠯᠣᠯᠳᠠ ᠪᠠᠷ᠂ ᠵᠠᠭᠠᠯᠳᠣᠭᠳᠠᠭᠴᠢ ᠡᠷᠬᠢᠮᠲᠦ ᠵᠢ ᠬᠦᠴᠦᠷᠭᠡᠭᠯᠡᠨ᠂ > ᠨᠦᠵᠢᠳᠯᠡᠭᠰᠡᠨ ᠶᠡᠯ᠎ᠡ ᠪᠡᠷ ᠭᠣᠷᠪᠠᠨ ᠵᠢᠯ ᠦᠨ ᠬᠣᠭᠣᠴᠠᠭ᠎ᠠ ᠲᠠᠢ ᠬᠣᠷᠢᠬᠣ ᠡᠷᠡᠭᠦᠦ ᠪᠡᠷ > ᠰᠢᠳᠬᠡᠭᠰᠡᠨ ᠪᠠᠢᠨ᠎ᠠ᠃ > \stopframed > > I realized that I already added the anchoring features long ago ... > > Hans > > > hm, only for testing, not for use > > > >> I can rotate boxes in ConTeXt using other methods than those used in > >> LaTeX. However, my main concern is about "translating" the Lua(La)TeX > >> piece to be used in ConTeXt. I've read about "finalizers" in the CLD > >> manual and somewhere online, but I don't know how to access to > >> node.subtype("pdf_literal"). I'll be happy to know about a better > >> solution if ConTeXt offers it so it is accessible to other users. > >> Thank you in advance. > > The problem (or challenge) as usual is not in the coding but in what is > > a reasonable user interface. So, what are the use cases. Her eis one > > solution: > > > > \protected\def\startvertical > > {\dosingleempty\dostartvertical} > > > > \def\dostartvertical[#1]% > > {\begingroup > > \getdummyparameters[width=\textwidth,height=\textheight,#1]% > > \vbox > > orientation 1 > > \doifelsedimension{\dummyparameter{width}}{to > > \dummyparameter{width}}{}% > > \bgroup > > \doifelsedimension{\dummyparameter{height}}{\hsize > > \dummyparameter{height}}{}} > > > > \protected\def\stopvertical > > {\vfill > > \egroup > > \endgroup} > > > > % test > > > > \starttext > > > > \definefont > > [MyFont] > > [file:mnglwhiteotf.ttf*default,mongolian @ 24pt] > > > > \showframe > > > > \startvertical > > \MyFont > > \setupalign[stretch,tolerant,stretch] > > \setupinterlinespace[40pt]% > > ᠣᠢᠷ᠎ᠠ ᠵᠢᠨ ᠡᠳᠦᠷ᠂ ᠦᠪᠦᠷ ᠮᠣᠩᠭᠣᠯ ᠦᠨ ᠰᠢᠯᠢ ᠵᠢᠨ ᠭᠣᠣᠯ ᠠᠢᠮᠠᠭ ᠦᠨ ᠰᠢᠯᠣᠭᠣᠨ ᠬᠦᠬᠡ > > ᠬᠣᠰᠢᠭᠣᠨ ᠦ ᠰᠢᠭᠦᠬᠦ ᠬᠣᠷᠢᠶ᠎ᠠ ᠨᠢᠭᠡᠨ ᠬᠦᠴᠦᠷᠬᠡᠭᠯᠡᠨ ᠨᠦᠵᠢᠳᠯᠡᠭᠰᠡᠨ ᠶᠠᠯᠠᠲᠣ ᠬᠡᠷᠡᠭ ᠲᠦ > > ᠰᠢᠭᠦᠯᠲᠡ ᠬᠢᠪᠡ᠃ ᠰᠢᠭᠦᠨ ᠲᠠᠰᠣᠯᠣᠯᠳᠠ ᠪᠠᠷ᠂ ᠵᠠᠭᠠᠯᠳᠣᠭᠳᠠᠭᠴᠢ ᠡᠷᠬᠢᠮᠲᠦ ᠵᠢ ᠬᠦᠴᠦᠷᠭᠡᠭᠯᠡᠨ᠂ > > ᠨᠦᠵᠢᠳᠯᠡᠭᠰᠡᠨ ᠶᠡᠯ᠎ᠡ ᠪᠡᠷ ᠭᠣᠷᠪᠠᠨ ᠵᠢᠯ ᠦᠨ ᠬᠣᠭᠣᠴᠠᠭ᠎ᠠ ᠲᠠᠢ ᠬᠣᠷᠢᠬᠣ ᠡᠷᠡᠭᠦᠦ ᠪᠡᠷ > > ᠰᠢᠳᠬᠡᠭᠰᠡᠨ ᠪᠠᠢᠨ᠎ᠠ᠃ > > \stopvertical > > > > \page > > > > \startvertical[height=.75\textheight] > > \MyFont > > \setupalign[flushleft] > > \setupinterlinespace[40pt]% > > ᠣᠢᠷ᠎ᠠ ᠵᠢᠨ ᠡᠳᠦᠷ᠂ ᠦᠪᠦᠷ ᠮᠣᠩᠭᠣᠯ ᠦᠨ ᠰᠢᠯᠢ ᠵᠢᠨ ᠭᠣᠣᠯ ᠠᠢᠮᠠᠭ ᠦᠨ ᠰᠢᠯᠣᠭᠣᠨ ᠬᠦᠬᠡ > > ᠬᠣᠰᠢᠭᠣᠨ ᠦ ᠰᠢᠭᠦᠬᠦ ᠬᠣᠷᠢᠶ᠎ᠠ ᠨᠢᠭᠡᠨ ᠬᠦᠴᠦᠷᠬᠡᠭᠯᠡᠨ ᠨᠦᠵᠢᠳᠯᠡᠭᠰᠡᠨ ᠶᠠᠯᠠᠲᠣ ᠬᠡᠷᠡᠭ ᠲᠦ > > ᠰᠢᠭᠦᠯᠲᠡ ᠬᠢᠪᠡ᠃ ᠰᠢᠭᠦᠨ ᠲᠠᠰᠣᠯᠣᠯᠳᠠ ᠪᠠᠷ᠂ ᠵᠠᠭᠠᠯᠳᠣᠭᠳᠠᠭᠴᠢ ᠡᠷᠬᠢᠮᠲᠦ ᠵᠢ ᠬᠦᠴᠦᠷᠭᠡᠭᠯᠡᠨ᠂ > > ᠨᠦᠵᠢᠳᠯᠡᠭᠰᠡᠨ ᠶᠡᠯ᠎ᠡ ᠪᠡᠷ ᠭᠣᠷᠪᠠᠨ ᠵᠢᠯ ᠦᠨ ᠬᠣᠭᠣᠴᠠᠭ᠎ᠠ ᠲᠠᠢ ᠬᠣᠷᠢᠬᠣ ᠡᠷᠡᠭᠦᠦ ᠪᠡᠷ > > ᠰᠢᠳᠬᠡᠭᠰᠡᠨ ᠪᠠᠢᠨ᠎ᠠ᠃ > > \stopvertical > > > > \stoptext > > > > But it's kind of a quick hack interface. We can have alignment, > > interlinespace etc parameters to. Maybe definable verticals and so. > > > > Hans > > > > ps. for chinese one would probably kick in an extra feature > > > > % \definefontfeature > > % [vertical] > > % [vertical={% > > % orientation=3,% > > % down=.1,% > > % right=.1,% > > % ranges={% > > % cjkcompatibility,% > > % cjkcompatibilityforms,% > > % cjkcompatibilityideographs,% > > % cjkcompatibilityideographssupplement,% > > % cjkradicalssupplement,% > > % % cjkstrokes,% > > % cjksymbolsandpunctuation,% > > % cjkunifiedideographs,% > > % cjkunifiedideographsextensiona,% > > % cjkunifiedideographsextensionb,% > > % cjkunifiedideographsextensionc,% > > % cjkunifiedideographsextensiond,% > > % cjkunifiedideographsextensione,% > > % cjkunifiedideographsextensionf,% > > % }% > > % }] > > > > and maybe some extreme hz would work out well too. > > > > ----------------------------------------------------------------- > > Hans Hagen | PRAGMA ADE > > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > > ----------------------------------------------------------------- > > > ___________________________________________________________________________________ > > > > > If your question is of interest to others as well, please add an entry > > to the Wiki! > > > > maillist : ntg-context(a)ntg.nl / > > http://www.ntg.nl/mailman/listinfo/ntg-context > > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > > archive : https://bitbucket.org/phg/context-mirror/commits/ > > wiki : http://contextgarden.net > > > ___________________________________________________________________________________ > > > > > > -- > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > ----------------------------------------------------------------- >

1 0

Re: [NTG-context] About vertical typesetting in ConTeXt
by Jairo A. del Rio 04 Aug '20

04 Aug '20

Hi, list. I've found a (sort of) way to do LTL typesetting in Lua(La)TeX based on "chickenize", a LuaTeX package. The font used is available here; http://www.mongolfont.com/en/font/mnglwhiteotf.html %Just for testing in LaTeX \documentclass{article} \usepackage{luacode} \usepackage{fontspec} \setmainfont{Mongolian White}[Renderer=Harfbuzz,Script=Mongolian] \begin{luacode*} -- How do I do this in ConTeXt? userdata = userdata or {} userdata.mongolian = function(head) --Ugly hackish line rotation rot = node.new(node.id("whatsit"),node.subtype("pdf_literal")) rot2 = node.new(node.id("whatsit"),node.subtype("pdf_literal")) for line in node.traverse_id(0,head) do w = line.width/65536*0.99625 rot.data = "-1 0 0 -1 "..w.." 0 cm" rot2.data = "-1 0 0 -1 "..-w.." 0 cm" line.head = node.insert_before(line.head,line.head,node.copy(rot)) node.insert_after(line.head,node.tail(line.head),node.copy(rot2)) end return head end \end{luacode*} \def\startmongolian{\directlua{luatexbase.add_to_callback("post_linebreak_filter", userdata.mongolian, "mongolian")}} \def\stopmongolian{% \par\directlua{luatexbase.remove_from_callback("post_linebreak_filter", "mongolian")}% } \usepackage{graphicx} \begin{document} \rotatebox{90}{% \parbox{8cm}{% \startmongolian \begin{flushleft} ᠣᠢᠷ᠎ᠠ ᠵᠢᠨ ᠡᠳᠦᠷ᠂ ᠦᠪᠦᠷ ᠮᠣᠩᠭᠣᠯ ᠦᠨ ᠰᠢᠯᠢ ᠵᠢᠨ ᠭᠣᠣᠯ ᠠᠢᠮᠠᠭ ᠦᠨ ᠰᠢᠯᠣᠭᠣᠨ ᠬᠦᠬᠡ ᠬᠣᠰᠢᠭᠣᠨ ᠦ ᠰᠢᠭᠦᠬᠦ ᠬᠣᠷᠢᠶ᠎ᠠ ᠨᠢᠭᠡᠨ ᠬᠦᠴᠦᠷᠬᠡᠭᠯᠡᠨ ᠨᠦᠵᠢᠳᠯᠡᠭᠰᠡᠨ ᠶᠠᠯᠠᠲᠣ ᠬᠡᠷᠡᠭ ᠲᠦ ᠰᠢᠭᠦᠯᠲᠡ ᠬᠢᠪᠡ᠃ ᠰᠢᠭᠦᠨ ᠲᠠᠰᠣᠯᠣᠯᠳᠠ ᠪᠠᠷ᠂ ᠵᠠᠭᠠᠯᠳᠣᠭᠳᠠᠭᠴᠢ ᠡᠷᠬᠢᠮᠲᠦ ᠵᠢ ᠬᠦᠴᠦᠷᠭᠡᠭᠯᠡᠨ᠂ ᠨᠦᠵᠢᠳᠯᠡᠭᠰᠡᠨ ᠶᠡᠯ᠎ᠡ ᠪᠡᠷ ᠭᠣᠷᠪᠠᠨ ᠵᠢᠯ ᠦᠨ ᠬᠣᠭᠣᠴᠠᠭ᠎ᠠ ᠲᠠᠢ ᠬᠣᠷᠢᠬᠣ ᠡᠷᠡᠭᠦᠦ ᠪᠡᠷ ᠰᠢᠳᠬᠡᠭᠰᠡᠨ ᠪᠠᠢᠨ᠎ᠠ᠃ \end{flushleft} \stopmongolian } } \end{document} I can rotate boxes in ConTeXt using other methods than those used in LaTeX. However, my main concern is about "translating" the Lua(La)TeX piece to be used in ConTeXt. I've read about "finalizers" in the CLD manual and somewhere online, but I don't know how to access to node.subtype("pdf_literal"). I'll be happy to know about a better solution if ConTeXt offers it so it is accessible to other users. Thank you in advance. Regards, Jairo El mié., 10 de jun. de 2020 a la(s) 03:11, Jairo A. del Rio ( jairoadelrio6(a)gmail.com) escribió: > I totally ignored this document until now. As it looks really promising > (to me), I'll make some attempts first. In my almost-one-year experience > with ConTeXt, a manual or a discussion in the list usually foreshadows a > solution. ConTeXt never ceases to amaze me with its tricks and quirks. > Thank you very much, Hans. > > Jairo :) > > El mié., 10 de jun. de 2020 a la(s) 02:30, Hans Hagen (j.hagen(a)xs4all.nl) > escribió: > >> On 6/10/2020 7:49 AM, Jairo A. del Rio wrote: >> > Hi list! I'm curious about vertical typesetting in ConTeXt. As far as I >> > know, LuaTeX supports four text directions, but LTL is broken for >> Manchu >> > script (letters are displayed unjoined in LTL mode) and LuaMetaTeX does >> > not support vertical directions anymore, at least as primitives. >> > >> > I found the following solution: >> > >> > https://tex.stackexchange.com/a/140972/193767 >> > I reproduce the code (in XeLaTeX), just in case >> > >> > |% !TEX TS-program = >> > >> xelatex\documentclass{scrartcl}\usepackage{fontspec}\newfontfamily{\dcw}[]{DaicingWhite}%\begin{document}\noindentLine >> >> > above\\% to demonstrate that the lines are being stacked as >> > normal\rotatebox{-90}{%\XeTeXupwardsmode1\\% successive lines will be >> > stacked upwards instead of downwards\begin{minipage}{4em}% this will be >> > the vertical length of the Mongolian section{\dcw% Font: Daicing White1 >> > ᠮᠠᠨᠵᡠ ᡤᡳᠰᡠᠨ\\% direct Unicode input of Manchu letters2 ᠮᠠᠨᠵᡠ ᡤᡳᠰᡠᠨ }% >> > End font\end{minipage}\XeTeXupwardsmode0 }% End rotatebox\noindentLine >> > underneath \end{document}| >> > >> > >> > and I see XeTeX uses the primitive |\XeTeXupwardsmodeand some other >> > tricks to get the proper display of Manchu text, so maybe MKII can do >> > the magic using XeTeX as an engine. How would one use ConTeXt MKIV for >> > this task? Is it possible to emulate \XeTeXupwardsmode in ConTeXt as a >> > first step? Thank you very much. >> I admit that I have no clue about what xetex does in that departmentbut >> you're right that in lmtx the vertical directions are not supported. The >> main reason is that it didn't really integrates well in the way pages >> are constructed. >> >> Vertical typesetting (afaiks) involves two things: one character wide >> columns and rotated glyphs. The first can be handled by the macro >> package and the second by a combination of engine and macro package. >> >> Already for quite a while there are the basics for a more advanced >> vertical subsystem but it's typically one of these things that I explore >> and then set aside till some users show up who need it and are willing >> to spend time on discussing and testing intertfaces. After all, most of >> this tex stuff is kind of a hobby and it's easy to find new interesting >> experiments. >> >> Anyway, you can get some ideas in chapter 6 of: >> >> http://www.pragma-ade.com/general/manuals/followingup.pdf >> >> but as said, probably no one ever read that. The question isnot so much >> if it can be done, but how to integrate it. >> >> (There's more stuff waiting for being used but we leave that for users >> to run into and demand support for.) >> >> Hans >> >> ----------------------------------------------------------------- >> Hans Hagen | PRAGMA ADE >> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands >> tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl >> ----------------------------------------------------------------- >> >

2 1

check if inside footnote
by Henning Hraban Ramm 04 Aug '20

04 Aug '20

Hi, me again... Is there a check if a macro is called from inside of a footnote, like a system mode *footnote? (Same with captions?) In my current project, index entries should get italic page numbers if they occurr inside of a footnote (or a caption, but that is rare). I’m using different shortcuts for both cases (that call \index with or without processor), but some paragraphs are very confusing (many long footnotes, or footnotes within footnotes), and I could avoid manually analyzing the structure if my macro could determine on its own if it’s called from a footnote. Not-working example: \setupinteraction[state=start] \defineprocessor[kursiv][style=italicface] \define[1]\Idx{\doifmodeelse{*footnote}{\index{#1}}{\index[kursiv->]{kursiv->#1}}#1} \starttext Text --- \index[C]{A}{B}\footnote{Inside\index{FN}}\index{BF} --- \placeregister[index][criterium=all] \stoptext This also shows the text-running-into-footnotes problem with both of my ConTeXt versions: ConTeXt ver: 2020.01.30 14:13 MKIV beta fmt: 2020.4.12 ConTeXt ver: 2020.07.27 16:30 LMTX fmt: 2020.7.28 Hraban

2 3