- ntg-context - NTG Mailing Lists

How to Create Asymmetrical Continuous Columns in ConTeXt?
by seyal.zavira＠gmail.com 18 Jan '24

18 Jan '24

Hi all, I have a lengthy text that I wish to seamlessly incorporate using the \input{mytext} command in ConTeXt. Additionally, I aim to present it in asymmetrical continuous columns, where the text flows over several pages. I have tried paragraphs and columns, but in paragraphs, I can't flow text across several pages without manually breaking it, and in columns, I haven't found a way to implement asymmetric columns. How can I achieve this layout in ConTeXt? this is a MWE but it does not work properly: \definecolumnset[mymixedcolumn][n=2] \setupcolumnset[mymixedcolumn:1][width=4cm] \setupcolumnset[mymixedcolumn:2][width=7cm] \starttext \startcolumnset[mymixedcolumn] \dorecurse{5}{ \input{knuth} } \stopcolumnset \stoptext also is there a mechanism to automatically continue text between desired frames? For example, is there a way to write a function that, if the text reaches the end of the line and there is not enough space for another line in that frame, it continues the text in another frame that is already specified? in other word How do you make text flow to another part of a page? Thanks in advance. Best regards, Seyal

1 0

[ \copypages ]
by vm 18 Jan '24

18 Jan '24

Is there a (hidden) option that allows for changing the font color of external included pdfs \copypages[file.pdf][color=blue] does not work as intended ;-) .Floris

4 3

Fwd: Re: x mark symbol and general symbol guide
by Gerion Entrup 18 Jan '24

18 Jan '24

Hans already answered my question. Thank you! Gerion ---------- Forwarded Message ---------- Subject: Re: [NTG-context] x mark symbol and general symbol guide Date: Freitag, 13. Oktober 2023, 18:13:42 CEST From: Hans Hagen <j.hagen@...> To: Gerion Entrup <gerion.entrup@...> On 10/13/2023 2:33 PM, Gerion Entrup wrote: > Hi, > > I recently tried to typeset a table with checkmarks and x marks. > \checkmark exists but is there a predefined x mark symbol (\xmark does > not work)? > > In general: For LaTeX there exists the very helpful comprehensive LaTeX symbol list [1]. > Is there a similar documentation for ConTeXt somewhere? \usesymbols[fontawesome] \startTEXpage[offset=1ts] \symbol[fontawesome-solid][times]\quad \symbol[fontawesome-solid][check] \stopTEXpage you can run symb-imp-fontawesome and get a list Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- -------------------------------------------------------------

3 6

Re: Math alignment issue
by Otared Kavian 17 Jan '24

17 Jan '24

Hi Mikael, Thank you for your reply. When I typeset the example you sent me, that is %begin 240117-1-bis.tex \definemathsimplealign[alignedcases] [left={\startmathfenced[cases]}, right=\stopmathfenced, align={1:right,2:left,3:left}, strut=yes] \setupformula [location=left] \starttext \samplefile{knuthmath} \startplaceformula \startformula \startalignedcases \NC u'(t) - \nabla \cdot (a(x)\nabla u) + Vu \NC = 0 \NC \mtext{bla bla bla} \NR \NC u(x,0) \NC = u_0(x) \NC \mtext{bla bla} \NR \NC u(t,\sigma) \NC = 0 \NC \mtext{bla bla bla bla} \NR \stopalignedcases \stopformula \stopplaceformula \samplefile{knuthmath} \startplaceformula \startformula \startalign[location=packed,n=2,m=2,align={1:right,2:left},fences=cases] \NC u'(t) - \nabla \cdot (a(x)\nabla u) + Vu \NC = 0 \NC \NC \mtext{bla bla bla} \NR \NC u(x,0) \NC = u_0(x) \NC \NC \mtext{bla bla} \NR \NC u(t,\sigma) \NC = 0 \NC \NC \mtext{bla bla bla bla} \NR \stopalign \stopformula \stopplaceformula \samplefile{knuthmath} \stoptext % end 240117-1-bis.tex I get something different than the PDF you sent me: the formulas run into the text just above them, as you can see in the attached PDF. I am using ConTeXt LMTX version 2024.01.08 on MacOS 11.7.10. I don’t see what is wrong with my installation… Best regards: Otared > On 17 Jan 2024, at 09:47, Mikael Sundqvist <mickep(a)gmail.com> wrote: > > Hi Otared, > > I'm not sure how you get that code, since you do not show the source. > From last upload, there is location=packed for align, so now that can > be used "inline" in formulas. See attached. I hope it helps. > > Best, Mikael > > On Tue, Jan 16, 2024 at 9:41 PM Otared Kavian <otared(a)gmail.com> wrote: >> >> Hi Mickael, >> >> I wish you a happy new year ! >> I apologize for writing you outside the mailing list: this is du eto the fact that I am attaching two screenshots in order to show the problem I encounter, and these documents cannot go through the mailing list. >> >> In a document written a year and half ago I have the following definition: >> >> \definemathmatrix[alignedcases] >> [align={right,left,left}, >> distance=3pt, >> left={\left\{}, >> right={\right.}, >> style=\displaystyle] >> in order to typeset multi-lines formulas regrouped with a left brace. This is analogous to math-cases, but I need three columns instead of two. >> >> When the alignment in maths changed I changed the above definition to the following: >> >> \definemathsimplealign[alignedcases] >> [left={\startmathfenced[cases]}, >> right=\stopmathfenced, >> align={1:right,2:left,3:left}, >> strut=yes] >> >> >> The result of the typesetting with LMTX in 2022 is shown in the attached document « math-align-2022.pdf », >> >> But when the same documentis typeset with the latest version from 2024-01-08, it does not show the formulas correctly, as one can see in the attached screenshot « math-align-2024-01-08.pdf ». >> >> I cannot reproduce the issue on a short document, but since there have been some changes in the way the math alignment is treated now, I wonder whether you can help me how to change my definitions accordingly. >> In order to let th elist be informed, once the issue may be solved without the screenshots, I may post a message there. >> >> Thanks in advance, and best regards: Otared >> >> >> >> >> > <240117-1.mkxl><240117-1.pdf> Otared Kavian e-mail: otared(a)gmail.com Phone: +33 6 88 26 70 95

3 5

How to obtain older versions of LMTX?
by Otared Kavian 17 Jan '24

17 Jan '24

Hi all, In order to circumvent a bug in the latest versions (2023-09-26 and 2024-01-08) of LMTX regarding math alignments, I am trying to get an older version of LMTX (from before September 2023) for MacOS ARM. Does any one know how to proceed? Thanks in advance. Best regards: Otared

3 6

Cron <context@cgl> /var/www/aanhet.net/context/bin/cron/context-mirror
by root＠ntg.nl 17 Jan '24

17 Jan '24

receiving incremental file list ./ ctan.lsr document-2.htm download-1.htm download-2.htm logo-ade.png logo-cts.png logo-pod.png rss.xml show-fil.pdf context/latest/ context/latest/cont-lmt.zip context/latest/cont-mpd.zip context/latest/cont-ppc.zip context/latest/cont-sci.zip context/latest/cont-tmf.zip context/latest/cont-tst.7z context/latest/cont-tst.tar.xz context/latest/cont-tst.zip general/manuals/ general/manuals/lowlevel-alignments.pdf general/manuals/primitives.pdf sent 183,174 bytes received 44,030,633 bytes 3,844,678.87 bytes/sec total size is 578,750,422 speedup is 13.09 Running archiver: New dir: /var/www/aanhet.net/context//htdocs/archives/context-2024-01-18.01 245921431 /var/www/aanhet.net/context//htdocs/archives/context-2024-01-18.01/latest 126745317 /var/www/aanhet.net/context//htdocs/archives/context-2024-01-18.01/current 372670844 /var/www/aanhet.net/context//htdocs/archives/context-2024-01-18.01 372670844 total

1 0

Re: Math alignment issue
by Otared Kavian 17 Jan '24

17 Jan '24

Hi Mikael, I installed anew the latest version and I get still the same bizarre result with math alignment. Please can someone on the list typeset the following in order to see whether the result is correct or not ? %begin 240117-1-bis.tex \definemathsimplealign[alignedcases] [left={\startmathfenced[cases]}, right=\stopmathfenced, align={1:right,2:left,3:left}, strut=yes] \setupformula [location=left] \starttext \samplefile{knuthmath} \startplaceformula \startformula \startalignedcases \NC u'(t) - \nabla \cdot (a(x)\nabla u) + Vu \NC = 0 \NC \mtext{bla bla bla} \NR \NC u(x,0) \NC = u_0(x) \NC \mtext{bla bla} \NR \NC u(t,\sigma) \NC = 0 \NC \mtext{bla bla bla bla} \NR \stopalignedcases \stopformula \stopplaceformula \samplefile{knuthmath} \startplaceformula \startformula \startalign[location=packed,n=2,m=2,align={1:right,2:left},fences=cases] \NC u'(t) - \nabla \cdot (a(x)\nabla u) + Vu \NC = 0 \NC \NC \mtext{bla bla bla} \NR \NC u(x,0) \NC = u_0(x) \NC \NC \mtext{bla bla} \NR \NC u(t,\sigma) \NC = 0 \NC \NC \mtext{bla bla bla bla} \NR \stopalign \stopformula \stopplaceformula \samplefile{knuthmath} \stoptext % end 240117-1-bis.tex Thanks in advance: Otared > On 17 Jan 2024, at 12:09, Mikael Sundqvist <mickep(a)gmail.com> wrote: > > Could your installation be broken? > > /Mikael > > Den ons 17 jan. 2024 11:41Otared Kavian <otared(a)gmail.com <mailto:otared@gmail.com>> skrev: > Hi Mikael, > > Actually it seems that the math alignment stuff has been broken even in version 2023-09-26, since I get also something incorrect, as you can see in the attached PDF. > > Many thanks for your help: Otared > > > >> On 17 Jan 2024, at 11:06, Mikael Sundqvist <mickep(a)gmail.com <mailto:mickep@gmail.com>> wrote: >> >> Hi, >> >> Then there was a problem with the last update. Maybe there will be a new upload soon that works better for you. >> >> /Mikael >> >> Den ons 17 jan. 2024 10:37Otared Kavian <otared(a)gmail.com <mailto:otared@gmail.com>> skrev: >> Hi Mikael, >> >> Thank you for your reply. When I typeset the example you sent me, that is >> >> %begin 240117-1-bis.tex >> >> \definemathsimplealign[alignedcases] >> [left={\startmathfenced[cases]}, >> right=\stopmathfenced, >> align={1:right,2:left,3:left}, >> strut=yes] >> >> \setupformula >> [location=left] >> >> \starttext >> >> \samplefile{knuthmath} >> >> \startplaceformula >> \startformula >> \startalignedcases >> \NC u'(t) - \nabla \cdot (a(x)\nabla u) + Vu \NC = 0 \NC \mtext{bla bla bla} \NR >> \NC u(x,0) \NC = u_0(x) \NC \mtext{bla bla} \NR >> \NC u(t,\sigma) \NC = 0 \NC \mtext{bla bla bla bla} \NR >> \stopalignedcases >> \stopformula >> \stopplaceformula >> >> \samplefile{knuthmath} >> >> \startplaceformula >> \startformula >> \startalign[location=packed,n=2,m=2,align={1:right,2:left},fences=cases] >> \NC u'(t) - \nabla \cdot (a(x)\nabla u) + Vu \NC = 0 \NC \NC \mtext{bla bla bla} \NR >> \NC u(x,0) \NC = u_0(x) \NC \NC \mtext{bla bla} \NR >> \NC u(t,\sigma) \NC = 0 \NC \NC \mtext{bla bla bla bla} \NR >> \stopalign >> \stopformula >> \stopplaceformula >> >> \samplefile{knuthmath} >> >> \stoptext >> % end 240117-1-bis.tex >> >> I get something different than the PDF you sent me: the formulas run into the text just above them, as you can see in the attached PDF. I am using ConTeXt LMTX version 2024.01.08 on MacOS 11.7.10. I don’t see what is wrong with my installation… >> >> Best regards: Otared >> >> >> >>> On 17 Jan 2024, at 09:47, Mikael Sundqvist <mickep(a)gmail.com <mailto:mickep@gmail.com>> wrote: >>> >>> Hi Otared, >>> >>> I'm not sure how you get that code, since you do not show the source. >>> From last upload, there is location=packed for align, so now that can >>> be used "inline" in formulas. See attached. I hope it helps. >>> >>> Best, Mikael >>> >>> On Tue, Jan 16, 2024 at 9:41 PM Otared Kavian <otared(a)gmail.com <mailto:otared@gmail.com>> wrote: >>>> >>>> Hi Mickael, >>>> >>>> I wish you a happy new year ! >>>> I apologize for writing you outside the mailing list: this is du eto the fact that I am attaching two screenshots in order to show the problem I encounter, and these documents cannot go through the mailing list. >>>> >>>> In a document written a year and half ago I have the following definition: >>>> >>>> \definemathmatrix[alignedcases] >>>> [align={right,left,left}, >>>> distance=3pt, >>>> left={\left\{}, >>>> right={\right.}, >>>> style=\displaystyle] >>>> in order to typeset multi-lines formulas regrouped with a left brace. This is analogous to math-cases, but I need three columns instead of two. >>>> >>>> When the alignment in maths changed I changed the above definition to the following: >>>> >>>> \definemathsimplealign[alignedcases] >>>> [left={\startmathfenced[cases]}, >>>> right=\stopmathfenced, >>>> align={1:right,2:left,3:left}, >>>> strut=yes] >>>> >>>> >>>> The result of the typesetting with LMTX in 2022 is shown in the attached document « math-align-2022.pdf », >>>> >>>> But when the same documentis typeset with the latest version from 2024-01-08, it does not show the formulas correctly, as one can see in the attached screenshot « math-align-2024-01-08.pdf ». >>>> >>>> I cannot reproduce the issue on a short document, but since there have been some changes in the way the math alignment is treated now, I wonder whether you can help me how to change my definitions accordingly. >>>> In order to let th elist be informed, once the issue may be solved without the screenshots, I may post a message there. >>>> >>>> Thanks in advance, and best regards: Otared >>>> >>>> >>>> >>>> >>>> >>> <240117-1.mkxl><240117-1.pdf> >> >> Otared Kavian >> e-mail: otared(a)gmail.com <mailto:otared@gmail.com> >> Phone: +33 6 88 26 70 95 >> >> >> >> > > Otared Kavian > e-mail: otared(a)gmail.com <mailto:otared@gmail.com> > Phone: +33 6 88 26 70 95 > > > > Otared Kavian e-mail: otared(a)gmail.com Phone: +33 6 88 26 70 95

1 0

issue with fonts in current latest (2024.01.08 11:23)
by Pablo Rodriguez 16 Jan '24

16 Jan '24

Dear list, I have the following sample: \definefontfamily[mainface][rm][TeX Gyre Pagella] \definefontfamily[coverface][rm][TeX Gyre Termes] \setupbodyfont[mainface, 16pt] \starttext \startmakeup[standard][style=\bf] \switchtobodyfont[coverface] This is a cover. \stopmakeup This is text. \stoptext Compiling the sample with current latest (2024.01.08 11:23), LMTX puts Latin Modern Roman (no bold) and MkIV puts Termes (no bold). The results with previous latest (2023.09.26 18:19), cover is in Termes bold with LMTX and in Termes regular with MkIV. I guess there might be an issue here. Could anyone confirm this? Many thanks for your help, Pablo

3 4

Looking for itemize help
by Jim 16 Jan '24

16 Jan '24

I have \setupwhitespace [big] so that I get "a blank line" between paragraphs. I would like to *not* have "blank lines" before and after my items. For example, if there is more "paragraph text" after the last item I would like to see this structure: ------------------------------------------------------------------ Some text preceding the list of items: a. Item one. b. Second item. This sentence is part of the same paragraph. The next paragraph starts here... ------------------------------------------------------------------ and if there is no "paragraph text" after the last item, I'd like to see this structure: ------------------------------------------------------------------ Some text preceding the list of items: a. Item one. b. Second item. The next paragraph starts here... ------------------------------------------------------------------ Try as I might, I can't find the right options to give to \startitemize. The closest I have found is to start with \startitemize[a,nowhite] but that prevents the "blank line" even in the second case above, which is not what I want. Further, 'packed' and 'joinedup' seem to behave identically here, both leaving "a blank line" before the first item and after the last item. Clearly, I can force a blank line before the following paragraph with a \vskip<the right amount>, but that seems like a crude way to do it. Can someone either enlighten me on either (a) the Right ConTeXt Way to do this, or (b) a document that would tell me this, if I knew to read it? I've looked in the wiki, the not-so-short intro to ConTeXt, and "ConTeXt: an excursion" with no luck. Thanks. Jim

6 12

Wiki update
by Taco Hoekwater 16 Jan '24

16 Jan '24

Hi all, I just updated the wiki ConTeXt to 20240108. The <context> tag on the wiki by default uses luametatex (LMTX), but if you want luatex instead (MKIV), you can still do that by using <context mode=“mkiv”>. There have been some problems recently because Hans’ new binaries needed a newer version of various system libraries. I fixed that this morning after Hraban spotted the issue, but it means that there may be wiki pages with ConTeXt processing errors in them now. These can be recognised by either the colorised “error” output, or some cryptic “copy failed” message instead of the actual output. If you see one of those pages, Edit it. For the colorised “error” output you need to make a tiny change to the example itself (because that “error” output is correct as far as the wiki software can tell, so you have to force it to regenerate). For the “copy failed” case, you just have to start an edit and then immediately save again. The wiki will autogenerate any missing examples on save. Best wishes, Taco — Taco Hoekwater E: taco(a)bittext.nl genderfluid (all pronouns)

1 0