- ntg-context - NTG Mailing Lists

inverted (french) quotation marks for german documents
by schwertner＠t-online.de 09 May '03

09 May '03

Hello, I'm starting with Context and have the following question. I want to achieve the inverted (french) quotation marks for german documents. For example: >>househusband<< With latex or pdflatex I use ">househusband"< or \frqq househusband\flqq but this doesn't work in Context. Many thanks for any help, Helmut ********************************************************* Helmut Schwertner eMail: schwertner(a)t-online.de

3 2

fillinfield
by Sytse Knypstra 09 May '03

09 May '03

Dear ConTeXt users, I just started to try \fillinfield as described in the up-todate manual 1998/1. For some names it worked properly, but for my own name it didn't. (ConTeXt ver: 2002.8.23 fmt: 2002.11.25 int: dutch mes: dutch) Here is the example: %%%%%%%%%%%%%%%% \steluitvoerin[pdftex] \stelinteractiein [status=start] \starttekst Mijn naam is: \invulveld{Sytse} Zijn naam is: \invulveld{Wytse} \stoptekst %%%%%%%%%%%%%%%% Sytse Knypstra

1 0

Re: [NTG-context] Magazine: OpenType Pro fonts in ConTeXt
by Bruce D'Arcus 09 May '03

09 May '03

Also, I've noticed odd kerning with apostrophes, in both Jenson Pro and, it seems, in your sample on page 1 where the word "Adobe's" looks quite odd. Any ideas what's going on with that? A mistake in the metric files? And how would this be corrected; go into the kerning pairs and adjust them for this glyph? Bruce

2 3

Re: [NTG-context] Magazine: OpenType Pro fonts in ConTeXt
by Adam Lindsay 08 May '03

08 May '03

[copied to list] Bruce D'Arcus said this at Thu, 8 May 2003 16:13:12 -0400: >How would you deal with the margin-kerning hand-tuning favored by Bill >McClain and Achim? Would these just be separate files for each font >input into the main typescriptfile? I like good hanging (I prefer "punctuation", myself), too. Bill or Achim could define their own hanging preferences in their own fonthandling in a file that's input. They can then do a mass find/replace of "handling=pure" and put their own named font handling in. Cheers, adam -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Adam T. Lindsay atl(a)comp.lancs.ac.uk Computing Dept, Lancaster University +44(0)1524/594.537 Lancaster, LA1 4YR, UK Fax:+44(0)1524/593.608 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

1 0

Font h__ revisited.
by John Culleton 08 May '03

08 May '03

No virtuous deed goes unpunished. I have been using old-fashioned \font commands with Context because the other was just too confusing. But I htought it was time to ger religion. So I copied the following pretty much verbatim from a manual: \definefontsynonym [Serif] [Palatino] \definefontsynonym [Palatino][uplr8r] [encoding=default] \definebodyfont [14.4pt] [rm] [tf=Serif sa 1] ... \switchtobodyfont[14.4pt] ...and I get Computer Modern according to Acrobat Reader. ---------------------------------- But when I use this: \font\rm=uplr8r at 12pt \font\bf=uplb8r at 14.4pt \font\bs=uplbo8r at 17.3pt \rm I get the font I want where I want it. --------------------------------------------------- So what am I messing up in the first example? John Culleton ____________________________________________________________ Free 20MB Web Site Hosting and Personalized E-mail Service! Get It Now At Doteasy.com http://www.doteasy.com/et/

7 14

EC-Fonts
by Wolfgang Werners-Lucchini 08 May '03

08 May '03

Hallo! What have I to do ,to use the EC-Fonts (from J. Knappen). I always get CM, even if I use ec-encoding. Grüße, Wolfgang

3 4

makempy
by Wolfgang Werners-Lucchini 08 May '03

08 May '03

Hallo! 'makempy' uses 'acroread' as default under Unix. How can I change this, when calling makempy indirectly by texexec. gruß, Wolfgang

2 1

Modes
by varheit＠gmx.de 07 May '03

07 May '03

Hello, I compile a document with texexec --pdf --mode=<somemode> ..., and I want to access whatever is specified for <somemode> in the document as literal text. So if I run texexec --pdf --mode=screen ... I want something like "this document was processed in screen mode" to show up in the text. How can this be done? -- +++ GMX - Mail, Messaging & more http://www.gmx.net +++ Bitte lächeln! Fotogalerie online mit GMX ohne eigene Homepage!

3 4

Re: [NTG-context] Inclusion of flow chart
by Hans Hagen 07 May '03

07 May '03

At 11:17 07/05/2003 +1100, you wrote: >Hi all, > >I have definitely not been flooded by answers. I am getting the impression >that this forum might >not have been the best one to ask (i.e. I have a practical problem which >has little bearing with >implementation aspects / bugs / new features of Context). hm, normally questions get answered (willy often does the flow chart ones, but he may be off for a few days; begin may are also problematic days: many holidays, national thingies and so; personally i'm just back from the polish tex conference) i forwarded the mail to willy -) the best hack i can come up with is: % output=pdftex \usemodule[chart] \starttext \startFLOWchart[boxes] \startFLOWcell \name {a} \location {1,1} \shape {action} \text {\ss A} \stopFLOWcell \startFLOWcell \name {b} \location {2,1} \shape {action} \text {\ss B} \stopFLOWcell \startFLOWcell \name {c} \location {3,1} \shape {action} \text {\ss C} \stopFLOWcell \stopFLOWchart \FLOWchart[boxes] \startFLOWchart[arrows] \includeFLOWchart[boxes] \startFLOWcell \name {1-2} \location {1,1} \shape {none} \connection[rl]{b} \stopFLOWcell \startFLOWcell \name {2-3} \location {2,1} \shape {none} \connection[rl]{c} \stopFLOWcell \stopFLOWchart \FLOWchart[arrows] \stoptext when i have time i'll think about some extension Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE | pragma(a)wxs.nl Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- information: http://www.pragma-ade.com/roadmap.pdf documentation: http://www.pragma-ade.com/showcase.pdf -------------------------------------------------------------------------

2 1

Re: [NTG-context] Inclusion of flow chart
by emmanuel.rialland＠sgib.com 07 May '03

07 May '03

Hi all, I have definitely not been flooded by answers. I am getting the impression that this forum might not have been the best one to ask (i.e. I have a practical problem which has little bearing with implementation aspects / bugs / new features of Context). I have gone through comp.text.tex, but it seems to be heavily oriented towards latex. Would you have any other direction I could go to and get some assistance? Thanks for showing a door (;-)), Emmanuel Thanks Hans. Apologies if the discussion doesn't flow very much, I am writing from down under. In fact, what I would ideally like to do is the following: 1- Define a template with the boxes without any arrows. 2- Write numbered lists describing arrows that would be generated on top of the template. The overview might look like the following (with some bogus macro names): % Somewhere in a template file % Template for the boxes: \StartMPTemplate[Boxes] % % ----- ----- ----- % ! ! ! ! ! ! % ! A ! ! B ! ! C ! % ----- ----- ----- % \startFLOWcell \name {a} \location {1,1} \shape {action} \text {\ss A} \stopFLOWcell \startFLOWcell \name {b} \location {2,1} \shape {action} \text {\ss B} \stopFLOWcell \startFLOWcell \name {c} \location {3,1} \shape {action} \text {\ss C} \stopFLOWcell \StopMPTemplate ------------------------------------------------------------------ % This creates the first chapter \startcomponent Right \Chapter{Every to the right} % Inserts a float with the proper figure and the proper arrows using the difinitions coming afterward \StartMPGraphWithTemplate[Right] \IncludeFLOWchartTemplate[Boxes] \StopMPGraphWithTemplate % Place the float \placefigure [here,force] [fig:chart1] {Chart One} {\framed{\FLOWchart[Right]}} % normal itemised text that will be numbered and will dynamically add tyhe arrows to the figure [Right] \startitemizeWithFLOWchart \arrow[labels=number,from=a,fromside=r,to=b,toside=l] This is the first arrow. \arrow[labels=number,from=b,fromside=r,to=c,toside=l] This is the second arrow. \stopitemizeWithFLOWchart % This is the result % % ----- ----- ----- % ! ! 1 ! ! 2 ! ! % ! A !---->! B !---->! C ! % ! ! ! ! ! ! % ----- ----- ----- % % The text should appear below the float as \startitemize would have done % 1 This is the first arrow. % 2 This is the second arrow. ------------------------------------------------------------------ % This creates the next chapter \startcomponent Left \Chapter{Every to the left} % Inserts a float with the proper figure and the proper arrows using the difinitions coming afterward \StartMPGraphWithTemplate[Left] \IncludeFLOWchartTemplate[Boxes] \StopMPGraphWithTemplate % normal itemised text that will be numbered and will dynamically add tyhe arrows to the figure [Right] \startitemizeWithFLOWchart \arrow[labels=number,from=c,fromside=r,to=a,toside=l] This is the top arrow. \stopitemizeWithFLOWchart % This is the result % !------------------------------ % ! ----- ----- ----- ! % ! ! ! ! ! ! ! ! % -->! A ! ! B ! ! C !--! % ! ! ! ! ! ! % ----- ----- ----- % % The idea is that everything is dynamic: - if the template changes, all the graphs get redrawn with the boxes at their new place. The arrows get moved as needed. - if the itemised text is changed (say the 'second arrow' line is written before the 'first arrow'), then on the graph, the arrow from a to b would be numbered 2 and the arrow from b to c would become 1. What I tried is the definition you see at the top for the boxes. Then, to generate the first graph, I would have: --------------------------------------------------- \startFLOWchart[chart] % Inserts template \includeFLOWchart[template][x=1,y=1] % Additional information on top of cell a \startFLOWcell \name {a} \connection [rl] {b} \comment [t] {\ss 1} \stopFLOWcell % Additional information on top of cell b \startFLOWcell \name {b} \connection [rl] {c} \comment [t] {\ss 2} \stopFLOWcell \stopFLOWchart --------------------------------------------------- All I get is the template without any arrows. I thought about trying to generate massive metafun macros. But I want the itemised text to be text and not a graph. Bottom line: is it possible? realistic? I have been using MS Word so far to do that sort of thing. It has been quite tedious to reflect any change in the box structure: 10 charts means 10 charts to re-edit. As a bonus question that should be easier. Is it possible to draw other sorts of arrows: i would like to draw straght line arrows that could follow a diagonal (say go north-east instead of east first then north), or circular arrows like: % % ----- % ! ! % ! !<-- % ----- \ % \ % | % ----- / % ! ! / % ! A !<-- % ----- As usual any help is welcome. Emmanuel Hans Hagen <pragma(a)wxs.nl> To: ntg-context(a)ntg.nl Sent by: cc: Emmanuel RIALLAND/au/socgen@socgen ntg-context-admin Subject: Re: [NTG-context] Inclusion of flow chart @ntg.nl 30/04/2003 05:17 Please respond to ntg-context At 18:49 24/04/2003 +1100, emmanuel.rialland(a)sgib.com wrote: >As you might have guessed, this breaks everything. > >Has anybody an idea as to how I could do that? can you make a minimal example? Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE | pragma(a)wxs.nl Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- information: http://www.pragma-ade.com/roadmap.pdf documentation: http://www.pragma-ade.com/showcase.pdf ------------------------------------------------------------------------- _______________________________________________ ntg-context mailing list ntg-context(a)ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context _______________________________________________ ntg-context mailing list ntg-context(a)ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context ************************************************************************** Have you checked our new corporate website at http://www.sgib.com ? The information contained herein is confidential and is intended solely for the addressee(s). It shall not be construed as a recommendation to buy or sell any security. Any unauthorized access, use, reproduction, disclosure or dissemination is prohibited. Neither SGIB nor any of its subsidiaries or affiliates shall assume any legal liability or responsibility for any incorrect, misleading or altered information contained herein. **************************************************************************

2 1