- ntg-context - NTG Mailing Lists

lmtx update
by Hans Hagen 19 Aug '21

19 Aug '21

Hi, Here are the highlights of todays update: - somewhat more compact tuc files, not for all documents, but it can accumulate; also less memory used then; i could bring down an extreme 2000 page 5 column doc tuc file down to 5% -- it was 70 MB; for the luametatex manual it reducec the tuc more than 30%; hard to tell if there will be an associated performance hit, but i'm sure thomas will complain if that's the case - more mp-tex-lua interfacing upgraded plus extra preliminary chapter for luametafun about extensions - for taco - a slightly more compact cache files for fonts with many (pseudo) ligatures; hopefully no side effects (nothing that can't be fixed fast if noted); quite probably no performance hit and maybe even some room for optimization (not done yet) - a split in the cache directory for luametatex so that we can more easilly experiment without interference (so, although the above works in mkiv it's not enabled there currently) - some minor things (also in the process of splitting the codebase) - no real changes in / additions to the luametatex binary (we're in cosmetics mode now) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

2 2

paper dimensions for TEXpage
by Pablo Rodriguez 19 Aug '21

19 Aug '21

Dear list, I have the following sample: \definelayer[hi][x=.5\paperwidth, y=.5\paperheight] \setupbackgrounds[page][background=hi] \starttext \setlayer[hi]{hi} \startTEXpage[offset=10em] \null \stopTEXpage \stoptext I don’t get the layer in the TEXpage. How could I get it with the TEXpage dimensions? Many thanks for your help, Pablo -- http://www.ousia.tk

2 4

Different footers for frontmatter and bodymatter
by noib3 18 Aug '21

18 Aug '21

I'd like to have two different footer setups: one for the frontmatter (titlepage and table of contents) where the page number in roman numerals is reported as a single centered footer. Another for the bodymatter where the chapter is on the left footer and the pagenumber is on the right. I can switch between roman numerals and numbers with ``` \defineconversionset [frontpart:pagenumber] [] [romannumerals] \defineconversionset [bodypart:pagenumber] [] [numbers] ``` but I can't figure out how to have two different footer setups. Right now I have ``` \setupfootertexts [chapter] [pagenumber] ```

2 1

Unicode normalization and Hebrew in ConTeXt
by Joey McCollum 18 Aug '21

18 Aug '21

I am typesetting a document in Hebrew that includes pointing (e.g., vowels, shin and sin dots, dagesh, etc.) using ConTeXt. The Hebrew text that I want to typeset has been normalized into Unicode's NFC canonical form. It is well-known that the Unicode canonical ordering of Hebrew points conflicts with the recommended mark ordering of specific points based on their functions (see https://www.sbl-site.org/Fonts/SBLHebrewUserManual1.5x.pdf for more on this topic). Thankfully, many typesetting engines automatically reorder the points to ensure that they are combined according to the specifications of many fonts. I'm pretty sure that XeLaTeX is one of these, as it typesets Hebrew letters with multiple points correctly even when the Hebrew text is in NFC form. My question is, can ConTeXt with LuaTeX handle the same situation correctly? In the following minimal example, ConTeXt typesets pointed Hebrew correctly when the characters are in the typographically recommended order, but not when they are in Unicode canonical order: ``` %Setup Hebrew text font: \definefontfeature[f:pointedhebrew][default][ ccmp=yes, mark=yes, script=hebr ] \definefontfamily[hebrew] [rm] [SBL Hebrew] [features=f:pointedhebrew] %Set the body font: \setupbodyfont[hebrew] %Set up right-to-left alignment: \setupalign[r2l] \starttext %Characters after normalization, in Unicode canonical order (bet + segol + dagesh + final nun): בֶּן %A word with characters in typographically recommended order (bet + dagesh + segol + final nun): בֶּן \stoptext ``` I typeset this using ConTeXt version 2020.03.10, as released with TeXLive 2020. I got the SBL Hebrew font from https://www.sbl-site.org/educational/BiblicalFonts_SBLHebrew.aspx. According to the font's user manual (see the link above the MWE), the font should be able to combine the marks to form the correct glyph regardless of their order after the consonant, but that doesn't seem to be the case here. I also tried using the predefined "hebrew" featureset, but that did not change anything. Is there some other OpenType feature or featureset I need to enable to fix this, or is there some module or option I can include to get ConTeXt to typeset Unicode-normalized Hebrew as if it were ordered in the recommended way, like XeLaTeX does? I see that the uninormalize module is mentioned in the thread "XeLaTeX, LuaLaTeX, fontspec, unicode and normalization" on TeX Stack Exchange ( https://tex.stackexchange.com/questions/229044/xelatex-lualatex-fontspec-un…) can that be used with ConTeXt? Thank you, Joey

2 10

file to buffer
by Hans van der Meer 17 Aug '21

17 Aug '21

Is it possible to retrieve the contents of a file directly into a buffer? On the Wiki I could not find such a command. That is, equivalent to something like: \startbuffer[from file] contents of the file \stopbuffer dr. Hans van der Meer

3 2

lua
by Hans van der Meer 17 Aug '21

17 Aug '21

Where is this message on luacondition 733 coming from? I would be glad to get rid of it. The message does not pinpoint the problem location enough for me to find its cause. close source > level 2, order 7, name './modules-docs.tex' close source > level 1, order 7, name 'cont-yes.mkiv' (\end occurred when luacondition 733 on line 8 was incomplete) dr. Hans van der Meer

3 5

Using Lua to format lecture titles
by noib3 17 Aug '21

17 Aug '21

I'm trying to create a new lecture environment starting from the base section. I'd like its title to be `Lecture <number>: <title>` if a title is provided, and `Lecture <number>` if it isn't. This title should also be reported in the left footer and in the table of contents. This is the code I have so far: ``` \definehead [lecture] [section] \setuphead [lecture] [ command=\Lecture, style=\bfc, ] \setuplabeltext [lecture={Lecture}] \define[2]\Lecture{\ctxlua{ userdata.format_lecture_title({ label = context.labeltext('lecture'), number = [==[#1]==], title = [==[#2]==], }) }} \setupfootertexts [\ctxlua{ userdata.format_lecture_title({ label = context.labeltext('lecture'), number = context.getmarking({'lecturenumber'}), title = context.getmarking({'lecture'}), }) }] [pagenumber] \startluacode userdata = userdata or {} function userdata.format_lecture_title(args) if args.title and args.title ~= '' then context('%s %s: %s', args.label, args.number, args.title) else context('%s %s', args.label, args.number) end end \stopluacode \setupcombinedlist [content] [list={lecture}] \setuplist [lecture] [ alternative=c, command=\Lecture, % this seems to have no effect? ] \starttext \completecontent % Both title and left footer should be 'Lecture 1: Foo' \startlecture [title={Foo}] Foo bar baz \stoplecture \page % Both title and left footer should be 'Lecture 2' \startlecture [] Foo bar baz \stoplecture \stoptext ``` Unfortunately none of them are reported correctly. The title in the body is formatted simply as `Lecture`, the one in the left footer is formatted as `Lecture<number><title>`, and the one in the table of contents isn't affected at all. What am I doing wrong?

2 1

compression for multimedia objects
by Pablo Rodriguez 17 Aug '21

17 Aug '21

Hi Hans, some days ago (after the patch from https://mailman.ntg.nl/pipermail/ntg-context/2021/103011.html) I included two mp4 files in a PDF document. They where so generated, that they could be compressed in a zip file from 254MB into less than 25MB. The resulting PDF file was less than 25MB. With the current latest, compression for multimedia objects is disabled. The same PDF document takes about 254MB. I don’t know whether this is intended. In that case, could we have an option to compress embedded multimedia objects? (I know that those mp4 files are crappy, but I can’t control the crap others generate.) Many thanks for your help, Pablo -- http://www.ousia.tk

2 2

How not to display the header of the chapter page on the page with the table of contents ?
by Fabrice Couvreur 16 Aug '21

16 Aug '21

Hello, Wolfgang created a heading https://mailman.ntg.nl/pipermail/ntg-context/2021/102870.html for the chapters of my book. How can I prevent this header from appearing on the page with the table of contents ? Thanks Fabrice

3 8

Adjustment in the table of contents
by Fabrice Couvreur 16 Aug '21

16 Aug '21

Hi, I wish to have the table of contents as the attached image. The result is almost as expected except for the margin of the subsection. \setuplist [chapter,section,subsection] [width=fit,distance=\spaceamount] \setuplist [chapter] [alternative=b] \setuplist [chapter][style=bold] \setuplist [section] [margin=1em] \setuplist [subsection] [margin=2.75em] Thanks Fabrice

2 1