- ntg-context - NTG Mailing Lists

Debian repository
by Alex Lubberts 17 May '07

17 May '07

Hi all, Seems like the apt source "deb http://www.tug.org/texlive/Debian/ context/" stopped working. Does anybody know what's going on? Regards, Alex

3 2

Can't get header repetition with multipage table
by Jean-Philippe Rey 17 May '07

17 May '07

Hello folks, I can't get repeated headers in a multipage table. I tried the following: %------------------------------------------------ \starttext \starttablehead \HL \VL Column 1 \VL Column 2 \VL\SR \HL \stoptablehead \starttabletail \HL \VL Column 1 \VL Column 2 \VL\SR \HL \stoptabletail \starttables[|l|l|] \dorecurse{100}{\VL value \VL value \VL\SR} \VL value \VL value \VL\SR \stoptables \stoptext %------------------------------------------------ I get a multipage table, but the header appears only at the beginning of the table and doesn't repeat itself on each page. Same for the tail part. I believe I am using the last ConTeXt version: TeXExec | TeXExec | version 6.2.0 - 1997-2006 - PRAGMA ADE/POD TeXExec | TeXUtil | version 9.1.0 - 1997-2005 - PRAGMA ADE/POD TeXExec | CtxTools | version 1.3.3 - 2004/2006 - PRAGMA ADE/POD TeXExec | ConTeXt ver: 2007.04.03 13:01 MKII fmt: 2007.4.7 int: english/english This is pdfTeXk, Version 3.141592-1.40.3 (Web2C 7.5.6) I tried first http://live.contextgarden.net/ but ConTeXt live seems to be down at the moment, I always get the message "the file 'texexec' is not found". Any help most welcome. -- Jean-Philippe Rey Professeur informatique - École Centrale Paris jean-philippe.rey(a)ecp.fr 92295 Châtenay-Malabry Cedex - France

3 4

verbatim on wiki
by Andrea Valle 17 May '07

17 May '07

Hi, I've added the discussion of the approach I used for the recently posted doc on http://wiki.contextgarden.net/Verbatim_text As it is a bit "heretical" and I don't want to widespread bad practices :) please let me know if it is of some interest or if I have to move it on another place etc Best -a- -------------------------------------------------- Andrea Valle -------------------------------------------------- CIRMA - DAMS Università degli Studi di Torino --> http://www.cirma.unito.it/andrea/ --> andrea.valle(a)unito.it -------------------------------------------------- I did this interview where I just mentioned that I read Foucault. Who doesn't in university, right? I was in this strip club giving this guy a lap dance and all he wanted to do was to discuss Foucault with me. Well, I can stand naked and do my little dance, or I can discuss Foucault, but not at the same time; too much information. (Annabel Chong) -------------------------------------------------- Andrea Valle -------------------------------------------------- CIRMA - DAMS Università degli Studi di Torino --> http://www.cirma.unito.it/andrea/ --> andrea.valle(a)unito.it -------------------------------------------------- I did this interview where I just mentioned that I read Foucault. Who doesn't in university, right? I was in this strip club giving this guy a lap dance and all he wanted to do was to discuss Foucault with me. Well, I can stand naked and do my little dance, or I can discuss Foucault, but not at the same time; too much information. (Annabel Chong)

2 3

ConTeXt release 2007.04.17
by Taco Hoekwater 17 May '07

17 May '07

Hi all, I am pleased to announce that the new ConTeXt release from Hans Hagen can be downloaded as of now from the Pragma ADE website or one of its mirrors. http://www.pragma-ade.com/context/current/cont-tmf.zip http://context.aanhet.net/context/current/cont-tmf.zip http://mirror.contextgarden.net/context/current/cont-tmf.zip The current release has version 2007.04.17 As usual, there is an html page with more detailed release notes available on the Wiki, see: http://wiki.contextgarden.net/Release_Notes Highlights: * mptopdf and texexec (once again) support the handling of LaTeX files * allow blocking of installed programs for texutil * fix the handling of external graphics in xetex * various low-level fixes and extensiosn for multicolumn handling * bugfix for disappearing footnotes * support for TeX-Gyre Hermes * For some other small changes, see the wiki page Happy TeXing, Taco Hoekwater

2 2

ConTeXt on Excursion: translations in the Garden
by Vit Zyka 16 May '07

16 May '07

Hi all, there is a new plant in the Garden: http://wiki.contextgarden.net/ConTeXt_on_Excursion%2C_translations It gathers translations of the beginner's manual ConTeXt on Excursion (authors Ton Otten and Hans Hagen). Currently there exist Dutch, English, and Czech versions. Czech version is a team work of translators (Ján Buša, Jiří Hrbek, Martina Plachá, Petr Tesařík, and Vít Zýka) supported by Czechoslovac TUG (CSTUG). We use as a model the English version (although the original is the Dutch one). A reader can find several additional sections dealing with localization and information sources. Non Czech readers have also some benefic as a side effect of this project. The English version was slightly actualized and fixed some bugs. All versions are acompanied by actual macro syntax and listed in the command index. Sources of all three versions are stored on the public SVN repository as a part of the ConTeXt manual project (https://foundry.supelec.fr/projects/contextman/) administrated by Taco. There is a makefile for an easy manual generation. It is ready for adding new stuff/actualizing/fixing bugs and even for new language translation. On the Garden page we can find breaf instructions for that. If you have any question, please do not hesitate to ask me. Best reading Vit

10 21

texexec message suppression.
by John R. Culleton 15 May '07

15 May '07

for some time now I have been fussing over the volume of uneccessary (to me) informational messages spewed forth by texexec, in particular the long list of font scripts repeated sometimes 8 or 9 times. Since I don't even use most of these scripts I wonder why they show up on every pass of every compile. The --silent parameter to texexec should suppress some or all of these message, or so the manual says. But it doesn't. I get the same long list of messages, repeated over and over. Ideally I could suppress informational messages but keep the warning messages, per the traditional unix > and 2> output routings for sysout and syserr. But texexec does not appear to make the distinction. Routing all output to /dev/null is a trick that I use sometimes, but if the run errors off then it just hangs with no message. Are there any clever workarounds I have missed? Is there a setting somewhere in my texlive instllation that I can tweak? Should I do surgery on texexec itself? (Never fooled with Ruby, but there is always a first time.) -- John Culleton Able Indexing and Typesetting Precision typesetting (tm) at reasonable cost. Satisfaction guaranteed. http://wexfordpress.com _________________________________________________________________ Need personalized email and website? Look no further. It's easy with Doteasy $0 Web Hosting! Learn more at www.doteasy.com

4 4

XYPic
by Dirard Mikdad 15 May '07

15 May '07

Hallo, I want to convert my thesis (which I wrote in plain tex) to ConTeXt. Unfortunately the process fails because my documents contain some commutative diagrams made in Xypic. Is it possible to convert xy code to something that ConTeXt can understand? Thanks, Dirard

3 16

Underline the headertext with a thinrule
by Bert Trüger 14 May '07

14 May '07

Hi again, luigi, thanks for your tips. I simply want to put a \thinrule underneath the headertext in textwidth. My setup is: \setupheadertexts[chapter][\pagenumber][section][\pagenumber] \setupheader[after=\thinrule] \setuphead[subsubsection][number=no,alternative=text,indenttext=yes,textstyle=bold] \definetext[chapter][footer][pagenumber] \setuphead[chapter][header=high,footer=chapter,page=yes] \setuphead[blank][state=empty] This way I get a \thinrule starting in the left margin in textwidth under an odd page. I would like the headertext with chapter and pagenumber underlined with \thinrule on every odd page, except it is blank or the beginning of a new chapter, and the same with section and pagenumber in the header for every even page, except it is blank or the beginning of a new chapter -- a simple underlined headtext like in many books. Thanks for your help Bert

2 1

non-integer bodyfont size
by Sanjoy Mahajan 14 May '07

14 May '07

I'm a bit confused about font sizes. I had a bunch of missing \Delta symbols in inline math (e.g. $\Delta x$), which I tracked down to \setupbodyfont[10.5pt] The non-integral point size works for text but not for math (the \Delta turned into a backquote). How to fix that? type-siz.tex has several sections to which I could add \definebodyfontenvironment or \definebodyfont lines. Which sections would I add to? Or can I put the additions outside of that file? And, most crucially, what are the magic lines :-) Thanks for suggestions, which I'll wikify. -Sanjoy

2 2

39e NTG bijeenkomst
by Willi Egger 14 May '07

14 May '07

Beste leden, De NTG bijeenkomst op 8 juni in de Faculteit Diergeneeskunde in Utrecht komt dichter bij. We zullen de dag besteden aan aspecten rond fonts en taal. Onderwerpen zullen zijn: - Fonts/ taal -- XeTeX - Fonts -- TeXlive - Fonts -- LuaTeX - Font features in OTF - Inventarisatie van problemen in connectie met fonts en taal De volgende bijeenkomst is de gelegenheid bij uitstek, om informatie op te doen maar ook om ter plekke ervaringen met elkaar te delen. Bijv. welke fonts gebruik je, wat zou je verbeterd willen zien, wat zijn je verwachtingen. Dit is een kans om wensen kenbaar te maken. Een korte presentatie, waarin jou probleem uiteengezet wordt kan een uitstekende ophanger zijn, om de inventarisatie van verbeter punten te illustreren. Voor vragen en aanmeldingen: meld je bij de secretaris! Willi Egger Secretaris NTG w.egger(a)boede.nl

1 0