- ntg-context - Mailing Lists

mptopdf
by David Arnold 11 Dec '08

11 Dec '08

All, I sent this to OS X TeX list, but perhaps I can get some guidance here? All, After installing MacTeX (textlve2008), mptopdf fails: pstricks $ mptopdf bruce This is pdfTeXk, Version 3.1415926-1.40.9 (Web2C 7.5.7) %&-line parsing enabled. [MP to PDF] (./bruce.0{/Users/darnold/Library/texmf/fonts/map/pdftex/ updmap/pdf tex.map}) [1] kpathsea: Running mktexpk --mfmode / --bdpi 600 --mag 1+0/600 --dpi 600 rm-lmr12 mktexpk: don't know how to create bitmap font for rm-lmr12. kpathsea: Appending font creation commands to missfont.log. !pdfTeX error: pdftex (file rm-lmr12): Font rm-lmr12 at 600 not found ==> Fatal error occurred, no output PDF file produced! This is pdfTeXk, Version 3.1415926-1.40.9 (Web2C 7.5.7) %&-line parsing enabled. [MP to PDF] (./bruce.1{/Users/darnold/Library/texmf/fonts/map/pdftex/ updmap/pdf tex.map}) [1] kpathsea: Running mktexpk --mfmode / --bdpi 600 --mag 1+0/600 --dpi 600 rm-lmr12 mktexpk: don't know how to create bitmap font for rm-lmr12. kpathsea: Appending font creation commands to missfont.log. !pdfTeX error: pdftex (file rm-lmr12): Font rm-lmr12 at 600 not found ==> Fatal error occurred, no output PDF file produced! MPtoPDF 1.3.3 : bruce.* is converted to bruce-0.pdf + bruce-1.pdf I tried: tlmgr update context No good. Same error as above after update. Any suggestions? david

2 1

\framed question
by Alan STONE 11 Dec '08

11 Dec '08

Hi, How do you get a frame's topframe overlap with the layout header "topframe" ? topspace -------------------------------------------- <--- frame's topframe = layout header "topframe" | header | -------------------------------------------- -------------------------------------------- | | | text | -- Best, Alan * TeX engine = LuaTeX *ConTeXt minimals ver: 2008.11.10 21:40 MKIV fmt: 2008.11.21 int: english/english * Ubuntu 8.04 Hardy Heron

1 0

texexec (and context) stops when using \externalocp
by Khaled Hosny 10 Dec '08

10 Dec '08

Trying to get some sort of 'implicit' bidi with luatex, I though of using an (extenal) OCP filter as it is much easier than messing with luatex nodes, and it respects TeX grouping. The attached example loads the do_bidi.py script as an \externalocp, it works fine with plain luatex, but not with 'texexec', using 'context' I get: MtxRun | fatal error, message: luatex: execution interrupted Any ideas? Is there a lua equivalent to \externalocp ? Regards, Khaled -- Khaled Hosny Arabic localizer and member of Arabeyes.org team

2 2

Context doesn't work
by Michael Talbot-Wilson 10 Dec '08

10 Dec '08

I've installed Context and attempted $ texexec fig3_2.tex The response is: the file 'texexec.rb' is not found setuptex was run and TEXROOT is correctly set. texexec is: #!/bin/sh texmfstart texexec.rb "$@" There seems to be nothing there which would enable the script to be located. Does texexec have to be changed to state the full path to the script? Does that have to be done with anything else?

3 3

Re: [NTG-context] how to get thick and thin borders working in tables (ConTeXt)
by Lars Huttar 10 Dec '08

10 Dec '08

On 12/9/2008 12:04 PM, Wolfgang Schuster wrote: > > Am 09.12.2008 um 17:48 schrieb Lars Huttar: > >> Hello, >> >> We are using ConTeXt (with XeTeX engine) to typeset some tables that >> have borders (rules) between cells. >> >> In the previous edition of the book (which was not done in TeX), some of >> the lines between table cells were double, others single. This was done >> to show grouping of columns and rows. We have been told that in TeX, or >> at least in ConTeXt, you can't do double rules (we'd be happy to be >> corrected on that point), so we have been trying to use thick and thin >> lines to show grouping. >> >> Thick or thin lines work fine if applied to whole tables or whole cells, >> but when there are cells with thick rules on some sides and thin rules >> on other sides, it gets confused. >> >> For example, we tried >> (a) \setupTABLE[c][4][leftframe=on,rulethickness=0.5mm] >> to set the left border of the fourth column to be thick. This worked. >> But then if we use >> (b) \setupTABLE[c][4][rightframe=on,rulethickness=0.25mm] >> to set the right border of the same column to be thin, it overrides the >> thickness of both left and right borders, so setting (a) is lost. >> >> In other words, we can't seem to get a given cell to have a thick border >> on one side and a thin border on the other side. (Well, we could fake it >> in some cases by setting rulethickness for an adjacent cell, but that >> adjacent cell would then have to have thick borders on all sides.) >> >> Does anybody know if it's possible to do this in ConTeXt? or in TeX? >> >> Thanks for any ideas, >> Lars >> >> P.S. >> Incidentally, if you set the bottom border of row 1 and the top border >> of row 2 each to be thick, the result is additive: you get a >> doubly-thick border. > > I can provide a patch for ConTeXt to draw rules with different > thickness on each side but I can't assure it will work in the future. > > With metapost you can nearly all types of borders you want. > > \startuseMPgraphic{table:frame:double} > draw OverlayBox enlarged -\the\dimexpr\linewidth/2\relax ; % outer frame > draw OverlayBox enlarged -2pt ; % inner frame > setbounds currentpicture to OverlayBox ; > \stopuseMPgraphic > > \startuseMPgraphic{table:frame:all} > draw OverlayBox enlarged -\the\dimexpr\linewidth/2\relax ; > setbounds currentpicture to OverlayBox ; > \stopuseMPgraphic > > \startuseMPgraphic{table:frame:left} > linecap := squared ; > draw leftboundary OverlayBox withpen pencircle scaled 2 ; > setbounds currentpicture to OverlayBox ; > \stopuseMPgraphic > > \startuseMPgraphic{table:frame:right} > linecap := squared ; > draw rightboundary OverlayBox withpen pencircle scaled 2 ; > setbounds currentpicture to OverlayBox ; > \stopuseMPgraphic > > \startuseMPgraphic{table:frame:top} > linecap := squared ; > draw topboundary OverlayBox withpen pencircle scaled 2 ; > setbounds currentpicture to OverlayBox ; > \stopuseMPgraphic > > \startuseMPgraphic{table:frame:bottom} > linecap := squared ; > draw bottomboundary OverlayBox withpen pencircle scaled 2 ; > setbounds currentpicture to OverlayBox ; > \stopuseMPgraphic > > \defineoverlay[table:frame:double][\useMPgraphic{table:frame:double}] > > \defineoverlay[table:frame:all] [\useMPgraphic{table:frame:all}] > \defineoverlay[table:frame:left] [\useMPgraphic{table:frame:left}] > \defineoverlay[table:frame:right] [\useMPgraphic{table:frame:right}] > \defineoverlay[table:frame:top] [\useMPgraphic{table:frame:top}] > \defineoverlay[table:frame:bottom][\useMPgraphic{table:frame:bottom}] > > \starttext > > \startbuffer > \bTABLE[frame=off,offset=2ex] > \bTR > \bTD One \eTD > \bTD Two \eTD > \bTD Three \eTD > \eTR > \bTR > \bTD Four \eTD > \bTD Five \eTD > \bTD Six \eTD > \eTR > \bTR > \bTD Seven \eTD > \bTD Eight \eTD > \bTD Nine \eTD > \eTR > \eTABLE > \stopbuffer > > \start > \setupTABLE[background={table:frame:double}] > \getbuffer > \stop > \blank > > \start > \setupTABLE[background={table:frame:all}] > \setupTABLE[c][first][background={table:frame:all,table:frame:left}] > \setupTABLE[c][last][background={table:frame:all,table:frame:right}] > \setupTABLE[r][first][background={table:frame:all,table:frame:top}] > \setupTABLE[r][last][background={table:frame:all,table:frame:bottom}] > \setupTABLE[first][first][background={table:frame:all,table:frame:left,table:frame:top}] > > \setupTABLE[last][first][background={table:frame:all,table:frame:right,table:frame:top}] > > \setupTABLE[first][last][background={table:frame:all,table:frame:left,table:frame:bottom}] > > \setupTABLE[last][last][background={table:frame:all,table:frame:right,table:frame:bottom}] > > \getbuffer > \stop > > \stoptext > > Wolfgang > > > Thanks for the very detailed example! We should be able to apply this to our document. I'm copying it to the list because I think it would be valuable for posterity. Thanks to Aditya too for the reply. Regards, Lars -- Lars Huttar

1 1

backward-incompatible behavior of Palatino and modern
by Sanjoy Mahajan 09 Dec '08

09 Dec '08

I texexec'ed a one-page file that I hadn't compiled for almost a year (preparing for the next offering of the course). The font sizes increased, resulting in a two-page PDF file. The one-page result, which is what I expected, came from ConTeXt 2008.01.02 (MkII), for which I had selected font sizes to fit it onto one page. I couldn't find that release in the museum, so it was probably 2007.12.31 with my patches. I downloaded the cont-tmf for 2007.12.31, and it too produced the expected one-page PDF file. Whereas current versions produce a two-page file, either with 2008.10.31 from the Debian packages and with 2008.11.10 on live.contextgarden.net. I'm not sure which behavior (2007 or 2008) is correct. Below is a minimal example testfile.tex producing only a few lines instead of a whole page, but it illustrates the differences. With the 2007.12.31 version, the lines fits within the frame (from \showframe). With the new versions, the "Approximation" extends outside the frame, and the "The Art" gets split onto separate lines. Commenting out the "\setupbodyfont [palatino,11pt]" line makes the two versions identical. But the original example uses Palatino text, so I cannot do that for the long-term solution. I've attached 'good' and 'bad' PDF files. If the new version is correct, I'll retune the font sizes to make it fit, and it's no big deal. But I'm reporting the issue in case the example has exposed an unexpected change in ConTeXt over the last year. -Sanjoy ======= cut here: testfile.tex ==================== \setuppapersize[letter,landscape][letter,landscape] \setuplayout[height=fit,margin=0pt,width=fit, backspace=0.7in,cutspace=0.7in,topspace=0in,bottomspace=-0.2in] \setuppagenumbering[location=] \usetypescript [palatino][\defaultencoding] \setupbodyfont [palatino,11pt] \showframe \starttext \raggedleft \setupbodyfont[modern,54pt]\ss {\bfa 6.055J/2.038J\hfill The Art of}% \break \baselineskip=19pt% \setupbodyfont[modern,50.7pt]% \bfd Approximation \stoptext ======= cut here: testfile.tex ====================

2 2

how to get thick and thin borders working in tables (ConTeXt)
by Lars Huttar 09 Dec '08

09 Dec '08

Hello, We are using ConTeXt (with XeTeX engine) to typeset some tables that have borders (rules) between cells. In the previous edition of the book (which was not done in TeX), some of the lines between table cells were double, others single. This was done to show grouping of columns and rows. We have been told that in TeX, or at least in ConTeXt, you can't do double rules (we'd be happy to be corrected on that point), so we have been trying to use thick and thin lines to show grouping. Thick or thin lines work fine if applied to whole tables or whole cells, but when there are cells with thick rules on some sides and thin rules on other sides, it gets confused. For example, we tried (a) \setupTABLE[c][4][leftframe=on,rulethickness=0.5mm] to set the left border of the fourth column to be thick. This worked. But then if we use (b) \setupTABLE[c][4][rightframe=on,rulethickness=0.25mm] to set the right border of the same column to be thin, it overrides the thickness of both left and right borders, so setting (a) is lost. In other words, we can't seem to get a given cell to have a thick border on one side and a thin border on the other side. (Well, we could fake it in some cases by setting rulethickness for an adjacent cell, but that adjacent cell would then have to have thick borders on all sides.) Does anybody know if it's possible to do this in ConTeXt? or in TeX? Thanks for any ideas, Lars P.S. Incidentally, if you set the bottom border of row 1 and the top border of row 2 each to be thick, the result is additive: you get a doubly-thick border.

2 1

Building tables at runtime via --mode= option
by Bart C. Wise 09 Dec '08

09 Dec '08

I'm trying to build a table in a project that will be built based on a commandline parameter. Currently, I'd like to use the "--mode=<>" command. However, I've run into a number of snags that I have attempted to solve without any luck. I've included some sample code of what I would like to do. I can do all of what I need using \doifmodeelse, etc. However, I'm looking for a more elegeant solution. Any hints/solutions are welcomed! Problems: 1) \currentmode: I cannot use this variable in my file, but it works in the source code. Question: Is the mode option okay, or is there a better way? 2) CellWidth (below) needs to be a floating point dimension, based the size of the paper. So I need to divide the size of the paper (\textwidth) by a number and make sure it stays as a dimension. 3) I tried to use \getnumber[Rounds] to span a number of columns ( \bTD[nc=\getnumber[Rounds]]) but this would not compile. Here's the error: Runaway argument? Rounds=\plusone \ifnum \tblny =\plusone \ifnum \currentcol >\maximumcol \ETC. ! Paragraph ended before \getnumber was complete. Sample: \definenumber[Rounds] \setnumber[Rounds]{6} % desire: \setupnumber[Rounds]{\currentmode} % and verify that it's a number between a given range. % \currentmode comes back as undefined \definenumber[TotalCol] \setnumber[TotalCol]{\getnumber[Rounds] + 2} \def\CellWidth{0.625in} % desire: based on textwidth: \textwidth / \getnumber[TotalCol] % Needs to be floating point \starttext Rounds: \getnumber[Rounds]\crlf TotalCol: \getnumber[TotalCol]\crlf CellWidth: \CellWidth\crlf \bTABLE[align={middle,lohi},strut=no,width=\CellWidth] % Row 1 \bTR[frame=off] \bTD\eTD \bTD[nc=6] Title\eTD %desire: \bTD[nc=\getnumber[Rounds]] Title\eTD \eTR %Row 2 \bTR \bTD\eTD \dorecurse{\getnumber[Rounds]}{\expanded{\bTD\recurselevel\eTD}} \bTD\eTD \eTR %Row 3 \bTR \dorecurse{\getnumber[TotalCol]}{\expanded{\bTD\recurselevel\eTD}} \eTR \eTABLE \stoptext Thanks! Bart

1 0

Gentium package (was: minimals and greek font)
by Mojca Miklavec 09 Dec '08

09 Dec '08

On Wed, Oct 29, 2008 at 3:05 PM, Alan BRASLAU wrote: > Hello, > > What needs to be done to include greek fonts on top of the minimal > installation? Thank you. > > example: > \usemodule[greek] > \starttext > \greek{kalamos} > \stoptext Hello, Thomas has just prepared a new font package (before leaving for a few days) with support for Gentium: http://tug.ctan.org/tex-archive/fonts/gentium/ I'll add it to minimals, but you may play with it already. The contents of Greek module will be adapted once he comes back, but you can use it in standard ways. \usetypescriptfile[type-gentium] \usetypescript[gentium][agr] \setupbodyfont[gentium] \enableregime[...] \starttext ... greek text ... \stoptext Mojca

2 2

Problem with fonts
by Mohamed Bana 09 Dec '08

09 Dec '08

i just updated the minimals and I can no longer typeset, even though $ mtxrun --script fonts --list shows the font ! LuaTeX error ...mals/tex/texmf-context/tex/context/base/luat-log.lua:75: bad argument #2 to 'format' (string expected, got table) stack traceback: [C]: in function 'format' ...mals/tex/texmf-context/tex/context/base/luat-log.lua:75: in function 'report' ...mals/tex/texmf-context/tex/context/base/font-otf.lua:1431: in function 'after' ...mals/tex/texmf-context/tex/context/base/font-otf.lua:895: in function 'load' ...mals/tex/texmf-context/tex/context/base/font-otf.lua:1845: in function 'otf_to_tfm' ...mals/tex/texmf-context/tex/context/base/font-otf.lua:2066: in function 'read_from_open_type' ...mals/tex/texmf-context/tex/context/base/font-def.lua:333: in function <...mals/tex/texmf-context/tex/context/base/font-def.lua:315> (tail call): ? ...mals/tex/texmf-context/tex/context/base/font-def.lua:250: in function 'read' ...mals/tex/texmf-context/tex/context/base/font-def.lua:645: in function 'read' ...mals/tex/texmf-context/tex/context/base/font-def.lua:752: in function 'command_2' <main ctx instance>:1: in main chunk. \lowleveldefinefont ...s ", "\@@fontfallbacks " )} \edef \somefontspec {at \s... \xxdododefinefont ...efont {#4}\newfontidentifier \let \localrelativefontsiz... \fontstrategy ...me \fontclass #2#3#4#5\endcsname \tryingfontfalse \fi <inserted text> ...yle \fontalternative \fontsize \fi \iftryingfont \fontstr... \synchronizefont ...strategy \the \fontstrategies \relax \fi \iftryingfont \... <argument> \getvalue {\@style@ \fontstyle } \edef \fontstyle {\fontstyle }\if... ... l.148 \setupbodyfont[mainface,13pt] %should be 12pt, use 12.5pt for minion a... ? %%% test.tex %%% % engine=luatex \enableregime [utf-8] \def\sc{\setfontfeature{smallcaps}} \definefontfeature [default][default] [protrusion=quality,expansion=quality,mode=node,script=latn] \definefontfeature [oldstyle][default] [protrusion=quality,expansion=quality,mode=node,script=latn,onum=yes] \definefontfeature [smallcaps][default] [protrusion=quality,expansion=quality,mode=node,script=latn,smcp=yes] \usetypescript [serif] [hanging] [pure] \setupalign [hanging] \setfontfeature{oldstyle} \usetypescriptfile[type-folio] \definetypeface[mainface][rm][serif][warnockpro] [default] [features=default] \definetypeface[mainface][ss][sans][myriadpro] [default] [features=default] \definetypeface [mainface] [mm] [math] [palatino] [default] [encoding=texnansi] \setupbodyfont[mainface,13pt] \starttext {\tfa HELLO} {\tfb WORLD} \stoptext %%% type-folio.tex %%% \starttypescript [serif] [minionpro] \definefontsynonym [MinionPro-Regular] [name:minionproregular] \definefontsynonym [MinionPro-Bold] [name:minionprobold] \definefontsynonym [MinionPro-Italic] [name:minionproit] \definefontsynonym [MinionPro-BoldItalic] [name:minionproboldit] \stoptypescript \starttypescript [serif] [minionpro] \definefontsynonym [Serif] [MinionPro-Regular] [features=default] \definefontsynonym [SerifBold] [MinionPro-Bold] [features=default] \definefontsynonym [SerifItalic] [MinionPro-Italic] [features=default] \definefontsynonym [SerifBoldItalic] [MinionPro-BoldItalic] [features=default] % \definefontsynonym [SerifSlanted] [SerifItalic] [features=default] \definefontsynonym [SerifCaps] [Serif] [features=smallcaps] \stoptypescript \starttypescript [sans] [myriadpro] \setups[font:fallback:sans] % \definefontsynonym [MyriadPro-Regular] [name:MyriadPro-Regular] [features=default] % \definefontsynonym [MyriadPro-Bold] [name:MyriadPro-Bold] [features=default] % \definefontsynonym [MyriadPro-Italic] [name:MyriadPro-It] [features=default] % \definefontsynonym [MyriadPro-BoldItalic] [name:MyriadPro-BoldIt] [features=default] \definefontsynonym [MyriadPro-Regular] [name:myriadproregular] \definefontsynonym [MyriadPro-Bold] [name:myriadprobold] \definefontsynonym [MyriadPro-Italic] [name:myriadproit] \definefontsynonym [MyriadPro-BoldItalic] [name:myriadproboldit] \stoptypescript \starttypescript [sans] [myriadpro] \definefontsynonym [Sans] [MyriadPro-Regular] [features=historic] \definefontsynonym [SansBold] [MyriadPro-Bold] [features=historic] \definefontsynonym [SansItalic] [MyriadPro-Italic] [features=historic] \definefontsynonym [SansBoldItalic] [MyriadPro-BoldItalic] [features=historic] \definefontsynonym [SansCaps] [Sans] [features=latin-smallcaps] \stoptypescript \starttypescript [serif] [warnockpro] \setups[font:fallback:serif] \definefontsynonym [WarnockPro-Regular] [name:warnockproregular] \definefontsynonym [WarnockPro-Bold] [name:warnockprobold] \definefontsynonym [WarnockPro-Italic] [name:warnockproit] \definefontsynonym [WarnockPro-BoldItalic] [name:warnockproboldit] \stoptypescript \starttypescript [serif] [warnockpro] \definefontsynonym [Serif] [WarnockPro-Regular] [features=default] \definefontsynonym [SerifBold] [WarnockPro-Bold] [features=default] \definefontsynonym [SerifItalic] [WarnockPro-Italic] [features=default] \definefontsynonym [SerifBoldItalic] [WarnockPro-BoldItalic] [features=default] \definefontsynonym [SerifCaps] [Serif] [features=smallcaps] \stoptypescript Log; (report.tex ConTeXt ver: 2008.11.10 21:40 MKIV fmt: 2008.12.9 int: english/english system : cont-new loaded (/home/mbana/context-minimals/tex/texmf-context/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex (/home/mbana/context-minimals/tex/texmf-context/tex/context/base/cont-new.mkiv) (/home/mbana/context-minimals/tex/texmf-context/tex/context/base/cont-mtx.tex)) system : cont-fil loaded (/home/mbana/context-minimals/tex/texmf-context/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (/home/mbana/context-minimals/tex/texmf-context/tex/context/user/cont-sys.tex (/home/mbana/context-minimals/tex/texmf-context/tex/context/base/type-tmf.tex) (/home/mbana/context-minimals/tex/texmf-context/tex/context/base/type-siz.tex) (/home/mbana/context-minimals/tex/texmf-context/tex/context/base/type-otf.tex)) bodyfont : 12pt rm is loaded specials : pdftex loaded language : language en is active system : report.top loaded (report.top) color : mpcmyk color space is supported color : mpspot color space is supported color : system rgb is global activated interaction : active (report.tuo) (report.tuo) system : module bib loaded (/home/mbana/context-minimals/tex/texmf-local/tex/context/bib/t-bib.tex publications : loading formatting style from bibl-apa (/home/mbana/context-minimals/tex/texmf-local/tex/context/bib/bibl-apa.tex)) publications : wrote a new auxiliary file report.aux publications : loading formatting style from bibl-ssa (bibl-ssa.tex) (/home/mbana/context-minimals/tex/texmf-context/tex/context/base/page-run.tex loading : Context Page Macros / Runtime Macros ) check : missing or ungrouped '=' after 'frame' in line 115 (@@ef) check : missing or ungrouped '=' after 'frame' in line 115 (@@ex) (type-folio.tex) load otf | loading: /media/sdb1/Fonts/Minion Pro/MinionPro-Regular.otf load otf | warning: The following table(s) in the font have been ignored by FontForge load otf | warning: Ignoring 'DSIG' digital signature table load otf | warning: Warning: Mac and Windows entries in the 'name' table differ for the Fullname string in the language English (US) Mac String: Minion Pro Windows String: MinionPro-Regular load otf | warning: The glyph named mu is mapped to U+00B5. But its name indicates it should be mapped to U+03BC. load otf | warning: The glyph named Delta is mapped to U+2206. But its name indicates it should be mapped to U+0394. load otf | warning: The glyph named Omega is mapped to U+2126. But its name indicates it should be mapped to U+03A9. load otf | enhance: patch load otf | enhance: before load otf | enhance: enrich load otf | enhance: registering tlig feature load otf | enhance: registering trep feature load otf | enhance: flatten load otf | flattening 'specifications' tables load otf | flattening 'anchor' tables load otf | flattening 'gpos' tables load otf | flattening 'gsub' tables load otf | enhance: analyze load otf | enhance: after load otf | replacing 'kerns' tables by 'mykerns' tables ! LuaTeX error ...mals/tex/texmf-context/tex/context/base/luat-log.lua:75: bad argument #2 to 'format' (string expected, got table) stack traceback: [C]: in function 'format' ...mals/tex/texmf-context/tex/context/base/luat-log.lua:75: in function 'report' ...mals/tex/texmf-context/tex/context/base/font-otf.lua:1431: in function 'after' ...mals/tex/texmf-context/tex/context/base/font-otf.lua:895: in function 'load' ...mals/tex/texmf-context/tex/context/base/font-otf.lua:1845: in function 'otf_to_tfm' ...mals/tex/texmf-context/tex/context/base/font-otf.lua:2066: in function 'read_from_open_type' ...mals/tex/texmf-context/tex/context/base/font-def.lua:333: in function <...mals/tex/texmf-context/tex/context/base/font-def.lua:315> (tail call): ? ...mals/tex/texmf-context/tex/context/base/font-def.lua:250: in function 'read' ...mals/tex/texmf-context/tex/context/base/font-def.lua:645: in function 'read' ...mals/tex

2 3