- ntg-context - NTG Mailing Lists

ConTeXt+ispell--> output with uncorrect words in overline red.
by Xan 19 Feb '09

19 Feb '09

Hi, I'm amazing if it's possible to process, by some way, a text written in context for context overline in red the incorrect words (via ispell). Overline in red is any example. For example, we could \frame this words. How it could be done?, if it's. Xan. PS: Please, CCme.

3 3

Inverted exclamation / question marks
by Pau 19 Feb '09

19 Feb '09

Hello, I am trying to write a text in Castillian and I don't get the inverted exclamation symbol right. I am using \language[es] \mainlanguage[es] in the preamble and I also tried playing with utf without success. Instead of ¡ and ¿ I get an "a" with a cedilla and a pound symbol, respectively Of course, I can use {!`} and {?`}, but I was wondering why I don't get these right using \language I have done my homework and have googled, yahoo'ed and even clustied hint? thanks, Pau

7 10

indenting
by Xan 19 Feb '09

19 Feb '09

I have the following enumeration: \defineenumeration [definition] [text=Definició,headstyle=bold,style=italic, between=\blank,titledistance=.5em, textdistance=1em,stopper=.,location=hanging,titleleft=(,titleright=)] and when I use it (\startdefinition ... \stopdefinition) it appears not indenting. I want to indenting it, but \indenting before \startdefinition does not work. How can do that? Thanks in advance, Xan.

2 1

useURL interactionmode
by Severin 19 Feb '09

19 Feb '09

Hello, I defined urls like \useURL [activepython] [{http://.test.com}][sub]. Doing \from[url] with interactive mode enabled I get 'http://test.com' written in the document and the hyperlink point to http://test.com/sub. Now, if I disable interactive mode I still get 'http://test.com' on the output, but It would be nice to have 'http://test.com/sub', since there are no hyperlinks. is there a way to do this? My idea would be to write a macro that encabsulates \useURL, but is different, depending on the interaction-mode. Regards, Severin

1 0

Re: [NTG-context] new beta
by polytope 19 Feb '09

19 Feb '09

Dear Hans and Taco, I was so glad to see both of you in Seoul, far from your place. I noticed that some problems in Korean typesetting were cleared in your demo. Thank you for the new beta. I didn't test yet, however, I believe that it is perfect since Dr. Kim said so. And, his comments will give you more clues to make better output. Thank you again for your concern. with best regards, Dalyoung Jeong

2 1

BibTeX problems (urgent): warning: cite argument bridson unknown on 139
by Xan 18 Feb '09

18 Feb '09

Hi, I have a context mem2.tex document with: % Modules \usemodule[bib] \usemodule[bibltx] % Bibliography options \setupbibtex[database=mem2] \setuppublications [numbering=yes, sort=author, criterium=all] \setuppublications [alternative=ams] \setupheadtext[ca][pubs=Referències] \setuppublicationlist[authoretallimit=3] \setuppublicationlist[authoretaltext={\it\ et al.}] \setuppublicationlist[authoretaldisplay=1] and mem2.bib with: @Book{craft, author = "Wayne C. Booth and Gregory G. Colomb and Joseph M. Williams", title = "The Craft of Research", publisher = "The University of Chicago Press", year = 2008, address = "Chicago", edition = "Third" } @unpublished{nagorko, author = "Nagórko, Andrzej", title = "{ I}ntroduction to Geometric Group Theory. {A}n introductory talk about basic notions of Geometric Group Theory, with emphasis on asymptotic invariants of groups", year = 2007, note = "\from[nagorko-pdf] (accedida el febrer de 2009). Pareix que forma part del seminari Probability and Ergodic Theory" } @Book{llibre-estil, editor = "{Govern de les Illes Balears}", title = "Llibre d'estil", publisher = "amadip.esment", year = 2006, pages = 614, note = "\from[govern-me] (accedida el febrer de 2009)" } @article{bridson, author = "Martin R. Bridson", title = "On the geometry of normal forms in discrete groups", journal = "Proceedings of the London Mathematical Society", year = "1993", volume = "67", pages = "595-616" } @manual{context-eni, title = "Con\TeX t, the manual", author = "Hans Hagen", year = "2001", month = "nov", organization = "Pragma-{ADE}", address = "Ridderstraat 27, 8061GH Hasselt. Països Baixos", note = "\from[context-manual-pdf], \from[contextgarden]" } @article{scm, title = "Com cal escriure en matemàtiques", author = "Paul R. Halmos", journal = "Butlletí de la Societat Catalana de Matemàtiques", volume = "21", number = "1", year = "2006", pages = "53-79" } @book{epstein, author = "Epstein, David B. A. and J. W. Cannon and D. F. Holt and S. V. F. Levy and M. S. Paterson and W. P. Thurston", title = "Word processing in groups", publishers="Jones and Barlett Publishers", year= "1992" } @unpublished{article, author = "Xavier Bordoy", title = "{ U}na generalització de l'amplada d'una secció", year = 2009, note = "Com a part de l'assignatura Tècniques de recerca i comunicació científica" } When I run texec, it gives more lot of errors: warning: cite argument [reference] unknown on 139 I don't know why I do wrong. (I use \cite[nagorko] for example) Thanks, Xan.

2 3

Problem getting output
by Charles Doherty 18 Feb '09

18 Feb '09

Dear all, When I try to typeset a file using XeConTeXt METAFONT is called and goes into a loop trying to make the fonts you see below. I have made a clean TeX installation from the MacTeX site but the result is the same. As an alternative I installed Minimals and created an MinXeConTeXt.engine in TeXShop. Using this I get a pdf with all my fonts without a problem. I uninstalled TeX completely but with the re- installation of MacTeX 2008 I get the result below. I would be most grateful for advice on what to do to put things right. Thanks in advance, Charlie Doherty TeXExec | processing document 'N0v2007.tex' TeXExec | no ctx file found TeXExec | tex processing method: context TeXExec | TeX run 1 TeXExec | writing option file N0v2007.top TeXExec | using randomseed 468 TeXExec | tex engine: xetex TeXExec | tex format: cont-en This is XeTeXk, Version 3.1415926-2.2-0.999.6 (Web2C 7.5.7) %&-line parsing enabled. entering extended mode (./N0v2007.tex ConTeXt ver: 2008.05.21 15:21 MKII fmt: 2009.2.17 int: english/ english language : language en is active system : cont-new loaded (/usr/local/texlive/2008/texmf-dist/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex (/usr/local/texlive/2008/texmf-dist/tex/context/base/cont-new.mkii) (/usr/local/texlive/2008/texmf-dist/tex/context/base/cont-mtx.tex)) system : cont-old loaded (/usr/local/texlive/2008/texmf-dist/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/usr/local/texlive/2008/texmf-dist/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (/usr/local/texlive/2008/texmf-config/tex/context/user/cont-sys.tex (/usr/local/texlive/2008/texmf-dist/tex/context/base/type-tmf.tex) (/usr/local/texlive/2008/texmf-dist/tex/context/base/type-siz.tex) (/usr/local/texlive/2008/texmf-dist/tex/context/base/type-otf.tex) (/usr/local/texlive/2008/texmf-dist/tex/context/base/type-xtx.tex)) bodyfont : 12pt rm is loaded language : patterns en->ec:ec->1->2:3 uk->ec:ec->2->2:3 de- >ec:ec->3->2: 3 fr->ec:ec->4->2:3 es->ec:ec->5->2:3 pt->ec:ec->6->2:3 it->ec:ec->7- >2:3 nl->e c:ec->8->2:3 cz->ec:ec->9->2:3 sk->ec:ec->10->2:3 pl->ec:ec->11->2:3 loaded specials : tex,postscript,rokicki loaded system : N0v2007.top loaded (./N0v2007.top specials : loading definition file dpx (/usr/local/texlive/2008/texmf-dist/tex/context/base/spec-dpx.tex specials : loading definition file fdf (/usr/local/texlive/2008/texmf-dist/tex/context/base/spec-fdf.tex (/usr/local/texlive/2008/texmf-dist/tex/context/base/spec-fdf.mkii)) specials : fdf loaded ) specials : fdf,dpx loaded specials : loading definition file xet (/usr/local/texlive/2008/texmf-dist/tex/context/base/spec-xet.tex) specials : fdf,dpx loaded ) (/usr/local/texlive/2008/texmf-dist/tex/context/base/type-tmf.tex) (/usr/local/texlive/2008/texmf-dist/tex/context/base/type-siz.tex) (/usr/local/texlive/2008/texmf-dist/tex/context/base/type-otf.tex) (/usr/local/texlive/2008/texmf-dist/tex/context/base/type-xtx.tex) . . .To keep the file short I have deleted all the lines in between . . (/usr/local/texlive/2008/texmf-dist/tex/context/base/type-otf.tex) (/usr/local/texlive/2008/texmf-dist/tex/context/base/type-xtx.tex) kpathsea: Running mktextfm lmtypewriter10-regular mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input lmtypewriter10-regular This is METAFONT, Version 2.718281 (Web2C 7.5.7) kpathsea: Running mktexmf lmtypewriter10-regular ! I can't find file `lmtypewriter10-regular'. <*> ...; nonstopmode; input lmtypewriter10-regular

4 3

[***SPAM***] blocks in LuaTex
by batela 18 Feb '09

18 Feb '09

Dear Sirs, Im the past I make some exams using the file in the attach. Now, I need to prepare another exam but this old file don't work with the new Context version. I had defined a block designed question bat \startquestion isn't recognised. Why? Thanks for your support. Have a nice day. Jorge Manuel

2 8

Letter module - appendices
by Wolfgang Schuster 17 Feb '09

17 Feb '09

Hi, I know at least a few people use my letter module and I want to ask them if they have a problem when I change the handling of appendices like CC and postscript. The current way to write them is \startletter [copy=..., postscript=...] ... \stopletter and I want to change this in \startletter ... \CC{...} % or \copy{...} \PS{...} % or \postscript{...} \stopletter As positive side effect of the new method would be to write \startletter \opening{...} ... \closing{...} \stopletter as a alternative way to write the opening and closing text (the old keyval works too) but the appendices can be only handled in one way. Wolfgang

3 4

Re: [NTG-context] Update catalan + spanish translation
by Wolfgang Schuster 17 Feb '09

17 Feb '09

Am 17.02.2009 um 17:11 schrieb Xan: >>> Now, I have <texmf>/tex/context/base/land-ita.tex updated, but the >>> caption in \placetable still is "Tables" instead of "Table". How >>> can I do that context uses the updated file >> >> 1. Have you regenerated to format. > How to "regenerated?" > I run "update-texmf". Is it this? No, you need 'texexec --make en'. Wolfgang

2 1