- ntg-context - NTG Mailing Lists

Re: [NTG-context] \setupcaption stopper does not work in mkiv
by jm 16 Jun '09

16 Jun '09

hans, thank you so much! was finally able to solve my problem using your solution. :-) just one thing though, how do i produce "Figure 1.1" or "Figure 1-1"? Thanks so much for bearing with me. I still have a lot to learn a lot about ConTeXt. :-) Cheers! :-) joel mendoza

2 1

--synctex switch available
by Mojca Miklavec 15 Jun '09

15 Jun '09

Just a short notice ... The ConTeXt from version 2009-06-13 on (mkii only) provides the --synctex switch (that is equivalent to "--synctex=1" call to engine). Mojca

1 0

structure bugs: \nomarking
by Idris Samawi Hamid ادريس سماوي ح امد 15 Jun '09

15 Jun '09

Hi, As we discussed, I'm submitting structure bugs as we move along to get this manuscript to the publisher. \nomarking fails: ! Undefined control sequence. \@@mklimittext ->\@@kolimittext \doifelse #1#2->\edef \!!stringa {#1 }\edef \!!stringb {#2}\ifx \!!stringa \!... \splitsequence #1#2->\doifelse {#1}\v!no {#2}{\doifelse {#1}\v!yes {\languag... l.1 ...\nomarking {it extends way past the margin} \sectionheadmarkingtitle ...arks.title("#1","#2")} \fetchmark ...sname \??mk \??mk #3\endcsname {#1}} \fi \fi ... l.5 ? test file attached Best wishes Idris -- Professor Idris Samawi Hamid, Editor-in-Chief International Journal of Shi`i Studies Department of Philosophy Colorado State University Fort Collins, CO 80523

1 0

Re: [NTG-context] Using a tikz package
by Mojca Miklavec 15 Jun '09

15 Jun '09

On Mon, Jun 15, 2009 at 20:58, Massimo Redaelli wrote: Dear Massimo, Thanks a lot for such a quick response. > thanks for letting me know about this. I am certainly willing to > fix it, but my knowledge of Context is null. My knowlegde of LaTeX equals that as well, so ... :) :) :) I'm putting this back to the mailing list since I should be studying instead of playing with TeX now ... > Could you suggest to me a good starting point to find out differences > and incompatibilities of Latex and Context? ConTeXt knows and respects 99% of plain TeX commands. So only LaTeX-specific ones will need to be fixed. I suggest to take a look at pgfplots or TikZ package itself to see how the differences are implemented. If you are ready to adapth the package to ConTeX, plain TeX support could be done at the same time for no extra cost, I guess. I suspect that almost all of your code works out of the box already anyway. These are the most obvious exceptions, but I didn't inspect closely enough, so there might be others: \NeedsTeXFormat -> no equivalent in ConTeXt (and is not needed) \RequirePackage{name} -> \usemodule[name] \RequirePackage{xstring} -> no idea what it does; it might be that the functionality of this package will have to be adapted/implemented in ConTeXt or something else will have to be done \DeclareOption -> it might be that this needs to be implemented in semi-low-level ConTeXt (you'll get help on this mailing list); maybe that's the most work, but once you have a single example you just copy-paste \ExecuteOptions \ProcessOptions \newcommand -> in ConTeXt one would use the "plain-TeX" \def\commandname#1#2... \newenvironment{circuitikz}{ \begin{tikzpicture}}{\end{tikzpicture}} -> \long\def\startcircuitikz#1\stoptikzcircuitikz{\starttikzpicture#1\stoptikzpicture} You can take a look at pgfplots for example. They put all the code to tex/generic/pgfplots and only a single file to tex/latex/pgfplots. The beginning of circuitikz.sty should go to tex/latex/circuitikz/circuitikz.sty, while the "contents" of that file and probably all other files should better have the ending "tex" and go to tex/generic/circuitikz/...(I don't know exact conventions of tikz).code.tex and you should create a file in tex/context/third/circuitikz/t-circuitikz.tex that starts approximately like this: % some nice header, but you may worry about that later \def\pgfcircversion{0.2.1} \writestatus{loading}{2009/04/17 The CircuiTikz circuit drawing package version \pgfcircversion} \startmodule[circuitikz] \unprotect % this sets the catcodes of @ and ! to letter (if needed) \usemodule[tikz] \usetikzlibrary[calc] \usepgflibrary[decorations.pathmorphing] % maybe some ConTeXt-specific initialisations % load all the generic file(s) that you need \input nameofyourfile.code.tex % define the environment \long\def\startcircuitikz#1\stopcircuitikz{\starttikzpicture#1\stoptikzpicture} \stopmodule \protect \doifnotmode{demo}{\endinput} % you may put some simple sample document below In order to test the package: % \usemodule[tikz] % maybe you don't need this if you load circuitikz already \usemodule[circuitikz][american] \starttext \startcircuitikz .... \stopcircuitikz \stoptext But I'm sure that the list will help you further with implementation details ... Mojca > On Mon, 2009-06-15 at 20:48 +0200, Mojca Miklavec wrote: >> On Mon, Jun 15, 2009 at 20:35, Maurício wrote: >> > I would like to use this package for >> > drawing circuits: >> > >> > http://home.dei.polimi.it/mredaelli/circuitikz/index.html >> > >> > The examples are in Latex, but I imagine it >> > could be used in ConTeXt since it's written >> > using Tikz. >> > >> > How can I do that? The recomended instalation >> > procedure at the website is to just uncompress >> > everything in texmf-local directory, but that >> > creates a 'latex' directory that I imagine >> > ConTeXt won't use. >> >> Hello Maurício, >> >> You'll need to convince the author to make a generic package. >> >> I'm not sure if he's familiar with ConTeXt or not. The changes that >> are needed might be doable in reasonable amount of time (from my first >> impression there are not too many LaTeX-specific commands present), >> but the package won't work out of the box as it stands at the moment. >> >> Mojca > >

1 0

Using a tikz package
by Maurício 15 Jun '09

15 Jun '09

I would like to use this package for drawing circuits: http://home.dei.polimi.it/mredaelli/circuitikz/index.html The examples are in Latex, but I imagine it could be used in ConTeXt since it's written using Tikz. How can I do that? The recomended instalation procedure at the website is to just uncompress everything in texmf-local directory, but that creates a 'latex' directory that I imagine ConTeXt won't use. Thanks, Maurício

3 2

Symbol join of \ll and equal
by Xan 15 Jun '09

15 Jun '09

Hi, I just want to know if there is a symbol that join \ll and = like \leq joins < and =. If not, it's possible to "make" that symbol (that has << in upper and - in bottom; like \leq but with two <<)? Thanks in advance, Xan. PS: In The not so short introduction to latex there is no such symbol. Maybe in ConTeXt....

2 3

Part, chapter, section numbers typeset twice by e.g. \in{Chapter}[ch:foo]
by Kevin D. Robbins 15 Jun '09

15 Jun '09

Hi Hans, In the following test, \in{}[] typesets the correct part/chapter/section number, but doubled up as in "Chapter 2.32.3" instead of "Chapter 2.3". \starttext \placecontent \part[pt:foo_bar_baz]{Foo, Bar, Baz} \chapter[ch:foo]{Foo} \in{Chapter}[ch:baz1] \chapter[ch:bar]{Bar} \in{Section}[ch:foo] \chapter[ch:baz]{Baz} \in{Part}[pt:foo_bar_baz1] \part[pt:foo_bar_baz1]{Foo, Bar, Baz 1} \chapter[ch:foo1]{Foo 1} \chapter[ch:bar1]{Bar 1} \chapter[ch:baz1]{Baz 1} \stoptext I don't urgently need a fix or anything. I just wanted to get this on the queue. Kevin

1 0

Argument of \doswitchtotypeface has an extra }
by Peter Münster 15 Jun '09

15 Jun '09

Hello, Here I get the error: \starttext bla\footnote{\useURL[bla][http://bla/]\from[bla]} \stoptext I use \useURL inside the footnote, because in my real code, I put \useURL and \from together in a macro. Cheers, Peter -- Contact information: http://pmrb.free.fr/contact/

3 8

problem with \footnote and \FlushStep (MKIV)
by Peter Münster 15 Jun '09

15 Jun '09

Hello, Some weeks ago, this worked fine, but today: \usemodule[pre-stepwise] \setupinteraction[state=start] \starttext \chapter{Footnote appears too early} \StartSteps bla\FlushStep \footnote{footnote}\FlushStep bla\FlushStep \StopSteps \chapter{Footnote appears too late} \StartSteps \startitemize \item bla\FlushStep \footnote{footnote}\FlushStep \item bla\FlushStep \stopitemize \StopSteps \page Here it's ok: \StartSteps bla\FlushStep \footnote{footnote}\FlushStep bla\FlushStep \StopSteps \stoptext TIA for any help! Peter -- Contact information: http://pmrb.free.fr/contact/

2 1

new structure code
by Wolfgang Schuster 15 Jun '09

15 Jun '09

Hi, i found a few bugs in the new structure code for mkiv. 1. the dot after numbered items is missing \starttext \startitemize[n] \item first item \item second item \stopitemize \stoptext 2. indices in headers work not in interactive mode \setupinteraction[state=start] \starttext \section{Section one\index{section}} \stoptext 3. \\ generates a backslash but was a space before \starttext text\\text \stoptext to be continued ... Wolfgang

10 44