- ntg-context - Mailing Lists

Problem with Schusters letter package
by Rolf Lindgren 20 Sep '10

20 Sep '10

I think I've managed to set ConTeXt to mkiv, things proceed relatively smoothly, and from the log file, it appears that the right files are read. I'm using the most recent version of Schusters's letter package. When compiling the example letter, the following error occurs: ! Undefined control sequence. <argument> \@@@@lsoptionmethod the macro in question seems to appear in default.nli but is not defined anywhere. Any and all help appreciated. Thank you, -- Rolf Marvin Bøe Lindgren http://www.grendel.no/ http://www.elvetun.no/ +47 40061755

3 2

Metapost and underscore
by Aditya Mahajan 20 Sep '10

20 Sep '10

Hi, Really bad things happen if the variable name in metapost contains an underscore. It took me quite a while to isolate this problem. Minimal example: \startMPinclusions input rboxes ; \stopMPinclusions \starttext \startMPpage rboxit.A (textext("A")) ; rboxit.B_1 (textext("B")) ; rboxit.C (textext("C")) ; A.c = origin ; xpart B_1.c = xpart C.c = xpart A.c + 3cm ; ypart B_1.s - ypart C.n = 1cm ; drawboxed(A,B_1,C) ; \stopMPpage \startMPpage rboxit.A (textext("A")) ; rboxit.B (textext("B")) ; rboxit.C (textext("C")) ; A.c = origin ; xpart B.c = xpart C.c = xpart A.c + 3cm ; ypart B.s - ypart C.n = 1cm ; drawboxed(A,B,C) ; \stopMPpage \stoptext See attached output. The label of box B is placed at origin rather than at the correct location! I am using 2010.08.17 and luatex 0.61 (too close to a deadline to update). Aditya

2 3

modify resume
by pol stra 20 Sep '10

20 Sep '10

Hi all, I like the result of the t-resume module, but i think it waste space so it is possible to modify layout ? I can’t make a two lines title (if too long overwrite adress field). I don’t want page numbering. The fact is i don’t know how module works and how to «fork» it for my own use. Thanks

3 2

luatex-plain can not work with the beta (2010.09.18 12:08, linux x86)
by Li Yanrui (李延瑞) 20 Sep '10

20 Sep '10

Hi Hans, It can load cid fonts rightly now. But I found it can not generate MetaPost figure. For example, %filename: test.tex \setmplibformat{plain} \mplibcode beginfig(1); draw fullcircle scaled 10cm withcolor red withpen pencircle; endfig; \endmplibcode \end luatex output the log: This is LuaTeX, Version beta-0.63.0-2010091123 (format=luatex-plain 2010.9.20) 20 SEP 2010 08:20 \write18 enabled. **test (./test.tex (/opt/context/tex/texmf-context/tex/generic/context/luatex-basics.tex \lastallocatedattribute=\count26 ) (/opt/context/tex/texmf-context/tex/generic/context/luatex-fonts.tex </opt/context/tex/texmf-context/tex/generic/context/luatex-fonts-merged.lua>(using cache: /opt/context/tex/texmf-cache/luatex-cache/generic) ! ! Attribute 0 is reserved for ConTeXt's font feature management and has to be ! set to zero. Also, some attributes in the range 1-255 are used for special ! purposed so setting them at the TeX end might break the font handler. ! I am using the merged version of 'luatex-fonts.lua' here. If you run into problems or experience unexpected behaviour, and if you have ConTeXt installed you can try to delete the file 'luatex-font-merged.lua' as I might then use the possibly updated libr aries. The merged version is not supported as it is a frozen instance. <luatex-fonts.lua loaded in 0.037 seconds>) (/opt/context/tex/texmf-context/tex/generic/context/luatex-mplib.tex \mplibscratchbox=\box16 )<mplib: using format plain.mem><mplib: mp error: This is MetaPost, Version 1.502 (plain.mp >> $Id ! Isolated expression. <to be read again> : l.1 $Id: plain.mp,v 1.3 2005/04/28 06:45:21 taco Exp $ ! Extra tokens will be fl ushed. <to be read again> : l.1 $Id: plain.mp,v 1.3 2005/04/28 06:45:21 taco Exp $ >> base_name >> "plain" ! Equation cannot be performed (numeric=string). <to be read again> ; l.8 ...base_name, base_vers ion; base_name="plain"; base_version="1.004"; >> base_version >> "1.004" ! Equation cannot be performed (numeric=string). <to be read again> ; l.8 ...n; base_name="plain"; base_version ="1.004"; >> "Preloading the plain mem file, version " >> base_version ! Not implemented: (string)&(unknown numeric). <to be read again> ; l.10 ...he plain mem file, version "&base_ver sion; >> base_version ! Not a string. <to be read again> ; l.10 ...he plain mem file, version "&base_version; ) ! Attempt to close th e bottom level file!. l.576 defaultpen := savepen; no-error> ) No pages of output. PDF statistics: 0 PDF objects out of 1000 (max. 8388607) 0 named destinations out of 1000 (max. 131072) 1 words of extra memory for PDF output out of 10000 (max. 10000000) -- Best regards, Li Yanrui (李延瑞)

1 0

\setupcombinedlist ignores `level' argument?
by Corsair 19 Sep '10

19 Sep '10

Hi all, If I understand this right, \setupcombinedlist[content][level=section] tells ConTeXt to list up to section level when doing \completecontent. But it seems no matter what I set for `level', \completecontent lists however deeply it can. Here is a minimal example: \setupcombinedlist[content][level=section] \starttext \completecontent \chapter{Level 0} \section{Level 1} \subsection{Level 2} \subsubsection{Level 3} \subsubsubsection{Level 4} \subsubsubsubsection{Level 5} \stoptext Is this a bug, or I did something wrong? -- There is no emotion; there is peace. There is no ignorance; there is knowledge. There is no passion; there is serenity. There is no death; there is the Force.

2 2

Chapter-author in TOC
by Andreas Harder 19 Sep '10

19 Sep '10

Hi all! I’m using the structureuservariable to set an author on a per chapter basis. But I would also like to have them in the table of contents, so I tried the following: \setuplist[chapter][alternative=MyListItem] \definelistplacement[MyListItem][none]#1#2#3% {#1 #2 (\structureuservariable{author}) #3} \starttext \placelist[chapter] \startchapter[title=Quote from Tufte][author=Tufte] \input tufte \stopchapter \startchapter[title=Quote from Knuth][author=Knuth] \input Knuth \stopchapter \stoptext … without success. I appreciate any help. Greeting Andreas

3 2

installing minimals
by Charles Doherty 18 Sep '10

18 Sep '10

Dear all, I had installed minimals in a folder 'context' in my home directory. I am using a Macbook 10.6.4. I have been using MarkIV successfully for a number of months. I recently decided to update but I get the result below. I followed the instructions on Contextgarden as before in the ConTeXt Minimals page. I finally trashed the folder and did everything from scratch. I use TeXshop as my editor. I would be very grateful if anyone could give me the steps to get ConTeXt Minimals working again on my Mac. Thanks, Charlie TeXExec | processing document 'Purser.tex' TeXExec | no ctx file found TeXExec | tex processing method: context TeXExec | TeX run 1 TeXExec | writing option file Purser.top TeXExec | using randomseed 519 TeXExec | tex engine: luatex TeXExec | tex format: cont-en MTXrun | using format name: /Users/charlesdoherty/context/tex/texmf-cache/luatex-cache/context/e580c8be7dcf42f3c6968188a08f16d6/formats/cont-en.fmt MTXrun | no luc/lua with name: cont-en TeXUtil | parsing file Purser.tui TeXUtil | shortcuts : 0 TeXUtil | expansions: 0 TeXUtil | reductions: 0 TeXUtil | divisions : 0 TeXUtil | loaded files: 0 TeXUtil | temporary files: 0 TeXUtil | commands: 0 TeXUtil | programs: 0 TeXUtil | tuo file saved TeXExec | runtime: 0.132344

3 4

Strange optical scaling
by Florian Wobbe 18 Sep '10

18 Sep '10

Dear all, I was about to adapt the type-optical module to include Semibold and Condensed when I noticed that optical scaling is not working as expected. To be more precise only downscaling works. Let me give you a short example of what I did: \usemodule[type-optical] \usetypescript[minion] \setupbodyfont[minion,12pt] \starttext \title{Title} \section{Section} Text \tfxx tfxx \tfx tfx \tfa tfa \tfb tfb \tfc tfc \tfd tfd \stoptext This document is composed of various font sizes: \tfxx to \tfd scale to 7.2, 9.6, 14.4, 17.28, 20.736, and 24.888pt. According to the definitions in type-optical \tfxx should be set in MinionPro-Capt, \tfx and \tf in MinionPro-Regular, \tfa and \tfb in Subhead and the rest is Display size. Looking at the resulting PDF file with pdffonts indicates that MinionPro-Regular and MinionPro-Capt are the only fonts used. Not so Subhead or Display sizes. Changing the bodyfont to [minion,14pt] results in MinionPro-Subh and MinionPro-Regular to be included. I was curious and tried the same thing with Latin Modern: \setupbodyfont[8pt] \starttext \title{Title} \section{Section} Text \tfa tfa \tfb tfa \tfc tfa \tfd tfa \stoptext Same problem: Only LMRoman8-Regular is used. By including the lines \tfxx tfxx \tfx tfx LMRoman5-Regular and LMRoman6-Regular are included in the PDF. Again not the larger sizes. I'm quite puzzled about this strange behaviour and would apreciate any help. Best Florian PS.: I'm running Tex Live 2010 (MacTex) with a recent update from rsync://contextgarden.net/minimals/current/.

1 0

\centercolon and friends with PX-fonts
by Andreas Harder 18 Sep '10

18 Sep '10

Hi all, because \left(…\right) and \sqrt{…} is broken with OpenType math fonts I had to switch to the PX-fonts but there the colon is eaten if one uses the \centercolon commands. \setupbodyfont[palatino] % \setupbodyfont[euler] % OK % \setupbodyfont[cambria] % OK % \setupbodyfont[asana] % OK \starttext \startlines \formula {A \centercolon B} \formula {A \colonminus B} \formula {A \minuscolon B} \formula {A \colonequals B} \formula {A \equalscolon B} \formula {A \colonapprox B} \formula {A \approxcolon B} \formula {A \colonsim B} \formula {A \simcolon B} \formula {A \coloncolon B} \formula {A \coloncolonminus B} \formula {A \minuscoloncolon B} \formula {A \coloncolonequals B} \formula {A \equalscoloncolon B} \formula {A \coloncolonapprox B} \formula {A \approxcoloncolon B} \formula {A \colonsim B} \formula {A \simcoloncolon B} \stoplines \stoptext Greeting Andreas

1 0

[xits] \sqrt not work properly
by Hongwen Qiu 17 Sep '10

17 Sep '10

The \sqrt is not work properly in Mkiv. The following is the minimal example, and the result is attached \setupbodyfont[xits] \starttext \startformula \sqrt{abcde} \stopformula \stoptext

2 1