- ntg-context - Mailing Lists

Dummy buff-ver.mkiv question
by Renaud AUBIN 13 Nov '10

13 Nov '10

Hi folks, From http://wiki.contextgarden.net/Verbatim_text#Defining_your_own_set_of_colors and considering the following code snippet from buff-ver.mkiv \definepalet [colorpretty] [ prettyone=colorprettyone, prettytwo=colorprettytwo, prettythree=colorprettythree, prettyfour=colorprettyfour] I conclude that we are limited to a four colors palet for our custom pretty printer… Right or wrong? Ok, from that basis, one solution could be to directly define custom colors within pret-xxx.lua… but how? Any ideas? Renaud

2 3

Footnote links in the body?
by Marco Pessotto 13 Nov '10

13 Nov '10

Hello there. I notice a strange behaviour with the footnote linking. Let's use the following minimal example: \setupinteraction[state=start] \starttext test\footnote{test} \stoptext Compiled with mkiv, the latest beta (ConTeXt ver: 2010.11.12 18:22 MKIV fmt: 2010.11.13), luatex, version beta-0.64.0-2010111215 (Gnu/Linux intel 32bit) The ¹ in the body is green, but it's not clickable, while the backlink is red, is clickable but it reset the zoom at "fit page", which is kind of annoying when reading (if you have to jump between the footnotes and the body). This happens with evince and acroreader. Using mkii the link in the body is green, but doesn't react on click. Am I missing something? Probably it's a known issue, but I couldn't find any post or wiki article (I'll write it if I can understand what's going on). I also find this in the logs: systems : begin file fn.tex at line 3 references : invalid page reference: 0 (which I suppose is the footnote link). Last question en passant: is this list the right place to post bug reports? -- Marco

2 1

simplefonts
by Herbert Voss 13 Nov '10

13 Nov '10

I want to use \bf and \it with sinplefonts. Is this the only way to get a bold style? Without it I didn't get a bold style. \usemodule[simplefonts] \setmainfont[NexusSerif-Regular] \definesimplefont[bf][NexusSerif-Bold][size=12pt] \starttext \bf \input knuth \stoptext the names are: rawname="NexusSerif-Bold", rawname="NexusSerif-Regular", [ ... ] Herbert

4 5

\showcharacters
by Herbert Voss 13 Nov '10

13 Nov '10

\starttext \showcharacters \stoptext with latest minimal and mkii I get only a one line output: ec ec-lmr12: composed bottom char raw with mkiv the \showcharacters macro is missing. There is no file enco-run.mkiv Herbert

1 0

\startlinetable
by Herbert Voss 13 Nov '10

13 Nov '10

An example drom the wiki: \setuplinetable[n=6,lines=40] \setuplinetable[c][1] [width=2cm,background=color,backgroundcolor=red] \setuplinetable[c][4] [width=3cm,background=color,backgroundcolor=yellow] \setuplinetable[c][6] [width=3cm,background=color,backgroundcolor=magenta] \setuplinetable[r][odd] [background=color,backgroundcolor=gray] \setuplinetable[r][even][background=color,backgroundcolor=green] \starttext \showframe \showstruts \setupcolors[state=start] \startlinetable \dorecurse{5}{\NC aaa\crlf aaa \NC bb \NC c \NC ddddd \NC eeee \NC ff} \NC \NR \dorecurse{100}{\dorecurse{5}{\NC aaa \NC bb \NC c \NC ddddd \NC eeee \NC ff} \NC \NR} \stoplinetable \stoptext ! Missing number, treated as zero. <to be read again> d \!!depth ->d epth \domakeblackrule ...!!height \@@bjheight \!!depth \@@bjdepth \stopcolor \complexblackrule ...[\??bj ][#1]\domakeblackrule \egroup <argument> ...depth }, \c!width =\wd \scratchbox ] \hskip -\wd \scratchbox \b... \firstoftwoarguments #1#2->#1 ... l.16 ...aa \NC bb \NC c \NC ddddd \NC eeee \NC ff} \NC \NR ? current minimal mkii and mkiv Herbert

1 0

table background color in first row
by Manfred Lotz 13 Nov '10

13 Nov '10

Hi there, I have s simple table like this: \starttext \starttable[|l|l|] \NC \bf Colheader 1 \NC \bf Colheader 2 \NC \SR \HL \NC cell 11 \NC cell 12 \NC \FR \NC cell 11 \NC cell 12 \NC \LR \stoptable \stoptext and like to have a light gray background for the heading row. I found documentation about \setupTABLE which on the one hand I did not fully understand how to use and on the other hand I'm not quite sure how far this is the way it is done nowadays. -- Thanks, Manfred

5 19

Re: [NTG-context] typescripts
by Herbert Voss 12 Nov '10

12 Nov '10

Am 12.11.2010 19:07, schrieb Hans Hagen: > On 12-11-2010 7:00, Herbert Voss wrote: >> that one is no problem, it is the sans serif font. I have problems >> with the Libertine Regular, eg. >> -rw-r--r-- 1 voss users 434528 15. Jun 23:42 LinLibertine_Re-4.7.5.otf > > this one gets included too: > > <c:/data/develop/tex-context/tex/texmf-fonts/fonts/data/libertine/LinLibertine_Re-4.7.5.otf> > > > what does your log say? the problem was the lower case letter of serif in \setups[font:fallback:serif] This was the reason why the serif font (libertine) wasn't used. With \setups[font:fallback:Serif] it is ok. \starttypescriptcollection[mylibertine] \starttypescript[serif][libertine] \definefontsynonym[Serif] [name:linlibertineo] [features=default] \definefontsynonym[SerifItalic] [name:Linux Libertine O Italic] [features=default] \definefontsynonym[SerifBold] [name:Linux Libertine O Bold] [features=default] \definefontsynonym[SerifBoldItalic] [name:Linux Libertine O Bold Italic] [features=default] \definefontsynonym[SerifSlanted] [name:Linux Libertine Slanted O] [features=default] \definefontsynonym[SerifSlantedBold][name:Linux Libertine Slanted O Bold][features=default] \definefontsynonym[SerifCaps] [name:Linux Libertine O Capitals] [features=smallcaps] \stoptypescript \starttypescript[sans][biolinum][name] \setups[font:fallback:Serif] ... Herbert

1 0

minimal
by Herbert Voss 12 Nov '10

12 Nov '10

I just downloaded a minimal with ./first-setup.sh and get symbols : loading symbolset nav (/usr/local/texlive/2010/texmf-dist/tex/context/base/symb-nav.tex) ! Undefined control sequence. \@@iafieldlayer ->\currentviewerlayer \doif #1#2->\edef \!!stringa {#1 }\edef \!!stringb {#2}\ifx \!!stringa \!!str... <inserted text> ...}\doif \@@iafieldlayer \v!auto {\def \@@iafieldlayer {\cu... \dodosetupinteraction ...e \everysetupinteraction l.25 \setupinteraction[\c!symbolset=navigation 1] ? Herbert

1 1

typescripts
by Herbert Voss 12 Nov '10

12 Nov '10

I am still playing with typescripts... In this example I get sans serif and mono but for the roman libertine I get the lm mono. What is wrong? Herbert name type emb sub uni object ID ------------------------------------ ----------------- --- --- --- --------- QNOYJG+LMMonoProp10-Regular Type 1 yes yes no 18 0 IGFPZR+LinBiolinumO CID Type 0C yes yes yes 19 0 JNFQZG+BeraSansMono-Roman CID Type 0C yes yes yes 20 0 \setuppagenumbering[location={}] \starttypescriptcollection[mylibertine] \starttypescript[serif][libertine][name] \definefontsynonym [Serif] [name:linlibertineo] [features=default] \definefontsynonym [SerifItalic] [name:linlibertineoi] [features=default] \definefontsynonym [SerifBold] [name:linlibertineob] [features=default] \definefontsynonym [SerifBoldItalic] [name:linlibertineobi][features=default] \definefontsynonym [SerifSlanted] [name:linlibertineoi] [features=default] \definefontsynonym [SerifSlantedBold][name:linlibertineobi][features=default] % \definefontsynonym [SerifCaps] [name:linlibertineoc] [features=SmallCaps] \stoptypescript \starttypescript[sans][biolinum][name] \definefontsynonym [Sans] [name:linbiolinumo] [features=default] \definefontsynonym [SansItalic] [name:linbiolinumoi] [features=default] \definefontsynonym [SansBold] [name:linbiolinumob] [features=default] \definefontsynonym [SansSlanted] [name:linbiolinumosl] [features=default] \stoptypescript \starttypescript[mono][bera][name] \definefontsynonym [Mono] [file:fvmr8a.afm] \stoptypescript \starttypescript[mylibertine] \definetypeface[mylibertine][rm][serif][libertine][default] \definetypeface[mylibertine][ss][sans] [biolinum] [default] \definetypeface[mylibertine][tt][mono] [bera] [default][rscale=0.85] \definetypeface[mylibertine][mm][math] [modern] [default] \stoptypescript \stoptypescriptcollection \starttext \setupbodyfont[mylibertine,12pt,rm] foo bar baz \ss foo bar baz \tt foo bar baz %\showbodyfont \stoptext

2 5

Separate layout and content XML files?
by Peter Davis 12 Nov '10

12 Nov '10

I want to process documents from two separate XML files. One XML file defines the layout of the page ... placement of text boxes, fonts to use ... even placeholder text. The other XML contains the actual content that gets placed into that layout. Is this possible? Anyone have any examples of something like this? I'm a LaTeX user who's new to ConTeXt. I figured I can learn more quickly by starting with a "recipe" and modifying it to fit my needs. Thank you! -pd

4 6