- ntg-context - NTG Mailing Lists

FiXme-module
by Andreas Harder 08 Nov '10

08 Nov '10

Hi Wolfgang, I've played a bit with your FiXme-module. First of all, thanks for the work! But I ran into following issues. 1. Something is going wrong if I allow interaction. So the text is marked as a link, but one can't jump to the right location. 2. Instead of margin notes I would like to use PDF annotations, so I tried: \setupfixme [before={\startcomment[FiXme]}, after=\stopcomment] This gives an error. 3. Is it possible to save the FiXme-list in a external text file? Something like \savebuffer[expanded list of fixmes][list.txt] \usemodule[fixme] % \setupfixme % -> error % [before={\startcomment[FiXme]}, % after=\stopcomment] \setupinteraction[state=start] \setuplist[fixme][interaction=all] \starttext \fixme{To be done …} \input knuth \fixme{To be done …} \input tufte \fixme{To be done …} \page \placelist[fixme] \stoptext Best regards Andreas

3 2

MkIV doesn't find font
by Oliver Heins 08 Nov '10

08 Nov '10

I try to use Minion Pro as main font: \usetypescriptfile[type-adobe] \usetypescript[minion] \setupbodyfont[minion] To my irritation, ConTeXt/LuaTeX complains about not finding the font. […] (/usr/local/texlive/2010/texmf-dist/tex/context/third/typescripts/type-adobe.mkiv) define fonts > font with name minionpro-regular is not found define fonts > unknown font minionpro-regular, loading aborted define fonts > unable to define minionpro-regular as \*minion12ptrmtf* […] However, Minion Pro is installed on the system, running $ mtxrun --script fonts --list --all --pattern=minionpro* shows lots of entries. However, there is no such font as minionpro-regular, but minionproregular (without the hyphen): Running "$ mtxrun --script fonts --list --all --pattern=minionproregular" yields "minionproregular minionprocapt /usr/local/share/fonts/MinionPro_Capt.otf", while "$ mtxrun --script fonts --list --all --pattern=minionpro-regular" returns an empty result. What am I doing wrong? TIA, olli -- Oliver Heins heins(a)sopos.org http://www.sopos.org/olli GPG: F27A BA8C 1CFB B905 65A8 2544 0F07 B675 9A00 D827 1024D/9A00D827 2004-09-24 -- gpg --recv-keys 0x9A00D827 Please avoid sending me Word or PowerPoint attachments: http://www.gnu.org/philosophy/no-word-attachments.html

2 2

\usepseudocaps
by Herbert Voss 08 Nov '10

08 Nov '10

Also from the documentation: systems : begin file latex5 at line 2 error: ...text/tex/texmf-context/tex/context/base/typo-cap.lua:100: attempt to call global 'copy_node' (a nil value) . system > error on line 6 in file latex5.tex: ? ... 1 2 \starttext 3 4 \userealcaps \Caps{Herbert Voß} 5 \usepseudocaps \Caps{Herbert Voß} 6 >> 7 \stoptext l.6 context minimal Herbert

2 1

Ligatures on Linux Libertine Bold Italic
by Marco 08 Nov '10

08 Nov '10

Hello there. I'm pretty new to ConTeXt and I'm really impressed by your work. So a huge thanks is due. Anyway. Today I found that Linux Libertine Bold Italic doesn't create the ligatures. These work on XeTeX. I took a look at /tex/texmf-context/tex/context/base/type-otf.mkiv where the libertine typescript is defined, but I couldn't find anything wrong. The fonts are the one shipped with the latest updated TeXlive 2010 (they are correctly loaded). With other fonts the ligatures for Bold Italic are created, so I'm a bit lost. Is my setup broken somehow? Or the fonts are broken? Or is it a bug? Thanks in advance. %%%% start minimal example %%%%% \usetypescript[termes,libertine] \setupbodyfont[termes,12pt] \def\testtext{ The fi ffl ffi fluf \par {\it The fi ffl ffi fluf fi} \par {\bf The fi ffl ffi fluf} \par {\bi The fi ffl ffi fluf}\par} \starttext Termes: \testtext \switchtobodyfont[libertine,12pt] Libertine: \testtext \stoptext %%%%% end minimal example %%%%%% ConTeXt ver: 2010.11.03 19:42 MKIV fmt: 2010.11.8 LuaTeX, Version beta-0.63.0-2010091123 (From the latest minimal distribution) pdffonts output name type emb sub uni object ID ------------------------------------ ----------------- --- --- --- --------- PHAMRR+TeXGyreTermes-Regular CID Type 0C yes yes yes 18 0 OOTVTU+TeXGyreTermes-Italic CID Type 0C yes yes yes 19 0 QEYIRB+TeXGyreTermes-Bold CID Type 0C yes yes yes 20 0 ONUACL+TeXGyreTermes-BoldItalic CID Type 0C yes yes yes 21 0 YFUCDN+LinLibertineO CID Type 0C yes yes yes 22 0 PYLANJ+LinLibertineOI CID Type 0C yes yes yes 23 0 LBBYDA+LinLibertineOB CID Type 0C yes yes yes 24 0 FBIQKN+LinLibertineOBI CID Type 0C yes yes yes 25 0 -- Marco

3 3

[OT] xkcd & Knuth
by Mojca Miklavec 08 Nov '10

08 Nov '10

http://www.xkcd.com/816/

3 2

\Cap
by Herbert Voss 07 Nov '10

07 Nov '10

The documentation says, that \cap converts the first letter of the word into a capital letter ... But it didn't \starttext \Cap{foo} \stoptext TeXLive and TLContrib Herbert

1 1

TEI XML
by Daniel Grycman 07 Nov '10

07 Nov '10

Hi list, used the example on the wiki (http://wiki.contextgarden.net/TEI_xml) but I didn't get any correct output. I used Mark IV. I want to use TEI for an project and use ConTeXt for the specific output. Is it a good choice? Daniel

5 9

context export
by Manfred Lotz 07 Nov '10

07 Nov '10

Hi Hans, On Sun, 07 Nov 2010 16:23:37 +0100 Hans Hagen <pragma(a)wxs.nl> wrote: > Hi Manfred, > > some reading ... it should not be to hard to map the xml onto > html ... relevant details are in attributes > Hmm, but I would need to have a dtd or schema file in order write a transformation (xslt or so) to html. The other possibility would be to make the html creation an iterative process along the creation of the context document. I'd would prefer the first possibility, though. Instead of using xslt I also could code the transformation in Lua. What xml lib do you recommend to use in Lua? Currently, I have no time to code the xml --> htmp conversion. However, considering above ideas I could start with markdown as discussed in the other thread which has limitations but gives me a context source for free as a starting point. -- Thanks, Manfred

2 1

\startmode and \startcomment inside of \def
by Vedran Miletić 07 Nov '10

07 Nov '10

Hi, I would like to define something like this: \def\startSolution{\startmode[solutions]...} \def\stopSolution{...\stopmode} But when I use \startSolution and \stopSolution, and mode solutions isn't enabled, I get something like Runaway argument? aaa \stopSolution \stoptext ! File ended while scanning use of \dostopmode. system > error on line 0 in file : File ended while scanning use of \dostopmode ... What's the proper way of doing this? -- Vedran Miletić

3 4

ConTexT conversion to html/rtf/odt
by Manfred Lotz 07 Nov '10

07 Nov '10

Hi there, I'm in a situation where I have to do some documentation which should be available in html and rtf/odt (would be nice to have). I do not need any fancy stuff, just simple things: ordered, unordered lists, verbatim, tables etc. As a ConTeXt newbie I thought this might be a good idea to get into ConTeXt. However, I'm not quite sure how to create HTML from ConTeXt. What I tried so far: Created a simple document: \starttext \section{Some section} \startitemize[1] \item bla bla \stopitemize \stoptext Tried htcontext test.tex and got: ! Undefined control sequence. <argument> <dl class="dd-\itemlevel "> \HCode ...ode \leavevmode \fi \ht:special {t4ht=#1 }\fi \a:itemize-group ... {<dl class="dd-\itemlevel ">} \global \let \end:dd =\empty \dostartitemgroup ... {\dodostartitemgroup [#2][]} \fi <to be read again> \item l.6 \item bla bla ? Perhaps there is some stupidity from my side. If yes I appreciate any corrections. If no then htcontext from package tex4ht doesn't really work for ConTeXt and then I would like to know what other alternatives I have. Also regarding rtf or/and odt. -- Thanks, Manfred -- Manfred

6 8