- ntg-context - Mailing Lists

Graphics in text-line
by Robert Blackstone 27 Nov '11

27 Nov '11

Dear list, Would it be possible to insert a tiny graphic, not larger than a capital M, into a textline? I am presently making a bilingual version of a sixteenth century French musical treatise, and I would like to copy as much as possible the typographic features of the original in the modern version, both French and a translation. In the original French edition some text lines contain musical symbols, not only the sharp, flat and natural characters but also some others, of which I can make graphics (png or pdf). I can place these praphics in the margin and even in a footnote (although with rather too much space above it) but I would prefer to have them in their text line. Is that doable? Thanks in advance. Best regards, Robert Blackstone

3 3

strange behavior with apa and apa-fr bibliographic styles
by Alexandre Krispin 27 Nov '11

27 Nov '11

Hello, I have noticed that, for a reason I don't understand, dots after dates in the bibliography are not placed in the same manner. For example, I get (copy-paste from pdf) : Morales, I. (1997) . The mexican crisis and the weakness of the NAFTA consensus. Annals of the American Academy of Political and Social Science, 550 :130-152. Morales, I.(1999). NAFTA : The governance of economic openness. Annals of the American Academy of Political and Social Science, 565 :35-65. Robey, J. S. (1999) . Civil society and NAFTA : Initial results. Annals of the American Academy of Political and Social Science, 565 :113-125. Totman, C. (1980) . From Sakoku to Kaikoku. The Transformation of Forei- gn-Policy Attitudes, 1853-1868. Monumenta Nipponica, 35(1) :1-19. So for the first entry, the point after (1997) is placed after a space, whereas it is not the case for the second entry (there is also no space between I. and (1999)). In some cases (when I add more entries), I even have the point before the parenthesis, though the bib file might be right (or in any cases, since the field are completed in the same manner, I didn't expected different behaviors in the result since it is automatized and all fields are articles). Here is the bib file : %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @article{conrad1980transformation, author = "Conrad Totman", title = "From {S}akoku to {K}aikoku. {T}he {T}ransformation of {F}oreign-{P}olicy {A}ttitudes, 1853-1868", journal = "Monumenta Nipponica", year = 1980, volume = 35, number = 1, pages = "1-19", publisher = "Sophia University", url = "http://www.jstor.org/stable/2384397", } @article{robey1999civil, author = "John S. Robey", title = "Civil Society and {NAFTA}: Initial Results", journal = "Annals of the American Academy of Political and Social Science", publisher = "Sage Publications, Inc.", year = 1999, month = "September", volume = 565, pages = "113-125", url = "http://www.jstor.org/stable/1049540" } @article{morales1999governance, author = "Isidro Morales", title = "{NAFTA}: The Governance of Economic Openness", journal = "Annals of the American Academy of Political and Social Science", publisher = "Sage Publications, Inc.", year = 1999, month = "September", volume = 565, pages = "35-65", url = "http://www.jstor.org/stable/1049536" } @article{morales1999mexican, author = "Isidro Morales", title = "The Mexican Crisis and the Weakness of the {NAFTA} Consensus", journal = "Annals of the American Academy of Political and Social Science", publisher = "Sage Publications, Inc.", year = 1997, month = "March", volume = 550, pages = "130-152", url = "http://www.jstor.org/stable/1047712" } %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% And here is what I have for bibliography setup : %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \setupbibtex[database=biblio,sort=author] \setuppublications[alternative=apa-fr,sorttype=bbl,refcommand=authoryear] %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Thanks for your help ! Cheers, Alexandre Krispin -- ------------------------------------------------------------------------------ Alexandre KRISPIN 41 rue Guynemer | 93200 Saint-Denis | France tél : 06 28 76 69 34 | http://bijutsu.toile-libre.org ----------------------------------------------------------------------------

1 0

error with \showlayout and export
by Henning Hraban Ramm 27 Nov '11

27 Nov '11

Hi wizards, if I use \showlayout in a project where I setup export=yes, ConTeXt stops with a fatal error. Minimal failing example: \setupbackend[export=yes] \starttext \showlayout \stoptext Ixchel:konzept hraban$ context --purge context_test.tex mtx-context | run 1: luatex --fmt="/Users/hraban/Library/texmf/tex/ texmf-cache/luatex-cache/context/2448223e6631addb83df348d74153606/ formats/cont-en" --lua="/Users/hraban/Library/texmf/tex/texmf-cache/ luatex-cache/context/2448223e6631addb83df348d74153606/formats/cont- en.lui" --backend="pdf" "./context_test.tex" \stoptext This is LuaTeX, Version beta-0.70.1-2011051908 (rev 4277) \write18 enabled. (context_test.tex ConTeXt ver: 2011.11.24 15:52 MKIV fmt: 2011.11.25 int: english/ english system > cont-new.mkiv loaded (/Users/hraban/Library/texmf/tex/texmf-context/tex/context/base/cont- new.mkiv system > beware: some patches loaded from cont-new.mkiv ) system > context_test.top loaded (context_test.top) fonts > latin modern fonts are not preloaded languages > language en is active backend > export > enabling export to xml {/Users/hraban/Library/texmf/tex/texmf-context/fonts/map/pdftex/ context/mkiv-base.map} fonts > preloading latin modern fonts (second stage) (/Users/hraban/Library/texmf/tex/texmf-context/tex/context/base/type- siz.mkiv) (/Users/hraban/Library/texmf/tex/texmf-context/tex/context/ base/type-otf.mkiv) files > readfile > asked name: 'loc', not found {/Users/hraban/Library/texmf/tex/texmf-fonts/fonts/map/dvips/lm/lm- math.map}{/Users/hraban/Library/texmf/tex/texmf-fonts/fonts/map/dvips/ lm/lm-rm.map} fonts > virtual math > unable to resolve name mapsfromchar fonts > fallback modern rm 12pt is loaded (/Users/hraban/Library/texmf/tex/texmf-context/tex/context/base/page- run.mkiv loading > ConTeXt Page Macros / Runtime Macros ) interface > initialization > loading interface definitions from 'mult-def.lua' interface > initialization > loading interface messages from 'mult-mes.lua' metapost > initializing instance 'metafun' using format 'metafun' metapost > loading 'metafun': /Users/hraban/Library/texmf/tex/ texmf-context/metapost/context/base/metafun.mpiv backend > xmp > using file '/Users/hraban/Library/texmf/tex/ texmf-context/tex/context/base/lpdf-pdx.xml' pages > flushing realpage 1, userpage 1, subpage 1 pages > flushing realpage 2, userpage 2 pages > flushing realpage 3, userpage 3 pages > flushing realpage 4, userpage 4 pages > flushing realpage 5, userpage 5 )</Users/hraban/Library/texmf/tex/texmf/fonts/opentype/public/lm/ lmmono10-regular.otf></Users/hraban/Library/texmf/tex/texmf/fonts/ opentype/public/lm/lmmono12-regular.otf></Users/hraban/Library/texmf/ tex/texmf/fonts/opentype/public/lm/lmroman12-regular.otf> ! LuaTeX error ...exmf/tex/texmf-context/tex/context/base/back-exp.lua: 1203: attempt to index global 'c' (a nil value). system > tex > error on line 0 in file : LuaTeX error ... <empty file> <*> ./context_test.tex \stoptext ? Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer)

2 1

Re: [NTG-context] \unit and Hertz, lux, and degrees/minutes/seconds
by Robin Kirkham 27 Nov '11

27 Nov '11

On 18/11/2011, at 10:00 PM, Pontus Lurcock <pont(a)talvi.net> wrote: > On Fri 18 Nov 2011, Hans Hagen wrote: >> so, best is that those asking for it come up with a list of issues: >> which symbols need this option, is it language related or whatever, >> so that i can do them all at once. We can already have different >> mapping sets so spacing could be part of that. > > I don't personally have a need for units in the foreseeable future (I > was just nitpicking with Robin about spacing) so feel free to ignore > any of my suggestions, but I think the summary so far would be: > > 1. Spacing for almost all SI units should be the same and doesn't > need special cases. > > 2. Geographical degrees/minutes/seconds should have no spaces. > > 3. Spacing for degrees temperature varies according to different style > guides -- both before and after the ° -- so ideally it would be > possible to set these independently of the rest of the units. > > For my own part I would add: > > 4. SI unit abbreviations are mostly capital letters, and look (to me) > strange with old-style figures. I have seen books which used > old-style figures for page numbers, years, etc. but switched to > lining figures when a unit was involved; this is also what I did > in my thesis. So I think it would be useful to allow an automatic > switch to lining figures to be configured when typesetting a unit. > > Pont I agree on points 1 and 2 (although it seems arcminute and arcsecond are not implemented anyway). Point 3, yes, but I'm dubious about space after ° for the temperature units °C or °F as it breaks the rule about unit ambiguity ("° C" is a degree-Coulomb -- although I can't image a physical situation that would need such a unit). Point 4 is a bit beyond the scope of the SI units scheme but sounds like a potential need. Over the weekend I've discovered a couple more problems with \unit so I'll make up some test cases and desired output and post it in a few days. Robin

7 11

Re: [NTG-context] Footnote Problem
by Kip Warner 26 Nov '11

26 Nov '11

On Wed, 2011-11-16 at 00:09 +0100, Wolfgang Schuster wrote: > Am 15.11.2011 um 20:41 schrieb Kip Warner: > > > On Tue, 2011-11-15 at 09:42 +0100, Wolfgang Schuster wrote: > >> Am 15.11.2011 um 06:57 schrieb Kip Warner: > >> > >>> Hey folks, > >>> > >>> The second \footnote doesn't show in the generated PDF. The number is > >>> listed where it should at the end of the sentence, but the text of the > >>> footnote is not listed at the bottom of the page. > >> > >> Add \automigrateinserts to your document. > >> > >> Wolfgang > >> > > > > Thanks Wolfgang, but should that be in the environment file or can it go > > anywhere? > > Put it in the preamble of your document which can be a environment file or just before \starttext. > > Wolfgang Hey Wolfgang. The problem now is that the footnote sits inside of textbackground boxes at the bottom of them. I'd like them instead at the bottom of the page with the rest of my footnotes. How is this done? -- Kip Warner -- Software Engineer OpenPGP encrypted/signed mail preferred http://www.thevertigo.com

1 0

captions trouble
by Meer, H. van der 26 Nov '11

26 Nov '11

Something seems amiss in the code below. The idea is having in general figures with numbered labels, but now and then a figure without. First I thought to use [location=none] on the placement, but then the numbering is not interrupted: label-1 (label-2 invisible), label-3. That is disturbing to the reader who will think a figure is missing. The numbering and the label are suppressed by \setupcations[number=no] and reinstated with \setupcaptions[number=yes]. But this kills the space between the label and the caption. I enclose a minimal example that shows the effect. Could this be a bug? \setuppapersize[A6][A6] \starttext \placefigure[][fig:1]{label with space}{\externalfigure[arrows.pdf]} \setupcaptions[number=no] \placefigure{}{\externalfigure[arrows.pdf]} \setupcaptions[number=yes] \placefigure[][fig:3]{label without space}{\externalfigure[arrows.pdf]} \stoptext Hans van der Meer

3 4

Feature request: criterium=component
by Idris Samawi Hamid ادريس سماوي حامد 25 Nov '11

25 Nov '11

Dear inner circle, I have two components, each a book in its own right, and each with multiple \part's, \chapter's, \section's etc. Through products and components I have all crossreferences between the two books set up, thanks to the mechanisms put in place this fall by Hans. I compile both components through the product file. Problem: I cannot separate the list of Tables in component~1 from those in component~2. So a list of Tables in component~1 contains the tables in component~ and vice versa. For TOC I was able to get around this by defining, for component~2, mirror section heads with different names but identical functionality to those in component~1. But for tables I have not been able to get this work-around to work: http://archive.contextgarden.net/message/20111124.203204.79333c77.en.html So, in any case, it sames that adding a criterium=component option would be the most user-friendly way to handle this kind of case. Is it feasible? Thnx in advance and Best wishes Idris -- Professor Idris Samawi Hamid, Editor-in-Chief International Journal of Shīʿī Studies Department of Philosophy Colorado State University Fort Collins, CO 80523

2 2

Change the gap between image and caption
by Jaroslav Hajtmar 25 Nov '11

25 Nov '11

Hello ConTeXt folks. Is it possible to adjust the size of the gap between the lower edge of the picture and its caption in simple externalfigure command? By experimenting I found that this gap can be set in a floating environment (placefigure) using "inbetween" parameter. Is there possibilities do gap somehow larger or smaller in externalfigure environment? See minimal example. Thanx Jaroslav \starttext \setupcaptions[number=no,style=\ssxx,inbetween={\blank[1cm]}] \setupfloats[spacebefore=none, spaceafter=none] % \input tufte \placefigure[here]{Here is farther caption} {\externalfigure[mill][type=jpg,metod=jpg,width=5cm,frame=on]} \input tufte \page \startTEXpage \startcombination[3*1] {\externalfigure[cow][frame=on]}{This caption has to be more distanced.} {\externalfigure[cow][frame=on]}{This title has yet to be more distanced.} {\externalfigure[cow][frame=on]}{This label is to be closer to figure.} \stopcombination \stopTEXpage \stoptext

2 4

\start- \stopalign (in formulas) is broken
by Andreas Harder 25 Nov '11

25 Nov '11

Hi, with the latest beta the following do not work anymore (example from math-ali.mkiv). \starttext \placeformula \startformula \startalign \NC a \EQ b \NR[+] \NC c \EQ d \NR \NC \EQ f \NR[for:demo-a-1] \NC \EQ g \NR[for:demo-a-2][a] \NC \EQ h \NR[for:demo-a-3][b] \NC \EQ i \NR \stopalign \stopformula \stoptext error: Missing number, treated as zero … Regards Andreas

2 1

float names and lists
by Idris Samawi Hamid ادريس سماوي حامد 25 Nov '11

25 Nov '11

Dear gang, Consider the following: ================= \definefloat[tablecw] % \setupfloat[tablecw] \setupcaption[tablecw][prefix=Table] \starttext \setupfloats[location=middle] \placetable [here] [tablecw:test]{A Caption.} {\starttable[|c|c|c|] \HL \VL Test \VL Test \VL Test \VL\FR \HL \stoptable} \setupfloats[location=middle] \placetablecw [here] [tablecw:test]{A Caption.} {\starttable[|c|c|c|] \HL \VL Test \VL Test \VL Test \VL\FR \HL \stoptable} \placelistoftables % \placelistoftablescws \stoptext ================= Two challenges: 1. How do I change the prefix that heads the caption of a table? For example, \definefloat[tablecw] produces Tablecw 1 I want to keep the command name of the float but change the prefix. I tried things like \setupcaption[tablecw][prefix=My Table] \setupcaption[tablecw][name=My Table] but no success. 2. \placelistoftablescws produces an undefined control sequence: What am I missing here? Best wishes Idris -- Professor Idris Samawi Hamid, Editor-in-Chief International Journal of Shīʿī Studies Department of Philosophy Colorado State University Fort Collins, CO 80523

4 7