- ntg-context - Mailing Lists

module installer: unknown script 'install-modules.lua' or 'mtx-install-modules.lua'
by denis.maier＠unibe.ch 25 May '23

25 May '23

Hi, I'm setting up a new computer, and I've wanted to benefit from the new module installer. However, the commands I should use gives me the following error message : mtxrun --script install-modules --list mtxrun | unknown script 'install-modules.lua' or 'mtx-install-modules.lua' I'm using a fresh context installation (2023.05.08 17:39) on Windows. I've see a couple of others had/have( ?) the same issue. It does not matter from where I run the command (i.e., I'm getting the same error message also from inside context\tex) Is there anything I should do to make this work? Best, Denis

4 6

text under page floats
by Henning Hraban Ramm 24 May '23

24 May '23

Hi, in more than one of my books, I struggle with some lines of text below page floats. They start below the regular text area (i.e. in the bottom) and can even consist of a table float or a section title. I can’t reproduce it in a simple example like this: """ \starttext \dorecurse{2}{\samplefile{tufte}} \startplacefigure[location=page,title={Pagefloat}] \framed[width=\textwidth,height=.5\textheight]{TEST} \stopplacefigure \dorecurse{5}{\samplefile{knuth}} \stoptext """ What could cause this behavior? For what should I look in my setups? Hraban

1 2

Context Live
by Jeroen 24 May '23

24 May '23

I would like to setup a website with a live Context renderer like live.contextgarden.net Is there a procedure how to setup such a live setup? Thanks, Jeroen

2 1

How to really force figure to appear "here"?
by Joel 24 May '23

24 May '23

I have been using \placefigure[here, force] to place some graphics, but its instead showing other text from the next section, then the picture. In testing, this is causing readers to be confused, as they expect to see a picture, but its somehow appearing two pages later. I don't care it it requires a huge blank area on the page before it, how can I make it so any text after \placefigure[here, force] doesn't appear before the figure? --Joel

4 4

Noto Emoji COLRv1
by Max Chernoff 24 May '23

24 May '23

Hi Hans, I tried using the code from [1] for Noto Emoji in COLRv1 format [2]: \startTEXpage \definefontfeature[colored][default][colr=9] \definedfont[Noto-COLRv1.ttf*colored] 🦆 % U+1F986 \stopTEXpage but ConTeXt gives the following error: fonts > otf loading > loading 'Noto-COLRv1.ttf', hash 'noto-colrv1' otf reader > table version 1 of 'colr' is partially supported for font Noto-COLRv1.ttf otf reader > unsupported colr type 2 paint format 0 otf reader > unsupported colr type 2 paint format %i otf reader > fatal error in file 'Noto-COLRv1.ttf': ...ext/tex/texmf-context/tex/context/base/mkxl/font-dsp.lmt:3575: table index is nil stack traceback: ...ext/tex/texmf-context/tex/context/base/mkiv/font-otr.lua:2344: in metamethod 'newindex' ...ext/tex/texmf-context/tex/context/base/mkxl/font-dsp.lmt:3575: in metamethod 'index' ...ext/tex/texmf-context/tex/context/base/mkxl/font-dsp.lmt:3677: in metamethod 'index' ...ext/tex/texmf-context/tex/context/base/mkxl/font-dsp.lmt:3150: in upvalue 'getpaintoffset' ...ext/tex/texmf-context/tex/context/base/mkxl/font-dsp.lmt:3564: in field '?' ...ext/tex/texmf-context/tex/context/base/mkxl/font-dsp.lmt:3677: in metamethod 'index' ...ext/tex/texmf-context/tex/context/base/mkxl/font-dsp.lmt:3685: in local 'reader' ...ext/tex/texmf-context/tex/context/base/mkiv/font-otr.lua:2089: in upvalue 'readtable' ...ext/tex/texmf-context/tex/context/base/mkiv/font-otr.lua:2204: in upvalue 'readdata' ...ext/tex/texmf-context/tex/context/base/mkiv/font-otr.lua:2257: in function <...ext/tex/texmf-context/tex/context/base/mkiv/font-otr.lua:2240> [C]: in function 'xpcall' ...ext/tex/texmf-context/tex/context/base/mkiv/font-otr.lua:2346: in upvalue 'loadfont' ...ext/tex/texmf-context/tex/context/base/mkiv/font-otr.lua:2401: in field 'loadfont' ...ext/tex/texmf-context/tex/context/base/mkxl/font-otl.lmt:160: in field 'load' ...ext/tex/texmf-context/tex/context/base/mkxl/font-otl.lmt:624: in upvalue 'otftotfm' ...ext/tex/texmf-context/tex/context/base/mkxl/font-otl.lmt:652: in function <...ext/tex/texmf-context/tex/context/base/mkxl/font-otl.lmt:651> (...tail calls...) ...ext/tex/texmf-context/tex/context/base/mkxl/font-def.lmt:362: in function <...ext/tex/texmf-context/tex/context/base/mkxl/font-def.lmt:350> (...tail calls...) ...ext/tex/texmf-context/tex/context/base/mkxl/font-def.lmt:465: in field 'read' ...ext/tex/texmf-context/tex/context/base/mkxl/font-ctx.lmt:1371: in function <...ext/tex/texmf-context/tex/context/base/mkxl/font-ctx.lmt:1228> (...tail calls...) fonts > otf loading > loading failed due to read error fonts > defining > forced type 'ttf' of 'Noto-COLRv1' not found fonts > defining > unable to define 'Noto-COLRv1.ttf' as 'thedefinedfont--0' system > print height forced to paper height system > print width forced to paper width fonts > checking > char 🦆 (U+1F986) in font 'LMRoman10-Regular' with id 1: missing >From what I can tell, the Lua code is trying to read past the end of font file. I tried debugging the error further, but this is well beyond my understanding. (Also, paintreaders[6--11] in font-dsp.lmt are missing "offset" in the function signature, and paintreaders itself is glboal. Maybe related?) I'm using the current latest (2023.05.08 17:39). Thanks, -- Max [1]: https://mailman.ntg.nl/pipermail/ntg-context/2022/107279.html [2]: https://github.com/googlefonts/noto-emoji/raw/main/fonts/Noto-COLRv1.ttf

2 1

position in xmlfilter
by Hans van der Meer 22 May '23

22 May '23

I do not understand the behaviour of certain function is xml processing. My problem is finding the position of the current node, for example with <A><B><A> I would like to see the first <A> resulting in 1 and the second in 2. The result of some experiments: return=[\xmlfilter{#1}{../tag()}] returns the parent tag, in this case [setup] as expected return=[\xmlfilter{#1}{./tag()}] returns the tag, in this case [example] as expected return=[\xmlfilter{#1}{../position()}] returns [] i.e. returns nothing expecting a number return=[\xmlfilter{#1}{./position()}] returns [] i.e. returns nothing expecting a number return=[\xmlfilter{#1}{../index()}] returns [0] expecting a number larger than 0 return=[\xmlfilter{#1}{./index()}] returns [0] expecting a number larger than 0 dr. Hans van der Meer

1 0

Layout with equal margins.
by Pawel Urbanski 22 May '23

22 May '23

Dear Friends, I played wih hte setup and read the posts on the list. Apparently the mechanism for setting different margins can be confusing at times. At least, it is for a beginner. I want to create 2 versions of my book: Version 1: Goes to printing with different inner and outer margins due to binding and so on, Version 2: Can be downloaded and the left and right margins are equal size. I want ot keep the 6x9 size of a page, which is: 432x648pt. The sum of margins in both cases is 120pt. It leaves 312pt for the text content. When I do hte following: \setuplayout[ alternative=doublesided, width=fit, height=fit, leftmargin=60pt, leftmargin=60pt, ...] The makeup width and text width is calculated as 472pt and the margin appears to be set just on one side. I set both cutspace and backspace to 0pt. I assumed that either value is a particular area of the page. Has any one of you handled such a case? I'll be very glad to get some directions. I can create a simple document with modes or documents to illustrate my case if needed... Thank you, Pawel

3 6

FYI: created with LMTX
by Gerben Wierda 21 May '23

21 May '23

https://ea.rna.nl/archimate/free-archimate-overview-pdf/ <https://ea.rna.nl/archimate/free-archimate-overview-pdf/> The story at the end tells a bit about LMTX and how it was done (it's about 2500 lines of lua to parse the XML and produce the LMTX statements, and about 3500 lines of METAPOST/Metafun to produce the graphics). Gerben Wierda (LinkedIn <https://www.linkedin.com/in/gerbenwierda>, Mastodon <https://newsie.social/@gctwnl>) R&A IT Strategy <https://ea.rna.nl/> (main site) Book: Chess and the Art of Enterprise Architecture <https://ea.rna.nl/the-book/> Book: Mastering ArchiMate <https://ea.rna.nl/the-book-edition-iii/>

1 0

SVG ViewBox figure battle
by Thangalin 20 May '23

20 May '23

Hi there! The following document contains SVG. Save the SVG as "problem.svg" and run the document through LMTX version 2023.05.08 17:39: % SOF \startbuffer[csvg] <svg viewBox="0 0 100 100" version="1.1"> <path d="M0 0h100v100H0z" /> <path fill="#2d514e" d="M 72.474,42.6 33.073,42.8 51.872,-26.7 Z" /> </svg> \stopbuffer \starttext % honours viewbox \placefigure[none]{}{\includesvgbuffer[csvg]} \page % dishonours viewbox \externalfigure[problem.svg] \stoptext % EOF The ViewBox is ignored when run through Inkscape. Is this because the --export-area-page option is not being passed when invoked? Given identical inputs, would it make sense for placefigure and externalfigure to produce identical results? Cheers!

2 2

Inline framed verbatim text
by Jeroen 19 May '23

19 May '23

In order to get some inline framed verbatim text, I have in the past always used the following: \starttext This is an \inframed [frame=on, corner=00, radius=2mm,offset=-1.5pt] {\ttx \bf example} \stoptext Since this has come-up more and more often, I created the following: \define[1]\infr{ \inframed [frame=on, corner=00, radius=2mm,offset=-1.5pt]{#1}} \starttext This is an \infr{example} \stoptext This works fine except that I cannot get the text in verbatim/teletype. I have tried style=mono and style={\ttx \bf} but nothing seems to work. Thanks Jeroen

3 3

Probably simple: using a variable for \switchtobodyfont size
by Gerben Wierda 19 May '23

19 May '23

I want to use a variable for a font size so I can set it based on language (as some translated texts have widely different sizes) This fails: %=========================== \newdimen\relationsFontSize \relationsFontSize=8pt \starttext \switchtobodyfont[\relationsFontSize] Hello, world! \stoptext %=========================== How can I use a variable to steer \switchtobodyfont size? Gerben Wierda (LinkedIn <https://www.linkedin.com/in/gerbenwierda>, Mastodon <https://newsie.social/@gctwnl>) R&A IT Strategy <https://ea.rna.nl/> (main site) Book: Chess and the Art of Enterprise Architecture <https://ea.rna.nl/the-book/> Book: Mastering ArchiMate <https://ea.rna.nl/the-book-edition-iii/>

3 2

Replacer based on function rathen than tables
by Jairo A. del Rio 18 May '23

18 May '23

Hi, list. There's lang-rep.mkxl and lang-tra.mkxl in the distribution which allows replacing a list of words and applying transliteration, respectively. Both are based on tables. I want to know if there's a way to use a function instead, say local function nice(str) return str .. " is nice" end Thanks in advance. Best regards, Jairo

2 1

\placeinitial inside \framed?
by Gerben Wierda 16 May '23

16 May '23

I'd like to use a drop cap inside a \framed, but it doesn't work. Minimal example: %========================== \starttext \setupinitial[n=2,text=Knuth]\placeinitial\input knuth \framed[align=flushleft]{\setupinitial[n=2,text=Knuth]\placeinitial\input knuth } \stoptext %========================== The first drop cap works, the second is empty. Gerben Wierda (LinkedIn <https://www.linkedin.com/in/gerbenwierda>, Mastodon <https://newsie.social/@gctwnl>) R&A IT Strategy <https://ea.rna.nl/> (main site) Book: Chess and the Art of Enterprise Architecture <https://ea.rna.nl/the-book/> Book: Mastering ArchiMate <https://ea.rna.nl/the-book-edition-iii/>

2 2

Two columns of footnotes
by lynx＠polarcom.com 16 May '23

16 May '23

I own a commercially published book that has makes effective use of footnotes that are arranged in two columns on each page. Does anybody know how this can be set up within ConTeXt? MG

2 3

Flushright problems with Japanese
by Gerben Wierda 16 May '23

16 May '23

When I use flushright, my Japanese characters get widely spaced as if flushing right doesn't work Minimal example: % =============================== \definefallbackfamily [archimate] [ss] [Hiragino Sans] [preset=range:japanese, tf=style:W3, it=style:W3, bf=style:W5, bi=style:W5, force=yes] \definefontfamily [archimate] [ss] [Optima] \setupbodyfont[archimate] \startsetups [japanese] \setscript [nihongo] \stopsetups \setuplanguage [ja] [setups=japanese] \mainlanguage [ja] \starttext \setupindenting[none] \setupindenting[no] \framed[width=\textwidth,frame=off,align=flushleft]{作図：A bit of text} \framed[width=\textwidth,frame=off,align=flushright]{作図：A bit of text} \framed[width=\textwidth,frame=off,align=flushright]{作図: A bit of text} \framed[width=\textwidth,frame=off]{作図: A bit of text} \stoptext % =============================== Output: Gerben Wierda (LinkedIn <https://www.linkedin.com/in/gerbenwierda>, Mastodon <https://newsie.social/@gctwnl>) R&A IT Strategy <https://ea.rna.nl/> (main site) Book: Chess and the Art of Enterprise Architecture <https://ea.rna.nl/the-book/> Book: Mastering ArchiMate <https://ea.rna.nl/the-book-edition-iii/>

3 3

Module authors: please update your metadata
by Henning Hraban Ramm 16 May '23

16 May '23

Hi, I just updated the module writing guidelines, since I couldn’t find a description of the necessary structure of a module release file: https://wiki.contextgarden.net/Modules#Module_writing_guidelines I also added an explanation how the publishing via https://modules.contextgarden.net works. If you ever published a module, please check if its metadata is still correct, e.g. if the module works for MkIV / LMTX and how it should be published – some modules aren’t installable via rsync as outlined in https://wiki.contextgarden.net/Modules#ConTeXt_LMTX (For me, the “simplified version” works.) These modules get installed that way: f-urwgaramond f-urwgothic t-account t-algorithmic t-animation t-annotation t-bnf t-chromato t-cmscbf t-cmttbf t-construction-plan t-cyrillicnumbers t-degrade t-fancybreak t-filter t-fixme t-french t-fullpage t-games (not in dl) t-gantt t-gnuplot t-handlecsv (newer than in dl) t-layout t-letter t-lettrine t-lilypond (not in dl, obsolete) t-mathsets t-rst t-ruby t-simplefonts t-simpleslides t-tikz t-title t-transliterator t-typearea t-typescripts t-vim t-visualcounter Some of these are probably outdated, I didn’t check. If you know something is obsolete, please let us know or remove it yourself, if you still know your account data. Several more modules are available via https://modules.contextgarden.net/dl/ (mentioned as "dl" above). I added a comment where the directory structure isn’t quite right: PocketDiary-V2.zip (module folder on top) Collection-of-calendars-based-on-PocketDiary-module.zip (module folder on top) Date-driven-lists.zip (module folder on top) Environment-for-collating-marks.zip (module folder on top) aquamints (no structure) bibmod-doc (looks right) gfsdidot (looks right) grph-downsample.lua (looks right, except .lua in folder name) enigma.zip (looks right, except .zip in folder name) handlecsv (not unzipped, no VERSION file, but newer version in dl) high (looks right) karnaugh (looks right) lua-widow-control (looks right) lucida-cint.zip (looks right, except .zip in folder name) metaducks (metaducks folder on top) presvoz (looks right) pret-c.lua (looks right, except .lua in folder name) stormfontsupport (looks right) sudoku (sudoku folder on top) t-gm (looks right) t-greek (looks right) t-gs (looks right) t-inifile (looks right) t-layout (looks right) t-letterspace.mkiv (looks right, except .mkiv in folder name) t-rsteps (looks right) t-simplebib (looks right) t-taspresent (looks right) u-texshow (looks right) (“looks right” only means that the structure looks like TDS, many are old and probably obsolete, but a few are quite new, like the first four by Willi) All the best & happy TeXing, Hraban

4 7

Is there a way to centrally add a list of indexed items to a sub category?
by Joel 15 May '23

15 May '23

I have a document like this: \starttext \index{dogs} \index{cats} \index{flowers} \index{snails} \index{trees} \placeindex \stoptext As I understand, if you use \index{animals+dogs}, it will place dogs as a sub-category of dogs. Is there any way to control this centrally, for instance: \addtosub[animals]{dogs, cats, snails} \addtosub[plants]{flowers, trees} Such a way would make it so \index{dogs} places an entry for "dog" under "d" and "animals --> dogs" under "a". --Joel

4 4

17th ConTeXt Meeting, Prague, 10.–16. 9. 2023: Registration Open
by Jano Kula 15 May '23

15 May '23

Dear list members! Registration for the 17th ConTeXt Meeting <https://meeting.contextgarden.net/2023/> is now open. We will meet at our favourite place close to Prague for the 3rd time. Come and join us to hear all the great news about new developments of ConTeXt and LuaMetaTex, meet developers and friends from this list. Better come in person, though registration for online participation for the small fee is open, too. Important dates: - *May 15th 2023,* beginning of registration - *July 31st, 2023,* deadline for early bird payment - *August 20th, 2023,* registration closes, ask for options after this deadline - *September 10th–16th, 2023,* 17th ConTEXt Meeting Never been to the ConTeXt Meeting? Don't worry, the group of regular participants is open and friendly, and you don't know what you are missing, unless you come at least once. Different discounts <https://meeting.contextgarden.net/2023/fee.shtml> are available. See you in September! Jano on behalf of the ConTeXt Group Board

2 1

Bug in context
by Lutz Haseloff 14 May '23

14 May '23

Hi Hans, hi all, I mainly use ConTeXt in a server environment. So I am a friend of the console. I found a small problem there. When I invoke context with parameter --ansi, the logfile remains empty. I tried Linux aarch64 and Windows64. Greetings Lutz

3 2

installer
by Hans Hagen 13 May '23

13 May '23

Hi, The mtx-install-tikz is now mtx-install-modules, so mtxrun --script install-modules will show what to do. By looking at mtxrun --script install-modules --list some might be inspired to adapt then name of the archive to more fit the t-* scheme. Willi's updated module wins the price for the lonbgest name and I didn't want to impose on users to key that one in. So: - which ones are missing - which ones are obsolete - which modules deserve better names - do we need more features - should we push to and fetch from ctan instead (in the future) The outlier is tikz where we also need to wipe files (maybe more needs to be wiped). I had to adapt some 'unzip archives' code because two modules were kind of different (delayed compression data) and I hope it doesn't affect the regular installer (as I couldn't test that here) but we'll notice that soon enough. The lazy user can run mtxrun --script install-modules --install --all but best is to go lightweight (as there are some modules related to typescripts that might be outdates). Someone (not me) has to adapt the wiki. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

8 17

This is rmally done by loading special math fonts into the math family slots.
by Carlos 11 May '23

11 May '23

Hello list the whole error message I get is tex error > tex error on line 90 in file ./atestinminion-context.mkiv: Math error: parameter 'operatorsize' with id 8 in style 0 is not set <macro> \m_operator_text \endgroup \Ustopmathmode <macro> \m_operator_text \stopforceddisplaymath \egroup \ifcase \c_strc_formulas_frame_mode \else \strc_math_number_check_offsets \fi \ifcase \c_strc_formulas_frame_mode \strc_math_number_check \or \strc_math_number_check_outside \else \strc_math_number_check_inside \fi \str <macro> \m_operator_text \endgroup \strc_formulas_endstrut \stopinnermath \afterdisplayspace \egroup <macro> \m_operator_text \strc_formulas_place_number \strc_formulas_flush_number \dostarttagged \t!formulacontent \empty \dotagregisterformula \c_strc_formulas_n \csname \e!stop \formulaparameter \c!alternative \v!formula \endcsname \dostoptagged \dostoptagged \nonoindentati <line 3.90> \stopformula \startformula \int_{\infty} >> \stopformula Sorry, but I can't typeset math unless various parameters have been set. This is normally done by loading special math fonts into the math family slots. Your font set is lacking at least the parameter mentioned earlier. What parameter is this referring to here? If I were to load sans it finishes off without errors on the math side, but then again, doesn't load sans at all mkiv lua stats > loaded fonts: 2 files: latinmodern-math.otf, minionpro-regular.otf And as you can guess, the above is not I was looking forward to -- Real computer scientists don't comment their code. The identifiers are so long they can't afford the disk space.

3 8

Custom TOC with makeup and setups
by Jethro Djan 10 May '23

10 May '23

Hello, I am trying to create a presentation where at the start of each section in my presentation, a custom TOC page is shown. When I am at a particular section, the TOC will grey out all other sections (not implemented in my MWE). I have tried different ways but I find using makeups for the TOC page works ok (following https://wiki.contextgarden.net/Command/setuplistalternative and Aditya's presentation slides on their blog). My challenge is that when a makeup page is inserted, it leaves a page with the section name blank before it. How do I fix it? Any other way to achieve this is also welcome. My MWE: \setuppapersize[S6] \startuseMPgraphic{itemize:toc} save p; path p; p := ( (0,-0.5)--(0,0.5)--(0.866,0)--cycle ) scaled 1.5ExHeight; fill p withcolor \MPcolor{Black}; \stopuseMPgraphic \definesymbol[itemize:toc][\useMPgraphic{itemize:toc}] \definelistalternative [toclist] [renderingsetup=list:toclist] \setupheadtext[section=Table of Contents] \startsetups toclist \framed[align=normal, frame=off]{\placelist [section] [criterium=all, alternative=toclist]} \stopsetups \definehspace[tspace][4cm] \setupframed[ height=fit, width=fit, location=middle, frame=off, align=normal, offset=none, ] \startsetups list:toclist {\hbox to \hsize \bgroup \hspace[tspace] \framed[width=10mm,align=flushleft]{\symbol[itemize:toc]}% \framed[empty=yes]{\currentlistentrynumber\currentlistentrypagenumber}% \doifelse\currentlistentrylocation{\namedstructureheadlocation{section}}{% \framed[align=flushright,]{{\bfb\currentlistentrytitle}}% }{\framed[align=flushright,]{\currentlistentrytitle}} \egroup} \stopsetups \definemakeup [toc] [ doublesided=no, page=yes, bottom=, top=, pagestate=start, headerstate=empty, footerstate=empty, setups={toclist}, before=\setups{toc:setups}, ] \startsetups toc:setups \setupbackgrounds[page][background=color, backgroundcolor=blue] \stopsetups \definemakeup [standard] [ doublesided=no, page=right, pagestate=start, headerstate=empty, footerstate=empty, before=\setups{standard:setups}, ] \startsetups standard:setups \setupbackgrounds[page][background=color, backgroundcolor=lightgray] \stopsetups \define\TOC{ \starttocmakeup \stoptocmakeup } \starttext \startstandardmakeup \title{Your Title Here} \stopstandardmakeup \startsection[title={Motivation}] \TOC \startitemize \item something cool \item something else cool \stopitemize \stopsection \startsection[title={Main strands of theory}] \TOC \startitemize \item another cool thing \item cool too \stopitemize \stopsection \stoptext Thanks in advance. Jethro

1 0

regular online meet-up
by Henning Hraban Ramm 10 May '23

10 May '23

You’re invited to join on Wednesday, May 10th, 15:00 CEST (UTC+2) at https://lecture.senfcall.de/hen-rbr-rku-oke (same, but shorter: https://v34h.de/ctxmtg) ConTeXt users of all levels are welcome! Next meeting will be on June 14th. (Same blurb as every time:) [Howto] * No special software installation required; most modern browsers should work (WebRTC required). * Open the above URL, accept the privacy statement, * enter your name, * click "join" (or "start" if you’re the first), * click "with microphone", allow your browser to access it, check the audio. * Your microphone is muted if you join. Activate microphone and/or camera with the buttons at the bottom. * Minimize the default presentation with the "screen" button, bottom right. * If you’d like to share your screen or upload a file, you can make yourself the presenter: Click on your user name, change the setting, then you’ll see the "screen sharing" button beside the camera button; also there’s now "manage presentations" behind the "plus" button. Beware there is only one presenter at a time, so don’t kill someone else’s presentation. [Technical hints] * Sound is usually better if you use a headset (less noise for everyone). * Connection problems are mostly due to low bandwidth or high latency on your side, e.g. with mobile connections. * If audio/video doesn’t work for you, you can still use the text chat. * Screen sharing needs a lot of bandwidth. * BigBlueButton documentation applies: https://bigbluebutton.org/teachers/tutorials/ [Netiquette] * Please use a name that we recognize from here. Some feel uncomfortable with anonymous lurkers. * Mute your microphone while you’re not talking. * It’s nice to show your face at least when you join. * If there are connection problems, stop camera sharing. * The room is set to “everyone’s a moderator“, I trust you... See you, Hraban

1 1

Re: [NTG-context] ntg-context Digest, Vol 227, Issue 15
by Sebastian Ørsted 09 May '23

09 May '23

Could I get removed from this mailing list please? Thank you in advance On Tue, 9 May 2023 at 18:05, <ntg-context-request(a)ntg.nl> wrote: > Send ntg-context mailing list submissions to > ntg-context(a)ntg.nl > > To subscribe or unsubscribe via the World Wide Web, visit > https://mailman.ntg.nl/mailman/listinfo/ntg-context > or, via email, send a message with subject or body 'help' to > ntg-context-request(a)ntg.nl > > You can reach the person managing the list at > ntg-context-owner(a)ntg.nl > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of ntg-context digest..." > > > Today's Topics: > > 1. Re: This is rmally done by loading special math fonts into > the math family slots. (Mikael Sundqvist) > 2. Re: This is rmally done by loading special math fonts into > the math family slots. (Carlos) > 3. Re: This is rmally done by loading special math fonts into > the math family slots. (Carlos) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 9 May 2023 16:46:42 +0200 > From: Mikael Sundqvist <mickep(a)gmail.com> > To: mailing list for ConTeXt users <ntg-context(a)ntg.nl> > Subject: Re: [NTG-context] This is rmally done by loading special math > fonts into the math family slots. > Message-ID: > < > CAHy-LL9-tprwSutrnJH2Qx5_PXDhgmGFvZ+ckRfqV9eh88ARtQ(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > On Tue, May 9, 2023 at 4:20?PM Carlos via ntg-context > <ntg-context(a)ntg.nl> wrote: > > > > > > > > Hello list > > > > the whole error message I get is > > > > tex error > tex error on line 90 in file > ./atestinminion-context.mkiv: Math error: parameter 'operatorsize' with id > 8 in style 0 is not set > > > > <macro> \m_operator_text > > \endgroup \Ustopmathmode > > <macro> \m_operator_text > > \stopforceddisplaymath > > \egroup \ifcase \c_strc_formulas_frame_mode \else > \strc_math_number_check_offsets \fi \ifcase \c_strc_formulas_frame_mode > \strc_math_number_check \or \strc_math_number_check_outside \else > \strc_math_number_check_inside \fi \str > > <macro> \m_operator_text > > \endgroup \strc_formulas_endstrut \stopinnermath > > \afterdisplayspace \egroup > > <macro> \m_operator_text > > \strc_formulas_place_number \strc_formulas_flush_number > \dostarttagged \t!formulacontent \empty \dotagregisterformula > \c_strc_formulas_n \csname \e!stop \formulaparameter \c!alternative > \v!formula \endcsname > > \dostoptagged \dostoptagged \nonoindentati > > <line 3.90> > > \stopformula > > > > \startformula > > \int_{\infty} > > >> \stopformula > > > > Sorry, but I can't typeset math unless various parameters have been set. > This is > > normally done by loading special math fonts into the math family slots. > Your font > > set is lacking at least the parameter mentioned earlier. > > > > What parameter is this referring to here? > > Looks like you might not have the Minion math font. Did you buy it? > > /Mikael > > > ------------------------------ > > Message: 2 > Date: Tue, 9 May 2023 10:49:43 -0400 > From: Carlos <linguafalsa(a)gmail.com> > To: ntg-context(a)ntg.nl > Subject: Re: [NTG-context] This is rmally done by loading special math > fonts into the math family slots. > Message-ID: > <bc43w5ociojyr3fgd7lmaptavo47ca4ptfchvg56mx5xgans3p@vpffelite3mo> > Content-Type: text/plain; charset=us-ascii > > > > > > tex error > tex error on line 90 in file > ./atestinminion-context.mkiv: Math error: parameter 'operatorsize' with id > 8 in style 0 is not set > > > > <macro> \m_operator_text > > \endgroup \Ustopmathmode > > <macro> \m_operator_text > > \stopforceddisplaymath > > \egroup \ifcase \c_strc_formulas_frame_mode \else > \strc_math_number_check_offsets \fi \ifcase \c_strc_formulas_frame_mode > \strc_math_number_check \or \strc_math_number_check_outside \else > \strc_math_number_check_inside \fi \str > > <macro> \m_operator_text > > \endgroup \strc_formulas_endstrut \stopinnermath > > \afterdisplayspace \egroup > > <macro> \m_operator_text > > \strc_formulas_place_number \strc_formulas_flush_number > \dostarttagged \t!formulacontent \empty \dotagregisterformula > \c_strc_formulas_n \csname \e!stop \formulaparameter \c!alternative > \v!formula \endcsname > > \dostoptagged \dostoptagged \nonoindentati > > <line 3.90> > > \stopformula > > > > \startformula > > > \int_{\infty} > > > >> \stopformula > > > > > Sorry, but I can't typeset math unless various parameters have been set. > This is > > normally done by loading special math fonts into the math family slots. > Your font > > set is lacking at least the parameter mentioned earlier. > > > > What parameter is this referring to here? > > > > If I were to load sans it finishes off without errors on the math side, > > but then again, doesn't load sans at all > > > > mkiv lua stats > loaded fonts: 2 files: latinmodern-math.otf, > minionpro-regular.otf > > > > And as you can guess, the above is not I was looking forward to > > in other words, this is wanted > > mkiv lua stats > loaded fonts: 4 files: minionpro-bold.otf, > minionpro-it.otf, minionpro-regular.otf, myriadpro-regular.otf > > but then again, it's not possible without the preloaded > latinmodern-math if a math environment is included. > > > > > > > -- > > Real computer scientists don't comment their code. The identifiers are > > so long they can't afford the disk space. > > > > > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an entry > to the Wiki! > > > > maillist : ntg-context(a)ntg.nl / > https://www.ntg.nl/mailman/listinfo/ntg-context > > webpage : https://www.pragma-ade.nl / http://context.aanhet.net > > archive : https://bitbucket.org/phg/context-mirror/commits/ > > wiki : https://contextgarden.net > > > ___________________________________________________________________________________ > > > -- > `Lasu' Releases SAG 0.3 -- Freeware Book Takes Paves For New World Order > by staff writers > > Helsinki, Finland, August 6, 1995 -- In a surprise movement, Lars > ``Lasu'' Wirzenius today released the 0.3 edition of the ``Linux System > Administrators' Guide''. Already an industry non-classic, the new > version sports such overwhelming features as an overview of a Linux > system, a completely new climbing session in a tree, and a list of > acknowledgements in the introduction. > The SAG, as the book is affectionately called, is one of the > corner stones of the Linux Documentation Project. ``We at the LDP feel > that we wouldn't be able to produce anything at all, that all our work > would be futile, if it weren't for the SAG,'' says Matt Welsh, director > of LDP, Inc. > The new version is still distributed freely, now even with a > copyright that allows modification. ``More dough,'' explains the author. > Despite insistent rumors about blatant commercialization, the SAG will > probably remain free. ``Even more dough,'' promises the author. > The author refuses to comment on Windows NT and Windows 96 > versions, claiming not to understand what the question is about. > Industry gossip, however, tells that Bill Gates, co-founder and CEO of > Microsoft, producer of the Windows series of video games, has visited > Helsinki several times this year. Despite of this, Linus Torvalds, > author of the word processor Linux with which the SAG was written, is > not worried. ``We'll have world domination real soon now, anyway,'' he > explains, ``for 1.4 at the lastest.'' > ... > -- Lars Wirzenius <wirzeniu(a)cs.helsinki.fi> > [comp.os.linux.announce] > > > > ------------------------------ > > Message: 3 > Date: Tue, 9 May 2023 11:02:26 -0400 > From: Carlos <linguafalsa(a)gmail.com> > To: ntg-context(a)ntg.nl > Subject: Re: [NTG-context] This is rmally done by loading special math > fonts into the math family slots. > Message-ID: > <i3pstvqyqiywewycikgkjldlaphvj33q265n7izpvda3qer63p@jjhrpgsgzzj3> > Content-Type: text/plain; charset="utf-8" > > > On Tue, May 09, 2023 at 04:46:42PM +0200, Mikael Sundqvist via ntg-context > wrote: > > On Tue, May 9, 2023 at 4:20?PM Carlos via ntg-context > > <ntg-context(a)ntg.nl> wrote: > > > > > > > > > > > > Hello list > > > > > > the whole error message I get is > > > > > > tex error > tex error on line 90 in file > ./atestinminion-context.mkiv: Math error: parameter 'operatorsize' with id > 8 in style 0 is not set > > > > > > <macro> \m_operator_text > > > \endgroup \Ustopmathmode > > > <macro> \m_operator_text > > > \stopforceddisplaymath > > > \egroup \ifcase \c_strc_formulas_frame_mode \else > \strc_math_number_check_offsets \fi \ifcase \c_strc_formulas_frame_mode > \strc_math_number_check \or \strc_math_number_check_outside \else > \strc_math_number_check_inside \fi \str > > > <macro> \m_operator_text > > > \endgroup \strc_formulas_endstrut \stopinnermath > > > \afterdisplayspace \egroup > > > <macro> \m_operator_text > > > \strc_formulas_place_number \strc_formulas_flush_number > \dostarttagged \t!formulacontent \empty \dotagregisterformula > \c_strc_formulas_n \csname \e!stop \formulaparameter \c!alternative > \v!formula \endcsname > > > \dostoptagged \dostoptagged \nonoindentati > > > <line 3.90> > > > \stopformula > > > > > > \startformula > > > \int_{\infty} > > > >> \stopformula > > > > > > Sorry, but I can't typeset math unless various parameters have been > set. This is > > > normally done by loading special math fonts into the math family > slots. Your font > > > set is lacking at least the parameter mentioned earlier. > > > > > > What parameter is this referring to here? > > > > Looks like you might not have the Minion math font. Did you buy it? > > Oh. That's what the math slot refers to then! I didn't buy it. I've been > shoved > acroread before without asking and I had the whole set sans math > > thanks Mikael > > > > /Mikael > > > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an entry > to the Wiki! > > > > maillist : ntg-context(a)ntg.nl / > https://www.ntg.nl/mailman/listinfo/ntg-context > > webpage : https://www.pragma-ade.nl / http://context.aanhet.net > > archive : https://bitbucket.org/phg/context-mirror/commits/ > > wiki : https://contextgarden.net > > > ___________________________________________________________________________________ > > -- > If I'd known computer science was going to be like this, I'd never have > given up being a rock 'n' roll star. > -- G. Hirst >

1 0

new module installer and .tar.gz compression
by Pablo Rodriguez 09 May '23

09 May '23

Hans, many thanks for the new script to install modules in LMTX. I forced a new release of handlecsv (https://modules.contextgarden.net/cgi-bin/module.cgi/action=view/id=86) I provide the contents with a git address, so I cannot choose which kind of compression the code will have. Since imports from git use .tar.gz, these modules cannot be installed with the script (which seems to expect .zip compression exclusively). Sorry, but I don’t know how to force git urls to be added as zip packages in https://modules.contextgarden.net. Many thanks for your help, Pablo

5 9