ntg-context April 2014

ntg-context@ntg.nl

64 participants
150 discussions

Re: [NTG-context] Hebrew vowel placement in ConTeXt.
by Michael Ash 02 May '14

02 May '14

Thank you. The unicode text looked good (although reversed left-to-right as I sent it) in my sent mail, and it looked perfect (corrected right-to-left) in your response. But it did not look good in the digest email (all the letters were convered to ?'s). Also it's typesetting fine in ConTeXt except for the vowel placement. Any suggestions there? Thank you again. Yours, Michael On Mon, Jun 17, 2013 at 12:22 PM, Idris Samawi Hamid ادريس سماوي حامد < ishamid(a)colostate.edu> wrote: > Greetings, Michael, > > > On Mon, 17 Jun 2013 10:15:11 -0600, Michael Ash <mash(a)econs.umass.edu> > wrote: > > Is there a standard way to send unicode text to this list? >> > > Your Unicode text came through perfectly: > > > \textdir TRT >> \hebrew >> לָכֵן חַכּוּ־לִי נְאֻם־יְהוָה לְיוֹם קוּמִי לְעַד כִּי מִשְׁפָּטִי >> לֶאֱסֹף גּוֹיִם לְקָבְצִי מַמְלָכוֹת לִשְׁפֹּךְ עֲלֵיהֶם זַעְמִי כֹּל >> חֲרוֹן אַפִּי כִּי בְּאֵשׁ קִנְאָתִי תֵּאָכֵל כָּל־הָאָרֶץ׃ >> \stoptext >> > > Maybe the encoding of your browser/mail-client needs to be set to > "Unicode" ("Automatic" usually works too). > > For high-level text-direction control, you may experiment with > > \righttoleft > \lefttoright > > as well as > > \setupdirections[bidi=global] > \setupdirections[bidi=local] > > Best wishes > Idris > -- > Professor Idris Samawi Hamid > Department of Philosophy > Colorado State University > Fort Collins, CO 80523 -- Michael Ash, Chair, Department of Economics Professor of Economics and Public Policy University of Massachusetts Amherst, MA 01003 Email mash(a)econs.umass.edu Tel +1-413-545-2590 Twitter @michaelaoash

4 6

tabulate: header not repeated
by Procházka Lukáš Ing. - Pontex s. r. o. 02 May '14

02 May '14

Hello, 'tabulate' header is not repeated across pages, the header appears only at the begin of the 'tabulate'. The code is based on http://wiki.contextgarden.net/Tabulate#Headers ---- \starttext \setuptabulate[split=yes,header=repeat] \starttabulatehead \HL \NC A \NC B \NC\NR \HL \stoptabulatehead \starttabulate[|l|l|] %\starttabulatebody \dorecurse{100}{\NC a \NC b \NC\NR} %\stoptabulatebody \stoptabulate \stoptext ---- Where is the problem? Best regards, Lukas -- Ing. Lukáš Procházka [mailto:LPr@pontex.cz] Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz] Bezová 1658 147 14 Praha 4 Tel: +420 241 096 751 Fax: +420 244 461 038

2 2

joinedup in itemize changed?
by Mikael P. Sundqvist 02 May '14

02 May '14

Hi, has joinedup changed? At the moment it gives no white space before first item and last item _and_ pack it. See example. Best regards, Mikael \starttext Bla \startitemize[3]%OK \item One \item Two \item Three \stopitemize Bla \startitemize[3,joinedup]% Not as expected \item One \item Two \item Three \stopitemize Bla \startitemize[3,packed]%OK \item One \item Two \item Three \stopitemize Bla \startitemize[3,packed,joinedup]%OK \item One \item Two \item Three \stopitemize Bla \stoptext

4 5

too many open files?
by Andrea Valle 01 May '14

01 May '14

Dear, I’m compiling the new version of my manual on the SuperCollider language, using a project structure, and I’m including a lot of pdfs, as I’m automatically generating figures containing colorised code that have to included in the book. Btw I’m quite happy of the results! Thanks to devs for your work. Anyway, I’m stuck at this. I’m getting this error, seems related to the number of included pdfs </paperiProgetti/SC/introSC/code/controlli/map.pdfI/O Error: Couldn't open file '/paperiProgetti/SC/introSC/code/controlli/map.pdf': Too many open files. !LuaTeX error: xpdf: reading PDF image failed ==> Fatal error occurred, no output PDF file produced! What can I do? Thanks a lot, Best -a- -------------------------------------------------- Andrea Valle -------------------------------------------------- CIRMA - StudiUm Università degli Studi di Torino --> http://www.cirma.unito.it/andrea/ --> http://www.fonurgia.unito.it/andrea/ --> http://www.flickr.com/photos/vanderaalle/sets/ --> http://vimeo.com/vanderaalle --> andrea.valle(a)unito.it -------------------------------------------------- "This is a very complicated case, Maude. You know, a lotta ins, a lotta outs, a lotta what-have-yous." (Jeffrey 'The Dude' Lebowski)

2 2

automatically adding commands to some characters
by Pablo Rodriguez 01 May '14

01 May '14

Dear list, with slashes and en-dashes I experience the following in ConTeXt: sometimes I need to add an \hskip0pt command after them to allow linebreaks. One example would be "Council Directive 93/98/EEC". The issue comes when using ConTeXt as target format from markdown sources. pandoc generates the file, but it makes no sense to edit the ConTeXt source. Is there any command that allows the addition of arbitrary commands when a character appears in text? I mean, a way that internally replaces "Council Directive 93/98/EEC" with "Council Directive 93/\hskip0pt 98/\hskip0pt EEC" Many thanks for your help, Pablo -- http://www.ousia.tk

2 2

Empty heads after leading whitespace
by Maggyero 01 May '14

01 May '14

Hello, Here after is my problem: \setuphead[section][% placehead=empty, before=, after=] \setuphead[subsection][% placehead=yes, before={\blank[line]}, after={\blank[line]}] \setupheadertexts[section] \starttext \showframe \section{My section} \subsection{My subsection (whitespace before: )} % Here is my problem. \page \subsection{My subsection (NO whitespace before)} \stoptext The mechanism that automatically removes the leading whitespace at the top of a page doesn't work if there is an EMPTY head followed by another head (of a different level). How can I remove that whitespace? Best regards.

2 1

Re: [NTG-context] Force two figures to appear on the same page
by Andres Conrado 30 Apr '14

30 Apr '14

I forgot to include a MWE: %%%%%%%%%%%%%%%%%%%%%% \starttext \setupexternalfigures[location={local, default}] \startcombination[1*3] {\externalfigure[cow][height=1cm]} {d} {\externalfigure[cow][height=1cm]} {e} {\externalfigure[cow][height=1cm]} {f} \stopcombination \stoptext %%%%%%%%%%%%%%%%%%%%% Andres

1 0

Position of integral limits
by Darksair 30 Apr '14

30 Apr '14

Hi, I notice today that in display math, \int_a^b places a and b completely below and above the integral symbol, rather than offsets them to the right at the bottom and top as LaTeX does by default. I also notice that I can use \int\nolimits to achieve the LaTeX result. Is this the supposed behavior of ConTeXt? Because I remember this was not the case 2 years ago. Also can I somehow let ConTeXt use that \nolimits by default? Thanks. -- Fear is the path to the dark side. Fear leads to anger, Anger leads to hate, Hate leads to suffering

2 2

A new question on \definefallbackfamily
by Mikael P. Sundqvist 30 Apr '14

30 Apr '14

Hi, With the file below (and the latest Standalone) I get different output different times I compile. Sometimes the fourth 3 is bold and sometimes it is not (I don't want it to be bold). What is going on? I attach also the log files from a successful run (test.log) and a failure (test-error.log). Also, the pdf files are attached. (what I want is to use the light font as default and the regular one as bold...) Best regards, Mikael %%% TEST FILE \definefontfamily [lundfaces] [rm] [Adobe Garamond Pro][opticalsize=yes] \definefontfamily [lundfaces] [ss] [FrutigerLTstd][opticalsize=yes,tf=style:light,it=style:lightitalic,sl=style:lightitalic,bf=style:normal,scale=0.92] \definefallbackfamily [lundfaces] [math] [FrutigerLTstd] [preset=math:lowercaseitalic,tf=style:lightitalic,scale=0.92] \definefallbackfamily [lundfaces] [math] [FrutigerLTstd] [preset=math:lowercasebolditalic,tf=style:italic,scale=0.92] \definefallbackfamily [lundfaces] [math] [FrutigerLTstd] [preset=math:lowercasenormal,tf=style:light,scale=0.92] \definefallbackfamily [lundfaces] [math] [FrutigerLTstd] [preset=math:lowercasebold,tf=style:normal,scale=0.92] \definefallbackfamily [lundfaces] [math] [FrutigerLTstd] [preset=math:uppercaseitalic,tf=style:lightitalic,scale=0.92] \definefallbackfamily [lundfaces] [math] [FrutigerLTstd] [preset=math:uppercasebolditalic,tf=style:italic,scale=0.92] \definefallbackfamily [lundfaces] [math] [FrutigerLTstd] [preset=math:uppercasenormal,tf=style:light,scale=0.92] \definefallbackfamily [lundfaces] [math] [FrutigerLTstd] [preset=math:uppercasebold,tf=style:normal,scale=0.92] \definefallbackfamily [lundfaces] [math] [FrutigerLTstd] [preset=math:digitsnormal,tf=style:light,scale=0.92] \definefallbackfamily [lundfaces] [math] [FrutigerLTstd] [preset=math:digitsbold,tf=style:normal,scale=0.92] \definefontfamily [lundfaces] [math] [TeX Gyre Pagella Math] \definebodyfontenvironment[18pt] \setupbodyfont[lundfaces,ss,18pt] \starttext {3 $3$} {\bf 3 $3$} \stoptext %%% END TEST FILE

1 1

Force two figures to appear on the same page
by Thomas Möbius 30 Apr '14

30 Apr '14

Dear ConTeXt list, I have multiple figures appearing in a single chapter which are roughly half a page in height. They would fit on top of each other. It seems as if context is only putting floats on top of each other if at least 2 lines of text fit underneath them. How to force two figures which fit on one page to also appear on one page? As you can see in the example below, the chapter would otherwise end with a lengthy list of figures. I'd prefer, if the chapter ends with text. If I'd use `force`, text would stop wrapping around the floats. The cow.png file is a copy of the graphic appearing on http://wiki.contextgarden.net/Command/externalfigure ---minimal example-- \starttext \chapter{Aasntheo asoetnh} \input knuth \input knuth \input knuth \placefigure [here] [fig:experiment:h:box:sd] {Hey} {\externalfigure[cow.png][height=.45\textheight,frame=on]} \placefigure [here] [fig:experiment:h:box:sd] {Ho} {\externalfigure[cow.png][height=.45\textheight,frame=on]} \placefigure [here] [fig:experiment:h:box:sd] {Ho} {\externalfigure[cow.png][height=.45\textheight,frame=on]} \placefigure [here] [fig:experiment:h:box:sd] {Ho} {\externalfigure[cow.png][height=.45\textheight,frame=on]} \input knuth \input knuth \input knuth \input knuth \input knuth \stoptext

1 0

← Newer
1
2
3
4
5
6
7
...
15
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

ntg-context April 2014