ntg-context November 2012

ntg-context@ntg.nl

65 participants
191 discussions

No header and no page-number on empty pages
by "H. Özoguz" 30 Nov '12

30 Nov '12

Am 29.11.2012 19:09, schrieb ntg-context-request(a)ntg.nl: > \definepagebreak > [mychapterpagebreak] > % [yes,header,right] > %[yes,header,left] > [yes,header,footer,right] > > \setuphead > [chapter] > [page=mychapterpagebreak] > %[page=Mychapterpagebreak,header=empty,footer=empty] > > %\setupsectionblock[frontpart][page=chapter] > %\setupsectionblock[bodypart][page=chapter] > %\setupsectionblock[backpart][page=chapter] > %\setupsectionblock[appendix][page=chapter] > > \setuppagenumbering[alternative=doublesided,location={header,margin}] > \setupheadertexts[{My special headertext}] > \setupfootertexts[This is a text in the footer] > %\setupbackgrounds[header][text][bottomframe=on] > > \starttext > \chapter{testA} \dorecurse{10}{\input tufte } > \chapter{testB} \dorecurse{10}{\input tufte } > \chapter{testC} \dorecurse{10}{\input tufte } > \stoptext > test- Thanks Luigi, Wolfgang. But this does not work if I use "\page~\page" (I need that in some cases for manually inserting a empty page). So the question is how to insert empty pages – but of course respect them in page numbering, I mean that the number is not shown on the page, but the page is counted, s.t. the next pages have the correct numbers). Huseyin

3 2

Start\Stop with Wolfgangs Annotation Module
by "H. Özoguz" 30 Nov '12

30 Nov '12

Hi, Im using Wolfgangs annotation module and have defined an annotation: \defineannotation[bigquote] with some setups. Now \bigquote{...} works correctly. But I want for big annotations \startbigquote \stopbigquote, how to do that? I tried it with \definestartstop, but failed. Thanks Huseyin

2 1

Underlined section
by "H. Özoguz" 30 Nov '12

30 Nov '12

How to define a new title - like section, but aligned in the center and underlined? So far I got: \definehead[mysection][section] \setuphead[mysection][alternative=middle] How to get the underlining in that? Thanks! Huseyin

2 1

Re: [NTG-context] Unresolved third-party modules
by Vyatcheslav Yatskovsky 29 Nov '12

29 Nov '12

Hi, Wolfgang, I believe it doesn't matter what parameter is, because the files are downloaded successfully. I use not first-setup.sh, but my own Windows installer. One thing that is different from the last time I updated my Context (more than year ago), is texmf-modules folder in the root. So, now the path to fullpage is D:\contextminimal\texmf-modules\tex\context\third\fullpage while it was D:\contextminimal\texmf-context\tex\context\third\fullpage Maybe texmf-modules is not registered in the tree for some reason? Maybe, it needs a separate environment variable set, e.g. TEXMODULES?? Regards, Vyatcheslav

2 1

toppath
by Procházka Lukáš Ing. - Pontex s. r. o. 29 Nov '12

29 Nov '12

Hello, there was a discussion about 'toppath' or 'pathrelativetome'. Is 'toppath:' prefix working? Or what other way is to refer to the path of the current file (i.e. the file I'm referring from)? The following code doesn't work - "t-Hello.mkiv" is not found although it's located in the same directory as "t-TopPath.mkiv"; the "t-TopPath.mkiv" is compiled from ONE LEVEL UP. So e.g. let's have: c:\Lukas\ConTeXt\Test\t-TopPath.mkiv c:\Lukas\ConTeXt\Test\t-Hello.mkiv and let's switch to current (working) directory to: c:\Lukas\ConTeXt and call: context.exe Test\t-TopPath.mkiv In this situation compilation fails. How to make it work? TIA. Best regards, Lukas -- Ing. Lukáš Procházka [mailto:LPr@pontex.cz] Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz] Bezová 1658 147 14 Praha 4 Tel: +420 244 062 238 Fax: +420 244 461 038

3 6

Standalone "current"
by Bill Meahan 29 Nov '12

29 Nov '12

What, if anything, is the difference between the version of ConTeXt in the TeXLive distribution and the version one gets when running first-setup.sh --context=current --modules=all ? -- Bill Meahan Westland, Michigan USA

3 3

No header and no page-number on empty pages
by "H. Özoguz" 29 Nov '12

29 Nov '12

Hi there, there are some possibilities for getting empty pages in a book, f.e. if a new chapter begins (and by settings it may only begin on pages with odd pagenumber). In these cases I want the page-number and the headers to disappear on the empty page, it should be totally empty, if no text is in it. How to achieve that? Thanks Huseyin

3 2

\setupbreakpoints[compound] does not work?
by "H. Özoguz" 29 Nov '12

29 Nov '12

Hi, in the following example I use \setbreakpoints[compound], I understood, that word-breaking would be made (or preferred) at hyphens. There could be a perfect line break at the hyphen of "-CC", but there is no break, and instead the complete word "AA-BB-CC" is printed, then partially in the margin. \setbreakpoints[compound] \showframe \version[temporary] \starttext .......................................................................................................................AA-BB-CC. And the next sentence. \stoptext Why that does not work? Huseyin

2 1

\cldcommand
by Procházka Lukáš Ing. - Pontex s. r. o. 29 Nov '12

29 Nov '12

Hello, the following shortening "\ctxlua{commands.doif" to "\cldcommand{doif" doesn't work as I'd expect, although it should be equal: ---- \starttext A \ctxlua{commands.doif(true)}{T} % Gives "T" - that's OK \cldcommand{doif(true)}{t} % Gives nothing; why? B \stoptext ---- Probably very basic question... What am I doing wrong? Best regards, Lukas -- Ing. Lukáš Procházka [mailto:LPr@pontex.cz] Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz] Bezová 1658 147 14 Praha 4 Tel: +420 244 062 238 Fax: +420 244 461 038

2 2

tabulate & \midaligned
by Procházka Lukáš Ing. - Pontex s. r. o. 29 Nov '12

29 Nov '12

Hello, the \start/stop-tabulate doesn't work inside \midaligned: ---- \def\T{% \starttabulate[|r|l|] \NC c \NC centered \NC \AR \NC l \NC left aligned \NC \AR \NC r \NC right aligned \NC \AR \stoptabulate } \starttext \T % This is OK \midaligned{\T} % This fails \stoptext ---- Why? - How to make it work? Best regards, Lukas -- Ing. Lukáš Procházka [mailto:LPr@pontex.cz] Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz] Bezová 1658 147 14 Praha 4 Tel: +420 244 062 238 Fax: +420 244 461 038

2 2

← Newer
1
2
3
4
5
6
7
...
20
Older →

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

ntg-context November 2012