- ntg-context - NTG Mailing Lists

TOC indenting
by David Arnold 18 Mar '05

18 Mar '05

All, In my table of contents, I have: \definecombinedlist [content][section,subsection] \setupcombinedlist [content] [alternative=c,aligntitle=yes,width=2.5em] How do I set up my TOC so that subsections are indented slightly more than sections in which they are contained?

2 2

How to switch between fonts?
by Stefan Wachter 18 Mar '05

18 Mar '05

Dear font experts! For some weeks I try very hard to generate minimal PDF documents using the PDF base 14 fonts. Now the following problem popped up: The Helvitica, Times, and Courier fonts have "8a" as their default encoding. Unfortunately, the 8a encoding is somewhat incomplete because it misses some characters (eg. the degree character). In TeX I use texnansi encoding because it offers most of the special characters that I need. If I use 8a encoding for the PDF document (in order to avoid reencoding) then the degree symbol is typeset by an embedded "txsy" font. The bad thing about this solution is that this degree character does not take care of \bf, \it, or \bi. Therefore the result is unsatisfactory. If I use texnansi encoding for the PDF document then the degree symbol is typeset nicely. The disadvantage of this option is that now the built-in fonts are always reencoding which make some additional 2kb for the PDF document. I would like to have the reeconded font to be used only if it is really necessary. Now I see two problems: 1. A particual problem in this situation Is it possible to define font synonymes locally (i.e. inside a group)? In that case I could map the virtual fonts that are base on 8a encoded raw fonts into virtual fonts that are based on texnansi reencoded raw fonts. I tried that but it seems that font synonymes are accepted only at the beginning. 2. A general problem Provided that I write a set of typescripts for defining a typeface similar to the postscript typefaces of ConTeXt but based on other (virtual) fonts: is it possible to switch between these two typefaces. The switch must respect the current font characteristics (i.e. \ss, \rm, \tt, \bf, \it, \bi, and size). Thanks for your attention, --Stefan

2 4

Problems with new beta
by Thomas A.Schmitz 18 Mar '05

18 Mar '05

Just installed the new beta. Now every run of texexec dies with lots of messages like this: kpathsea: Running mktexmf ec-lmcsc10 ! I can't find file `ec-lmcsc10'. <*> ...four; mag:=1; nonstopmode; input ec-lmcsc10 Please type another input file name ! Emergency stop. <*> ...four; mag:=1; nonstopmode; input ec-lmcsc10 Transcript written on mfput.log. grep: ec-lmcsc10.log: No such file or directory What gives? Thomas

3 4

hyphenation not working
by Paul Tremblay 18 Mar '05

18 Mar '05

I've noticed that hypenation is not working in my test ConTeXt documents. I have looked repeatedly at the manual and searched the wiki. It seems that hyphenations should be automatic? I am testing simple files with the language as English. Does one have to turn hyphenation on? Paul -- ************************ *Paul Tremblay * *phthenry(a)iglou.com * ************************

2 5

Palatino?
by Thomas A.Schmitz 18 Mar '05

18 Mar '05

Hi gang, I have a problem on my system with the Palatino font. In type-enc, it's mapped to \definefontsynonym [Palatino] [\typescriptthree-uplr8a] [encoding=\typescriptthree] However, on my system (Gerben Wierda's installation), there is no texnansi- or EC- or whatever-uplr8a. Palatino works flawlessly with LaTeX, mapped to pplr8t, and of course, it works with ConTeXt if I create the tfms myself with texfont, but I thought there was some default support for Palatino. Am I missing something? Best Thomas

9 34

Re: [NTG-context] Color separation
by Duncan Hothersall 18 Mar '05

18 Mar '05

>> 2. is there a way I can check that it is working properly without >> sending it to the printer each time? > > Acrobat has an overprint preview since v5; AFAIK Reader got it in v7. Yes... but it doesn't show up any problem. (Well, it just displays the same thing with overprint preview as without.) *But* in Acrobat Professional 7, doing a preflight check for CMYK+Spot output, it complains about overprint = off on all the text on tints. So I guess there is a problem in some way? This is why I am confused. Knowing what ConTeXt incantations *should* make it work would be a start, and then I can tell the printer that they have to fix it! :-) Duncan

2 1

footnote placement
by ishamid 18 Mar '05

18 Mar '05

Dear syndicate, 1. When I place footnotes as endnotes, they overflow the page, like an oversize \vbox. 2. E.g. \input tufte does not work from inside \footnote{} Here is a test file. Best Idris ==================test-notes=================== \setupoutput[pdftex] \setupfootnotes[location=text] \starttext \dorecurse{14} {\input tufte\footnote{Here is a footnote.\par Here is a footnote.\par Here is a footnote.} \par \input knuth\footnote{Here is a footnote.\par Here is a footnote.\par Here is a footnote.} \par} %\dorecurse{14} % THIS DOES NOT WORK!!! %{\input tufte\footnote{\input tufte} %\par %\input knuth\footnote{\input knuth} %\par} \section{notes} \placefootnotes[location=text,split=tolerant] % the split option does not help:-( \stoptext =============================================== ============================ Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

1 0

RE: Configuring 2 trees [was RE: [NTG-context] Times New Roman]
by ishamid 18 Mar '05

18 Mar '05

>===== Original Message From Hans Hagen <pragma(a)wxs.nl> ===== >ishamid wrote: > >> I'll do whatever it takes... > >the big mswincontext.zip Maybe it's too late, but is it possible to include the bulk of the omega distribution, the parts used by Gamma (basically everything except omega.exe). Looking forward to it Idris ============================ Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

1 0

Suppress numbering of figures
by David Arnold 17 Mar '05

17 Mar '05

All, I have: \placefigure [here][] {Mary Glenn}{\externalfigure[MaryGlenn3.jpg][width=0.5\makeupwidth]} I'd like the figure to float with the caption, but I don't want the Figure 1, Figure 2, etc. That is, I just want the caption under the figure. How can I modify to accomplish this?

2 2

special macro problem again...
by Peter Münster 17 Mar '05

17 Mar '05

Hello, with the help by Hans, I've got a nice little macro "\MyMacro". Now, I get another problem, when using "\doifmode" in the argument of this macro. This is the error message: ! Incomplete \iffalse And here the example file: \newcount\MyVersion \def\MyMacro#1{% \getgparameters[XXX][#1] \global\advance\MyVersion by 1 \bTR \expanded{\bTD \the\MyVersion \eTD} \expanded{\bTD \XXXDate \eTD}\eTR } \starttext \bTABLE \bTR \bTD Version \eTD \bTD Date \eTD \eTR \MyMacro{Date=1.2.2005} \MyMacro{Date=\doifmode{abc}{3.4.2005}} % this does not work \MyMacro{Date=5.6.2005} \eTABLE This works, but it is not so nice: \doifmodeelse{abc}{% \def\DateOne{1111}% \def\DateTwo{2222}% \def\DateThree{3333}}{% \def\DateOne{4444}% \def\DateTwo{5555}% \def\DateThree{6666}} \bTABLE \bTR \bTD Version \eTD \bTD Date \eTD \eTR \MyMacro{Date=\DateOne} \MyMacro{Date=\DateTwo} \MyMacro{Date=\DateThree} \eTABLE \stoptext Could you help please? Cheers, Peter -- http://pmrb.free.fr/contact/

2 3

Is there a bug in switching body fonts?
by Stefan Wachter 17 Mar '05

17 Mar '05

Hi all, I try to use two different postscript font families. The first family uses the Acrobat fonts without embedding and without reencoding whereas the second family uses the Acrobat fonts without embedding but with reencoding. For that means I wrote the typescript file below. When I use the first family only everything works fine. Similarly, if I use the second family only everything also works fine. Yet, if I try to switch the body font in a document I get the following error message: ! Font \nullfont has only 7 fontdimen parameters. <to be read again> \advance \dohighlow ...#2\textfont 2\else #3ex\fi \advance \scratchdimen #4ex \kern .... \dogotofixed ...c!color {#1\presetgoto }}}\else #1 \fi } \doifreferencefoundelse ...ce \ifreferencefound #2 \else #3\fi \egroup \dores... \gotobox ...2]} {\hbox {\unknownreference {#2}#1}} \referentieinfo {<}{#2}\eg... <argument> ...}[\s!fnt :t:\internalfootreference ] \rawreference \s!fnt {\s!f... ... l.27 {\ss Helvetica\par\ShowVariants } Can anyone help me with this problem? Best regards, --Stefan The test document ================= \enableregime[il1] \setupencoding[default=texnansi] \setupoutput[pdftex] \pdfoptionpdfminorversion 4 \usetypescriptfile[smallpdf.tex] \usetypescript[reencode][texnansi][texnansi] \usetypescript[postscript][texnansi] \usetypescript[builtInPostscript][texnansi] \setupbodyfont[postscript,sans,30pt] \mainlanguage[de] \setupheadertexts[] \def\Show{This is a test.\footnote{Fußnote.} 45\char176 \quotedblbase äöüßÄÖÜ\quotedblleft} \def\ShowVariants{\Show\par{\bf\Show}\par{\it\Show}\par{\bi\Show}\par} \starttext\pdfmapfile{+smallpdf.map} {\ss Helvetica\par\ShowVariants} {\rm Times-Roman\par\ShowVariants} {\tt Courier\par\ShowVariants} \switchtobodyfont[builtInPostscript] % causes error an error {\ss Helvetica\par\ShowVariants} % line 27 {\rm Times-Roman\par\ShowVariants} {\tt Courier\par\ShowVariants} \stoptext

1 0

Typescript for Times New Toman and Arial
by ishamid 17 Mar '05

17 Mar '05

Dear consortium, Below is a working typescript for times new roman and arial (I'm told that on mac the equivalent of arial is helvetica, so this may be os-specific;-<) This combination is required by Springer-Verlag in many of their books. I have to typeset an article for a Springer volume (their editor could not handle my transliteration accents) that will fit in seamlessly with the editors' preparation of the rest of the volume. When I am done, I will gladly contribute the resulting style so that others who need to prepare something for Springer will have something to go on. Maybe this could even be developed into a full m-spring.tex module. Anyway, here is the times new roman/arial typescript. Please make suggestions/improvements. Also, I'm not sure which math collection works best with tnr/arial. Best Idris PS. Yes, I did finally get tnr/arial working, though I've hosed my entire TeX/ConTeXt system in the process: in other words, victorious but wounded;-) =================type-tnr================ %Names \starttypescript [serif] [timesnewroman] [name] \setups[font:fallback:serif] \definefontsynonym[Serif] [TimesNewRoman] \definefontsynonym[SerifBold] [TimesNewRoman-Bold] \definefontsynonym[SerifItalic] [TimesNewRoman-Italic] \definefontsynonym[SerifBoldItalic][TimesNewRoman-BoldItalic] \stoptypescript \starttypescript [sans] [arial] [name] \setups[font:fallback:sans] \definefontsynonym[Sans] [Arial] \definefontsynonym[SansBold] [Arial-Bold] \definefontsynonym[SansItalic] [Arial-Italic] \definefontsynonym[SansBoldItalic][Arial-BoldItalic] \stoptypescript %Synonyms \starttypescript [serif] [timesnewroman] [texnansi] \definefontsynonym [TimesNewRoman] [\typescriptthree-Times] [encoding=\typescriptthree] \definefontsynonym [TimesNewRoman-Bold] [\typescriptthree-Timesbd] [encoding=\typescriptthree] \definefontsynonym [TimesNewRoman-Italic] [\typescriptthree-Timesi] [encoding=\typescriptthree] \definefontsynonym [TimesNewRoman-BoldItalic] [\typescriptthree-Timesbi] [encoding=\typescriptthree] \stoptypescript \starttypescript [sans] [arial] [texnansi] \definefontsynonym [Arial] [\typescriptthree-Arial] [encoding=\typescriptthree] \definefontsynonym [Arial-Bold] [\typescriptthree-Arialbd] [encoding=\typescriptthree] \definefontsynonym [Arial-Italic] [\typescriptthree-Ariali] [encoding=\typescriptthree] \definefontsynonym [Arial-BoldItalic] [\typescriptthree-Arialbi] [encoding=\typescriptthree] \stoptypescript % maps \starttypescript [map] [timesnewroman] [texnansi] \loadmapfile[texnansi-microsoft-timesnewroman.map] \stoptypescript \starttypescript [map] [arial] [texnansi] \loadmapfile[texnansi-microsoft-arial.map] \stoptypescript % typefaces \starttypescript [TimesNR] \definebodyfontenvironment [timesnr] [default] [interlinespace=2.8ex] \definetypeface [timesnr] [rm] [serif] [timesnewroman] [default] [encoding=texnansi] \definetypeface [timesnr] [ss] [sans] [arial] [default] [encoding=texnansi] \definetypeface [timesnr] [mm] [math] [palatino] [default] [encoding=texnansi] \definetypeface [timesnr] [tt] [mono] [modern] [default] [encoding=texnansi] \stoptypescript ========================================= Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

1 0

Re: [NTG-context] Color separation
by Duncan Hothersall 17 Mar '05

17 Mar '05

> whow, a demanding color user -) > > ... > > overprint=yes > > ... Aaaah. Thanks you so very much Hans. Of course, as ever, the answer is a single setting which solves all my problems. Off to add this gold to the wiki... Duncan

1 0

Color separation
by Duncan Hothersall 17 Mar '05

17 Mar '05

Sorry for all the messages; I am exploring things I don't really understand. I hope someone can enlighten me! With the following colour set-up: \setupcolors[rgb=no,cmyk=yes,spot=yes,state=start] \definecolor[PantoneTwoNineFour][c=1,m=.56,y=0,k=.18] \definecolor[IFSbluetabletint][PantoneTwoNineFour][p=.15] and then using this tint as a textbackground and also as a backgroundcolor in frames, I am getting complaints from my printers that black overprinted on the tint is 'knocking out' the tint and leaving white on the separated plate. I have read and re-read the useful msplit.pdf which suggests that the implicit criterium=all will negate this effect, but perhaps I have misunderstood? Two questions: 1. how can I stop black overprinting from knocking out the tint, and 2. is there a way I can check that it is working properly without sending it to the printer each time? Thanks as ever for any help. Do I need to post example output? Duncan

4 3

RE: Configuring 2 trees [was RE: [NTG-context] Times New Roman]
by ishamid 17 Mar '05

17 Mar '05

Hi, Hans >===== Original Message From Hans Hagen <pragma(a)wxs.nl> ===== >i'll upload a new minimal (beware, tex live 2005 binaries), as well as the big >windows zip (will take a few hours) 1. Remember that I need both aleph and pdfetex formats; can you do that? 2. After you upload, please:-) tell me exactly what I need to get things working. I only have high-speed access at my office (rather far from here) and will head there as soon as you have uploaded things. I only downloaded the minimal mswintex.zip; should I get the big one? Should I upgrade to the latest fpTeX/TeXLive as well? If so, let me know which depository you use so that I don't get the wrong one (yes, I'm paranoid->) I'll do whatever it takes... And as always, Thnx!!! Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

2 2

sane accents [was RE: [NTG-context] m-bib issues]
by ishamid 17 Mar '05

17 Mar '05

Dear fellow conspirators, Is there a saner way to define the following accent using ConTeXt's framework: \def\SHIFT#1{\dimen0=.00#1ex \multiply\dimen0 by\fontdimen1\font \kern-.0156\dimen0} % compensate for slant/italic in lower accents \def\h#1{{\oalign{\relax#1\crcr\hidewidth\SHIFT{34}% \vbox to.2ex{\hbox{\char'25}\vss}\hidewidth}}} \def\~#1{{\struttedbox{\accent"7E #1}}} In my own work, the tilda is used over (upper and lower case) `h', `t', and `i', and the lower crescent is only used under (upper and lower case) `h'. lmr does not have the latter case and I still have a couple of issues with lmr so I'd like to maintain control over a few accents for now. Best Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

2 1

RE: [NTG-context] automating initialization
by ishamid 17 Mar '05

17 Mar '05

>===== Original Message From Hans Hagen <pragma(a)wxs.nl> ===== >ishamid wrote: >> Dear gang, >> >> How do I automate initialization of the separate context tree (from >> mswintex.zip)? A simple batch file such as >> >> ======================================== >> setuptex c:\context >> texexec foo >> ======================================== >> >> does not work; the batch file always turns itself off before texexec can be >> invoked. Can I make the initialization global so that all batch files (such as >> those called by WinEDT) will work properly? I added c:\context to the path but >> that is not enough. >> >> BTW: Can initialization be turned off as well? > >you can associate batch files to a cmd window, (open action); can you give me an example? >in winedt you >shoul dadd the lines to their bat files (or ask the author to provide an >initialization option) Well, the following seems to work for now: ======================================== call setuptex c:\context texexec foo ======================================== I am pretty ignorant of DOS but <call> seems to solve the problem for now. Now my WinEDT batch files for pdfetex and aleph can work. Best Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

2 1

\doprepareidentity
by Peter Münster 17 Mar '05

17 Mar '05

Hello, in order to get correct output of pdfinfo, I need to redefine \doprepareidentity : \let\doprepareidentity\relax % try with and without this line \setupoutput[pdf] \enableregime[il1] \setupinteraction[state=start,author=ä,title=ä,subtitle=ä,keyword=ä] \starttext test \stoptext Cheers, Peter -- http://pmrb.free.fr/contact/

2 2

RE: [NTG-context] m-bib issues
by ishamid 17 Mar '05

17 Mar '05

>===== Original Message From Taco Hoekwater <taco(a)elvenkind.com> ===== >> The \startpublication[a= ] option seems to cause m-bib to choke on some >> accents. Here is an example: > >It might be a font thing, because my Context does not complain and >typesets the \~\i correctly. Rather, its almost certainly a macro thing, because I've had to redefine/create some accents for transliteration, etc. See below. Anyway, these accents work fine outside of the \startpublication[a= ] option. >A log file and/or texexec --version >information is needed. Silly me, I was half-sleep when I sent that. Try this: ===================test-bib.tex=================== \setupoutput[pdftex] \usemodule[bib] \def\SHIFT#1{\dimen0=.00#1ex \multiply\dimen0 by\fontdimen1\font \kern-.0156\dimen0} % compensate for slant/italic in lower accents \def\h#1{{\oalign{\relax#1\crcr\hidewidth\SHIFT{34}% \vbox to.2ex{\hbox{\char'25}\vss}\hidewidth}}} \def\~#1{{\struttedbox{\accent"7E #1}}} \def\AHSAI{A\d hs\=a'\~\i} %\def\AHSAI{A\d hs\=a'\i} \def\KHAWARIZMI{\h Haw\=arizm\=i} %\def\KHAWARIZMI{Khaw\=arizm\=i} \KHAWARIZMI{} (from whom we get `algorithm') \input test-bib.bbl \starttext \cite[ahsaif] \cite[ahsaijk] \cite[khawarizmi] \AHSAI \KHAWARIZMI \stoptext =================================================== ==================test-bib.bbl===================== \startpublication[k=ahsaif, t=book, a=\AHSAI, y=1856, s=\AHSAI1856] %\author[\v Say\h h]{A\.hmad Ibn Zayni \Al-D\={i}n}[A.]{}{\Ah} \author[\v Say\h h]{A\.hmad Ibn Zayni \Al-D\={i}n}[A.]{}{\Ah} \title{\v Sar\.hu \~al-Faw\={a}\'id} \pubname{n.p.} \city{Tabriz} \pubyear{1856} \stoppublication \startpublication[k=ahsaijk, t=book, a=\AHSAI, y=1856--59, s=\AHSAI1856--59] \author[\v Say\h h]{A\.hmad Ibn Zayni \Al-D\={i}n}[A.]{}{\Ah} \title{Jaw\={a}mi\`u \~al-Kalim} \pubname{n.p.} \note{Two volumes} \city{Tabriz} \pubyear{1856--59} \stoppublication \startpublication[k=khawarizmi, t=book, a=\KHAWARIZMI, y=1856, s=\KHAWARIZMI1856] %\author[\v Say\h h]{A\.hmad Ibn Zayni \Al-D\={i}n}[A.]{}{\Ah} \author[\v Say\h h]{A\.hmad Ibn Zayni \Al-D\={i}n}[A.]{}{\Ah} \title{\v Sar\.hu \~al-Faw\={a}\'id} \pubname{n.p.} \city{Tabriz} \pubyear{1856} \stoppublication =================================================== ======================log========================== This is pdfeTeX, Version 3.141592-1.20a-2.2 (Web2c 7.5.3) (format=cont-en 2005.3.16) 17 MAR 2005 08:33 entering extended mode \write18 enabled. (c:\CONTEXT\texmf-local/web2c/natural.tcx) **&cont-en test-bib.tex (./test-bib.tex ConTeXt ver: 2005.01.31 fmt: 2005.3.16 int: english mes: english language : language en is active <protectionstate 0> system : cont-new loaded (c:\CONTEXT\texmf-local/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex! color : palette rollover is available system (E-TEX) : [line 878] system (E-TEX) : [line 933] ) system : cont-old loaded (c:\CONTEXT\texmf-local/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (c:\CONTEXT\texmf-local/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (c:\CONTEXT\texmf-local/tex/context/user/cont-sys.tex (c:\CONTEXT\texmf-local/tex/context/base/type-syn.tex) (c:\CONTEXT\texmf-local/tex/context/base/type-enc.tex) (c:\CONTEXT\texmf-local/tex/context/base/type-dis.tex) (c:\CONTEXT\texmf-local/tex/context/base/type-siz.tex) (c:\CONTEXT\texmf-local/tex/context/base/type-map.tex) (c:\CONTEXT\texmf-local/tex/context/base/type-spe.tex) (c:\CONTEXT\texmf-local/tex/context/base/type-exa.tex) (c:\CONTEXT\texmf-local/tex/context/base/type-akb.tex)) bodyfont : 12pt rm is loaded language : patterns en->default:default->1->2:2 uk->default:default->2-> 2:2 de->texnansi:texnansi->3->2:2 de->ec:ec->4->2:2 fr->texnansi:texnansi->5->2 :2 fr->ec:ec->6->2:2 es->default:default->7->2:2 it->texnansi:texnansi->8->2:2 it->ec:ec->9->2:2 nl->texnansi:texnansi->10->2:2 nl->ec:ec->11->2:2 loaded specials : tex,postscript,rokicki loaded \openout2 = `test-bib.tui'. system : test-bib.top loaded (./test-bib.top) \openout0 = `test-bib-mpgraph.mp'. \openout0 = `mpgraph.mp'. specials : loading definition file tpd (c:\CONTEXT\texmf-local/tex/context/base/spec-tpd.tex specials : loading definition file fdf (c:\CONTEXT\texmf-local/tex/context/base/spec-fdf.tex <unprotect 3> system (E-TEX) : [line 2280] \ifcsname <protect 3>) specials : fdf loaded ) specials : fdf,tpd loaded system : macros of module bib loaded (c:\CONTEXT\texmf-local/tex/context/bib/t-bib.tex system : macros of module bibltx loaded (c:\CONTEXT\texmf-local/tex/context/bib/t-bibltx.tex) publications : loading formatting style from bibl-apa (c:\CONTEXT\texmf-local/tex/context/bib/bibl-apa.tex)) (./test-bib.bbl) (./test-bib.tuo) (./test-bib.tuo) (./test-bib.tuo) (./test-bib.tuo) (./test-bib.tuo) (./test-bib.tuo) (./test-bib.tuo) (./test-bib.tuo) (./test-bib.tuo) (./test-bib.tuo) (./test-bib.tuo) (./test-bib.tuo) (./test-bib.tuo) fonts : using map file: texnansi-public-lm.map fonts : using map file: original-public-vnr.map fonts : using map file: original-public-csr.map fonts : using map file: original-public-plr.map fonts : using map file: original-public-lm.map fonts : using map file: original-ams-euler.map fonts : using map file: original-ams-cmr.map fonts : using map file: texnansi-base.map fonts : using map file: t5-base.map fonts : using map file: qx-base.map fonts : using map file: 8r-base.map fonts : using map file: ec-base.map fonts : using map file: ec-public-lm.map fonts : using map file: original-base.map publications : loading database from test-bib.bbl (./test-bib.bbl) systems : begin file test-bib at line 23 ! Undefined control sequence. \dowithnextbox #1->\long \def \dodowithnextbox {#1}\afterassignment \dododow... \struttedbox ...trutheight \flushnextbox \egroup } \normalhbox \~#1->{\struttedbox {\accent "7E #1}} \getcommacommandsize [#1]->\edef \commacommand {#1 }\scratchtoks \expandafter... \dobibauthoryear ...acommandsize [\thebibauthors ] \@EA \processcommalist \@E... \bibauthoryearsref ...rnative \c!inbetween {\YR }} \bibalternative \v!right ... l.26 ? ! Undefined control sequence. \dododowithnextbox ->\aftergroup \dodowithnextbox \dowithnextbox ...erassignment \dododowithnextbox \setbox \nextbox \struttedbox ...trutheight \flushnextbox \egroup } \normalhbox \~#1->{\struttedbox {\accent "7E #1}} \getcommacommandsize [#1]->\edef \commacommand {#1 }\scratchtoks \expandafter... \dobibauthoryear ...acommandsize [\thebibauthors ] \@EA \processcommalist \@E... ... l.26 ? ! Undefined control sequence. \dowithnextbox #1->\long \def \dodowithnextbox {#1}\afterassignment \dododow... \struttedbox ...trutheight \flushnextbox \egroup } \normalhbox \~#1->{\struttedbox {\accent "7E #1}} \getcommacommandsize [#1]->\edef \commacommand {#1 }\scratchtoks \expandafter... \dobibauthoryear ...acommandsize [\thebibauthors ] \@EA \processcommalist \@E... \bibauthoryearsref ...rnative \c!inbetween {\YR }} \bibalternative \v!right ... l.28 ? ! Undefined control sequence. \dododowithnextbox ->\aftergroup \dodowithnextbox \dowithnextbox ...erassignment \dododowithnextbox \setbox \nextbox \struttedbox ...trutheight \flushnextbox \egroup } \normalhbox \~#1->{\struttedbox {\accent "7E #1}} \getcommacommandsize [#1]->\edef \commacommand {#1 }\scratchtoks \expandafter... \dobibauthoryear ...acommandsize [\thebibauthors ] \@EA \processcommalist \@E... ... l.28 ? ! Illegal parameter number in definition of \commacommand. <to be read again> \crcr \oalign ...z@skip \lineskip .25ex\ialign {##\crcr #1\crcr }} \h ...x to.2ex{\hbox {\char '25}\vss }\hidewidth } } \KHAWARIZMI ->\h H aw\=arizm\=i \getcommacommandsize [#1]->\edef \commacommand {#1 }\scratchtoks \expandafter... \ixbibauthoryear ...acommandsize [\thebibauthors ] \xdef \theauthorssize {\co... ... l.30 ? ! Illegal parameter number in definition of \commacommand. <to be read again> \crcr \oalign ...z@skip \lineskip .25ex\ialign {##\crcr #1\crcr }} \h ...x to.2ex{\hbox {\char '25}\vss }\hidewidth } } \KHAWARIZMI ->\h H aw\=arizm\=i \getcommacommandsize [#1]->\edef \commacommand {#1 }\scratchtoks \expandafter... \dobibauthoryear ...acommandsize [\thebibauthors ] \@EA \processcommalist \@E... ... l.30 ? [1.1{c:\CONTEXT\texmf-local/fonts/map/pdftex/context/original-empty.map}{c:\CO N TEXT\texmf-local/fonts/map/pdftex/context/texnansi-public-lm.map}{c:\CONTEXT\t e xmf-local/fonts/map/pdftex/context/original-public-vnr.map}{c:\CONTEXT\texmf-l o cal/fonts/map/pdftex/context/original-public-csr.map}{c:\CONTEXT\texmf-local/f o nts/map/pdftex/context/original-public-plr.map}{c:\CONTEXT\texmf-local/fonts/m a p/pdftex/context/original-public-lm.map}{c:\CONTEXT\texmf-local/fonts/map/pdft e x/context/original-ams-euler.map}{c:\CONTEXT\texmf-local/fonts/map/pdftex/cont e xt/original-ams-cmr.map}{c:\CONTEXT\texmf-local/fonts/map/pdftex/context/texna n si-base.map}{c:\CONTEXT\texmf-local/fonts/map/pdftex/context/t5-base.map}{c:\C O NTEXT\texmf-local/fonts/map/pdftex/context/qx-base.map}{c:\CONTEXT\texmf-local / fonts/map/pdftex/context/8r-base.map}{c:\CONTEXT\texmf-local/fonts/map/pdftex/ c ontext/ec-base.map}{c:\CONTEXT\texmf-local/fonts/map/pdftex/context/ec-public- l m.map}{c:\CONTEXT\texmf-local/fonts/map/pdftex/context/original-base.map}] systems : end file test-bib at line 35 ) Here is how much of TeX's memory you used: 1649 strings out of 162969 25978 string characters out of 664882 2494205 words of memory out of 3536160 36350 multiletter control sequences out of 10000+50000 10284 words of font info for 34 fonts, out of 1000000 for 2000 104 hyphenation exceptions out of 1000 44i,17n,49p,220b,364s stack positions out of 5000i,500n,5000p,200000b,40000s 7 PDF objects out of 300000 0 named destinations out of 131072 1 words of extra memory for PDF output out of 65536 <c:\CONTEXT\texmf/fonts/type1/bluesky/cm/cmr12.pfb> Output written on test-bib.pdf (1 page, 9141 bytes). =================================================== Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

2 1

RE: Configuring 2 trees [was RE: [NTG-context] Times New Roman]
by ishamid 17 Mar '05

17 Mar '05

>===== Original Message From Hans Hagen <pragma(a)wxs.nl> ===== >ishamid wrote: > >> I really wish that updating/upgrading were not always such a pain... > >normally it isn't but currently there are three issues that make it painfull: > >- incompatible changes in the tds (enc/map paths) >- changes in pdftex (no config, better map support) >- the transition to latin modern >- (unnoticed) changes in pattern file names >- the usual changes in fonts I played around for quite some time with the texmf.cnf environment variables in both \TeXLive and \ConTeXt trees. I noticed that even when I got \TeXLive to search \ConTeXt first, upon compiling it still could not find certain files (a tds issue?), while I could never get \ConTeXt to search \TeXLive properly. This was not helped by the fact that my July04 fpTeX comes with a corrupt kpathsea.pdf documentation using type3 fonts! Yesterday was not my day... Best Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

1 0

automating initialization
by ishamid 17 Mar '05

17 Mar '05

Dear gang, How do I automate initialization of the separate context tree (from mswintex.zip)? A simple batch file such as ======================================== setuptex c:\context texexec foo ======================================== does not work; the batch file always turns itself off before texexec can be invoked. Can I make the initialization global so that all batch files (such as those called by WinEDT) will work properly? I added c:\context to the path but that is not enough. BTW: Can initialization be turned off as well? Best Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

3 2

Re: [NTG-context] imposition for a pdf file
by Ciro A. Soto 17 Mar '05

17 Mar '05

Thank you Luigi, but where is the pdf file input in your instructions? remember, i don't have the tex file, only the pdf file. ciro --- "luigi.scarso" <luigi.scarso(a)logosrl.it> wrote: --------------------------------- Ciro A. Soto wrote: I have a pdf file with 660 letter-size pages.I would like to save toner in my printer byprinting 2 or 4 pages in one single sheet of paper.Is it possible to do this with context?or any other alternative?Remember, I don't have the source file, only the pdffile.thank youCiro_______________________________________________ntg-context mailing listntg-context@ntg.nlhttp://www.ntg.nl/mailman/listinfo/ntg-context As usually, not a direct answer... Play with these script %% %% save it as test.tex %% \setupcolors[state=start] \starttext \dorecurse{660}% {\startTEXpage[width=3cm,height=2cm] \vbox to \vsize{\vss \hbox to\hsize{\hss\framed[width=2cm,align={middle,lohi},background=color,backgroundcolor=green]{p.\tfd\recurselevel}\hss}\vss} \stopTEXpage} \stoptext %% %% save as my-imp.tex %% %% \setuplayout here \starttext \centerline{% \externalfigure[test][page=1] \externalfigure[test][page=3] \externalfigure[test][page=5] \externalfigure[test][page=7] \externalfigure[test][page=9] \externalfigure[test][page=11] } \blank[1cm] \centerline{% \externalfigure[test][page=2] \externalfigure[test][page=4] \externalfigure[test][page=6] \externalfigure[test][page=8] \externalfigure[test][page=10] \externalfigure[test][page=12] } \stoptext (you can create my-imp.tex by a script and choosing theappropriate number for page=...., also use \setuplayoutetc..) Also look for \setuparranging. luigi > _______________________________________________ > ntg-context mailing list > ntg-context(a)ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context >

3 5

empty lines at the top of the columns
by sjoerd siebinga 17 Mar '05

17 Mar '05

I have a problem with empty lines at the top of my columns. My text is subdivided into dictionary articles (called lemmata) which are separated by an empty line. However, when dictionary article ends at the last line the following column begins with an empty line, which is very ugly. Does anyone know how I can solve this problem. My columndefinition is \startcolumns[n=2,rule=off,balance=yes,blank={fixed,small}] and I defined the dictionary article enviromnent as follows: \definestartstop[lemma][ before={}, % after={\crlf}]% thanks, Sjoerd

2 1

m-bib issues
by ishamid 17 Mar '05

17 Mar '05

Dear knights of the round table, I've been using a very old bib module up to now, with lots of personal tweaks, workarounds etc. (mission-critical issues--no time 2 deal with painful upgrades); now I'm starting fresh with the latest. Here is one issue: The \startpublication[a= ] option seems to cause m-bib to choke on some accents. Here is an example: ============test-bib.bbl=============== \startpublication[k=ahsaif, t=book, a=\AHSAI, y=1856, s=\AHSAI1856] %\author[\v Say\h h]{A\.hmad Ibn Zayni \Al-D\={i}n}[A.]{}{\Ah} \author[\v Say\h h]{A\.hmad Ibn Zayni \Al-D\={i}n}[A.]{}{\Ah} \title{\v Sar\.hu \~al-Faw\={a}\'id} \pubname{n.p.} \city{Tabriz} \pubyear{1856} \stoppublication \startpublication[k=ahsaijk, t=book, a=\AHSAI, y=1856--59, s=\AHSAI1856--59] \author[\v Say\h h]{A\.hmad Ibn Zayni \Al-D\={i}n}[A.]{}{\Ah} \title{Jaw\={a}mi\`u \~al-Kalim} \pubname{n.p.} \note{Two volumes} \city{Tabriz} \pubyear{1856--59} \stoppublication ======================================= and here is the accompanying tex file ============test-bib.tex=============== \setupoutput[pdftex] \usemodule[bib] \def\AHSAI{A\d hs\=a'\~\i} %\def\AHSAI{A\d hs\=a'i} \input test-bib.bbl \starttext \cite[ahsaif] \cite[ahsaijk] \stoptext ======================================= In this example the \startpublication[a= ] option chokes on \~. Any help/chivalry will be appreciated! Best Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

2 1

Euro-sign
by Johannes Werner 17 Mar '05

17 Mar '05

Hello, what i have to do, to get the euro into my document? Is there any documentation ? (surely i'm not the first with this question, but i cannot find something) I tried "\euro", but nothing happened. mfg, Johannes Werner

6 7

Upgrading...
by ishamid 17 Mar '05

17 Mar '05

Dear syndicate, While I have not closely kept up with all developments it seems that installation/upgrade procedures have been improved. I also went through a lot of pain the last time I upgraded so I ask: Given that: 1. I have not updated my context since Aug. of last year; 2. my fpTeX is from last July. What is the wisest and most efficient way to upgrade my ConTeXt distribution today? Should I replace fpTeX (including Aleph) with the ConTeXt/TeX distribution from the website? Are there any Aleph-related issues? Any tips will be appreciated Thanks Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

5 4

Re: [NTG-context] textbackground
by Duncan Hothersall 17 Mar '05

17 Mar '05

Resurrecting a thread from June last year... (sorry!) On 26-jun-04 Hans van der Meer identified a bug/issue with text backgrounds: >>> When the textbackground falls at a page crossing -- i.e. starts at >>> the top of a page -- the coloring extends backwards on the page just >>> left. On 29-jun-04 Hans H tantalisingly said: >i think i found a way out and will send you a test file > >Hans As far as I can tell, I'm currently experiencing the same thing. I'm wondering what was in the test file ;-) Thanks! Duncan

1 0

pdfopen/pdfclose under Linux
by Taco Hoekwater 17 Mar '05

17 Mar '05

Hi all, I've just uploaded a beta version of Fabrice Popineau's pdfclose/ pdfopen tools ported to X11 (Linux). I've tested this with Acrobat Reader 5.0.10 & Linux & X.org, but the code is reasonably generic, I believe. I hope that while waiting for the upcoming direct texexec support, somebody is willing to do testing under other AR/Os/X configurations. You can fetch it from: http://tex.aanhet.net/utils/pdfopen-0.2.tar.gz (Mandrake 10.1/i386 binaries are included) From the README: --------------------------------------------------------------- Both commands have only one meaningful argument: pdfclose --file <pdfname> Closes an existing window with the name <pdfname> pdfopen --file <pdfname> Opens a window with the name <pdfname> (starting a reader if necesary), or it reloads <pdfname> if it was already open. Note: <pdfname> is the name of the X window, not a filename. ---------------------------------------------------------------- Greetings, Taco

3 3

Re: [NTG-context] Header background won't go away
by Duncan Hothersall 17 Mar '05

17 Mar '05

Hans wrote: > you can do a stepwise page change: > > \setuphead[part][page={yes,blank,right}] > \setuphead[chapter][header=high,page={yes,blank,right}] > > also, in order to let backgrounds adapt to each page, say: > > \setupbackgrounds[state=repeat] > > otherwise only text|page backgrounds will be calculated each page and the other > ones when backgrounds are set/changed (otherwise too slow) > > Hans > > (some day i'll make this nicer) Thanks Hans, fixes problem 2, but 1 remains. So this is maybe a bug? This is my test file now: -- \setuppagenumbering[alternative=doublesided] \setuplayout[location=doublesided, backspace=8.5pc,topspace=5.5pc,top=0pt,topdistance=0pt, header=12pt,headerdistance=12pt,height=61pc,footer=16pt, bottom=6pc,leftedge=9pc,leftedgedistance=0pt,leftmargin=0pt, leftmargindistance=0pt,width=29pc,rightmargindistance=0pt, rightmargin=6.5pc,rightedgedistance=0pt,rightedge=6.5pc] \setuphead[part] [placehead=yes,resetnumber=no,page={yes,blank,right}, header=high,before=,after=] \def\XPart#1#2{#1 #2} %simplified \setuphead[chapter] [header=high,page={yes,blank,right}, before=\vbox to 14pc\bgroup,after=\vss\egroup] \def\XChapter#1#2{#1 #2} %simplified %... \setupcolors[rgb=no,cmyk=no,spot=yes,state=start] \definecolor[PantoneTwoNineFour][c=1,m=.56,y=0,k=.18] \definecolor[IFSblueheadertint][PantoneTwoNineFour][p=.12] %... \setupbackgrounds[header] [leftedge,leftmargin,text,rightmargin,rightedge] [background=color,backgroundcolor=IFSblueheadertint,state=start] \setupheader[state=start] \setupheadertexts[margin] [] [\hfill\llap{\tfx\getmarking[chapter][current]}] [\hbox to \leftmarginwidth{\rlap{\tfx\getmarking[section][last]\hfil}}] [] %... \starttext \startbodymatter \part{First part} Looks good, and no band on next page either! \chapter{First chapter} Looks good, no band on first page of chapter. \page[yes] \section{First section} Looks good, the band is there. \page[yes] \section{Second section} Looks good, the band is still there. \chapter{Second chapter} Ugh, the band has impinged on my title again. \stopbodymatter \stoptext -- Thanks, Duncan

2 2

RE: [NTG-context] Times New Roman
by ishamid 17 Mar '05

17 Mar '05

>===== Original Message From Adam Lindsay <atl(a)comp.lancs.ac.uk> ===== >I hope you can translate from unix-like pseudo-commands into DOS: > >make a new, clean temp directory. >copy times*.ttf into that directory. >from that directory, run: > > texfont --ma --in --ve=microsoft --co=timesnewroman --show > >What happens? Ok, much progress:-) 1. Your command worked as is, no need to translate:-)) 2. TeXFont did its magic, with no *apparent* errors (but see below) : a. ttf|afm|tfm|vf's are copied to/generated within [truetype|afm|tfm|vf]\microsoft\timesnewroman; b. texnansi-microsoft-timesnewroman.map generated in \map\pdftex\context c. texnansi-microsoft-timesnewroman.tex created in temp dir. 3. Problem: upon compiling texnansi-microsoft-timesnewroman.tex. I get =================================================== TeXExec 5.0 - ConTeXt / PRAGMA ADE 1997-2004 executable : pdfetex format : cont-en inputfile : texnansi-microsoft-timesnewroman output : pdftex interface : en options : once current mode : none This is pdfeTeXk, Version 3.141592-1.11b-2.1 (Web2c 7.5.2) %&-line parsing enabled. (c:/TeXLive/texmf/web2c/cp8bit.tcx) : : Warning: pdfetex.exe (file texnansi-raw-Timesi): Font texnansi-raw-Timesi at 60 0 not found Warning: pdfetex.exe (file texnansi-raw-Timesbi): Font texnansi-raw-Timesbi at 600 not found Warning: pdfetex.exe (file texnansi-raw-Timesbd): Font texnansi-raw-Timesbd at 600 not found <c:/TeXLive/texmf/fonts/type1/bluesky/cm/cmr6.pfb> Warning: pdfetex.exe (file texnansi-raw-Times): Font texnansi-raw-Times at 600 not found <c:/TeXLive/texmf/fonts/type1/bluesky/cm/cmtt10.pfb> Output written on texnansi-microsoft-timesnewroman.pdf (28 pages, 379871 bytes) =================================================== a. Note the warnings; b. Adobe complains about an error in opening the page (I'm sending you the pdf directly) 4. Question: how can I make TeXFont default to C:\ConTeXt\texmf-local instead of C:\TeXLive\texmf-local? I think I'm close to the finish line. Thnx 4 all your help! Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

2 1

imposition for a pdf file
by Ciro A. Soto 17 Mar '05

17 Mar '05

I have a pdf file with 660 letter-size pages. I would like to save toner in my printer by printing 2 or 4 pages in one single sheet of paper. Is it possible to do this with context? or any other alternative? Remember, I don't have the source file, only the pdf file. thank you Ciro

5 4

XeTeX w. ConTeXt question
by sfpno 17 Mar '05

17 Mar '05

Greetings, After a number of attempts (somewhat indistinguishable in my memory at this point) I've been able to run ConTeXt with XeTeX support (if that's the right nomenclature;). It works! But I do receive this error message: -- (/usr/local/TeTeX/share/texmf.tetex/tex/context/base/spec-tpd.tex systems : you should use pdfTeX binaries \wait= ) -- Looking in spec-tpd.tex, this error message comes from pdftexversion being undefined. Could someone clarify this for me? Kind regards

3 4

Re: [NTG-context] imposition for a pdf file
by Ciro A. Soto 17 Mar '05

17 Mar '05

I tried Hans' approach. It works fine, but somehow the pdf file with the 2*2 pages is corrupted since it does not print well, mostly garbage. It looks good on screen though. I printed one page of the original pdf and it is fine. So the problem happens in the imposition step. any suggestion? thank you ciro --- Hans Hagen <pragma(a)wxs.nl> wrote: > luigi.scarso wrote: > > Sorry ciro, but i like write tex code. > > > > 1. save following code as test.tex > > in page-imp are some additional inclusion macros -) > > > \centerline{% > > \externalfigure[test][page=1] > > \externalfigure[test][page=3] > > \externalfigure[test][page=5] > > \externalfigure[test][page=7] > > \externalfigure[test][page=9] > > \externalfigure[test][page=11] > > } > > shorter > > \centerline > {\dostepwiserecurse{1}{11}{2} > > {\expanded{\externalfigure[test][page=\recurselevel]}}} > > Hans > > ----------------------------------------------------------------- > Hans > Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | > The Netherlands > tel: 038 477 53 69 | fax: 038 477 53 74 | > www.pragma-ade.com > | > www.pragma-pod.nl > ----------------------------------------------------------------- > >

2 1

Header background won't go away
by Duncan Hothersall 16 Mar '05

16 Mar '05

Hi all. I have a book with parts and chapters, which wants a tint in the background of the header line. I have the following set-up producing almost what I want (apologies for the length but I've stripped out as much as I can to still show the same effect): -- \setupsectionblock[bodypart][page=right] %... \setuppagenumbering[alternative=doublesided] \setuplayout[location=doublesided, backspace=8.5pc,topspace=5.5pc,top=0pt,topdistance=0pt, header=12pt,headerdistance=12pt,height=61pc,footer=16pt, bottom=6pc,leftedge=9pc,leftedgedistance=0pt,leftmargin=0pt, leftmargindistance=0pt,width=29pc,rightmargindistance=0pt, rightmargin=6.5pc,rightedgedistance=0pt,rightedge=6.5pc] \setuphead[part] [placehead=yes,command=\XPart,resetnumber=no,page=right, header=high,before=,after=] \def\XPart#1#2{#1 #2} %simplified \setuphead[chapter] [command=\XChapter,header=high, before=\vbox to 14pc\bgroup,after=\vss\egroup] \def\XChapter#1#2{#1 #2} %simplified %... \setupcolors[rgb=no,cmyk=no,spot=yes,state=start] \definecolor[PantoneTwoNineFour][c=1,m=.56,y=0,k=.18] \definecolor[IFSblueheadertint][PantoneTwoNineFour][p=.12] %... \setupbackgrounds[header] [leftedge,leftmargin,text,rightmargin,rightedge] [background=color,backgroundcolor=IFSblueheadertint,state=start] \setupheader[state=start] \setupheadertexts[margin] [] [\hfill\llap{\tfx\getmarking[chapter][current]}] [\hbox to \leftmarginwidth{\rlap{\tfx\getmarking[section][last]\hfil}}] [] %... \starttext \startbodymatter \part{First part} Looks good, but still has band on next page \chapter{First chapter} Looks good, no band on first page of chapter. \page[yes] \section{First section} Looks good, the band is there. \page[yes] \section{Second section} Looks good, the band is still there. \chapter{Second chapter} Ugh, the band has impinged on my title, and I'm getting an extra odd page at the end too. \stopbodymatter \stoptext -- The above code runs in live.contextgarden.net and demonstrates my problems, which are: 1. The big problem - the second chapter title page doesn't suppress the band, even though the first one did. NB this behaviour seems to change depending on whether the previous chapter ends on an odd or even page. Bug, or incorrect header setup? 2. Empty pages (like the back of the part title) have the colour band on them - how can this be suppressed for empty pages? 3. There's an extra odd page at the end (I've tried a few of the suggested fixes for this but can't get them to work). If anyone can answer, especially question 1, I'd be really grateful! Thanks, Duncan dh(a)capdm.com

2 1

Floating table caption extends textwidth
by Michael Fuchs 16 Mar '05

16 Mar '05

Hi! I have problems creating a "multi-line" caption for a floating table. If the caption is too long it will extend the text width. The following example shows this problem on http://live.contextgarden.net/. I was able to find out, that this problem only appears if one of the variables "width" or "textwidth" in the "setuplayout" command were used to define the textwidth. Regards Michael EXAMPLE: -------------------------------------------- \setuplayout[ backspace=25mm, topspace=10mm, header=10mm, headerdistance=5mm, width=16cm, % <-- COMMENT THIS TO SEE THE EX WORK height=fit,footer=10mm, footerdistance=5mm, bottom=5mm] \starttext \placetable[here][tab:Referenz] {Zusammenfassung der Ereigniszahlen in Signal und Untergrund mit... erfülltem $z$-Cut und einem über den Massenschnitt identifizierten $\pi^0$. \nolist{Ereignisse werden in dem durch den $2 \sigma$-Massenschnitt vorgegebenen Intervall gezählt, das auch bei den endgültigen Schnitten zu Selektion verwendet wird.} } { \setupTABLE[x][1][width=4cm, align=middle] \setupTABLE[x][2,3,4,5][width=3cm, align=middle] \bTABLE \bTR \bTH Anzahl \eTH \bTH Daten \eTH \bTH MC \eTH \bTH Daten \eTH \bTH MC \eTH \eTR \eTABLE } \stoptext

1 0

RE: [NTG-context] Times New Roman
by ishamid 16 Mar '05

16 Mar '05

>===== Original Message From "Thomas A.Schmitz" <thomas.schmitz(a)uni-bonn.de> ===== >hmm, I have zero experience with Windows and wouldn't get near a >computer running Windows if you payed me for it, I certainly agree with this sentiment, and will make yet another attempt to switch to Linux this year; kde3.4 is looking nice... >but I guess there must >be a central configuration file somewhere. On linux and unix systems, >it's called texmf.cnf. It's the same here; I'll look into it. There may be some os-related syntax issues, though, since kpsewhich -var-value TEXMFLOCAL gives kpsewhich: unrecognized option `-var-value' But I'll keep working/learning. Thnx! Idris That's where you define which tex-trees you have >and in what order they should be searched. So if you want to have your >new C/Context searched first, your C/Texlive second, one of them should >be set as TEXMFLOCAL, the other as TEXMFMAIN. What does > Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

1 0

RE: [NTG-context] Times New Roman
by ishamid 16 Mar '05

16 Mar '05

>===== Original Message From "Thomas A.Schmitz" <thomas.schmitz(a)uni-bonn.de> ==== >Moreover, are you sure that your system is finding texnansi.enc? >What does >kpsewhich texnansi.enc >produce? Ok I realize that my texfont problems are almost certainly related to my upgrade problems: a. From C:\TeXLive (old system) \system_fonts\timesnewroman>kpsewhich texnansi.enc c:/TeXLive/texmf/dvips/ly1/texnansi.enc so far so good b. From C\:ConTeXt (latest system) \system_fonts\timesnewroman>C:\ConTeXt\texmf-mswin\bin\kpsewhich texnansi.enc \system_fonts\timesnewroman> nothing found So I think my problems in part go back to something I asked before: how do I get my C\:ConTeXt tree to secondarily search the TeXLive tree? Thnx for all your help! Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

2 1

Conflict ConTeXt & new LM?
by Gerben Wierda 16 Mar '05

16 Mar '05

I just installed the latest LM fonts from TL Master on top of a teTeX 3.0 + recent ConTeXt and tried to re-run my project. This fails. I reinstalled the old LM and it works, Is this known? G ConTeXt ver: 2005.03.02 fmt: 2005.3.15 int: english mes: english language : language en is active <protectionstate 0> system : cont-new loaded (/usr/local/teTeX/share/texmf.local/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex! color : palette rollover is available ) system : cont-old loaded (/usr/local/teTeX/share/texmf.local/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/usr/local/teTeX/share/texmf.local/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys.rme loaded (/usr/local/teTeX/share/texmf.local/tex/context/user/cont-sys.rme (/usr/local/teTeX/share/texmf.local/tex/context/base/type-exa.tex) (/usr/local/teTeX/share/texmf.local/tex/context/base/type-syn.tex) (/usr/local/teTeX/share/texmf.local/tex/context/base/type-enc.tex) (/usr/local/teTeX/share/texmf.local/tex/context/base/type-dis.tex) (/usr/local/teTeX/share/texmf.local/tex/context/base/type-siz.tex) (/usr/local/teTeX/share/texmf.local/tex/context/base/type-map.tex) (/usr/local/teTeX/share/texmf.local/tex/context/base/type-spe.tex) (/usr/local/teTeX/share/texmf.local/tex/context/base/type-akb.tex)) bodyfont : 12pt rm is loaded kpathsea: Running mktextfm cork-lmr12 mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input cork-lmr12 This is METAFONT, Version 2.71828 (Web2C 7.5.4) kpathsea: Running mktexmf cork-lmr12 ! I can't find file `cork-lmr12'. <*> ...four; mag:=1; nonstopmode; input cork-lmr12 Please type another input file name ! Emergency stop. <*> ...four; mag:=1; nonstopmode; input cork-lmr12 Transcript written on mfput.log. grep: cork-lmr12.log: No such file or directory mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input cork-lmr12' failed to make cork-lmr12.tfm. kpathsea: Appending font creation commands to missfont.log. ! Font \*12ptrmtf*=cork-lmr12 not loadable: Metric (TFM) file not found. <to be read again> \relax \xxdododefinefont ...tspec {#4}\newfontidentifier \let \localrelativefontsiz... \fontstrategy ...ame #1\csname #2#3#4#5\endcsname \tryingfontfalse \fi <inserted text> ...yle \fontalternative \fontsize \fi \iftryingfont \fontstr... \synchronizefont ...strategy \the \fontstrategies \relax \fi \ifskipfontchar... <argument> \getvalue {\@style@ \fontstyle } \edef \fontstyle {\fontstyle }\if... ... l.1 \startproduct prd_book

2 3

RE: [NTG-context] Times New Roman
by ishamid 16 Mar '05

16 Mar '05

>===== Original Message From Adam Lindsay <atl(a)comp.lancs.ac.uk> ===== >A few comments/hints: Thank you! >On 16 Mar 2005, at 14:40, ishamid wrote: > >> TeXFont 1.5 - ConTeXt / PRAGMA ADE 2000-2001 (STILL BETA) > >The TeXfont I'm running is 2.2.1! (I know I added a little bit of .ttf >processing code after 2.1) Ok, I've got 2.2.1 running... >> I tried things manually without the --pattern option and got a >> >> texnansi-microsoft-times.tex > >If this file was generated, that's a good sign that the files were >installed. What do you see in: >(texlocal)\fonts\tfm\microsoft\times ? ok, there are tfm files there, produced by the beta TeXFont, in TeXLive\texmf-local\... But now I can't seem to repeat this with the latest version, and TeXFont does not find the afm files. As I told Taco: =========================================================== C:[...]\system_fonts>C:\ConTeXt\texmf-mswin\bin\texfont --vendor=microsoft --collection=timesnewroman --encoding=texnansi --pattern=times*.afm --rootlist=C:[...]\system_fonts TeXFont 2.2.1 - ConTeXt / PRAGMA ADE 2000-2004 mktexlsr: Updating c:/TeXLive/texmf-local/ls-R... mktexlsr: Done. encoding vector : texnansi vendor name : microsoft source path : . font collection : timesnewroman texmf font root : c:/texlive/texmf-local pdftex map file : texnansi-microsoft-timesnewroman.map processing files : all in pattern times*.afm locating afm files : using otf files processing aborted : no afm files found =========================================================== But the afm files are right there in \system_fonts!?! Any further suggestions will be appreciated! Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

2 1

RE: [NTG-context] Times New Roman
by ishamid 16 Mar '05

16 Mar '05

>===== Original Message From Adam Lindsay <atl(a)comp.lancs.ac.uk> ===== >On 16 Mar 2005, at 15:39, ishamid wrote: > >> But the afm files are right there in \system_fonts!?! >> >> Any further suggestions will be appreciated! >> >I'm pretty mac-centric, but I thought the TNR fonts were .ttf. That's right. >If texfont gets pointed to .ttf files, it runs ttf2afm itself, I thought. Well, I just followed the instructions in mag-0009.pdf. I created my own \system_fonts folder to do the work, then manually generated the afm's per Hans' instructions. After generating all four afms I called upn TeXFont from within the same directory with the generated afm's. In any case, I'm not sure that TeXFont generates the afm's, since it seems to be looking for them, or at least Hans' instructions do not use this method... >Also, did you run the generated test file? Yes, but that was created by the old TeXFont1.5. >Deadline or no, take it slowly and methodically: >pas de panique! C'est tres vrais, and always good advice! Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

1 0

RE: [NTG-context] Times New Roman
by ishamid 16 Mar '05

16 Mar '05

>===== Original Message From Taco Hoekwater <taco(a)elvenkind.com> ===== >I do not know much about the font installation process, but I did >notice that your TeXFont banner indicates that you use a really old >version. Ok, I've worked around this (still having upgrade troubles...) but there is still a problem. I created all afm files in a local directory system_fonts> but TeXFont does not seem to see them: ================================================================ [...]\system_fonts>C:\ConTeXt\texmf-mswin\bin\texfont --vendor=microsoft --collection=timesnewroman --encoding=texnansi --pattern=times*.afm --rootlist=C:\[...]\system_fonts TeXFont 2.2.1 - ConTeXt / PRAGMA ADE 2000-2004 mktexlsr: Updating c:/TeXLive/texmf-local/ls-R... mktexlsr: Done. encoding vector : texnansi vendor name : microsoft source path : . font collection : timesnewroman texmf font root : c:/texlive/texmf-local pdftex map file : texnansi-microsoft-timesnewroman.map processing files : all in pattern times*.afm locating afm files : using otf files processing aborted : no afm files found ================================================================ Why are "no afm files found"? And why does my new C:\ConTeXt tree recognize texmf font root : c:/texlive/texmf-local when I have not configured it to recognize my TeXLive tree (since I do not know how->) Best Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

1 0

Times New Roman
by ishamid 16 Mar '05

16 Mar '05

[I know that all of us and Hans in particular is quite busy but if anyone can give me some guidance on this, before I get into trouble with my editor...] Dear consortium, I'm having trouble preparing times new roman for ConTeXt. I'm trying to follow the instructions in mag-0009.pdf, but TeXfont does not want to behave:-( =========================================================== \system_fonts>texfont --vendor=microsoft --collection=times --encoding=texnansi --pattern=times*.afm TeXFont 1.5 - ConTeXt / PRAGMA ADE 2000-2001 (STILL BETA) processing aborted : unknown option --pattern=times*.afm =========================================================== I tried things manually without the --pattern option and got a texnansi-microsoft-times.tex file, from which I manually constructed a texnansi-microsoft-times.map file with four lines: =================================================== texnansi-raw-times 4 < times.pfb texnansi.enc texnansi-raw-timesbd 4 < timesbd.pfb texnansi.enc texnansi-raw-timesbi 4 < timesbi.pfb texnansi.enc texnansi-raw-timesi 4 < timesi.pfb texnansi.enc =================================================== I then tried manually constructing the tfm files with afm2tfm but alas... \system_fonts>afm2tfm times[bd|bi|i] ! no Adobe characters % LIGKERN ff l =: ffl ; ^ and empty tfm files Not sure where to go from here... I'm also going to need Arial from WINNT\Fonts as well... Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523 _______________________________________________ ntg-context mailing list ntg-context(a)ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

3 2

RE: [NTG-context] Upgrading...
by ishamid 16 Mar '05

16 Mar '05

>===== Original Message From Hans Hagen <pragma(a)wxs.nl> ===== >> ======================================================= >> C:\ConTeXt\texmf-mswin\web2c>aleph --ini *plain \dump >> This is Alephk, Version 3.141592-1.15-2.1-0.0-rc4 (Web2c 7.5.3) (INIALEPH) >> %&-line parsing enabled. > >this is a plain tex issue ... looks likemanfnt is not on your system 1. ok, how do I get C:\ConTeXt\texmf-mswin\bin to secondarily search C:\TeXLive, where manfnt is located? 2. Also, I need both pdfetex and aleph; how do I get both, since both texexec --make en -tex=aleph and texexec --make en -tex=pdfetex produce the same file, cont-en.fmt? Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

1 0

Re: [NTG-context] imposition for a pdf file
by Ciro A. Soto 16 Mar '05

16 Mar '05

Thank you. This should work. Ciro --- Hans Hagen <pragma(a)wxs.nl> wrote: > luigi.scarso wrote: > > Ciro A. Soto wrote: > > > >>I have a pdf file with 660 letter-size pages. > >>I would like to save toner in my printer by > >>printing 2 or 4 pages in one single sheet of > paper. > >> > >>Is it possible to do this with context? > >>or any other alternative? > >> > >>Remember, I don't have the source file, only the > pdf > >>file. > >> > >>thank you > >> > >>Ciro > > texexec --pdf --pdfcomb --comb=2*2 manypages.pdf > > >>_______________________________________________ > >>ntg-context mailing list > >>ntg-context(a)ntg.nl > >>http://www.ntg.nl/mailman/listinfo/ntg-context > >> > >> > >> > > As usually, not a direct answer... > > > > Play with these script > > %% > > %% save it as test.tex > > %% > > \setupcolors[state=start] > > \starttext > > \dorecurse{660}% > > {\startTEXpage[width=3cm,height=2cm] > > \vbox to \vsize{\vss > > \hbox to > > > \hsize{\hss\framed[width=2cm,align={middle,lohi},background=color,backgroundcolor=green]{p.\tfd\recurselevel}\hss} > > > \vss} > > \stopTEXpage} > > \stoptext > > > > %% > > %% save as my-imp.tex > > %% > > %% \setuplayout here > > \starttext > > \centerline{% > > \externalfigure[test][page=1] > > \externalfigure[test][page=3] > > \externalfigure[test][page=5] > > \externalfigure[test][page=7] > > \externalfigure[test][page=9] > > \externalfigure[test][page=11] > > } > > \blank[1cm] > > \centerline{% > > \externalfigure[test][page=2] > > \externalfigure[test][page=4] > > \externalfigure[test][page=6] > > \externalfigure[test][page=8] > > \externalfigure[test][page=10] > > \externalfigure[test][page=12] > > } > > \stoptext > > > > (you can create my-imp.tex by a script and > choosing the appropriate number > > for page=...., also use \setuplayout etc..) > > > > Also look for \setuparranging. > > > > luigi > > > > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > ntg-context mailing list > > ntg-context(a)ntg.nl > > http://www.ntg.nl/mailman/listinfo/ntg-context > > > -- > > ----------------------------------------------------------------- > Hans > Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | > The Netherlands > tel: 038 477 53 69 | fax: 038 477 53 74 | > www.pragma-ade.com > | > www.pragma-pod.nl > ----------------------------------------------------------------- > > _______________________________________________ > ntg-context mailing list > ntg-context(a)ntg.nl > http://www.ntg.nl/mailman/listinfo/ntg-context >

1 0

What's (in) a module?
by Thomas A.Schmitz 16 Mar '05

16 Mar '05

Two maybe related questions: 1. What constitutes a module? I wrote a couple of definitions and put them in a file t-foo.tex. When I write "\input t-foo" in the preamble of my document, everything works fine (so the file is found by TeX). When I say \usemodule[t-foo] or \usemodule[foo], I get "system : no macros found in module foo" and, obviously, "undefined control sequence." So: is there any special form for a module? I'm very curious because I defined a set of similar macros in another module, and everything works fine. 2. Is it possible to use a certain encoding file, enco-bar.tex, for parts of a file only? Could one define a macro (in a module???) that would do something like \switchtoencoding[bar] and switch back to the file's default encoding afterwards? Thanks to all, best Thomas

3 7

FLOWcharts
by Adam Duck 16 Mar '05

16 Mar '05

Hello, I'm having problems with the following chart (well, any chart, that is): --- ConTeXt code --- \setupoutput[pdftex] \usemodule[chart] \starttext \setupFLOWcharts[offset=50pt] \startFLOWchart[test] \startFLOWcell \name{one} \location{1,1} \text{one} \connect[bt]{two} \comment[r]{why} \comment[l]{is} \comment[l]{this} \stopFLOWcell \startFLOWcell \name{two} \location{1,2} \text{two} \stopFLOWcell \stopFLOWchart \midaligned{\FLOWchart[test]} \stoptext --- end --- It seems that every \comment-command pushes all text further down; i.e. "two" in the secons cell but also the other comments. version: TeXExec 5.2.4 - ConTeXt / PRAGMA ADE 1997-2005 texexec : TeXExec 5.2.4 - ConTeXt / PRAGMA ADE 1997-2005 texutil : TeXUtil 9.0.0 - ConTeXt / PRAGMA ADE 1992-2004 tex : pdfeTeX, 3.14159-1.10b-2.1 (Web2C 7.4.5) context : ver: 2005.01.31 cont-en : ver: 2005.01.31 fmt: 2005.3.8 mes: english total run time : 1 seconds and: %D \module %D [ file=m-chart, %D version=1998.10.10, bye, Adam.

3 2

RE: [NTG-context] Upgrading...
by ishamid 16 Mar '05

16 Mar '05

>===== Original Message From Idris Samawi Hamid <ishamid(a)colostate.edu> ===== >On Sat, 05 Mar 2005 23:51:50 +0100, h h extern <pragma(a)wxs.nl> wrote: > >> when needed, unzip the latest cont-tfm (beta) and cont-lmr archives in >> texmf-local and remake formats > >Where are the cont-lmr archives? I can't find them... Ok, I see that lmr comes with the mswincontext distribution, so cont-lmr will be put up if/when improvements are made? Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

2 1

RE: [NTG-context] Upgrading...
by ishamid 16 Mar '05

16 Mar '05

I must be making this way too complicated, anyway... I placed C:\ConTeXt\texmf-mswin\bin ahead of TeXLive in my NT PATH (Windows 2000) so those binaries get called first. I tried to make the aleph format: ======================================================= C:\ConTeXt\texmf-mswin\web2c>aleph --ini *plain \dump This is Alephk, Version 3.141592-1.15-2.1-0.0-rc4 (Web2c 7.5.3) (INIALEPH) %&-line parsing enabled. Copyright (c) 2002--2004 the Aleph task force entering extended mode (c:/ConTeXt/texmf/tex/plain/base/plain.tex Preloading the plain format: codes, registers, parameters, fonts, more fonts, ! Font \preloaded=manfnt not loadable: Metric (TFM/OFM) file not found. <to be read again> \par l.468 ? ======================================================= It works fine in TeXLive. Another problem: how can I have both the aleph and the pdfetex formats? texexec --make en -tex=aleph overides the default cont-en.fmt made by texexec --make Question: how can I configure mktexlsr so that it updates both C:\ConTeXt as well as C:\TeXLive? best Idris Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

2 1

ppchtex
by Johannes Werner 16 Mar '05

16 Mar '05

hi everyone, i want to use PPCHTEX. when i process my .tex-file with texexec i get the message: ..... specials : fdf loaded ) specials : fdf,tpd loaded \openout6 = `chemie-mpgraph.mp'. Randomizer initialized to 1275417501. [MP to PDF] (./chemie-mpgraph.4000)) * and the program stops and waits for a command. when i type \end it continues. this happens again and then i have my target file. what wants the system tell me? why does it stop?. it's irksome, to type in a command for nothing. when i process with latex everything is ok. This is pdfeTeX, Version 3.14159-1.10b-2.1 (Web2C 7.4.5) (format=cont-en 2005.2.23) 15 MAR 2005 18:08 entering extended mode **&cont-en chemie.tex (./chemie.tex{/usr/share/texmf/pdftex/config/pdftex.cfg Warning: pdfetex (file /usr/share/texmf/pdftex/config/pdftex.cfg): expected num ber in ^^J returning 10 } ConTeXt ver: 2003.1.31 fmt: 2005.2.23 int: english mes: english language : language en is active <protectionstate 0> system : cont-new loaded (/usr/share/texmf/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex! system (E-TEX) : [line 726] \ifcsname ) system : cont-old loaded (/usr/share/texmf/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/usr/share/texmf/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (/usr/share/texmf/tex/context/base/cont-sys.tex symbols : loading symbolset nav (/usr/share/texmf/tex/context/base/symb-nav.tex pdftex : needs map file: original-context-symbol.map pdftex : needs map file: pl0-ams-cmr.map pdftex : needs map file: original-vogel-symbol.map ) symbols : loading symbolset mvs (/usr/share/texmf/tex/context/base/symb-mvs.tex encoding : coding default )) bodyfont : 12pt rm is loaded language : patterns 2:2-en-2 3:2-uk-2 4:2-de-2 5:2-fr-2 6:2-es-2 7:2-it-2 8:2-nl-2 loaded specials : tex,postscript,rokicki loaded \openout2 = `chemie.tui'. system : chemie.top loaded (./chemie.top) \openout0 = `chemie-mpgraph.mp'. \openout0 = `chemie-mprun.mp'. \openout0 = `mpgraph.mp'. \openout0 = `mprun.mp'. system : macros of module pictex loaded (/usr/share/texmf/tex/context/base/m-pictex.tex (/usr/share/texmf/tex/generic/pictex/pictex.tex)) system : macros of module chemie loaded (/usr/share/texmf/tex/context/base/m-chemic.tex (/usr/share/texmf/tex/context/base/ppchtex.tex ppchtex : using PiCTeX and MetaPost )) specials : loading definition file tpd (/usr/share/texmf/tex/context/base/spec-tpd.tex specials : loading definition file fdf (/usr/share/texmf/tex/context/base/spec-fdf.tex <unprotect 3> system (E-TEX) : [line 1815] \ifcsname <unprotect 4> <protect 4> <protect 3>) specials : fdf loaded ) specials : fdf,tpd loaded \openout6 = `chemie-mpgraph.mp'. Randomizer initialized to 1275417501. [MP to PDF] (./chemie-mpgraph.4000)) *\end (./chemie.tuo) [1.1{/usr/share/texmf/dvips/config/pdftex.map}{/usr/share/texmf/ dvips/config/context.map Warning: pdfetex (file /usr/share/texmf/dvips/config/context.map): entry for `c ontnav' already exists, duplicates ignored }] systems : end file chemie at line 0 [flush and process chemie-mpgraph.mp afterwards] Here is how much of TeX's memory you used: 1875 strings out of 68091 26307 string characters out of 753759 4453238 words of memory out of 5569124 31612 multiletter control sequences out of 10000+50000 10565 words of font info for 35 fonts, out of 500000 for 1000 62 hyphenation exceptions out of 1000 43i,16n,48p,313b,587s stack positions out of 1500i,500n,5000p,200000b,5000s 10 PDF objects out of 300000 0 named destinations out of 131072 0 words of extra memory for PDF output out of 65536 </usr/share/texmf/fonts/type1/b luesky/cm/cmr9.pfb></usr/share/texmf/fonts/type1/bluesky/cm/cmr12.pfb> Output written on chemie.pdf (1 page, 5873 bytes).

3 5

Re: [NTG-context] Times New Toman
by ishamid 16 Mar '05

16 Mar '05

Dear fellow conspirators, more about my attempts to get times new roman working: I could find neither context.cnf nor type-mws.tex in the distribution. Anyway, here is my attempt at a typescript file: note that arial provides the companion sans serif: any comments will be appreciated. Question: What is "\typescriptthree"? I'm assuming there is also a [font:fallback:serif] option. Best Idris =========================================================== \starttypescript [serif] [timesnewroman] [name] \setups[font:fallback:serif] \definefontsynonym[Serif] [TimesNewRoman] \definefontsynonym[SerifBold] [TimesNewRoman-Bold] \definefontsynonym[SerifItalic] [TimesNewRoman-Italic] \definefontsynonym[SerifBoldItalic][TimesNewRoman-BoldItalic] \stoptypescript \starttypescript [serif] [timesnewroman] [texnansi] \definefontsynonym [TimesNewRoman] [\typescriptthree-timesnewroman] [encoding=\typescriptthree] \definefontsynonym [TimesNewRoman-Bold] [\typescriptthree-timesnewromanb] [encoding=\typescriptthree] \definefontsynonym [TimesNewRoman-Italic] [\typescriptthree-timesnewromani] [encoding=\typescriptthree] \definefontsynonym [TimesNewRoman-BoldItalic] [\typescriptthree-timesnewromanz] [encoding=\typescriptthree] \stoptypescript \starttypescript [map] [timesnewroman] [texnansi] \loadmapfile[texnansi-microsoft-timesnewroman.map] \stoptypescript \usetypescriptfile[type-tnr] \definetypeface [timesnewroman] [ss] [sans] [arial] [default] [encoding=texnansi] \definetypeface [timesnewroman] [rm] [serif] [timesnewroman] [default] [encoding=texnansi,rscale=1.1] \definetypeface [timesnewroman] [mm] [math] [palatino] [default] [encoding=texnansi,rscale=1.1] \definetypeface [timesnewroman] [tt] [mono] [modern] [default] [encoding=texnansi,rscale=1.25] =========================================================== Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

2 1